Data Sheet Copper to Fiber DVI Media Converter, 28VDC

050-205
Data Sheet
Copper to Fiber DVI Media Converter, 28VDC
D38999 (ARINC801 for Fiber Optic), D38999 (Quadrax & Pin
contacts for Signal, Power and Service Port)
REV
2
DESCRIPTION
Preliminary
DATE
6/12/2014
APPROVED
MF
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
DVI Inline Copper to Fiber Media Converter
The Glenair 050-205 Digital Visual Interface (DVI) Copper to Fiber Optic Media
Converter increases DVI operational link distance in harsh environments. It allows
both longer distance and more reliable communication on optical fibers in
ruggedized military systems using DVI protocol between graphics cards and
remote displays. This media converter is configured as either transmitter,
converting electrical DVI signals to fiber, or as a receiver, converting fiber optic
signals into the electrical DVI signals. The media converter incorporates a power
supply which has been designed to accept a wide DC input voltage range, 5V to
36V. The 050-205 is designed for harsh environments and incorporates
electronics in an environmentally sealed enclosure that incorporates three
environmental D38999 connectors. Power, Signal I/O and BIT functionality is
supplied through D38999 with a combination of Quadrax and #22D contacts. The
Fiber Optics passes through D38999 using ARINC 801 contact which can be
configured to support either single mode or multi-mode fiber applications.
KEY FEATURES/BENEFITS
 1310nm FP Lasers for SMF 10km links
 InGaAs PIN PD for SMF 10km links
 850nm Lasers for MMF up to 500m links
 GaAs PIN PD for MMF up to 500m Links
 Wide Input Voltage Range: 8-36V
 IP67 in mated condition
 D38999 with Quadrax and #22 Pin contacts
for Power, Signal and BIT I/O
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY

38999 ARINC 801 for Fiber Optic I/O
OPTIONAL FEATURES
 Built In Test Console Port accessible via USB2.0
 Built in Test Console Port accessible via UART
(RS422)
APPLICATIONS
•
Harsh Environment Ethernet for Airborne, Tactical and
Shipboard applications
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 2 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
Functional Block Diagram
Other Fiber Optic connections are possible – Contact Factory
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 3 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
Connectors
NAME
Insert
Arrangement
J1
Media Converter
Electrical Signal,
Power, and Built In
Test (BIT)
D38999 Series III type,
19Q-18
14X SIZE 22D Pins
4X SIZE 8 QUADRAX
Pins (AS39029/119)
Generic PN
D38999/26#F18SN type
with Quadrax polarization
D38999 Series III
Insert Arrangement per
ARINC 801
Glenair PN
180-159##06-15-6N-R
(D38999 Style Plug, ARINC
801 15-6 arrangement)
CONTACTS
ARINC 801
L Configuration
CONTACTS:
S CONFIGURATION:
S CONFIGURATION (MMF)
Glenair PN
181-076-P-126
126.0 micron, pull proof
design, MMF
Fiber Optic Signal
J2
Mating PLUG
Connector
Function
Glenair PN
257-606-G6##19-18SN
L CONFIGURATION (SMF)
Glenair PN
181-076-P-126S
126.0 micron, pull proof
design, SMF
Note: # = Environmental Class (Material/Finish)
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 4 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
Built In Test (BIT) Functionality – USB 2.0
This media converter can be offered with built in test functionality accessible through a Console Port via Universal Serial
Bus 2.0 (USB 2.0), via an RS422 output or both options can be made available. Functional block diagram for this is
shown below.
Universal Serial Bus (2.0) BIT
• Presents itself as a “Virtual” Communications Port
• Compatible with Microsoft Windows, Mac, and Linux OS’s.
• On the computer side, open any terminal application (PuTTY, HyperTERM, TeraTERM, etc.) to communicate with
the media converter hardware.
• Simple “Human Readable” status messages.
ALARM STATUS MESSAGES
Unit Identification Information
• Unit Serial Number
• Unit Product Code
Fiber Side Alarm/Status
• Temperature
• Transmitter TX Fault
• Transmitter Disable Status
• Receiver loss of signal (LOS) or signal Detect (SD) Status
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 5 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
TYPICAL CONSOLE PORT WINDOW (PuTTY)
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 6 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
Built In Test (BIT) Functionality – UART
This media converter can be offered with built in test functionality accessible via an RS-422 Port. Functional block
diagram for this function is illustrated in the figure below. The UART Bit message is a 10 bit message with an update rate
of 1 Hz. The message format can be seen below.
ALARM STATUS MESSAGES
• Fiber Transmitter Fault Status
• Fiber Receiver Los of Signal (LOS) Status
SERIAL STATUS MESSAGE BIT MAPPING
Bit
Description
0
Channel 0 Fiber Optic TX Fault (1 = Fault, 0 = No Fault)
1
Channel 1 Fiber Optic TX Fault (1 = Fault, 0 = No Fault)
2
Channel 2 Fiber Optic TX Fault (1 = Fault, 0 = No Fault)
3
Channel 3 Fiber Optic TX Fault (1 = Fault, 0 = No Fault)
4
Channel 0 Fiber Optic RX LOS (1 = Fault, 0 = No Fault)
5
Channel 1 Fiber Optic RX LOS (1 = Fault, 0 = No Fault)
6
Channel 2 Fiber Optic RX LOS (1 = Fault, 0 = No Fault)
7
Channel 3 Fiber Optic RX LOS (1 = Fault, 0 = No Fault)
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 7 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
Ratings and Specifications – L Version (Long Wavelength)
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Min
Storage Temperature
Ts
Supply Voltage
Typ
Max
Units
-55
+100
°C
V cc
-0.5
45
V
Symbol
Min
Max
Units
Operating Temperature
T op
-40
Supply Voltage
V cc
8
Supply Current
Icc
Notes
1 second maximum
OPERATING CONDITIONS
Parameter
Typ
+85
°C
28
36
V
100
150
mA
Notes
@28VDC
OPTICAL CHARACTERISTICS – TRANSMITTER
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical Output Power
P OUT
-6
-3
-1
dBm
1310nm Fabry-Perot
Optical Wavelength
λ OUT
1285
1310
1345
nm
3.5
nm
Typ
Max
Units
-22
-20
dBm
Δλ
Spectral Width
OPTICAL CHARACTERISTICS – RECEIVER
Parameter
Symbol
-12
-7
Min. Sensitivity, BER 10 , PRBS 2 -1,
1.65Gbps, Er=9dB
-12
-7
Overload, BER 10 , PRBS 2 -1
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
MAX
λ IN
REV: 1
∙
P IN_MIN
P IN
Optical Wavelength
1211 AIR WAY
Min
0
1100
Notes
dBm
1310
1590
nm
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 8 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
Ratings and Specifications – S Version (Short wavelength)
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Min
Storage Temperature
Ts
Supply Voltage
Typ
Max
Units
Notes
-55
+100
°C
V cc
-0.5
45
V
Symbol
Min
Max
Units
Operating Temperature
T op
-40
+85
°C
Supply Voltage
V cc
8
28
36
V
Supply Current
Icc
100
150
mA
Typ
Max
Units
Notes
-1
dBm
VCSEL, 50/125µm MMF
1 second maximum
OPERATING CONDITIONS
Parameter
Typ
Notes
@28VDC
OPTICAL CHARACTERISTICS – TRANSMITTER
Parameter
Symbol
Min
Optical Output Power
P OUT
-7
Optical Wavelength
λ OUT
830
850
Δλ
Spectral Width
860
nm
0.85
nm
Max
Units
Notes
dBm
PIN PD
OPTICAL CHARACTERISTICS - RECEIVER
Parameter
Symbol
-12
-7
Min. Sensitivity, BER 10 , PRBS 2 -1,
1.65Gbps, Er 9dB
-12
-7
Overload, BER 10 , PRBS 2 -1
©2014 Glenair, Inc.
λ
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY
Typ
P IN_MIN
P IN
Optical Wavelength
Min
MAX
IN
-22
-2
-1
770
850
-19
dBm
860
nm
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 9 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
Ratings and Specifications - (continued)
Compliance Specifications
CHARACTERISTIC
Mechanical Shock
Mechanical Vibration
Conducted Emissions,
Power Leads, 10 kHz to 10 MHz
Conducted Susceptibility,
Power Leads, 30 Hz to 150KHz
Conducted Susceptibility,
Bulk Cable Injection,
10 kHz to 200 MHz
Radiated Susceptibility,
Electric Field, 2 MHz to 18 GHz
ESD
Mating Durability
Flame Resistance
Damp Heat
Eye Safety
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY
Standard
MIL-STD-810
MIL-STD-810
MIL-STD-461F
Condition
40g
30g rms
CE102
MIL-STD-461F
CS101
MIL-STD-461F
CS114
MIL-STD-461F
RS103
MIL-STD-883
MIL-STD-38999/20
MIL-STD-1344
MIL-STD-1344
CDRH and IEC-825
Class II
500 Cycles
Method 1012
10 cycles
Class 1 Laser
Product
Notes
2200V HBM
30 seconds
24 hours
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 10 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
OUTLINE DRAWING & PANEL CUT OUT
Outline Drawing
Dimensions inches
x.x ± 0.1”
x.xx ± 0.03”
x.xxx ± 0.0015”
Please contact Factory for other configurations
Recommended Panel Cut out
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 11 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
Input/Output Definition
J1 – ELECTRICAL SIGNAL CONNECTOR
Transmitter Configuration
J1 PIN FUNCTION ASSIGNMENTS
PIN
NAME
A
VIN
B1
B2
B3
B4
C
D
TMDS0(-)
TMDS0(-)
NC
NC
USB_DP
USB_DM
DESCRIPTION
8-36V, Power
Voltage input
TMDS, Blue, Input
TMDS, Blue, Input
Do not Connect
Do not Connect
USB Data Line
USB Data Line
E
NC
Do not Connect
F1
TMDS1(-)
F2
TMDS1(+)
F3
F4
G
H
J
NC
NC
TXD_P
TXD_N
NC
*
TMDS, Green,
Input
TMDS, Green,
Input
Do not Connect
Do not Connect
RS422 Status Port
RS422 Status Port
Do not Connect
PIN
NAME
DESCRIPTION
K1
TMDS 2(-)
TMDS, Red, Input
K2
K3
K4
L
M
N
TMDS 2(+)
NC
NC
NC
GND
NC
P1
TMDS 3(-)
P2
TMDS 3(+)
TMDS, Red, Input
Do not Connect
Do not Connect
Do not Connect
Ground
Do not Connect
TMDS,Clock,
Input
TMDS, Clock,
Input
P3
NC
Do not Connect
P4
R
S
T
U
NC
VIN_RTN
NC
GND
VUSB
Do not Connect
Voltage Return
Do not Connect
USB Return
USB VBUS
*
D38999 Series III
19Q-18
Mating face for PIN shown
14X SIZE 22D
4X SIZE 8 QUADRAX
Receiver Configuration
J1 PIN FUNCTION ASSIGNMENTS
PIN
NAME
DESCRIPTION
8-36V, Power
Voltage input
*
PIN
NAME
TMDS
2(-)
TMDS
2(+)
NC
NC
NC
GND
NC
TMDS
3(-)
TMDS
3(+)
DESCRIPTION
P3
NC
Do not Connect
P4
R
S
T
U
NC
VIN_RTN
NC
GND
VUSB
Do not Connect
Voltage Return
Do not Connect
USB Return
USB VBUS
A
VIN
B1
TMDS0(-)
TMDS, Blue, Output
K2
B2
B3
B4
C
D
TMDS0(-)
NC
NC
USB_DP
USB_DM
TMDS, Blue, Output
Do not Connect
Do not Connect
USB Data Line
USB Data Line
K3
K4
L
M
N
E
NC
Do not Connect
P1
F1
TMDS1(-)
F2
TMDS1(+)
F3
F4
G
H
J
NC
NC
TXD_P
TXD_N
NC
TMDS, Green,
Output
TMDS, Green,
Output
Do not Connect
Do not Connect
RS422 Status Port
RS422 Status Port
Do not Connect
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
K1
P2
REV: 1
∙
1211 AIR WAY
*
TMDS, Red, Output
TMDS, Red, Output
Do not Connect
Do not Connect
Do not Connect
Ground
Do not Connect
TMDS,Clock, Output
TMDS, Clock, Output
D38999 Series III
19Q-18
Mating face for PIN shown
14X SIZE 22D
4X SIZE 8 QUADRAX
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 12 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-205
DVI Copper to Fiber Media Converter
D38999 (Signal, Power, BIT), D38999 (Fiber Optic)
Input/Output Definition (continued)
J2 – OPTICAL CONNECTOR
D38999 Series III ARINC 801
Transmitter Configuration
J3 PIN FUNCTION ASSIGNMENTS
PIN
A
B
C
D
E
F
NAME
TX_Blue
TX_Green
NC
TX_Red
TX_Clock
NC
DESCRIPTION
Transmitter Blue
Transmitter Green
No Connect
Transmitter Red
Transmitter Clock
No Connect
NOTES
Receiver Configuration
J3 PIN FUNCTION ASSIGNMENTS
PIN
A
B
C
D
E
F
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 1
∙
1211 AIR WAY
NAME
RX_Blue
RX_Green
NC
RX_Red
RX_Clock
NC
DESCRIPTION
Receiver Blue
Receiver Green
No Connect
Receiver Red
Receiver Clock
No Connect
NOTES
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 13 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]