Full details

Temperature
Meas. element: Pt100, class B *
Measuring tip: Operative range -40...+500 °C
Sheath element, stainless steel
8s
T90: *
Handle: *
127 mm
Cable:
1.5 m FEP/silicone
L = 100 mm
Order no. FPA106L0100H
For immersion measurement
Pt100 sensor with handle FPA 123 LxxxxH
Meas. element: Pt100, Class B *
Measuring tip: Operative range -40...+500 °C
Penetrating tip
8s
T90: *
Handle: *
127 mm
Cable:
1.5 m FEP/silicone
For immersion measurement in plastic and pasty substances
L = 100 mm
Order no. FPA123L0100H
Pt100 sensor with handle FPA 124 LxxxxH
Meas. element: Pt100, Class B *
Measuring tip: Operative range -40...+300 °C
Silver rivet, level
10 s
T90: *
Handle: *
127 mm
Cable:
1.5 m FEP/silicone
For surface measurement and immersion measurement
L = 100 mm
Order no. FPA124L0100H
* For general technical data, see page 07.03
DAkkS / DKD or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device) (see chapter Calibration certificates)
07.22
10/2013 • We reserve the right to make technical changes.
Pt100 sensor with handle FPA 106 LxxxxH
Temperature
NTC sensor with handle FNA 106 LxxxxH
Meas. element: NTC *
Measuring tip: Operative range -20...+100 °C
Sheath element, stainless steel
8s
T90: *
Handle: *
127 mm
Cable:
1.5 m PVC
L = 100 mm
Order no. FNA106L0100H
For immersion measurement
NTC sensor with handle FNA 123 LxxxxH
Meas. element: NTC *
Measuring tip: Operative range -20...+100 °C
Penetrating tip
8s
T90: *
Handle: *
127 mm
Cable:
1.5 m PVC
For immersion measurement in plastic and pasty substances
L = 100 mm
Order no. FNA123L0100H
NTC sensor with handle FNA 124 LxxxxH
Meas. element: NTC *
Measuring tip: Operative range -20...+100 °C
Silver rivet, level
10 s
T90: *
Handle: *
127 mm
Cable:
1.5 m PVC
For surface measurement and immersion measurement
L = 100 mm
Order no. FNA124L0100H
10/2013 • We reserve the right to make technical changes.
NTC sensor FNA 305
Meas. element: NTC*
Measuring tip: Operative range -10...+60°C
(non-condensing), Protective tube
in stainless steel
diameter = 3.0mm, length = 50mm
mounted directly on ALMEMO® connector
T90:8 s
For room air measurement
L = 50 mm
Order no. FNA305
(No variants available)
* For general technical data, see page 07.03
DAkkS / DKD or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device) (see chapter Calibration certificates)
07.23
Temperature
Meas. element: Pt100, class B *
Measuring tip: Operative range see below
Copper, level
new Improved thermal transfer thanks to innovative
sensor element and new contact technology
T90: *
Cable:
For surface measurement
20 s
2 meters, insulation see below
Surface sensor
-10...+90°C, Cable PVC Order no. FPA611
-10...+110°C, Cable, PFA for more demanding mechanical
stress ALMEMO® connector, resolution 0.01 K
Order no. FPA611S01
Accessories
Fixture for fastening
with cable ties Best-Nr. ZB9611RM
Pt100 film sensor FPA 686
Meas. element: Pt100, class B*, gewickelt
Messfläche:Operative range -50...+200 °C,
temperature-resistant foil,
15 x 40 mm, approx. 0.5 mm thick
T90*:2 s
Cable:Stranded wire PFA, 4-wire twisted
For surface measurement
Length 2 m
Length 10 m
Order no. FPA686
Order no. FPA686L10
Pt100 ceramic chip sensor element FP 0802
Meas. element: Pt100, Class B *
Measuring tip: Operative range -40...+400 °C
Ceramic chip sensor
Connection wires:
10 mm, bare
Ceramic chip sensorOrder no. FP0802
Unprotected sensor element for constructing your own sensors
* For general technical data, see page 07.03
DAkkS / DKD or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device) (see chapter Calibration certificates)
07.24
10/2013 • We reserve the right to make technical changes.
Pt100 sensor FPA 611 x
Temperature
NTC sensor FNA 611
Meas. element: NTC *
Measuring tip: Operative range -10...+90 °C
Copper, level
20 s
T90: *
Cable:
2 m PVC
Surface sensor Order no. FNA611
For surface measurement
Accessories
Fixture for fastening
with cable ties
Best-Nr. ZB9611RM
NTC sensor FN 0001 K
Unprotected sensor element with cable
Meas. element: NTC*
Measuring tip: Sensor element, unprotected
Operative range: -20...+100°C
Connection wires: appr. 180 mm, fluoropolymer insulation
Connecting cable: 2 meters, PVC, thin stranded pick-up
wire, Operative range -10 to +90 °C
Cable juncture, in shrink-fit
NTC sensor with cable,
free ends
Order no. FN0001K
Option:
ALMEMO® connector including assembly
Single connectors for 1 sensor
Order no. OT9040AS
Double connector for 2 sensors
Order no. OT9040AS2
10/2013 • We reserve the right to make technical changes.
NTC sensor element FN 0001
Meas. element: NTC *
Measuring tip: Operative range -20...+100 °C
Sensor
Connection wires
180 mm, fluoropolymer insulation
Sensor
Order no. FN0001
Unprotected sensor element for constructing your own sensors
* For general technical data, see page 07.03
DAkkS / DKD or factory calibration KT90xx temperature for sensor or measuring chain (sensor + device) (see chapter Calibration certificates)
07.25

Download Report