Stainless Steel Belt Conveyor Conveyor Alternations 1

C_1263-1264_F17-38_USA
Stainless Steel Belt Conveyor
CE
Compliant
End Drive, 3-Groove Frame (Pulley Dia. 50mm)
USA Final
Conveyor Alternations 1
Motor Position Reversed / Specify Drive Section Location / Additional Counterbores / One or Both Ends Roller Edge / Motor Cover with Window
Q Features: Stainless steel belt conveyor that excels in flatness, heat resistance and electrical conductivity.
CVSSA
Belt Speed (m/min)
Gearhead
Reduction Ratio
50Hz
60Hz
12.5
18.8
22.6
15
15.7
18.8
18
13.1
15.7
25
9.4
11.3
30
7.9
9.4
36
6.5
7.9
50
4.7
5.7
60
3.9
4.7
75
3.1
3.8
90
2.6
3.1
100
2.4
2.8
120
2.0
2.4
150
1.6
1.9
180
1.3
1.6
15
20
Capacitor
Single-phase
Constant Speed Motor Only
25
CVSSA
Part
Number -
Length L
5mm
Increment
40~150
1.1
Capacitor
Single-phase
Constant Speed Motor Only
Motor
Output
(W)
Voltage (V)
Specification
6
25
40
(Single-Phase)
TA100
TA110 TA115
TA200
TA220 TA230
25
40
(Three-Phase)
SA200
SA220 SA230
IM
(Constant Speed Motor)
SCM
(Variable Speed Motor)
IM (Constant Speed Motor)
INV (Induction Motor +
Inverter)
6
25
40
NV (No Motor)
250~2000
B
CVSSA
40~60
70~90
100~120
130~150
-
A*
89
99.7
#90
NM (No Motor)
Gearhead Reduction
Ratio
- T100 -
SCM
-
30
90
(MK, MP, FYA, FYB, HR, MR, WR, CW)
-
HR
S
B
-
+0.2
0
Specify Drive Section Position
Direction of Conveyance
Detail B (for M6)
MP
Motor
Length (A)
101.0
108.0
105.0
115.0
120.0
127.0
111.0
118.0
115.0
125.0
126.9
132.9
115.0
117.0
127.5
129.0
136.0
125.0
127.0
137.5
139.5
146.5
142.0
147.0
165.0
164.6
173.6
152.0
157.0
175.0
175.1
184.1
Applicable Conveyors
SVKN, SVKR
SVKN, SVKR (HR)
SVKN, SVKR (MR)
SVKN, SVKR (WR)
CVGN, CVGP
CVGN, CVGP (HR)
CVGN, CVGP (MR)
CVGN, CVGP (WR)
CVGR, CVGW
CVGR, CVGW (HR)
CVGR, CVGW (MR)
CVGR, CVGW (WR)
CVSTR
CVSJA
CVGTN
CVGTP
CVSX, CVSY
CVLPA
Additional Counterbores
MP
67≤MP≤L-300
90≤MP≤L-300
63≤MP≤L-330
90≤MP≤L-330
68≤MP≤L-302
73≤MP≤L-302
68≤MP≤L-312
73≤MP≤L-312
93≤MP≤L-317
93≤MP≤L-317
93≤MP≤L-332
93≤MP≤L-332
123≤MP≤L-208
71≤MP≤L-162
79≤MP≤L-203
89≤MP≤L-269
122≤MP≤L-381
75≤MP≤L-320
Applicable Conveyors
SVKA, SVKB
SVKN, SVKR
SVKN, SVKR (HR)
SVKN, SVKR (MR)
SVKN, SVKR (WR)
CVGA, CVGB
CVGC, CVGD
CVGN, CVGP
CVGN, CVGP (HR)
CVGN, CVGP (MR)
CVGN, CVGP (WR)
CVGR, CVGW
CVGR, CVGW (HR)
CVGR, CVGW (MR)
CVGR, CVGW (WR)
CVGTA
CVGTB
CVGTN
CVGTP
CVMA, CVMB
CVSMB
CVDSA, CVDSB
Center Drive
FYB
FYA
Head Drive
FYB
FYA
CVSTD
CVSPC
FYA, FYB
150≤FYA, FYB≤ (L-105)
65≤FYA, FYB≤ (L-65)
95≤FYA, FYB≤ (L-65)
65≤FYA, FYB≤ (L-95)
95≤FYA, FYB≤ (L-95)
150≤FYA, FYB≤ (L-60)
180≤FYA, FYB≤ (L-75)
60≤FYA, FYB≤ (L-60)
75≤FYA, FYB≤ (L-60)
60≤FYA, FYB≤ (L-75)
75≤FYA, FYB≤ (L-75)
75≤FYA, FYB≤ (L-75)
90≤FYA, FYB≤ (L-75)
75≤FYA, FYB≤ (L-90)
90≤FYA, FYB≤ (L-90)
150≤FYA, FYB≤ (L-70)
180≤FYA, FYB≤ (L-65)
70≤FYA, FYB≤ (L-70)
65≤FYA, FYB≤ (L-65)
170≤FYA, FYB≤ (L-60)
220≤FYA, FYB≤ (L-155)
180≤FYA, FYB≤ (L-75)
1000≤L<1100:150≤FYA, FYB≤L-150
1100≤L:135≤FYA, FYB≤L-135
190≤FYA, FYB≤ (L-130)
MP
Drive section position can be specified.
Ordering Code MP152
MP = 1mm Increment
E
Only the Center Drive Type can be specified.
The belt support rollers will be relocated to appropriate
E
locations.
MP dim. tolerance will be ±1 based on belt thickness.
E
See the Application Chart on the next page for the
E
applicable part numbers.
FYA
FYB
Additionally machine counterbores for inserting nuts on the
frames on the near and far sides.
Ordering Code FYA300 FYB600
FYA, FYB = 5mm Increment
E
FYB-FYA≥15
E
Specifiable ranges are as shown below.
E
See the Application Chart on the next page for the
E
applicable part numbers.
One End Roller Edge
Carrying Direction
One end of the conveyor can be changed to a roller edge.
Ordering Code HR MR
Carrying Direction
L
Configure Online
20
HR (Left Roller Edge)
HR
MR
MR (Right Roller Edge)
Both Ends Roller Edge
R (No Motor, Gearhead)
Configure Online
h
WR
20
20
Motor
Motor
F - Manufacturer
Gearhead Output - Voltage - Specification - Reduction
Selection
Ratio
- F500 CVSSA - 100 - 1000 - 25 - T100 - IM 25
A
1 -1263
-
L
-
Only the Center Drive Type can be specified.
E25W or larger motor can be selected.
For CVGN and CVGP, L dim. of 350mm or above is
E
available, and for SVKN, SVKR, CVGR and CVGW, L dim. of
450mm or above is available.
XB (Belt Width) 201mm or more is not available
See the Application Chart on the next page for the
E
applicable part numbers.
Motor Cover with Window
-
Center Drive
CW
B
Only the Center Drive Type can be specified.
E25W or larger motor can be selected.
For CVGN and CVGP, L dim. of 350mm or above is
E
available, and for SVKN, SVKR, CVGR and CVGW, L dim. of
450mm or above is available.
XB(Belt Width) 201mm or more is not available
See the Application Chart on the next page for the
E
applicable part numbers.
Both ends of the conveyor can be changed to a roller edge.
Ordering Code WR
Carrying Direction
L
Head Drive
Part Number
Configure Online
Only the Head Drive Type can be specified.
See the Application Chart on the next page for the
E
applicable part numbers.
XFor CVSTD and center drive conveyors, counterbores
in the drive section cannot be specified.
F
Motor Manufacturer
(Additional Counterbores)
Selection
5mm Increment
EThe prices vary by manufacturer.
A (Panasonic Motor)
B (Oriental Motor)
240<F<L-180
* When not specified, there C (Taiwanese Motor)
will be no additional
counterbores.
Spec
Motor position can be changed.
Ordering Code MK
Carrying Direction
2.5 6 1.5
Motor
Output
Reduction
(W)
Specification Manufacturer Ratio
12.5~25
Panasonic
30~180
12.5~25
Constant Speed
Oriental
Motor
30~180
12.5~75
Taiwanese
90~180
6W
12.5~25
Panasonic
30~180
12.5~25
Variable Speed
Oriental
Motor
30~180
12.5~75
Taiwanese
90~180
Panasonic
12.5~180
12.5~18
Oriental
Constant Speed
25~180
Motor
12.5~75
Taiwanese
90~180
25W
Panasonic
12.5~180
12.5~18
Oriental
Variable Speed
25~180
Motor
12.5~75
Taiwanese
90~180
Panasonic
12.5~180
12.5~18
Oriental
Constant Speed
25~180
Motor
12.5~75
Taiwanese
90~180
40W
Panasonic
12.5~180
12.5~18
Oriental
Variable Speed
25~180
Motor
12.5~75
Taiwanese
90~180
NH (No Gearhead)
-
Code
20
12.5 15 18 25
36 50 60 75
100 120 150 180
Motor
Belt
- Specification - Manufacturer Selection
Motor
10.2+0.5
0
6.2
+0.3
0
5.7
3.2
25.1
25
Gearhead
Reduction
Ratio
50
MK
24
Available Sizes
L250~ L305~ L405~ L505~ L605~ L705~ L805~ L905~ L1005 L1105 L1205 L1305 L1405 L1505 L1605 L1705 L1805 L1905
300
400
500
600
700
800
900
1000 ~1100 ~1200 ~1300 ~1400 ~1500 ~1600 ~1700 ~1800 ~1900 ~2000
-
Output - Voltage - Specification -
Motor
ERotating direction of the belt is the same as motor rotating direction when gear ratio is 25 or less, and the opposite when gear ratio is 30 or more. ESince the belt thickness is 0.1mm, not suitable for accumulating conveyance EFor connection diagram and inverter details, see P.1267.
EWhen "No motor, gearhead" is selected, the motor mounting hole pitch will vary depending on the motor's power rating. Please see Technical Information in our Conveyor Selection web site for the dimension details.
EWhen "No motor, gearhead" is selected, this unit will be delivered unassembled. The customer is to assemble the unit according to the included assembly instructions. See our Conveyor Selection site for assembly procedures and packaging details.
Part
Number
-
- 120 - 1350 -
L
Width B
10mm
Increment
L
Alterations
15.4 -0.6 2.2 0
46 ±0.35
48
8 30
16 17
24
B+10
B+16
(Frame Width)
B+36
18
B+76
B: Belt Width 58
40
195
156.1
57.4
#80
-
Motor Position Reversed
Motor Specifications
40W Motor Type
100.8
CVGP
2-Ø5
B
ECompatible with JIS standard hex nuts.
#60
89
R0.5
Detail B
Detail A (for M3)
Belt Speed (m/min)
Part
Number
30
+0.3
23 0
2.5 3 1.5
100.8
A*
B+76
18 B: Belt Width 58
40
Transfer Mass (kg/Unit)
30
Ø50
M5 Screw for Tension
Ø50
156.1
55.4
10
160
Counterbore for Nuts*
1.1
5
80
L: Distance between Pulleys
195
5
0
189.5
25W Motor Type
10
0
25.1
Direction of Conveyance
L+55.1
*When L≤405, counterbores for the nuts will not be provided. However, each slot has 4
pre-inserted nuts provided.
6W / B=150
25W / B=150
40W / B=150
15
89
F (Additional Counterbore for Nuts)
Capacitor
Single-phase
Constant Speed Motor Only
QConveying Capacity
* Reference Value
20
R0.5
Detail A
1.1
156.1
55.4
QGearhead Reduction Ratio
*May decrease depending on load condition.
Meandering Prevention Crowned Type
A*
B+76
18 B: Belt Width 58
50.2
40
48 1.1 (Belt Upper Surface)
195
Frame Motor Cover Pulley Holder
Aluminum Aluminum 5052 Aluminum Alloy
MMaterial
Paint
Clear Anodize
SSurface Treatment Clear Anodize
Motor
Frame Cross Section and Enlarged View
Meandering Prevention Crowned Type
(Symmetrical)
Additional counterbored holes are machined on identical locations on both frames.
Carrying Surface Side
6W Motor Type
Configure Online
Motor Position Reversed
Motor Cover with Window
Brackets for Speed Controller Included
Post-Assembly Insertion Nuts Included
Motor with Terminal Box
Stands (Legs)
For details of alterations, see w P.1264.
Can be changed to Motor Cover with Window.
Ordering Code CW
Resin plate can also be purchased as a separate item for
E
maintenance purpose.
WMotor Cover for Conveyor - with Window For details, see D P. 1318. See the Application Chart on the next page for the
E
applicable part numbers.
1 -1264

Download Report