GaGe PCIe Digitizer Data Sheet

12-Bit PCIe Gen3 EON Express
GaGe is a worldwide industry leader
in high speed
data acquisition
solutions featuring a portfolio of the
Unprecedented Speed & Resolution in a 6 GS/s Streaming Digitizer
1.75 GHz Bandwidth with Stream Rates at 4 GB/s
highest performance digitizers, PC
oscilloscope software, powerful SDKs
for custom application development,
and turnkey integrated PC-based
measurement systems.
APPLICATIONS
FEATURES
Wideband Signal Analysis

1 Channel at 6 GS/s or 2 Channels at 3 GS/s
RADAR Design and Test

1.75 GHz Analog Input Bandwidth
Signals Intelligence (SIGINT)

12-Bits Vertical A/D Resolution
Ultrasonic Non-Destructive Testing

4 GB or 8 GB Onboard Acquisition Sample Memory
LIDAR Systems

FPGA Based Applications for Real-Time DSP Functions
Communications

Dual Port Memory with Sustained PCIe Data Streaming at 4 GB/s
Optical Coherence Tomography

Full-Featured Front-End with DC or AC Coupling and 50 Ω Inputs
Spectroscopy

Software Control of Input Voltage Ranges
High-Performance Imaging

Ease of Integration with External or Reference Clock In & Clock Out
Time of Flight

External Trigger In & Trigger Out
Life Sciences

Larger Synchronized Multi-Channel Systems in Master/Slave Mode
Particle Physics

Full Height ¾ Length PCI Express (PCIe) Generation 3.0 x8 Card

Programming-Free Operation with GaGeScope PC Oscilloscope Software

Software Development Kits Available for C/C#, LabVIEW and MATLAB

Windows 8, Windows 7, and Linux Operating Systems Supported
www.gage-applied.com
MAIN SPECIFICATIONS
Model #
# of Input Channels
Max. Rate per Channel
Vertical A/D Resolution
A/D SAMPLING
:
:
:
:
CSE123G2
2
3 GS/s
12-bits
CSE126G1
1
6 GS/s
12-bits
Rates per Channel
(software selectable)
:
Rate Accuracy
:
ANALOG INPUT CHANNELS
Connectors
Impedance
Coupling
Analog Bandwidth
Voltage Ranges
:
:
:
:
:
DC User Offset
:
Absolute Max. Input
:
SMA
50 Ω
DC (standard) or AC (option)
1.75 GHz
±100 mV, ±200 mV, ±500 mV,
±1 V, ±2 V, ±5 V
(software selectable)
Spans Full Scale Input Range
(FSIR) (software selectable)
±6 V (over-voltage protection
included)
6 GS/s, 3 GS/s, 1.5 GS/s, 1 GS/s,
750 MS/s, 500 MS/s, 375 MS/s,
250 MS/s, 187.5 MS/s, 125 MS/s,
75 MS/s, 50 MS/s, 30 MS/s,
20 MS/s, 10 MS/s, 4 MS/s, 2 MS/s,
1 MS/s, 500 kS/s, 200 kS/s,
100 kS/s, 50 kS/s, 20 kS/s, 10 kS/s,
5 kS/s, 2 kS/s, 1 kS/s
1 part-per-million
ACQUISITION MEMORY1
Standard Size
Optional Sizes
Architecture
Data Streaming
1
:
:
:
:
4 GB
8 GB
Dual Port
Yes
Acquisition memory size is shared and equally divided
among all active input channels (1 or 2).
www.gage-applied.com
TRIGGERING
CLOCK OUT
Engines
:
Source
:
Input Combination
:
Slope
:
Sensitivity2
:
2 per Channel,
1 for External Trigger
Any Input Channel,
External Trigger or Software
All Combinations of Sources
Logically OR’ed
Positive or Negative
(software selectable)
±5% of Full Scale Input Range of
Trigger Source
EXTERNAL TRIGGER
Connector
Impedance
Coupling
Bandwidth
Voltage Range
:
:
:
:
:
:
SMA
0 – 1.5 V
50 Ω Compatible
50%
Half Sampling Clock Frequency
or 10 MHz Reference Clock
Minimum 200 MHz,
Maximum 3 GHz
10 MHz (from External Clock)
Sampling Clock
Mode Rates
10 MHz Reference
Clock Mode Rate
:
:
Up to FPGA Memory Size
:
One Sample Clock Cycle
Master/Slave Mode
:
Independent Mode
:
Provides synchronized triggering
and sampling on all channels for
all cards to create larger multichannel systems.
Each card operates
independently within the
system.
MULTIPLE RECORD
:
:
:
:
:
SMA
≈ 1k Ω
AC
>100 MHz
0-3 V (unipolar)
Pre-Trigger Data
TIME-STAMPING
Timing Resolution
MULTI-CARD SYSTEMS
TRIGGER OUT
Connector
Impedance
Amplitude
Connector
Signal Level
Impedance
Duty Cycle
Output Modes
:
:
:
SMA
50 Ω
0 – TTL
CLOCK IN
Connector
Signal Level
:
:
Impedance
Coupling
Duty Cycle
Input Modes
:
:
:
:
External Clock
Mode Rates
Variable/Inactive
External Clock Mode
:
:
SMA
Minimum 0.2 V RMS,
Maximum 0.5 V RMS
50 Ω
DC
50% ±5%
External Clock or
10 MHz Reference Clock
Minimum 200 MHz,
Maximum 3 GHz
Supports variable rate k-clocking
or inactive external clock,
particularly useful for OCT
applications.
DIMENSIONS
Size
:
Single Slot, Full Height, ¾ Length
:
25 Watts (typical)
POWER CONSUMPTION
Power
PC SYSTEM REQUIREMENTS
PCI Express (PCIe) Slot
:
Operating System
:
2
Signal amplitude must be at least 10% of Full Scale Input
Range of Trigger Source to cause a trigger event. Smaller
signals are rejected as noise.
www.gage-applied.com
1 Free Full-Height PCIe Gen1,
Gen2 or Gen3, x8 or x16 Slot
Windows 7 (32-bit/64-bit),
Windows 8 (32-bit/64-bit),
Linux – Requires SDK for C/C#
ORDERING INFORMATION
Hardware
Model
Number
Platform
Interface
# of
Channels
Max.
Sampling
Rate per
Channel
Memory
Size
Order
Part Number
CSE123G2
PCIe
2
3 GS/s
4 GB
ENE-123-G20
CSE126G1
PCIe
1
6 GS/s
4 GB
ENE-126-G10
Memory Upgrades
Memory Upgrade: 4 GB to 8 GB
ENE-181-001
Front End Upgrades
AC-Coupled Front End Option
ENE-FAC-001
Cable Accessories
Set 1 Cable SMA to BNC
ACC-001-031
Set 4 Cable SMA to BNC
ACC-001-033
eXpert FPGA Firmware Options
eXpert PCIe Data Streaming
STR-181-000
eXpert Digital Down Conversion (DDC)
250-181-005
eXpert Signal Averaging
250-181-001
eXpert Fast Fourier Transform (FFT)
250-181-004
GaGeScope Software
GaGeScope: Lite Edition
Included
GaGeScope: Standard Edition
300-100-351
GaGeScope: Professional Edition
300-100-354
900 N. State St.
Lockport, IL 60441-2200
Software Development Kits (SDKs)
GaGe SDK Pack (includes C/C#, MATLAB, LabVIEW SDKs)
200-113-000
CompuScope SDK for C/C#
200-200-101
CompuScope SDK for MATLAB
200-200-102
CompuScope SDK for LabVIEW
200-200-103
Toll-Free (USA and Canada):
Phone: 1-800-567-4243
Fax: 1-800-780-8411
Direct:
Phone: 1-514-633-7447
Fax: 1-514-633-0770
WARRANTY
Standard two years parts and labor.
Email:
Unless otherwise specified, all dynamic performance specs have been qualified on
engineering boards. All specifications subject to change without notice.
[email protected]
To find your local sales representative or
distributor or to learn more about GaGe
products visit:
Updated February 2, 2015
GaGe is a product brand of DynamicSignals LLC, an ISO 9001:2008 Certified Company
Copyright © 2015 DynamicSignals LLC. All rights reserved.
www.gage-applied.com
www.gage-applied.com