Parts/price list

Product & Price List
Effective from: May 1st 2014
Web: www.17d-miniatures.co.uk
Works Address
Unit 13 Via Gellia Mills, Bonsall, Matlock, Derbyshire DE4 2AJ
(Visitors welcome, by appointment please)
Tel: 01629 825070 or 07780 956423
Email:
Technical queries: [email protected]
General enquiries: [email protected]
NB: Prices are subject to change without notice particularly where steel is the predominant
raw material, due to frequent cost fluctuations. Always check price with us before ordering.
Page 2
Class 20 Ready to Run Diesel Locomotive - in 5" Gauge
This locomotive features predominantly all steel construction, with cast
polyeurethane detail castings. (No flimsy GRP moulded body shells here!)
•
•
•
•
•
•
•
•
•
•
Supplied Ready to Run (batteries are the only extra needed and we can
supply these too if required)
Out of the box onto the track!
Laser cut and welded chassis
Laser cut and fabricated steel body panels with rivet detail, grills and
vents etc all fitted as separate parts.
Radio Controlled, 2 x 150 watt motor version for realistic shunting
operations without an "overscale" driver.
Or, Powerful, 4 x 150 watt motor, standard control version for
passenger hauling etc.
LED directional head-code lamps.
Tried and tested Parkside motors & Mtronics controllers for reliability.
Choice of alternative liveries possible as a cost option.
High quality, authentic Class 20 sounds system with 2 x 50 watt
speakers, available as an upgrade - please ask for details.
Price: 5” gauge - Ready to run* - with standard options: £2995
(* batteries not included!)
-------------------------------------------------
Now also available in 7 1/4” gauge – from £4250 RTR
Sound System and Super Detail options available
Page 3
Ready to Run Wagons
Key Features: (Additional features for certain models
●
●
●
●
●
●
●
●
●
●
– see website for more detail )
TIG welded body and chassis assemblies
Profile channel section for chassis
Rivet detail
Sprung suspension
Sprung buffers
Sprung draw hooks
Laser cut under-frame gear, brake & spring detail
Detailed axle box castings & LWC brass buffer stocks
Choice of paint finishes where appropriate
Choice of wagon numbers (and “return to” names where appropriate) allowing you
to build up rakes of wagons
Current Model Range:
Note: The following wagons are all fully built, painted and ready to run, unless otherwise stated.
Product
5” Gauge
7 1/4” Gauge
BR 27t Iron Ore Tippler based, with twin disc brakes,
uprated chassis and suspension, seat & clevis couplers
N/A
£ 749.00
BR Standard Box Van
£ 615.00
£ 699.00
16t Mineral Wagon (with opening end door)
N/A
£ 599.00
GWR Shunter's Truck
£ 595.00
£ 649.00
Gunpowder Van
£ 615.00
£ 699.00
Five Plank Wagon *
£ 499.00
£ 585.00
7¼“ gauge Driving Truck
Seven Plank Wagon *
£ 539.00
(*Plank wagons are supplied as RTR Chassis with body in kit form)
£ 625.00
BR Conflat-A Container Flat Wagon
£ 599.00
£ 520.00
Page 4
BR Coil J
£ 470.00
£ 549.00
BR 13t Sand Wagon
£ 470.00
£ 549.00
BR 27t Iron Ore Tippler
£ 470.00
£ 549.00
GWR Loriot M Low Machine
£ 480.00
£ 559.00
Product
5” Gauge
7 1/4” Gauge
LNER/BR 20 ton Brake Van
£ P.O.A
£ 799.00
LMS 20 ton Brake Van
£ P.O.A
£ P.O.A
GWR Toad Brake Van
£ P.O.A
£ P.O.A
5” Gauge
7 1/4” Gauge
Scale W Irons: Set 4
N/A
7LC040
£ 32.50
Scale V Hangers: Set 2
N/A
7LC041
£ 08.49
Standard W irons 3mm mild steel: Set of 4
5LC001 £ 19.15
7LC001
£ 25.90
Leaf springs (fake) 3mm mild steel: Set of 4
5LC002 £ 11.25
7LC002
£ 17.95
V hangers 3mm mild steel: Set of 2
5LC003 £ 04.95
7LC003
£ 05.60
Draw hook mounting pads: Set of 2
5LC004 £ 02.20
7LC004
£ 02.35
Draw hooks: Set of 2
5LC005 £ 04.35
7LC005
£ 05.49
Brake levers 3mm mild steel: Set of 2
5LC006 £ 04.15
7LC006
£ 04.59
Chassis kit - 9 foot wheelbase, laser cut chassis kit
including W irons, V hangers, brake frets, chassis spacer,
dummy leaf springs, draw hooks and pads.
Note: Now also includes chassis channel
5LC007 £ 95.50
7LC007 £144.10
Chassis kit - 10 foot wheelbase version, as above.
5LC008 £ 99.40
7LC008 £149.50
WAGON CHASSIS PARTS & MATERIALS
Product
Laser cut steel profiles:
(The main chassis parts are designed for welding together but could be silver soldered together and
then attached to the channel; please refer to pictures on website)
Loriot M Chassis Kit – designed to be tig-welded, could be silver soldered
5LC009 £173.50
7LC009 £225.00
Complete set of laser cut strapping for 5 Plank Wagon
5LC011 £ 49.00
7LC011 £ 57.50
9” x 3½” steel channel length, suits up to 17'6" chassis, ea:
(3 lengths needed for standard 9ft wagon)
5RM013 £ 04.25
7RM007 £ 04.70
12" x 3½" steel channel - 3ft length, for brake vans etc
5RM014 £ 06.29
7RM008 £ 06.45
Vacuum Cylinder, cast resin (dummy)
5RM015 £ 09.50
7RM009 £ 11.50
Channel Section, etc:
Page 5
Featured Products
NEW PRODUCT – 7 1/4” gauge Diesel Loco Buffer Beam Super Detailing Ki t
Consisting of:
Air brake valves, pipes & connectors
Air Control valves & pipes
Blue star electrical jumpers
Lost wax cast in brass and threaded or tapped with nuts/screws as required - simply drill
your buffer beam to suit. Rubber hoses included.
Complete Kit:
7RM350 £ 69.00
Airbrake valve/pipe only - each:
7RM351 £ 12.00
(Also available: Turton and Platt type Locomotive buffers with step and plate detail kit see
buffers section of this list)
5" gauge "SE 500" bogies
Sturdy 8mm laser cut frames, roller bearings, wheels in EN8
Supplied complete with nylon bearing/riser block
(not shown in photo above).
Per pair £249 (ie 8 wheels 4 axles total!)
- - - || - - ** Now also available with disc brake option **
Can be supplied with either 1 caliper fitted to each bogie, or 2 calipers on one bogie with
the other bogie unbraked, depending on your needs. Assembled to order.
Price: £ 389 (2 bogies / 2 calipers)
Page 6
LMS / BR Locomotive Buffer Assembly (Round head type)
Turton & Platt type, internally sprung, 1 piece CNC turned stocks, CNC turned heads.
Suitable for a large range of steam and diesel engines.
Set of Four, boxed.
7¼“ gauge: Part No. 7RM006 Price £95.00
5” gauge:
Part No. 5RM025 Price £72.50
Detailing Kit for Turton & Platt buffers (7 1/4” g only):
Lost wax cast brass step & laser cut plate kit, 4 of each:
7RM006D £ 20.00
Assembled Wagon Chassis
Product
5” Gauge
£145.00
7 1/4” Gauge
Chassis - fully assembled - 9ft wheelbase
(but without machined parts or castings).
5RM011
Chassis - fully assembled - 10ft wheelbase
(but without machined parts or castings).
5RM011/1 £151.00
7RM004/1 £191.00
Complete Ready to Run chassis - 9’ wheel base,
including wheels, buffers, dummy brake gear etc.
5RM012
7RM005
Complete Ready to Run chassis - 10’ wheel base,
including wheels, buffers, dummy brake gear etc.
5RM012/1 £295.00
£289.00
7RM004
£185.90
£399.00
7RM005/1 £405.00
Note: 5” gauge chassis supplied with Slater's wheels as standard - other types on request.
7.25” gauge supplied with turned 3 hole disc wheels as standard - other types on request.
WHEELS, BOGIES, Etc
Product
5” Gauge
7 1/4” Gauge
Bogies
“SE500” bogies, Sturdy 8mm laser cut frames,
sprung, EN8 wheels on ball races. Per pair:
Braked Bogies
As above but with disc brakes (2 calipers)
Mechanical Brake Caliper
5RM300 £249.00
N/A
5RM300/B £389.00
N/A
MISC012 £ 47.00 each
for disc brake applications. Machined aluminium caliper blocks sliding on steel pins, and
supplied with a mounting bracket ready to fit to your own chassis. As used in our own driving
truck and SE500 Bogies.. Suits both 5” gauge and 7 1/4” gauge applications, subject to space.
Page 7
Wagon Wheels / Axles
Product
5” Gauge
7 1/4” Gauge
Plain disc wheels, each
5RM310 £ 09.45
7RM310
£ 15.20
7RM001
£105.00
Standard 3 hole disc wheel sets (4 wheels/2 axles)
3 hole disc wheel sets with contoured dish profile
N/A
7RM101
£157.00
8 Spoke, cast iron wagon wheel castings - each
5RM101 £ 69.00
N/A
7RM200
£ 23.95
8 Spoke, cast iron wagon wheels, machined – each
N/A
7RM200M £ POA
Slaters Wheel/Axle sets – 5 inch gauge only
Correct scale, 3ft 1in diameter with true scale tyre/flange profile. Precision turned steel tyres with a
detailed centre insert moulded in engineering grade glass-filled nylon. (Suitable for 8mm i/d bearings)
3 Hole Disc wheels on axles ( 4 wheels 2 axles)
5RM001 £ 51.89
N/A
Split Spoke wheels on axles ( 4 wheels 2 axles)
5RM002 £ 51.89
N/A
Straight Spoke wheels on axles ( 4 wheels 2 axles)
5RM003 £ 51.89
N/A
As above, but with reduced tread diameter to give GL5 flange profile:
Straight Spoke wheels on axles, GL5 flange profile
5RM201 £ 57.75
N/A
3 Hole Disc wheels on axles, GL5 flange profile
5RM202 £ 57.75
N/A
Split Spoke wheels on axles, GL5 flange profile
5RM203 £ 57.75
N/A
Diesel Locomotive / Coach Wheels
3'7” Diesel Locomotive Wheel (flat dish profile) Each:
5RM315 £ 13.20
7RM315 £19.25
3'9" Diesel Locomotive Wheel (flat dish profile) Each:
5RM320 £ 13.90
7RM320 £19.95
3'7” Coach Wheels (flat dish profile) Each:
5RM325 £ 12.00
7RM325 £19.25
Buffers:
Wagon Buffers
Product
5” Gauge
7 1/4” Gauge
Set of 4 RCH Buffer Stocks, lost wax cast in brass:
5RM005 £ 39.95
N/A
Complete RCH sprung buffer kit
5RM010 £69.00
N/A
Includes: 4 x 13” buffer heads and shanks, lost wax cast brass buffer stocks; springs; retaining pins.
Set 4 standard CNC turned sprung wagon buffers
N/A
7RM002 £ 55.50
Set 4 Oleo type, machined buffers, internally sprung.
5RM006 £ 49.00
7RM003 £ 65.00
GW style, tapered stock, sprung buffer sets
N/A
7RM204
£ P.O.A
N/A
7RM205 £ P.O.A
To fit Dia AA7 Toad brake, and will suit several other models.
Set of 4 LMS 20t Brake Van type sprung buffers (4)
Set 4 early type, tapered round stock, wagon buffers
5RM020 £ 59.00
7RM206 £ 74.90
Page 8
Locomotive Buffers
Product
5” Gauge
Set of 4 LMS/BR round head locomotive buffers
5RM025 £ 72.50
7RM006
Set of 4 LMS/BR oval head locomotive buffers*
5RM025A P.O.A
7RM006A £195.00
Mixed Set 2 x Round; 2 Oval Head LMS BR loco buffers*
5RM025B P.O.A
7RM006B £162.50
Detailing Kit:
N/A
Lost wax cast brass step / laser cut plate detailing kit for above: (4 of each)
7 1/4” Gauge
£ 95.00
7RM006D £ 20.00
*Note: The Oval head set and the Mixed set are supplied with slot & pin buffer head retainers, under
the stocks, to facilitate fitting where no clearance can be allowed behind buffer beam.
Set of 4 Oleo type Locomotive buffers
5RM026 £ 69.00
7RM011 £ 95.00
Miscellaneous: Springs, Bushes, Chain
Coil Springs:
We currently use the following springs in our own range. Although they may be suitable for
other purposes they are listed here under the usage to which we put them:
MAT015
7 ¼”Axle box coil springs (ea)
£ 01.94
Carbon Steel - O/D 14.3mm - Free length 50.8mm – Spring rate 16.85 N/mm
MAT016
5” Axle box coil spring OR: 7¼” Buffer & draw hook springs (ea)
£ 01.22
Carbon Steel – O/D 12.7mm – Free Length 31.8mm – Spring rate 7.97 N/mm
MAT018
5” Buffer & draw hook springs (ea)
£ 01.09
Carbon Steel – O/D10.5mm – Free Length 25.4mm – Spring rate 2.29 N/mm
Oilite maintenance free bearings:
MAT021
8mm id. x 12mm o/d x 12mm flanged - each
£ 01.85
Coupling chain
MAT052
MAT053
Link chain, black japanned, 3mm x 21mm cut to your requirements – per mtr:
£ 03.39
Link chain, black japanned, 4mm x 26mm cut to your requirements – per mtr:
£ 06.20
Note: Prices are subject to change due to raw materials cost fluctuations,
so please check when ordering.
E & O. E.
Page 9
Carriage: Post & Packing / Carriage is charged at cost.
Payment Options:
PayPal, Credit / Debit Card, Bank Transfer (ask for details)
Cash on Collection, or cleared personal cheque, payable to “What Next”
Terms: Payment in full is required before shipping / collection.
When ordering wagons, custom items, or other items totalling more than £150 where a lead time is
involved, a minimum deposit of 25% is required with order. An approximate completion date will be
given. Balance payable on completion / before shipping. Balance must be paid within 14 days of
notification that order is complete, whether or not the order is to be shipped or collected immediately.
We reserve the right to make a charge for storage if we have to hold finished orders for more than 2
weeks, due to limited storage space.
17D Miniatures
5” gauge ready-to-run chassis
17D Miniatures is owned and operated by R, L & T Dengate
trading as “What Next”
Office and accounts address:
236 Bakewell Road, Matlock, Derbyshire, DE4 3BA
Safety Note
Our products are not toys and are thus not suitable for use by children under 14 without close adult
supervision. Owing to the nature of construction, there may be sharp edges.

Download Report