Domus - CEVO

Domus
IP 55
IK 09
Class I
Class II
Domus is a stylish contemporary decorative lantern for
typical mounting up to 4m.
Its optical system is formed
by a prismatic bowl and a segmented reﬂector to achieve a
high luminous performance
while limiting light pollution.
Technical lighting catalogue 2010/12
66
Applications
Consult pages 16-19
Lamps
High pressure sodium
up to 150W
Ceramic metal halide
up to 150W
Domus
COMPONENTS
Road & Amenity lighting
1 Spigot in high pressure die-cast L-2521 aluminium alloy. Corrosion resistant, painted in
a textured black polyester powder. Provided
with an EPDM gasket molded in a single
piece.
Stainless steel bolts for column ﬁxing
(Ø 60mm) are included.
2 Clamping chuck for the trunk-conical bowl.
Made of L-2521 injected aluminium alloy. The
locking pressure is done through external
screws incorporated to the spigot.
6
3 Gear tray manufactured in temperature resistant thermoplastic material. Electromagnetic control gear incorporated.
5
4 Steel frame galvanised steel to ﬁx and adjust
the lamp holder. It is equipped with a clamp
and a feed cable connection plug.
4
5 Bowl with internal prisms made of injected
high impact methacrylate. It is formed by
two parts mechanically joined through pressure and through an adhesive.
3
2
7
6 Reflector anodised and hydroformed aluminium. Symmetrical and vertically multifacetted. The reﬂector ﬁxing is done by means of
screws internally attached to the trunk cone.
1
7 Cable connection in the spigot to allow the
cable to enter up to Ø 12mm. Connection to
the terminals by means of an internal plug.
Conventional reﬂector
Segmented reﬂector
Light control
The Domus lantern optical system incorporates the segmented reﬂector technology, allowing an increase of more than 40% in the lantern luminous performance as compared to
the equivalent conventional reﬂector. Each segment of the reﬂector is carefully oriented
in such a way that light reﬂection on the lamp and on other internal components of the
lantern is greatly reduced. This extends the lanterns service life.
Control of the direction of the light reﬂected in the lantern interior together with the
refraction of the bowl prisms, allow a decrease in light pollution, generating an optimum
photometric distribution.
67
Domus
SETS & BRACKETRY
For a further integration of lantern and column towards a more decorative arrangement, a number of brackets (consult chapter Supports) is
available. Some examples are shown here.
5m
4m
6
3m
2m
1m
1
2
3
1
2
3
4
5
6
Technical lighting catalogue 2010/12
4
Faro 1 3.5m column - with Domus IJX-SMT
Cannes 35-ICG column - with Domus IJX-SMT
Calgary 35-ICK column - with Domus IJX-SMT
Capri 35-ICE column with an IBX single bracket - with Domus IJX-SMT
Capri 40-ICE column with an IBX double bracket - with Domus IJX-SMT
IBX wall bracket - with Domus IJX-SMT
68
5
Domus
PHOTOMETRY, MODELS & DIMENSIONS
Domus IJX-SMT
Road & Amenity lighting
Domus IJX-SMT
Domus IJX-SMT
Reflector
Srd200
180 135 90
45
cd/Klm
Lamp
ST-100
140
Performance
ULOR: 10.7%
DLOR: 68.5%
60º
443
219
Reflector
Srd200
105 70
35
cd/Klm
Lamp
ST-150
501
Performance
ULOR: 11%
DLOR: 61.3%
60º
70
30º
0º
MODEL
TYPE
Domus IJX-SMT
ST/MT-70
ST/MT-100
ST/MT-150
30º
30º
SHAPE
0º
60
30º
LAMP HOLDER
REFLECTOR
BOWL
E27
E40
E40
Srd200
Methacrylate
high impact
ST (High pressure sodium)
MT (Ceramic metal halide)
W.a. (m2)
0.186
Kg*
6.12
6.44
6.76
W.a. (Windage area)
Kg* (Weight without lamp)
For more information about lamps, consult pages 486-489.
ACCESSORIES
50mm spigot kit
60mm 1”G adapter
Kg
To ﬁx the Domus IJX lantern to a Ø 50mm column
To ﬁx the Domus IJX lantern to a column/bracket with a 1”G joint nut
0.17
0.45
50mm spigot kit
60
50
60mm 1”G adapter
40
1”G
60
69
85
603

Download Report