Advances in Applied Materials and Electronics - Beck-Shop

Advances in Applied Materials and Electronics Engineering III
Selected, peer reviewed papers from the 2014 3rd International Conference on Applied Materials and Electronics
Engineering (AMEE 2014), April 26-27, 2014, Hong Kong, China
von
Brendan Gan, Y. Gan, Y. Yu
1. Auflage
Trans Tech Publications 2014
Verlag C.H. Beck im Internet:
www.beck.de
ISBN 978 3 03835 058 3
schnell und portofrei erhältlich bei beck-shop.de DIE FACHBUCHHANDLUNG
Table of Contents
Preface, Committees and Sponsors
Chapter 1: Nanoscience and Nanotechnology
Synthesis and Characterization of Antimony-Doped Zinc Oxide Nanostructures via
Microwave-Assisted Process
W. Jaisamritpon and P. Inchidjuy
Preparation of Light Guide Plates with Micro-Patterned Functional Resin Layers by Using
UV Nano-Imprint Process
S.Y. Park, M.H. Sung, H.B. Lee, S.E. Lee and H.C. Lee
Enhanced Cr(VI) Removal from Landfill Leachates Using Nanoscale Zero-Valent Iron
T.Y. Liu, Z.L. Wang and X.X. Yan
Fabrication of Aligned PAN Nanofiber by Electrospinning with Parallel Electrode
H.Y. Liu, L. Xu, X.P. Tang and N. Si
Nanoparticles-Induced Phase Transitions in A(BC)3 Miktoarm Star Copolymers
L. Zhou
Preparation of Folate-Decorated Hydroxycamptothecin Nanoparticle Lyophilized Powder
and its Antitumor Activity on Mice Bearing S180
Z.H. Xing
The Influence of Oblique Deposited Angle on Metal Enhanced Fluorescence Property of Ag
and Ag/ZnO Core-Shell Structure
Y.L. Ding, Y. Zhao and L.J. Wang
A Study of Nanomaterial Applications in Architectural Coating for Energy Saving
J.I. Kuo and H.M. Jeng
Morphology and Mechanical Property of Epoxy-Clay Nanocomposites Prepared by
Ultrasonication
M. Al-Qadhi and N. Merah
The Effect of Nanostructuring on Physical and Mechanical Properties of Metallic Materials
R. Apakashev and N. Valiev
In Vitro Evaluation of Candida albicans Biofilm Formation on Denture Base PMMA Resin
Incorporated with Silver Nanoparticles and its Effect on Flexural Strength
S. Bajracharya, S. Thaweboon, B. Thaweboon, A. Wonglamsam and T. Srithavaj
In Situ Growth of Mesoporous NiO Nanoplates on Graphene Matrix as Anode Material for
Lithium-Ion Batteries
D.F. Qiu, Y.J. Xia, H.Q. Ma and G. Bu
Preparation of Graphene/Fe3O4/Polypyrrole Nanocomposite and its Adsorption for Cr(VI)
Ions
W. Yao and Y. Lu
Nanomaterials Ontology Model
I.L. Artemieva and N.V. Ryabchenko
3
8
12
19
23
28
32
37
41
47
51
56
61
65
Chapter 2: Materials Science and Processing
Microwave Irradiation of Candidal Adhesion and Biofilm on Polymethylmethacrylate Resin
R. Goveas, T. Srithavaj, A. Wonglamsam, B. Thaweboon and S. Thaweboon
A Study on the Optical and Electrical Properties of GZO/Pt/GZO Multilayered
Transparent Electrodes for Photonic Applications
M.K. Jeong and H.C. Lee
Effects of UV Irradiation on the Molecular Structure and Tensile Properties of Nucleated
Polypropylene
Y.J. Tao, G.X. Jie, X.D. Zhang, L.F. Hu, J. Peng, J. Wang and H. Feng
In Situ Observations of Stresses in Al Interconnect Line by Synchrotron Radiation under
Thermal/Electrical Conditions
H.K. Fu, D.B. Lu and Z.G. Li
73
78
82
88
Mesozoic Tectonomagmatic Evolution and Gold Metallogeny in Jiaodong Area, East China
X.F. Yu, D.P. Li, H.K. Li, S.X. Wang and W. Shan
Neural Network Model for Predicting Anticancer Activity of Pyridopyrimidines Derivatives
X.H. Du and W.C. Zhuang
Preparation and Structure of BiVO4-Graphene Composites
B. Zhang, Y.L. Wang, L.H. Huang and S.Z. Tan
Shear Horizontal Waves in Orthotropic Layer/Piezoelectric Cylinder Structures
X. Zhao and H.J. Wang
Solidification Behavior of Lined Al2O3-ZrO2 Multiphase Ceramics in SHS Composite Pipes
G.B. Yu, F.H. Tao, S.H. Wang, L.J. Cao and Q. Ma
Surfacial Modification of Magnesium-Lithium Alloy
H.J. Luo, Y.H. Liu, B.N. Song and G.C. Yao
Synthesis of an In Situ Aluminum Matrix Composite Fabricated by Al-Cr2O3 System
H.G. Zhu, H. Sun, B. Hua, G.H. Guo, J.W. Huang and J.L. Li
The High Temperature Oxidation Behavior of Hot-Dipping Al Coating on 0Cr18Ni10Ti
Stainless Steel
J. Lou, J.K. Wang and Y.B. Wang
The Influence of Chemical Compounds on the Sulfur K-Edge X-Ray Absorption near Edge
Spectrum of the Vulcanized Rubber
K. Boonkerd and W. Limphirat
Research of Fluxless Soldering of High-Purity Aluminium with Solders Type Zn-Al
R. Koleňák, I. Kostolný and R. Čička
Differences of Fire Resistance According to Boundary Conditions of Submarine Structural
Steels
I.K. Kwon
A Hydrogen Embrittlement Mechanism for Sensitized Types 304, 316 and 310 Austenitic
Stainless Steels
O.M. Alyousif and R. Nishimura
Modification of Mg Alloy Surfaces Based on Micro-Arc Oxidation Methods
H. Tao, S.K. Ho, E. Li, X.Z. Zhang and G. Lai
Plasmids Role in Survival of Acinetobacter calcoaceticus A1 Exposed to UV-Radiation and
Hydrocarbons
A. Bekturova, Z. Markhametova and Z. Masalimov
Effect of Electrical Potential on DPPC Liposome Lubrication for Artificial Joint
H.Y. Zhou, S. Wei, X.H. Wei and C.T. Wang
Characterization of Thermoplastic Elastomers for Design Efforts
Z. Major, M.C. Miron and U.D. Cakmak
Electro and Surface Properties of Graphene-Modified Stainless Steel for PEMFC Bipolar
Plates
Y.J. Kim, D.H. Kim, J.S. Kim, J.H. Jang, U.C. Jung and D.G. Nam
Determination of Parameters for Accurate Dimension in Wire Electrical Discharge
Machining
A. Muttamara and P. Janmanee
A Comparative Study on the Viscoelastic Models for Rubbery Materials
Z.M. Xie, J. Zhang and Y.S. Wang
Preparation of New Azo Benzene Polyurethane and its Thermo-Optical Properties
P. Wang, F.Y. Ye, G.R. Cao, Z.L. Wang, F.X. Qiu and L. Zhuang
92
96
101
105
109
113
119
123
128
132
137
141
146
151
156
161
167
171
176
181
Chapter 3: Building and Construction: Materials, Planning and Design
A Study on the Construction Waste Forecasting Method Considering Material Loss Rate in
South Korea
R.H. Kim and S.H. Tae
Application of Thermally Treated Sewage Sludge in Blended Cements
Z. Pavlík, M. Pavlíková, J. Fořt, M. Záleská, I. Medved´, R. Černý and P.G. Koutsoukos
Compressive Strength Development of High-Strength Concrete under Different Curing
Temperatures
K.H. Yang, J.S. Mun and J.E. Jeong
187
191
195
b
Advances in Applied Materials and Electronics Engineering III
Environment-Friendly Assessment of Passive Apartment House Based on Major Building
Materials in Korea
Y.R. Gong, S.H. Tae, S.W. Song and S.J. Roh
Experiment Method on the Heat Transfer Coefficient in Air Convection of Young Concrete
S.T. Yi, J.S. Mun and M.K. Kwak
Relationship between Pore Size Distribution and Mechanical Properties of Porous
Sedimentary Rocks
M. Keppert, M. Čáchová, K. Ďurana, J. Fořt, D. Koňáková, Z. Pavlík, A. Trník and R. Černý
Reuse of Waste Ceramic Powder with a High Content of Amorphous Phases as Partial
Replacement of Portland Cement
Z. Pavlík, M. Pavlíková, J. Fořt, T. Kulovaná and R. Černý
Shrinkage Model for Heavyweight Concrete Using Magnetite Particles
K.H. Yang, J.H. Mun and J.K. Song
Thermal Behaviour of Hardwood and Softwood Composites
K.K. Wong, N. Gamage, S. Setunge and M. Pannirselvam
Use of Materials in Green and Sustainable Buildings in Mauritius
B.Y.R. Surnam
The Study on Mechanical Properties of the Graded Broken Stone Mixed with Cement and
Fine Powder
J.L. Tian, Y.K. Yang, Y.P. Hu and J.Q. Cheng
The Study on Workability and Mechanical Properties of High Volume Fly Ash Underwater
Concrete
X. Zhang, Q.L. Liu and Y.Q. Hu
Embedded Electronics Influence on the Strength of Carbon Fiber Laminate
H. Herranen, J. Kers, J.S. Preden, R. Talalaev, M. Eerme, J. Majak, H. Lend and G. Allikas
Fatigue Performance of Semiconductor Strain Gauges in GFRP Laminate
H. Herranen, T. Saar, R. Gordon, M. Pohlak and H. Lend
A Study on Heat Transfer Analysis and Experiment of Reinforced Concrete Columns Using
500°C Isotherm Method
I.H. Yeo, K.J. Hwang, J.H. An and J.H. Lee
Comparison of Seismic Behaviour for a Single Unit Tunnel Form RC Building before and
after Repaired
S.A. Anuar, N.H.A. Hamid and M.H. Hashim
Dynamic Properties of Silicate-Grouted Sand at Low Stress Level
J.R. Kim, D. Bakhtiyarov, G. Zhumabekov and D. Saliyev
Estimation of Optimal Water Flow Rate of a Steel Roller Shutter with Water Film Cooling
System
S.K. Lee, W.H. Lo, M.C. Ho and T.H. Lin
Fire Resistance Evaluation of Reinforced Concrete Columns Using Axial Load Ratio and
Slenderness Ratio
I.H. Yeo, B.Y. Cho, J.H. An and B.Y. Min
Investigation on the Effects of Ground Media on the Behaviour of Buried Pipes due to Blast
Loads by Simulation
A.J. Olarewaju
On the Automobile Passenger Station Planning Design
Q.J. Zhang, S. Liu and H.Y. Wang
Reduced Stiffness Criteria for the Safe Buckling Design of Thin Shells and its Numerical
Validation
H.T. Wang
A Review on the Effects of Various Supplementary Cementitious Materials on Physical
Properties of Hardened Concrete
S. Barbhuiya and H. Nikraz
Research on the Shrinkage Performance of Cement-Stabilized Base
Y. Wang and X. Sun
Stochastic Perturbation Analysis of Deteriorated Structures
D.L. Allaix, V.I. Carbone and G. Mancini
Strength Recovery of Lightweight Concrete under Elevated Temperature
S. Barbhuiya, T. Lo, S. Memon and H. Nikraz
199
203
207
212
216
220
226
230
235
239
244
249
254
259
263
268
273
277
283
287
292
296
300
Advanced Materials Research Vol. 905
Contribution from the Use of Alternative Materials in Concrete for Accessibility on
Sidewalks
V.R.F. Santos, F.M. Silva, L.C.L.J. Ribeiro, M.S.G. Pires, R.C.C. Lintz and L.A. Gachet-Barbosa
Novel Honeycomb-Microstructured Asphalt Composite Coatings for Sustainable
Photocatalytic Application
J.L. Gong, B.G. Xu, H.Y. Yu and X.M. Tao
Predicting Hardness of Four Groundwater Monitoring Stations in Kaohsiung City of
Taiwan Using Seven Types of GM (1, 1) Model
T.Y. Pai, R.S. Wu, C.H. Chen, L. Chen, C.Y. Lin, H.Y. Lee, L.H. Shih, Y.Z. Jiang and C.Y. Shen
The Carbon Absorb of Cement-Based Material in the Accelerated Carbonation Test
X.X. Zha, H.Y. Wang and G.L. Feng
c
306
310
314
318
Chapter 4: Environmental Research
Assembly of a Wetland on a Laboratory Scale for Post-Treatment of Domestic Wastewater
J.R. Mourão, R. Freitas, G. Dragoni Sobrinho, L.C.L.J. Ribeiro, R.C.C. Lintz, L.A. GachetBarbosa and M.S.G. Pires
Assessing the Land Use Change and Ecological Security Based on RS and GIS: A Case
Study of Pingdingshan City, China
D. Lu, H.L. Yu and G.M. Yu
Environment Management for Sustainability of Hallasan National Park in Jeju Island,
Korea
K.H. Byun, E.J. Kang and K.H. Kim
Effect of Kenaf Water Retting Process by Bacillus cereus on the pH of Retting Water
M.N. Othman, R.M. Tajuddin and Z. Ahmad
Long-Term Equilibrium and Short-Term Dynamics between Metropolitan Housing
Markets in China
G.L. Zou and K.W. Chau
Physical Model of Estuarine Salinity Intrusion into Rivers: A Review
N.F. Haron and W. Tahir
Proposal of a Simplified Environmental Assessment Method Based on Major Building
Materials for School Buildings in Korea
S.J. Roh and S.H. Tae
Assessing the Carrying Capacity of Water Resources in Wuhan City, China
H.H. Jia and G.M. Yu
Evaluation of Contributing Factors on Strength Development of Lime Stabilized Artificial
Organic Soils Using Statistical Design of Experiment Approach
F.N.L. Ling, K.A. Kassim, A.T.A. Karim and S.C. Ho
The Estimation of Discharge in an Experimental Open Channel
C.T. Ho, Y.H. Cheol, Y.G. Seon, N.H. Suk and B.C. Yeon
The Meteorological Impact to the Air Temperature on a Sub-Tropical City
C.H. Huang and J.C. Aganda
Research on Environmental Features Description and Extraction Based on Cylindrical LogPolar Coordinate
K.F. Su and T.Q. Chang
A Study on Environmental Load Assessment of Early Strength Activator Blast Furnace
Slag
Y.J. Bok, S.H. Tae, T.H. Kim and J.H. Park
Assessment on Physical Properties and Environmental Load Emission of Concrete Using
Early Strength Activator Blast Furnace Slag
T.H. Kim, S.H. Tae, J.H. Kim and K.H. Yang
325
329
334
339
343
348
353
357
362
369
374
379
383
388
Chapter 5: Power and Electronic Engineering
An Application of LCL Filter for an Isolated Wind Turbine System
N.T. Quach, J.H. Ko and E.H. Kim
Design of Fuzzy Logic Controller for DSTATCOM
P. Rajakumar and R. Saravanakumar
395
401
d
Advances in Applied Materials and Electronics Engineering III
Digital Stable IIR Band Pass Filter Design Using Seeker Optimization Technique
S.K. Saha, R. Kar, D. Mandal and S.P. Ghoshal
Micro-Grid Stability in Gapa Island Using Reactive Power Control of STATCOM (Case
Study)
D.H. Lee, D.W. Kim and E.H. Kim
Determination of Reserve Capacity for Power System with Wind Generation
W.W. Yang, P.F. Li, Y.Y. Zhang, J.L. Wang, J.L. Zhang and L.X. Sun
Modeling and Simulation of Modular Multilevel Converter Based-HVDC Connecting to
Offshore Wind Farms
S.H. Kim, W.C. Jeong and E.H. Kim
2-D Simulation of Cathode-Directed Streamer in SF6/N2 Gas Mixtures
M. Li, R.Q. Wang, J.P. Zhang, D. Wang and D. Cao
A Reconfigurable Monopole Antenna with Fluorescent Tubes by Using Plasma Windowing
Concepts at 4.9GHz
H. Ja’afar, M.T. Ali, A.N. Dagang, H.M. Zali and N.A. Halili
406
411
416
421
427
432
Chapter 6: Control Systems and Engineering
Synthesis of Control System for an Unstable Object by Real Interpolation Method
A.V. Voronin, V.I. Goncharov and T.A. Shchelkanova
Unmanned Ground Vehicle SysML Navigation Model Conducted by Energy Efficiency
E. Väljaots and R. Sell
Wireless Eddy Current Probe Prototype and Monitor Design and Aircraft Maintenance
Applications
E. Gode, M.C. Kushan and S.C. Uzgur
The Belt Conveyor Control of Large Dip Angle by FMBTES
Y.B. Hou, M.Q. Zheng, X.Z. Wang and Y.L. Xue
An ADRC Controller Design for Servo System Based on ASFA
J.M. Wu, M.G. Wang and Y. Hu
Hyperchaos in the Fractional-Order Lü System and its Synchronization
T.Z. Li and Y. Wang
Research on the Coordination Control between STATCOM and VQC in Substation Based
on the Identification of System State
J.H. Li and J.X. Zou
Research on Serial Communication in the Permanent Magnet Linear Synchronous Motor
Vertical Transportation System
X.H. Feng and C.L. Wang
A Semi-Fuzzy Logic Signal Optimization Model of an Isolated Oversaturated Intersection
J.Z. Gao, J.F. Yuan and Z.Y. Zou
Influence of the Rotor Architecture and of the Speed on the Volumetric Efficiency of a New
Type of Rotating Volumetric Machine
M. Hawas, N. Băran and A. Detzortzis
Researches Regarding Water Aeration Using a New Type of Fine Bubble Generator
M. Vlăsceanu, N. Băran and M. Băran
Microwave Induced Thermoacoustic Imaging of Osteoarthritis: A Feasibility Study
B.L. Su, W.Z. Qi, X.L. Xu, L. Huang, X.C. Zhong and J. Rong
Solid Rocket Motor Design Optimization Using Genetic Algorithm
F.M. Villanueva, L.S. He and D.J. Xu
439
443
448
452
459
464
469
476
481
487
492
498
502
Chapter 7: Monitoring and Data Processing
An Analytical Imaging Algorithm for Airborne Parallel Translational Variant SAR Data
Focusing
J.H. Ran and J.Y. Zhang
Civil Aircraft Radar Track Simulation Algorithm Based on 4D Trajectory
J.J. Liu, L.Y. Tian, Q.X. Wu and M. He
509
514
Advanced Materials Research Vol. 905
Research and Implementation of Complex Modulo Operation Algorithm Based on FPGA
L.Y. Tian and F. Qi
Application of Independent Component Analysis in Machine Fault Diagnosis
F. Miao and R.Z. Zhao
Text Document Classification Using Support Vector Machine with Feature Selection Using
Singular Value Decomposition
H.M. Dau and N. Xu
Research on Visualization of the Wind Field Streamline Based on GRIB Data
Y.E. Hou, L.X. Dang and Y.F. Kong
Facial Expression Recognition Based on Gabor Features Combined with Fast PCA and
SLLE
C.H. Wang, H. Wang and Z.N. Li
Fast Face Recognition on GPUs
Y. Lei, X.Y. Fan and M. Zhang
Multiwavelet-Based Image Fusion Method Using Unit-Linking Pulse Coupled Neural
Networks
X. Cai, H. Guang and J.K. Wang
Research on Discrete Fourier Transform Representation for Image Quality Assessment
S.L. Zhao and X.H. Ji
Design and Implementation of the Object Video Surveillance Base on Smart Phone
Terminal
G.R. Zeng and G. Liu
Improved DV-Hop Localization Algorithm Based on Modifying Hop Distance
Y. Yuan, L.Y. Li and C.L. Li
Research on Automatic Monitoring System for the Construction and Protection of the
Approaching Metro Tunnels Based on LabVIEW
G.F. Ren, C.R. Zhang and S.S. Zhang
The Risks of Data Transmissions in Intrusion and Hold-Up Alarm Systems and Solutions
Thereto
J. Hart and V. Nídlová
Wireless Sensor Network Based Bridge Health Monitoring System for Long-Span Bridges
J.Z. Sun and Q. Huang
The Signal Timing Method for Roundabout Based on the Constraint of Left-Turn Queue
Length
T.Z. Chen and Z.Z. Wu
Unmanned Aerial Vehicle Based Agricultural Remote Sensing Multispectral Image
Processing Methods
Y. Zhao, F.F. Meng and J. Feng
e
519
524
528
533
537
543
548
552
556
560
565
570
575
580
585
Chapter 8: Communications and Networking
Adaptive Beam Forming Algorithm of Anti-Jamming GNSS Terminal Research
H.J. Ma, M. Li, K. Wang and Z.M. He
An Energy Efficient Communication Routing Protocol Based on LEACH for WSN
Y.X. Zhai, L.Y. Li and C.L. Li
Analysis and Optimization of Rail Vehicles Networked Control System Based on Static
Scheduling Algorithm
C.Y. Zhu and Q.Y. Guo
Multiuser Detection with Delay Feedback Scheme for Asynchronous Cooperative Networks
Y.H. Zhang, Z.M. Zeng and T.K. Zhang
Research and Implementation on CDR Synthesis Scheme of GTPV2 Protocol in LTE
Network
D. Ran, Z.Z. Zhang and Z. Li
Snap-Stabilizing Wave Algorithm with Multiple Initiators in Arbitrary Networks
G. Nandakumaran and M.H. Karaata
The Improvement of MIPv6 Protocol with Point-to-Point Tactics
Q.G. Hu
591
595
600
611
615
619
623
f
Advances in Applied Materials and Electronics Engineering III
The Development of a Local Area Network Communication Software Based on Peer-to-Peer
Mode
J.Y. Zhao and H. Guo
The Remote Management System for Greenhouses Based on 3G and Power Line Carrier
M.L. Zhao, H.G. Li and X.J. Zhang
627
631
Chapter 9: Information System and Computer
A Survey of Using Weakly Supervised and Semi-Supervised for Cross-Domain Sentiment
Classification
H.M. Dau, N. Xu and T.K. Truong
Virtual Machine Deployment Strategy Based on the CPU Weights
Y. Deng, C.L. Li and L.Y. Li
Applying QFD and Kano Model to Experience Design for Cultural Tourism on Mobile
Device: An Example of Leifeng Pagoda, Hangzhou, China
S.S. Zhu and X.Y. Tu
Computional Dynamics for Diffusionless Lorenz Equations with Periodic Parametric
Perturbation
Z. Wang, Y.X. Li, X.J. Xi and X.F. Wang
Research on the Current Development Situation of the Third-Generation Search Engine
L.N. Zhang, Z.Y. Yang and B. Yang
Research on Recognition of Maize Disease Based on Mobile Internet and Support Vector
Machine Technique
L.N. Zhang and B. Yang
Action Design of Information Systems Security Governance for Bank Using COBIT 4.1 and
Control Standard of ISO 27001
I.G. So, N.J. Setiadi, B. Papak and R. Aryanto
Biometric Identification on the Basis of Facial Features and Modifications Thereof
V. Nídlová, J. Hart and M. Hruška
Development of a Racing Game Based on iOS
J.Y. Zhao, H. Guo and W. Wei
The Design of Intelligent Apartments for the Elderly Remote Management Control System
Based on 3G
Y.J. Chen, P.X. Liu, P.F. Jin and Y.J. Guo
Quality of Service for Cloud Computing
S.F.S. Al-Shehri and C.L. Li
Data Security and Data Privacy in Cloud Computing
W. Al-Museelem and C.L. Li
Cloud Services for Hotel Industry
A.K. Musab, C.L. Li and H.A.H. Naji
Three-Dimensional Geological Modeling of Mining Subsidence Prediction Based on the
Blocks
J.B. Liu, H.Y. Dai, X. Wang, A. Shynar and G. Madimarova
Firepower Assignment of Ship-to-Air Missile System
Y.H. Lu, J.H. Dou, X.B. Yang and C.W. Zhu
Customer Interface Preferences to Ecotourism Destination Website
R. Aryanto, Trisnasari, H. Sarjono and I.G. So
637
642
647
651
655
659
663
669
673
677
683
687
693
697
702
706
Chapter 10: Management and Education
Framework Design of Information Integration Based on Web Service
J. Tian
The Influential Mechanism Research of Leisure-Skill Sharing Intention of the Elder Adult
within Community in Hangzhou: Based on the Social Exchange Theory
S.S. Zhu and Y.Q. Zhang
713
717
Advanced Materials Research Vol. 905
The Study and Application of Middle School Teacher Evaluation System Based on Support
Vector Machine
B. Yang and L.N. Zhang
Application of Kmeans Algorithm with Pearson Coefficient in College Student Sports
Quality and Sports Resources
L.Z. Xi and W. Lu
Dual Resource Constrained Job Shop Scheduling Based on Compressed Time Window
Y. Huang, X.T. Yan and J.Y. Li
Application of the Internet of Things in Colleges' Management
L.N. Li and P.F. Zhao
Contractor Prequalification in Taiwan
F.Y. Chiang and P. Luarn
The Planning of Urban Public Facilities via Universal Design
Y. Han, Z.F. Liu, J. Dai, S.F. Ge and Y. Wang
Resource Leveling in the Project Design Process by Petri Net Using
V. Kuzenkov, A. Zebzeev and E. Gromakov
Toward a Modified UTAUT Model for IT Acceptance by Senior Citizens: Using Technology
Life Style as an Individual Difference Factor
H.K. Lu and P.C. Lin
Feasibility Study of Agricultural E-Commerce Transactions
L. Dan
Assessing Pedestrian Profile According to Age and Gender in Central Business District,
Kuala Lumpur, Malaysia
N.I. Bahari, A.K. Arshad and Z. Yahya
Research on the Influencing Factors of Cookware Buy Online Based on the Consumer
Lifestyles
C.F. Lu, Y.P. Jiang and J.F. Wu
Vocabulary Resource in Coursebooks - A Computer-Aided Analysis
J. Lu
The Moral Hazard Effect of Vehicle Insurance on Road Safety in China
G.N. Zhang, X.P. Gong and Y.L. Zhao
On the Growth of Entire Function Defined by Multiple Taylor
W.C. Lu and Y.H. Peng
g
721
725
731
736
742
748
752
757
764
768
773
777
781
786

Download Report