Shearwall Anchor Bolt Installation Just Got Easier Introducing new pre-assembled anchor bolts and reusable anchor-bolt templates for the Strong-Wall® SB shearwall, both designed to make shearwall installation easier and more consistent. By using pre-assembled anchor bolts, installers no longer have to take valuable time assembling components, and inspectors can look at the head stamp to quickly identify length and material grade. To meet specific project demands, the SWSB-AB anchor bolts are offered in 7/8" and 1" diameters and in standard and high-strength steel. In tall stemwall applications where full embedment of an anchor bolt into the footing is required, Simpson Strong-Tie offers the SWSB-HSR anchor extension kit that includes ASTM A449 highstrength rod with a heavy hex nut fixed in place and a high-strength coupler nut. The new reusable SWSB anchor-bolt templates help accurately locate the SWSB-AB anchor bolts on the forms prior to the concrete pour to speed up installation and reduce placement mistakes. They also enable greater concrete flow when compared to traditional leave-in templates, reducing the chance of voids in the concrete, which can lessen its bearing capacity. Features: •• Removes much of the guesswork around Strong-Wall SB anchorage, ensuring a better installation •• Pre-assembled anchor bolts comply with ICC-ES ESR-2652 •• Head stamp includes bolt length, bolt diameter, and “HS” for High Strength (when specified) for easier installation and inspection •• Reusable templates save money and reduce concrete void issues •• Anchor templates available for interior/exterior, brick ledge and panel-form applications Top of concrete SWSB-RTPF (Panel Form) SWSB-RT (Exterior Installation) SWSB-RTBL (Brick Ledge) SWSB-RT (Interior Installation) F-L-SBABRT14 © 2014 SIMPSON STRONG-TIE COMPANY INC. Strong-Wall® SB Shearwall Anchor Bolt Installation Just Got Easier SWSB-AB Anchor Bolts 24 in. Model Dia. (in.) Total Length (in.) le (in.) SWSB-AB7/8x24 7/8 24 20 SWSB-AB7/8x24HS 7/8 24 20 SWSB-AB7/8x30 7/8 30 26 SWSB-AB7/8x30HS 7/8 30 26 SWSB-AB7/8x36HS 7/8 36 32 SWSB-AB1x24 1 24 20 SWSB-AB1x24HS 1 24 20 SWSB-AB1x30 1 30 26 SWSB-AB1x30HS 1 30 26 SWSB-AB1x36HS 1 36 32 Top of Concrete Heavy Hex Nut Plate Washer Heavy Hex Nut SWSB-AB 7/8 x 24HS (Others Similiar) SWSB-HSR Extension Kit Model No. Dia. (in.) Total Length (in.) le (in.) 12 in. and 18 in. Models SWSB-HSR7/8x2KT 7/8 24 22 SWSB-HSR7/8x3KT 7/8 36 34 24 in. Model SWSB-HSR1x2KT 1 24 22 SWSB-HSR1x3KT 1 36 34 HX on Extension Kit le ⅞" or 1" high-strength rod Highstrength coupler nut Strong-Wall SB Template Model ® SWSB12 2⅛" HX Heavy Hex Nut fixed in place SWSB-RT Reusable Templates Width (in.) ⅞ Top of concrete 1.All models are high-strength ASTM A449. 2.Total anchor embedment = SWSB-HSR le + SWSB-AB le + 21/8". Strong-Wall® SB Model Heavy Hex Nut fixed in place on all SWSB-AB anchor bolts le 1.Standard-strength anchor bolts are ASTM F1554 Grade 36, high-strength (HS) anchor bolts are ASTM A449. 2.High-strength anchor bolts are required for seismic applications and where the tension force at wind design shear exceeds the allowable load for standard-strength anchor bolts. 3.An additional nut for template installation is provided with each SWSB-AB. Strong-Wall® SB Width (in.) ⅞" 2⅛" Length 12 in. and 18 in. Models Model No. Length Strong-Wall® SB Width (in.) Reversible1 Panel Form Brick Ledge 12 1/8 SWSB-RT12 SWSB-RTPF12 SWSB-RTBL12 SWSB18 18 SWSB-RT18 SWSB-RTPF18 SWSB-RTBL18 SWSB24 24 SWSB-RT24 SWSB-RTPF24 SWSB-RTBL24 SWSB-HSR Extension Kit 1.SWSB-RT templates are reversible. Use the same template for interior or exterior applications. 2.Templates are recommended and required in some jurisdictions. 3.Foundation design by Designer SWSB Shear Anchorage Seismic3 Model L t or L h (in.)6 SWSB12 Wind4 Shear Reinforcement Minimum Curb/Stemwall Width (in.) Shear Reinforcement Minimum Curb/Stemwall Width (in.) 10¼ (1) #3 Tie 6 See Note 5 6 SWSB18 15 (1) #3 Hairpin 6 (1) #3 Hairpin 6 SWSB24 19 (1) #3 Hairpin 6 (1) #3 Hairpin 6 ASD Allowable Shear Load V (lbs.)5 Uncracked Cracked 1035 740 Hairpin reinforcement achieves maximum allowable shear load of the Strong-Wall® SB panel. 1.Shear anchorage designs conform to ACI 318-11 and assume minimum 2,500 psi concrete. 2.Tie or hairpin reinforcement (by others) is not required for interior foundation applications (panel installed away from edge of concrete), or braced wall panel applications. 3.Seismic indicates Seismic Design Category C through F. Detached 1 and 2 family dwellings in SDC C may use wind anchorage solutions. 4.Wind includes Seismic Design Category A and B and detached 1 and 2 family dwellings in SDC C. 5.Use (1) #3 tie for SWSB12 when wall design shear force exceeds tabulated anchorage allowable shear load. 6. For Lt and Lh definitions, see C-L-SWSB. 7. For shear anchorage solutions when using the leave-in template, see C-L-SWSB. This flier is effective until December 31, 2016, and reflects information available as of May 1, 2014. This information is updated periodically and should not be relied upon after December 31, 2016; contact Simpson Strong-Tie for current information and limited warranty or see www.strongtie.com. © 2014 Simpson Strong-Tie Company Inc. • P.O. Box 10789, Pleasanton, CA 94588 F-L-SBABRT14 5/14 exp. 12/16 800-999-5099 www.strongtie.com