CAT40 FlexPack-12 2014 Premium Tool Holding Systems Pick 6 Collet Chucks and 6 End Mill Adapters at a Promotional Price of $1,299 (your choice from the list below) and receive 1 Collet Set and 1 Locking Fixture FREE! That’s up to $1,042 in SAVINGS! Add Jet-Blast to the End Mill Holders for $160.00 more! * Choose 6 Collet Chucks Choose 1 Collet Set below FREE from below, mix or match QTY PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION CAT40-ER11H-0250 CAT40-ER11 X 2.50" LIST PRICE $135.00 ER11 ISET 7PCS ER11 INCH SET 7 PIECES $155.00 CAT40-ER11H-0400 CAT40-ER11 X 4.00" $140.00 ER11 MSET 13PCS ER11 METRIC SET 13 PIECES $289.00 CAT40-ER16H-0250 CAT40-ER16 X 2.50" $132.00 ER16 ISET 10PCS ER16 INCH SET 10 PIECES $216.00 CAT40-ER16H-0400 CAT40-ER16 X 4.00" $140.00 ER16 MSET 10PCS ER16 METRIC SET 10 PIECES $224.00 CAT40-ER20H-0250 CAT40-ER20 X 2.50" $135.00 ER20 ISET 12PCS ER20 INCH SET 12 PIECES $267.00 CAT40-ER20H-0400 CAT40-ER20 X 4.00" $140.00 ER20 MSET 12PCS ER20 METRIC SET 12 PIECES $274.00 CAT40-ER25-0250 CAT40-ER25 X 2.50" $142.00 ER25 ISET 15PCS ER25 INCH SET 15 PIECES $333.00 CAT40-ER25-0400 CAT40-ER25 X 4.00" $149.00 ER25 MSET 15PCS ER25 METRIC SET 15 PIECES $333.00 CAT40-ER32-0250 CAT40-ER32 X 2.50" $148.00 ER32 ISET 18PCS ER32 INCH SET 18 PIECES $407.00 CAT40-ER32-0400 CAT40-ER32 X 4.00" $152.00 ER32 MSET 18PCS ER32 METRIC SET 18 PIECES $407.00 CAT40-ER40-0250 CAT40-ER40 X 2.50" $175.00 ER40 ISET 13PCS ER40 INCH SET 13 PIECES $357.00 Choose 6 End Mill Adapters LIST PRICE 1 Locking Fixture FREE from below, mix or match QTY QTY PART NUMBER DESCRIPTION LIST PRICE CAT40-EM012-0250 CAT40 1/8 END MILL X 2.50" CAT40-EM018-0250 CAT40 3/16 END MILL X 2.50" $ 85.00 CAT40-EM025-0250 CAT40 1/4 END MILL X 2.50" $ 85.00 CAT40-EM025-0400 CAT40 1/4 END MILL X 4.00" $ 99.00 CAT40-EM031-0250 CAT40 5/16 END MILL X 2.50" $ 95.00 CAT40-EM031-0400 CAT40 5/16 END MILL X 4.00" $ 110.00 CAT40-EM037-0250 CAT40 3/8 END MILL X 2.50" $ 85.00 CAT40-EM037-0400 CAT40 3/8 END MILL X 4.00" $ 99.00 CAT40-EM050-0250 CAT40 1/2 END MILL X 2.50" $ 85.00 CAT40-EM050-0262 CAT40 1/2 END MILL X 2.62" $ 85.00 CAT40-EM050-0400 CAT40 1/2 END MILL X 4.00" $ 105.00 CAT40-EM062-0250 CAT40 5/8 END MILL X 2.50" $ 85.00 CAT40-EM062-0300 CAT40 5/8 END MILL X 3.00" $ 90.00 CAT40-EM062-0400 CAT40 5/8 END MILL X 4.00" $ 105.00 CAT40-EM075-0250 CAT40 3/4 END MILL X 2.50" $ 90.00 CAT40-EM075-0300 CAT40 3/4 END MILL X 3.00" $ 90.00 CAT40-EM075-0350 CAT40 3/4 END MILL X 3.50" $ 90.00 CAT40-EM075-0400 CAT40 3/4 END MILL X 4.00" $ 105.00 CAT40-EM087-0350 CAT40 7/8 END MILL X 3.50" $ 100.00 CAT40-EM100-0300 CAT40 1" END MILL X 3.00" $ 110.00 CAT40-EM100-0400 CAT40 1" END MILL X 4.00" $ 95.00 $ 85.00 9700 Madison Road Montville, OH 44064 800-445-1068 440-968-3228 Fax: 440-968-3611 [email protected] QTY PART NUMBER DESCRIPTION TLD-CAT40 CAT40 Locking Fixture LIST PRICE $200.00 * What is Jet-Blast? Coolant Ports for around solid cutters. I want Jet-Blast on my End Mill Adapters for an additional $160.00 YES NO Highest Quality ✓More Features ✓The -All Holders Ground @ ≤0.0001” -DIN AD+B Flange Coolant Taper to Bore -Exceed AT3 Taper Tolerances Best Balance ✓The -Dynamically Balanced to 20,000 RPM’s STANDARD! -Shiny Finish Options ✓More -More standard lengths than competitive lines Pioneer Premium Tool & Work Holding 641 Fargo Ave, Elk Grove Village, IL 60007, USA T: 847-593-6000 F: 800-930-6436 E: [email protected], www.PioneerNA.com Sorry no substitutions, additions or subtractions from the items in this promotion. All pricing is in US Dollars. Promotion ends December 31st 2014 CAT50 FlexPack-12 2014 Premium Tool Holding Systems Pick 6 Collet Chucks and 6 End Mill Adapters at a Promotional Price of $1,769 (your choice from the list below) and receive 1 Collet Set and 1 Locking Fixture FREE! That’s up to $1,206 in SAVINGS! Add Jet-Blast to the End Mill Holders for $160.00 more! * Choose 6 Collet Chucks Choose 1 Collet Set below FREE from below, mix or match QTY PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION CAT50-ER16H-0250 CAT50-ER16 X 2.50" LIST PRICE $225.00 QTY ER16 ISET 10PCS ER16 INCH SET 10 PIECES LIST PRICE $216.00 CAT50-ER16H-0400 CAT50-ER16 X 4.00” $175.00 ER16 MSET 10PCS ER16 METRIC SET 10PIECES $224.00 CAT50-ER16H-0600 CAT50-ER16 X 6.00" $190.00 ER20 ISET 12PCS ER20 INCH SET 12 PIECES $267.00 CAT50-ER20H-0250 CAT50-ER20 x 2.50” $225.00 ER20 MSET 12PCS ER20 METRIC SET 12PIECES $274.00 CAT50-ER20H-0400 CAT50-ER20 X 4.00" $180.00 ER25 ISET 15PCS ER25 INCH SET 15 PIECES $333.00 CAT50-ER20H-0600 CAT50-ER20 X 6.00” $180.00 ER25 MSET 15PCS ER25 METRIC SET 15PIECES $333.00 CAT50-ER25-0250 CAT50-ER25 X 2.50" $225.00 ER32 ISET 18PCS ER32 INCH SET 18 PIECES $407.00 CAT50-ER25-0400 CAT50-ER25 X 4.00” $170.00 ER32 MSET 18PCS ER32 METRIC SET 18PIECES $407.00 CAT50-ER25-0600 CAT50-ER25 X 6.00" $189.00 ER40 ISET 13PCS ER40 INCH SET 13 PIECES $357.00 CAT50-ER32-0250 CAT50-ER32 X 2.50” $228.00 CAT50-ER32-0400 CAT50-ER32 X 4.00" $170.00 CAT50-ER32-0600 CAT50-ER32 X 6.00” $199.00 CAT50-ER40-0400 CAT50-ER40 X 4.00" $180.00 CAT50-ER40-0600 CAT50-ER40 X 6.00” $210.00 1 Locking Fixture FREE QTY PART NUMBER DESCRIPTION TLD-CAT50 CAT50 Locking Fixture LIST PRICE $240.00 Choose 6 End Mill Adapters from below, mix or match QTY * What is Jet-Blast? PART NUMBER DESCRIPTION LIST PRICE CAT50-EM025-0250 CAT50 1/4 END MILL X 2.50" $130.00 CAT50-EM025-0400 CAT50 1/4 END MILL X 4.00" $130.00 CAT50-EM025-0600 CAT50 1/4 END MILL X 6.00" $185.00 CAT50-EM037-0250 CAT50 3/8 END MILL X 2.50" $130.00 CAT50-EM037-0300 CAT50 3/8 END MILL X 3.00" $130.00 CAT50-EM037-0400 CAT50 3/8 END MILL X 4.00" $130.00 CAT50-EM037-0450 CAT50 3/8 END MILL X 4.50" $160.00 CAT50-EM037-0600 CAT50 3/8 END MILL X 6.00" $147.00 CAT50-EM050-0262 CAT50 1/2 END MILL X 2.62" $130.00 CAT50-EM050-0300 CAT50 1/2 END MILL X 3.00" $130.00 CAT50-EM050-0400 CAT50 1/2 END MILL X 4.00" $130.00 CAT50-EM050-0462 CAT50 1/2 END MILL X 4.62" $160.00 CAT50-EM050-0600 CAT50 1/2 END MILL X 6.00" $150.00 CAT50-EM062-0300 CAT50 5/8 END MILL X 3.00" $130.00 CAT50-EM062-0400 CAT50 5/8 END MILL X 4.00" $130.00 CAT50-EM062-0600 CAT50 5/8 END MILL X 6.00" $150.00 CAT50-EM075-0300 CAT50 3/4 END MILL X 3.00" $130.00 CAT50-EM075-0400 CAT50 3/4 END MILL X 4.00" $130.00 CAT50-EM075-0600 CAT50 3/4 END MILL X 6.00" $150.00 CAT50-EM100-0300 CAT50 1" END MILL X 3.00" $130.00 CAT50-EM100-0400 CAT50 1" END MILL X 4.00" $130.00 CAT50-EM100-0600 CAT50 1" END MILL X 6.00" $150.00 CAT50-EM125-0300 CAT50 1-1/4 END MILL X 3.00" $134.00 CAT50-EM125-0400 CAT50 1-1/4 END MILL X 4.00" $134.00 CAT50-EM125-0600 CAT50 1-1/4 END MILL X 6.00" $155.00 CAT50-EM150-0400 CAT50 1-1/2 END MILL X 4.00" $145.00 Coolant Ports for around solid cutters. I want Jet-Blast on my End Mill Adapters for an additional $160.00 YES NO Highest Quality ✓More Features ✓The -All Holders Ground @ ≤0.0001” -DIN AD+B Flange Coolant Taper to Bore -Exceed AT3 Taper Tolerances Best Balance ✓The -Dynamically Balanced to 15,000 RPM’s STANDARD! -Shiny Finish Options ✓More -More standard lengths than competitive lines 9700 Madison Road Montville, OH 44064 800-445-1068 440-968-3228 Fax: 440-968-3611 [email protected] Pioneer Premium Tool & Work Holding 641 Fargo Ave, Elk Grove Village, IL 60007, USA T: 847-593-6000 F: 800-930-6436 E: [email protected], www.PioneerNA.com Sorry no substitutions, additions or subtractions from the items in this promotion. All pricing is in US Dollars. Promotion ends December 31st 2014
© Copyright 2024 ExpyDoc
