Quick Release Couplings HT-Series ISO16028 Flushface Interchange Interchange Data: Materials: Seal Components: • Interchangeable to ISO 16028 • Parker FEM-Series, Snap-Tite 74-Series, Aeroquip/Eaton FD89, Safeway FF49-Series • Hansen FF, Stucchi FIRG/Series ‘A’, Faster FFN/FFI/2FFN/2FFH, Cjen X65 Series, Holmbury Flat Face ISO 16028, Rectus/ Tema - IF Series • Machined components are manufactured using solid steel or 316 stainless steel bar stock •S tainless steel balls, retaining rings, and springs maximize corrosion resistance and extend service life •S teel components are plated using ROHS compliant trivalent chrome • Steel coupler sleeves are hardened to resist deformation and maximize service life • Steel nipples are hardened to provide resistance to brinneling during impulse service • ¼” to ¾” nipples have moulded Polyurethane valve seals, with a temperature range of -54°C to +100°C (-65°F to +212°F) • 1” nipples have nitrile-energised PTFE valve seals, with a temperature range of -40°C to +121°C (-40°F to +250°F) • Couplers have a polyurethane valve stem O-Ring, with a temperature range of -54°C to +100°C (-65°F to +212°F) • Ancillary coupler and nipple seals are Nitrile (Buna-N), temperature range of -40°C to +121°C (-40°F to +250°F) • PTFE anti-extrusion ring protects main coupling valve seal from dynamic impulse pressure damage interchangeUS Industryinternational Specifications MILITARYstandardsstandards 3/8” 1/4” 1/2” 5/8” 3/4” - - - - - - 1” HTMA x x x x x ISO16028 ISO16028 ISO16028 ISO16028 ISO16028 ISO16028 ansi/ nfpa T3.20.15-1991 x x x x x x These particular sizes are not outlined within the documented standard category. ‘ht’ seriesparkersnap-titefasterholmbury interchange 3/8” 1/4” 1/2” 5/8” 3/4” 1” ff-series fe-series fe-series fe-series fe-series - 74 74 74 74 74 74 Series Series Series Series Series Series FFN/2FFN/2FFI FFI/2FFI/3FFI FFI/2FFI/3FFI FFI/2FFI/3FFI FFI/2FFI/3FFI FFI/2FFI/3FFI Series Series Series Series Series Series ‘A’ ‘A’ ‘A’ ‘A’ ‘A’ ‘A’ HT-SERIES ISO16028 FLUSHFACE INTERCHANGE (COUPLER DUST CAP) Note: Fits Dixon/Perfecting couplers only Part NO. 3HTDP 4HTDP 5HTDP 6HTDP 8HTDP Body Size cap lanyard Body Material 3/8” 1/2” 5/8” 3/4” Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer 1” HT-SERIES ISO16028 FLUSHFACE INTERCHANGE (NIPPLE DUST CAP) Note: Fits all ISO 16018 nipples Part NO. HT3DC HT4DC HT5DC HT6DC HT8DC Body Size cap lanyard Body Material 3/8” 1/2” 5/8” 3/4” Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer Elastomer 1” 22 TEL +3170 413 07 50 | WWW.TEESING.COM Quick Release Couplings HT-SERIES ISO16028 FLUSHFACE INTERCHANGE (COUPLER) (Female Thread) Part NO. Body SizeTHREAD SIZE 1/4” 2HTF2 1/4”-18NPTF 1/4” 2HTBF2 1/4”-19BSPP 3/8” 3/8”-18 NPTF 3HTF3 3/8” 3/8”-18 NPTF 3HTF3-SS 3/8” 9/16-18 ORB 3HTOF3 3/8” 3HTBF3 G3/8”BSPP 3/8” 3HTBF3-SS G3/8”BSPP 3/8” 1/2-14 NPTF 3HTF4 3/8” 1/2-14 NPTF 3HTF4-SS 3/8” 3/4”-16 ORB 3HTOF4 3/8” 3HTBF4 G1/2” BSPP 3/8” 3HTBF4-SS G1/2” BSPP 1/2” 1/2”-14 NPTF 4HTF4 1/2” 1/2-14 NPTF 4HTF4-SS 1/2” 3/4”-16 ORB 4HTOF4 1/2” 4HTBF4 G1/2” BSPP 1/2” 4HTBF4-SS G1/2” BSPP 1/2” 7/8”-14 ORB 4HTOF5 1/2” 3/4” -14 NPTF 4HTF6 1/2” 3/4”-14 NPTF 4HTF6-SS 1/2” 4HTOF6 11/16”-12 ORB 1/2” 4HTBF6 G3/4” BSPP 1/2” 4HTBF6-SS G3/4” BSPP 5/8” 7/8”-14 ORB 5HTOF5 5/8” 3/4”-14 NPTF 5HTF6 5/8” 3/4”-14 NPTF 5HTF6-SS 5/8” 5HTOF6 11/16”-12 ORB 5/8” 5HTBF6 G3/4” BSPP 5/8” 5HTBF6-SS G3/4” BSPP 3/4” 7/8”-14 ORB 6HTOF5 3/4” 3/4”-14 NPTF 6HTF6 3/4” 3/4”-14 NPTF 6HTF6-SS 3/4” 6HTOF6 11/16”-12 ORB 3/4” 6HTBF6 G3/4” BSPP 3/4” 6HTBF6-SS G3/4” BSPP 3/4” 6HTF8 1”-111/2 NPTF 3/4” 6HTF8-SS 1”-111/2 NPTF 3/4” 6HTOF8 15/16”-12 ORB 3/4” 6HTBF8 G1” BSPP 3/4” 6HTBF8-SS G1” BSPP 8HTF8 1” 1”-111/2 NPTF 8HTF8-SS 1” 1”-111/2 NPTF 8HTOF8 1” 15/16 -12 ORB 8HTBF8 1” G1” BSPP 8HTBF8-SS 1” G1” BSPP 8HTF10 1” 11/4”-111/2 NPTF 8HTF10-SS 1” 11/4”-111/2 NPTF 8HTOF10 1” 15/8”-12 ORB 8HTBF10 1” G11/4” BSPP 8HTBF10-SS 1” G11/4” BSPP Body Material 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316 Steel Steel Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel HT SERIES ISO16028 FLUSHFACE INTERCHANGE (COUPLER) (Male Thread) Part NO. Body SizeTHREAD SIZE 3/8” 3/8”-18 NPTF 3HTM3 3/8” 1/2”-14 NPTF 3HTM4 3/8” 3/4”-16 ORB 3HTOM4 1/2” 7/8”-14 JIC BH 4HTJB5 1/2” 4HTRB5 1”-14 ORFS BH 1/2” 4HTJB6 11/6”-12 JIC BH Body Material Steel Steel Steel Steel Steel Steel IMPORTANT Although a special lubricant is used to protect the flushface seals during pre-service storage, the seals are still vulnerable until they are exposed to the system fluid. It is recommended to lubricate the seals before the first connection by placing a drop of oil into the main valve grooves on the face of the nipple. 23 TEL +3170 413 07 50 | WWW.TEESING.COM Quick Release Couplings HT-Series ISO16028 Flushface Interchange (Nipple) (Female Thread) Part NO. Body SizeTHREAD SIZE HT2F2 HT2BF2 HT3F3 HT3F3-SS HT3OF3 HT3BF3 HT3BF3-SS HT3F4 HT3F4-SS HT3OF4 HT3BF4 HT3BF4-SS HT4F4 HT4F4-SS HT4OF4 HT4BF4 HT4BF4-SS HT4OF5 HT4F6 HT4F6-SS HT40F6 HT4BF6 HT4BF6-SS HT50F5 HT5F6 HT5F6-SS HT5OF6 HT5BF6 HT5BF6-SS HT6OF5 HT6F6 HT6F6-SS HT6OF6 HT6BF6 HT6BF6-SS HT6F8 HT6F8-SS HT6F8 HT6BF8 HT6BF8-SS HT8F8 HT8F8-SS HT80F8 HT8BF8 HT8BF8-SS HT8F10 HT8F10-SS HT80F10 HT8BF10 HT8BF10-SS 1/4” 1/4” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” Body Material 1/4”-18 NPTF BSPP 3/8”-18 NPTF 3/8”-18 NPTF 9/16”-18 ORB G3/8” BSPP G3/8” BSPP 1/2”-14 NPTF 1/2”-14 NPTF 3/4”-16 ORB G1/2” BSPP G1/2” BSPP 1/2”-14 NPTF 1/2”-14 NPTF 3/4”-16 ORB G1/2” BSPP G1/2” BSPP 7/8”-14 ORB 3/4”-14 NPTF 3/4”-14 NPTF 11/16”-12 ORB G3/4” BSPP G3/4” BSPP 7/8”-14 ORB 3/4”-14 NPTF 3/4”-14 NPTF 11/16”-12 ORB G3/4” BSPP G3/4” BSPP 7/8”-14 ORB 3/4”–14 NPTF 3/4”-14 NPTF 11/16”- 12 ORB G3/4” BSPP G3/4” BSPP 1” -111/2 NPTF 1” - 111/2 NPTF 15/16”-12 ORB G1” BSPP G1” BSPP 1”-111/2 NPTF 1”-111/2 NPTF 15/16”-12 ORB G1” BSPP G1” BSPP 11/4”-111/2 NPTF 11/4”–111/2 NPTF 15/8”-12 ORB G11/4” BSPP G11/4” BSPP 1/4”-19 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316 316 Steel Steel Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel HT-Series ISO16028 Flushface Interchange (Nipple) (Male Thread) Part NO. HT3M3 HT3M4 HT3OM4 HT4JB5 HT4RB5 HT4JB6 Body SizeTHREAD SIZE 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 3/8”-18 NPTF NPTF 3/4”-16 ORB 7/8”-14 JIC BH 1”-14 ORFS BH 11/6”-12 JIC BH 1/2”–14 Body Material Steel Steel Steel Steel Steel Steel IMPORTANT Although a special lubricant is used to protect the flushface seals during pre-service storage, the seals are still vulnerable until they are exposed to the system fluid. It is recommended to lubricate the seals before the first connection by placing a drop of oil into the main valve grooves on the face of the nipple. 24 TEL +3170 413 07 50 | WWW.TEESING.COM
© Copyright 2024 ExpyDoc
