mobile phone software repair, flashing and unlocking guide

MOBILE PHONE SOFTWARE REPAIR/FLASHING AND
UNLOCKING GUIDE
Good day my esteem reader, my name is Arinze Aniagba,, a successful internet
and non-internet business practitioner and the CEO of FFelicity
elicity Global Nigeria,
Nigeria a
reputable internet marketing and training organization both online and offline. I
have been into internet marketing business and training for over 5 years now
training thousands of fellow Nigerians and non-Nigerians both online and offline
about financial independent
nt via internet and non-internet business.
Honestly speaking, internet is like another planet where you are exposed to so
many opportunities. Gone are those days when you stay idle waiting for whitewhite
collar jobs that are nowhere to be found. It’s high time you open your eyes widely
because there is an adage that says “whenever you woke up from your bed, that
is your own morning” so my dear, it’s not yet too late to start thinking positively
towards changing your life.
>>>WHO
WHO CAN READ THIS GUI
GUIDE<<<
This guide is exclusively dedicated to all Students, Teachers, Graduates,
raduates,
Undergraduates, Youth Corpers
orpers, Doctors, Lawyers, Lecturers, Retiree, Civil
Servants, Traders, and Cooperate Individuals.
On this guide, I will be teaching step
step-by-step on how to become a mobile phone
software repair engineer and use it to make money or for your own personal use.
use
However, there are two main mobile phone repair methods which are
1. Software Repair (use of computer to trace faults and fix it through flashing)
2. Hardware Repair (use of screws to dismantle phones and trace faults using
meter).
1
But on this tutorial, we will be concentrating most on “Software Repair” which
comprises of flashing, formatting and hard resetting.
1. “Flashing” can be explained as a means of reloading an operating system (OS)
or firmware of any mobile phone when a phone is said to be malfunctioning (such
as restarting, tripping-off, slow in processing/booting, freezing/hanging, constant
displaying of error pop-up messages on the screen, etc) such phone must have
contacted virus and needs to be “Flashed” for proper functioning. After successful
flashing, the phone will have a new look and interface depending on the version
of firmware you used to conduct the flashing. Note that every data stored on the
phone will be wiped off and the original firmware will be replaced with the
firmware or OS used.
2. “Formatting and Hard Resetting“ are two similar methods of mobile phone
software repair but it’s not like “flashing”. This particular method is done only
through some “key combinations” and “codes”. This method will only wipe off all
data stored on the phone but will not wipe its original firmware. This method is
said to be used if you do not know how to “flash” a mobile phone.
“Flashing” is recommended because it will completely fix any hidden issues on
the phone there by giving it a new appearance than “Formatting/Hard
Resetting”.
By the time you must have finished reading this guide, you will be able to “flash,
format and hard reset“ any mobile phone and make money while doing the
business.
>>>HOW TO MAKE MONEY THROUGH MOBILE PHONE SOFTWARE
REPAIR<<<
As you all know that since the emergence of GSM/Mobile Phone, communication
has been the thriving business as there are so many people using it.
In the world today, there is no single person that does not have a mobile phone.
As the population of people increases, so as the population of mobile phone users
also increases. Mobile phone as a device tends to develop software problems
2
which will be fixed through flashing. This alone will help you understand that
mobile phone software repair/flashing is a very lucrative business as you can be
able to flash 10 to 15 mobile phones for other people daily depending on your
location and make good money. In some areas, you can charge N1000 for flashing
a single phone depending on the model and it will not take up to 5minutes and
the job is done as simple as ABC. Now multiply 15 phones you flashed per day by
N1000 which will be giving you a whooping N15,000 imagine that. Now multiply it
by 30 days (1 month), this will give you N450,000 monthly. Highest you will spend
N50,000 as your monthly expenses and save N400,000.
>>>REQUIRED TOOLS FOR THIS BUSINESS<<<
Laptop or Desktop Computer
Flashing Software
Firmware/Flash Files/OS
USB Cable
Nokia PC Suite
Flash Box
Flash Cables
“Computer” is one of the compulsory tools needed for the business to prosper.
You can use desktop computer as a beginner but laptop is most recommended for
portability. The computer is where you will install the necessary software
required for flashing mobile phones. Any computer/laptop with a configuration of
at least 1GB RAM and 120GB Hard Disk can serve you for the business. But in a
case where by you have enough capital, you can buy higher configuration laptop,
because this will help your work to be faster and smooth during flashing.
“Flashing Software” is a program designed for “FLASHING” which will be installed
on the computer. There are so many “flashing Software” but we will be
discussing few of them since they all execute almost the same function. Flashing
Software varies from mobile phone likewise procedures of using them.
The list below is used for flashing NOKIA and other phones.
3
1. Infinity Best Software
2. JAF Software
3. Cyclone Software
4. MobileEx (MX KEY) Software
5. UFX MICRO Box Software
“USB Cable” is used to connect phone to laptop/computer for flashing or reading
the mobile phone contents.
>>>SCREEN SHOT OF USB CABLE<<<
“Nokiai PC Suite” is a software used for backing up data and files on nokia
phones. It consists of nokia USB drivers which are very important during flashing
of any nokia phones.
4
“Firmware” is an operating system of a mobile phone
phone.. It is highly required for
flashing
shing any mobile phone. Firmware is either in a zip file format or in an
installable file format (executable file). For example, you can download all nokia
original “firmware” from www.allnokia.ru/firmware and HTC firmware from
www.androidruu.com while other phone model can be downloaded from various
sites online through Google search. There are three (3) main nokia “flash files”
which are very important for successfu
successfull flashing to take place. This three (3) main
flash files are manually added into “Flashing Software” after unzipping onto your
hard disk but automatically added into ”Flashing Software” if the OS/Firmware is
in installable format like the firmware you dow
downloaded from
www.allnokia.ru/firmware . YYou can also download “NaviFirm” from my website
www.felicityglobal.com.ng and unzip it on
n your laptop for downloading
download all nokia
5
latest “firmware/flash files”. Note that “NaviFirm” is only used for downloading
zip file format which you will add manually into your flashing software.
The three (3) main flash files are
SYMBIAN NOKIA PHONES(all nokia
sv60 from 1st to 5th edition)
CORE
PRD
UDA
1. MCU or Core
JAVA NOKIA PHONES(all nokia sv40
edition)
MCU
PPM
IMAGE/CNT
2. PPM or PRD
3. Image or UDA
I vividly understand that by now, you are confused with the files name but I will
elaborate more on the file according to its specific use in terms of SYMBIAN and
JAVA mobile phones. The table below will help you understand more.
If you are still confused on how to choose the correct file while preparing to flash
nokia phones, I recommend you use installable nokia flash files and “Infinity Best”
flashing software for this will automatically add those flash file (MCU, PPM, UDA
and any other required flash files) without any hassles. Note that you can still
identify MCU/CORE as the higher in size in terms of its MB or GB then followed by
PPM/PRD and lastly IMAGE/UDA. But some new nokia phones now do have
bigger size on IMAGE/UDA than MCU/CORE.
“Flash Box” is like a device that has port where you can plug in your “Flash Cable”
for flashing mobile phones. There are so many “Flash Boxes” such as
6
1. Infinity Box
2. JAF Box
3. Cyclone Box
4. MobileEx(MX KEY) Box.
5. UFX MICRO Box (for flashing Samsung Phones)
“Flash Cable” is one of the tools that accompany “Flash Box” kit. It is used for
flashing mobile phones that has no USB Port or damaged USB Port. It is shorter
7
unlike USB Cable and has a terminal ending contained in a small box with a white
cable.
>>>SCREEN SHOT OF FLASH CABLE<<<
>>>LIST OF FLASHABLE MOBILE PHONES<<<
You can flash any mobile phone ranging from
Nokia
Samsung (android and non-android)
LG (android and non-android)
BlackBerry
Iphone (all i-devices)
SonyEricson
Sagem
HTC
Tecno
iTel, etc
But on this Guide/Tutorial, we will concentrate most on how to flash
1. Nokia
2. BlackBerry
8
3. Samsung
The phones listed above are the most used mobile phones.
So by now, am sure that you have seen the required tools needed for the
business. We will start to explain step-by-step on how to “Flash” and “Hard
Reset” any of them.
>>>NOKIA PHONE CATEGORY/CLASS<<<
Nokia phone has two (2) main classes of phone which are
1. BB5
2. DCT4
“BB5” are all nokia phones with camera (all sv40 and sv60).
“DCT4” are all nokia phones without camera (all nokia torch light phones without
camera).
>>>HOW TO FLASH NOKIA PHONES<<<
Nokia phones can be flashed with so many boxes and software but we are more
concern on those ones that are fast and easy which are.
1. Infinity Box
2. JAF Box
3. Cyclone Box
4. MobileEx(MX KEY) Box.
>>>INFINITY BEEST<<<
9
Infinity Best flashing software is the most used flashing software. It is used for
both flashing and security code unlocking. It has so many advantages over other
flashing software. Currently, flashing phones with “infinity” software is as easy as
ABC because it has no “Box” or “Flash Cables” to be used. All you need is a USB
Cable, matching firmware for the phone you want to flash and your “Infinity
“software installed on your laptop, then you are good to go. You can visit my
website on www.felicityglobal.com.ng to download the latest “Infinity Best
Software” and other relevant software.
Step 1:
Identify the model of the nokia phone you want to flash by opening the back
cover or by dialing *#0000#.
Step 2:
Check the version and the “RM” inside the phone after dialing *#0000# and
download the higher version or the same version. But never flash any phone with
a lower firmware version for this might brick/damage the phone beyond repair.
Step 3:
Now install the firmware if it is an installable firmware or extract it from the zip
file on to your hard disk.
Step 4:
Open the Infinity Best Software you downloaded from my website
www.felicityglobal.com.ng and unzip it inside your local disk, open InfinityBox
folder > BEST > Infinity Best > and “right click” on “best” then send to “Desktop”.
Step 5:
Double click on the “best” shortcut on the desktop
. When it opens, click
on “select model” and select the “RM or RH or RHV or RX or RA” of the nokia
phone you initially installed its firmware which you downloaded from
10
www.allnokia.ru/firmware (you can view the RM or RH or RHV or RX or RA by
dialing *#0000# or by removing the back cover of the phone) It is recommended
that you dial *#0000# to view internal phone version and “RM or RH or RHV or RX
or RA” because atimes the sticker pasted at the back cover of the phone do
contain wrong RM or RH or RHV or RX or RA number of the phone especially
“Refurbished or Cloned phones” there by confusing you while trying to select the
appropriate RM during flashing. But if the phone is displaying only white screen or
restarting on booting, you can use “Flash Box and Flash Cable” to view the
internal content of the phone (like VERSION and RM or RH or RHV or RX or RA of
the phone). Once you select the appropriate “RM”, the MCU, PPM, and
IMAGE/CNT/UDA column will be filed automatically whereas some phones do
have more than one PPM and CNT ranging from 1 to 3 depending on the model.
Note that you can add MCU, PPM, and CNT manually by clicking on the MCU,
PPM, and CNT button if you don’t have the installable nokia firmware for the
particular nokia phone you want to flash.
Step 6:
Tick “DeadMode” box.
Step 7:
Untick “Backup” box.
Step 8:
Click on “Flash Mode Settings” and select “Full Flash”.
Step 9:
Now remove the battery of the nokia phone and then plug with the matching USB
Cable to the laptop.
Step 10:
Click on “FLASH” and then insert back the fully charged battery while the phone is
still plugged to the laptop and press “power button” once..
11
Step 11:
Allow the “Infinity Best” flashing software to complete the flashing process until
it displays a “successful message” like “Flashing done” on
n the right hand side
corner of the software. It will produce a sound after successfully flashing the
phone and the phone will automatically turns “ON”.
PLEASE NOTE THAT PHONES ARE NOT INTERUPTED DURING FLASHING PROCESS.
>>>SCREEN SHOT OF INFINITY BEST FLASHING
LASHING SOFTWARE <<<
>>>BEFORE FLASHING<<<
>>>AFTER FLASHING<<<
12
>>>JAF<<<
JAF is another flashing software but it is one of the oldest flashing software. It is
best used for flashing DCT4 nokia phones and security code unlocking.
unlocking
>>>SCREEN
SCREEN SHOT OF JAF FLASHING SOFTWARE<<<
13
>>>CYCLONE
CYCLONE and MobileEx (MX KEY)
KEY)<<<
CYCLONE and MX KEY are used for flashing and unlocking nokia phones. They
possess advanced features for Security Code Unlock and Network Unlock. This
two flashing software are not recommended for beginners. Any mistake made
during the use of this two software for flashing can damage the Network Security
of the phone there by displaying white screen with “CONTACT SERVICE” in red
color. It is recommended for advanced users.
14
After flashing any nokia phone with JAF, CYCLONE, or MX KEY, it will not reboot
the phone but INFINITY BEST will automatically reboot the phone. This is one of
the advantages Infinity Best has over other flashing software.
>>>SCREEN SHOT OF CYCLONE AND MXKEY FLASHING SOFTWARE<<<
SOFTWARE
>>>CYCLONE
CYCLONE FLASHING SOFTWARE
SOFTWARE<<<
15
>>>MX KEY FLASHING SOFTWARE<<<
16
17
>>>COMPARISON<<<
INFINITY BEST
Automatically removes security code
Automatically reboots the nokia phone
after flasshing
Flash box is not needed but only USB
Cable
JAF, CYCLONE, AND MX KEY
Manually removes security code
You must remove and insert battery
back after flashing
Flash box is needed before flashing
occur
>>>HOW TO FORMAT/HARD RESET NOKIA PHONES<<<
Aside flashing nokia phones, you can as well format/hard reset it. This method of
software repair is used when you don’t have experience on flashing. It will only
wipe off all the data stored in the phone but will not wipe its firmware/OS.
If a nokia phone is hanging or slow in booting, you can simply format/hard reset
it.
FIRST METHOD
Step 1: Press *#7370# on the phone while it is “on”
Step 2: Type 12345 or any code you used to lock the nokia phone before.
Step 3: Wait for the phone to restart.
Step 4: You are done formatting the phone.
SECOND METHOD
Note that you can still “Format/Hard Reset” the nokia phone while it is turned
“off”.
18
SECOND METHOD
If you cannot access the phone normally or it is unable to boot-up due to certain
reasons, you need to use some key combinations to get your nokia Symbian
device working again.
Method to Hard Reset Nokia N8, Nokia C7, Nokia E7 and other Symbian ^3 or
Anna at Boot-up
1. Make sure the device is turned off
2. Press and hold these listed keys:
*Menu key,
*The Camera and
*The Volume Down button
*Then press The Power key (ON & Off button) together to turn on the phone.
Make sure you hold them (The 4 keys) until the device asks for your
location/country.
This hard reset button combination perfectly works on other Symbian ^3 and
Symbian Anna & Belle, touch-screen Smartphone.
Method to Hard Reset Nokia N97 at Boot-up
1. Make sure your Nokia N97 is turned off
2. Hold the following keys:
*Left Shift key,
*The Space Bar and
19
*The Back key
*Then the Power key simultaneously
Make sure you hold them until the device asks for your location/country.
Method to Hard Reset Nokia 5800 at Boot-up
1. Power off the phone or re-insert the battery
2. Press and Hold the below keys:
*Green key,
*Red call keys and
*The Camera capture key
*Then the Power key at the same time.
Hold them until the device boots up and asks for location/country.
METHOD to Hard Reset Other Nokia Phones
For other Nokia phones, I mean only Nokia Symbian phones with normal keypads
such as Nokia E5, N95, N81, N73, E65, E51, E55, Including Symbian v2 like Nokia
N70, Nokia 6600, 6630,3230 etc. you can perform a hard reset by using the key
combination that works for all S60V3 phones.
1. Re-insert the battery or power off your phone
2. Press and hold the following keys:
*Star (*) key,
*Key 3, and
*Call or green key
20
*Then Power key simultaneously
Keep holding till the phone boots up and asks for your location/country.
>>>HOW TO FLASH BLACKBERRY PHONES<<<
BlackBerry phone is another type of phone that tends to develop software
problem. When a BlackBerry phone is slow on booting, hanging, displaying
application error messages like (error 502, 507 etc), such BlackBerry needs to be
reloaded/flashed for proper functioning. Always remember to backup your data
on your BlackBerry using Blackberry Desktop Manager before reloading/flashing
it.
All BlackBerry users have received different App Error screens from 205, to 523,
to 507. Most people have no clue what these mean or why they're kicked. '507' is
the most common and well known, as it means the device software needs to be
loaded. Below is a list of all Application Errors you may come across.
Application Error List:
** 101 Internal JVM error.
** 102 Invalid code in file system. The .cod files in the handheld have been
checked for modification and it has been determined that there is a problem with
one or more .cod files.
** 103 The starting address for the boot .cod file cannot be found. This might
mean that a boot .cod file has not been installed on the handheld, or that its
format is invalid or corrupt.
** 104 An uncaught Java exception was thrown in the Java code and diagnosed by
the JVM. Execution can be continued or the handheld can be attached to a
debugger on a desktop through a serial or USB cable. The event log should
contain the trace back of the thrown exception.
** 105 An OS file system API returned an error status for a certain operation. This
can indicate a corrupt file system or an error in the JVM.
21
** 106 An error has been detected in the graphics system of the handheld.
** 107 Internal JVM error.
** 108 Internal JVM error.
** 109 Internal OS error.
** 110 Non-idle event downtime error. A problem has been detected in the
accumulation of JVM down time that represents how long the JVM has been idle.
This indicates an error in either the OS code or the JVM code.
** 200 Application manager threw an uncaught exception. The application
manager event thread threw an uncaught exception and so cannot continue
running.
** 201 Initialization of the cryptographic system failed and the handheld cannot
continue to operate.
** 202 An attack on the key store has been detected, and the handheld cannot
continue to operate.
** 203 The application manager console process, usually the Home screen ribbon,
has failed, like due to an uncaught exception.
Code 3xx
• 310-314: Hardware failure Perform a hard reset on the handheld: Shut down,
remove the battery wait a few second... replace battery then see when happens
when it starts OR Run Application Loader to reload the operating system and
applications onto the handheld. Note: If these tasks do not resolve the error,
contact your service provider.
• 320-325: AMX failure Run Application Loader to reload the operating system
and applications onto the handheld.
• 330-339: Application tasks failure Run Application Loader to reload the
operating system and applications onto the handheld.
• 340-343: Memory failure you receive one the following error messages on your
handheld: Cause Memory failure. Resolution Reduce the number of calendar
appointments synchronized to your handheld.
1. In BlackBerry Desktop Manager, double-click the Intellisync icon. Click
22
Configure PIM. The Handheld Configuration window appears.
2. In the Handheld Applications list, select Calendar.
3. Click Configure > Advanced Settings. The Advanced Settings for Calendar
window appears.
4. In the Date Range tab, perform one of the following tasks to reduce the
number of calendar appointments synchronized to your handheld: If you click the
Transfer only Future items option, only future calendar appointments will be
synchronized to your handheld. If you click the Transfer items within a range of
Days option and enter date range in the fields provided, only the calendar
appointments that scheduled within the date range will be synchronized to your
handheld.
5. Click OK to save your changes and close the window.
6. In the Handheld Configuration window, ensure that the check box beside the
Calendar application is selected, and then click OK.
7. In the Intellisync window, ensure that the Synchronize PIM check box is
selected, and then click Synchronize Now. The number of calendar entries on your
handheld is reduced. If you still receive the error Run Application Loader to reload
the operating system and applications onto your handheld.
• 350-359: Software application failure you receive one of the following error
messages on your handheld: Device Error 350, 352, 353, 354, 355, 356, 357, 358,
359 Cause Software application failures. Resolution Perform a hard reset on the
handheld OR Run Application Loader to reload the operating system and
applications onto your handheld. In the Application Loader Wizard window, do
not select any third party applications. In the Advanced options, select the Erase
all currently installed applications check box
• 360-363: Flash memory failure Run Application Loader to reload the operating
system and applications onto the handheld.
• 365-368: This one is often followed by Contact your service provider.
23
Code 4xx
• 400-564: Breaking lines, system data link lost, possibility of bad sector in hard
drive
• 410: Radio Failure
• 411: Battery Error, Replace Internal or External Battery module
• 499: Software problems, continue to handheld device OS installation or
application updates via Apploader
** 501 Internal error.
** 502 All processes exited. The last Java process has terminated, and there is
nothing left to execute.
** 503 Internal error.
** 504 Internal error.
** 505 Internal error.
** 506 An uncaught Java exception was thrown in the initial VM Java thread thus
killing the only live thread in the system. The event log contains the trace back for
the exception.
** 507 A dependency on a .cod file could not be satisfied due to a missing .cod
file. Load the missing .cod file onto the handheld.
** 508 Invalid object. A problem has been detected with a debugger command to
the VM.
** 516 Error occurred during garbage collection, which might indicate a corrupted
file system.
** 510 All threads are waiting on objects, which results in a deadlock. The system
cannot recover from this state since no thread can release a lock.
** 511 A problem has occurred during debugging.
** 515 The reachable objects form a group that cannot be represented properly
by the VM because there are too many objects or the total size of the objects is
too large.
** 516 When committing a persistent object, the VM found that the persistent
store id counter has reached its limit. The object was not committed.
** 517 An inconsistency has been detected in the VM persistent object store.
24
** 518 Internal error.
** 519 Internal error.
** 520 Internal error.
** 521 Indicates that Object wait() has been executed by a thread that holds a
lock on another object; occurs only in simulator if the Jvm Debug Waits
application switch.
** 522 A thread has acquired two locks on objects in an order that doesn’t match
the order that previous locks for the two types were acquired, which indicates a
future potential deadlock situation; reported only in the simulator when the Jvm
Debug Locks application switch is set.
** 523 A critical Java process has died and the device cannot continue to operate
normally.
** 524 An object has been marked as recovered by the Low Memory Manager but
it was not freed during a garbage collection. This is only checked in the simulator
under the control of the Jvm Debug LMM application switch.
** 525 Bad persistent object. An auto-commit operation during a garbage
collection has detected a non-persistent object reachable from the persistent
store root. The type of the object has been output into the event log.
** 526 The class definition for java.lang.Object cannot be found.
** 527 The class definition for java.lang.String cannot be found.
** 528 The file system is corrupted. Data on the handheld is unrecoverable.
** 529 The file system is corrupted. An attempt is going to be made to recover
data, but some data might be lost.
** 530 Internal JVM error.
** 531 Flash memory has been exhausted.
** 532 A JVM assertion has been violated. This error can occur only in the
simulator, not on an actual handheld.
>>>REQUIRED TOOLS FOR RELOADING BLACKBERRY PHONES<<<
1. BlackBerry Desktop Manager (it is used for updating/upgrading and backup on
BlackBerry phones)
25
2. BBSAK (it is used for wiping BlackBerry phone before reloading)
>>SCREENSHOT OF BLACKBERRY DESKTOP MANAGER SOFTWARE<<<
26
>>SCREENSHOT OF BBSAK SOFTWARE<<<
>>>HOW TO RELOAD BLACKBERRY PHONES WITH ANY ERROR<<<
Step 1: Download and install “BBSAK” from my website
www.felicityglobal.com.ng . It used for wiping BlackBerry with errors.
Step 2: Connect your BlackBerry to your laptop with a USB Cable.
Step 3: Double click on “BBSAK” and type in the BlackBerry password if it is locked
but if it is not locked, simply click on “OK” button on the “BBSAK”
Step 4: Wait for the “BBSAK” to recognize the BlackBerry through the USB Cable.
Step 5: Now click on “WIPE” and wait until the “BBSAK” displays “WIPE
COMPLETED”
Step 6: Wait for the phone to reboot on white error reload screen.
Step 7: Download and install the latest “BlackBerry Desktop Manager” software
from blackberry website on www.blackberry.com
27
Step 8: Download and install latest “BlackBerry OS (Operating System)” from
https://swdownloads.blackberry.com/Downloads/entry.do?code=577BCC914F9E
55D5E4E4F82F9F00E7D4 when the site loads, select the BlackBerry model from
the drop
op down column and click on download.
Step 9: Install the downloaded BlackBerry OS.
Step 10: Open “my Computer” on your desktop > Local Disk> Program Files >
Common Files > Research in Motion > AppLoader > then delete “Vendor” > now
double click on “Loader” and follow the on
on-screen command while the BlackBerry
phone is still plugged to your laptop
laptop.
>>>SCREEN
SCREEN SHOT OF RELOADING BLACKBERRY<<<
28
29
30
Select/tick/mark the Applications that you will like to install on the BlackBerry by
scrolling down and then click on “Next”
31
32
33
34
>>>HOW TO FACTORY RESET/MANUAL FLASHES A BLACKBERRY
PHONE<<<
You can Factory Reset a BlackBerry phone from the inside while the phone is
“ON” but remember to backup the phone using your “BlackBerry Desktop
Manager” before factory resetting
resetting. Note that BlackBerry has no combination key
for Hard Resetting like Nokia phones. But you can press and hold down “Alt + Del
+ Space bar” keys to restart a BlackBerry phone without removing the battery.
Step 1: Press “MENU” key on the BlackBerry phone.
Step 2: Scroll and locate “Settings
ettings or Options” icon on the screen.
Step 3: Scroll to “Security Option” and click to open.
35
Step 4: Scroll to “Security Wipe” and click to open
Step 5: Now follow the on-screen command to “Factory Reset” the BlackBerry
phone.
Step 6: Then after, the phone will reboot.
Step 7: You are done.
>>>HOW TO REMOVE “IT POLICY” ON BLACKBERRY PHONES<<<
An “IT Policy” consists of a set of rules that define BlackBerry smartphone
security, settings for synchronizing data over the wireless network, and other
behaviors. For example, if your workplace does not permit cameras, BBM, etc, the
BlackBerry smartphone administrator may optionally disable the ability to use the
Camera or BBM feature on your smartphone. A very common example of an IT
Policy is the requirement to have a password set to unlock your BlackBerry
smartphone.
To remove IT POLICY from your BlackBerry,
Step 1: Download and install “CrackUtil” from my website
www.felicityglobal.com.ng
(It is used for deactivating/removing IT POLICY of any BlackBerry phone)
Step 2: Run as an administrator by right clicking on the “CrackUtil”
your desktop.
on
Step 3: When it opens, click on “Clearing Settings – ADVANCED”
Step 5: Click on “Reset IT” and then type ResetITPolicy inside the small pop-up
window
Step 6: Now your BlackBerry will restart. Wait for some minutes for the ClackUtil
to finish the work.
Step 7: The BlackBerry will finally reboot.
36
Step 6: You are done.
>>>SCREEN
SCREEN SHOT OF CRACKUTIL SOFTWARE
SOFTWARE<<<
37
>>>HOW
HOW TO FLASH SAMSUNG PHONES
PHONES<<<
To successfully flash a Samsung phone, you need a UFX MICRO Box.
38
You will need to first install the UFS Micro (also known as HWK) setup which you
can get it easily from any website mobile phone tools store or from websites like
www.ipmart.com. You can also download it from www.smart
www.smart-gsm.net/support.
gsm.net/support.
Flashing Steps:
Step 1: Double click on the SAMs icon on the desktop.
Step 2: Now click on the connect button. This will connect the software to the
UFS box. You will see a small window with options ‘Yes’ and ‘cancel’. Click on
cancel.
39
Step 3: Now select the model of the mobile phone which you have to flash.
The mobile phones of Samsung are divided into 6 main groups.
You will to search your model in all the 6 groups which are One-C,
C, Trident, M46,
Swift, Sky/Inf, Qc/Bc. The models of One
One-C
C and M46 are outdated. So don’t search
your handset
dset model in them!
After selecting the model of the mobile phone, you will have to connect the
phone to the computer with its flashing cable or the USB cable.
Now you will have to locate and give all the flash files required. It is very easy to
give them.
You can download Samsung’s firmware from www.tsar3000.com
40
Now click on the ‘write flash’ button. Now remove the battery and reinsert it and
press the power button.
The phone should get detected and flash
flashing
ing should start. Please keep in mind that
your battery should be charged enough to last till flashing complete! It may take
10 to 30 minutes to complete.
When you see the message ““flashing done” in the window, you can now remove
the handset.
Note: Please keep in mind that flashing will erase all the data stored inside the
phone memory. So please make a backup of all the essential data before
flashing.
>>>HOW
HOW TO REMOVE PATTERN LOCK FROM ALL ANDROID
PHONES<<<
“Pattern Lock” is a security lock setup on android phones. It is used to safe guard
phone against unauthorized use. The pattern is drawn on the scre
screen
en when you
41
want to unlock but in a case whereby you forgot the pattern and keeps trying to
unlock it for a specified period, the android phone will be locked temporally and
need to be unlocked using your “Google Account”.
With this tutorial/guide, you can be able to remove “Pattern Lock” from all
android phones like Samsung Android, LG Android, Tecno Android, HTC, etc.
Step 1: Observe the android phone to see if it has *Volume + and – key by the
side, *Home key, and *power button.
Step 2: Press and hold down the following buttons
*Volume (-) button or Volume (+) button depending on the android phone model.
*Home button.
*Power button.
Simultaneously until the phone boots up to “Recovery Mode”
Step 3: From the “Recovery Mode”, select “Wipe Data” using the volume buttons
“up and down” and then press the power button to wipe. Select “YES” when
prompted.
42
Note that this will wipe off all your data stored on the phone. But after the
wiping, the Pattern Lock will be removed.
COPYRIGHT AGREEMENT
No part of this GUIDE should be edited or redistributed without legal permission
from the author (Aniagba Arinze).
Kindly visit www.felicityglobal.com.ng for more profitable business e-books.
For more information, visit www.felicityglobal.com.ng
If you have any contributions, send us mail at [email protected]
Please for your testimonies, forward it to [email protected] and
your testimony will be posted on the site instantly.
You can also join us on FACEBOOK or TWITTER.
Facebook = www.facebook.com/felicityglobalnigeria
Twitter = @felicity_global
43

Download Report