KERALA MEDICAL SERVICES CORPORATION LTD., (Dept. of Health & Family Welfare, Govt. of Kerala) Thycaud P.O., Thiruvananthapuram-14 Ph : 0471-3045600 Tele Fax No : 0471-3045647 Web: www.kmscl.kerala.gov.in Email [email protected] RATE CONTRACT DETAILS Equipment Name Rate Contract Valid till Infusion Pump 01-04-2015 Tender Ref No KMSCL/EP/T33/310(62)/2013 Supplier Name M/s Trivitron Healthcare Pvt Ltd Manufacturer Trivitron Model Intrafuse 1200 Unit cost (`) 27,000.00 Tax @5% (`) Unit rate with tax (`) 1350.00 28,350.00 Service charges @7% (`) 1,984.50/- (Applicable for purchase through KMSCL only) Total cost (`) 30,334.50 Installation and delivery Period 4 weeks Up-time/ Preventive Maintenance visits 95% / 2 times in a year Warranty period 3 years Supplier Details Address Trivitron Health Care (P) Ltd, 3rd Floor, North Square Building, Opposite Town Hall, Paramara Road, Eranakulam North,Cochin 18 or/15, 4th Street, Abhirampuram, Chennai-18 Contact Details Office 0484-2396433 044-24985050 Contact Person 1 Mr Manoj Srambickal Gokulnath Mobile No: 8129803586 09746524060 Email ID [email protected] Annual Maintenance Charges (Inclusive of tax) Rates* (`) (for one unit) Fourth Year Fifth Year Sixth Year Seventh Year Eighth Year Labour Only AMC 540.00 581.00 624.00 671.00 721.00 Comprehensive AMC 1350.00 1451.00 1560.00 1677.00 1803.00 Other terms and conditions The supplier may execute an agreement as per the tender format with the purchaser. The supplier may submit a performance security of 10% of the value of the supply order (exclusive of tax). The Labor and Comprehensive charges of the equipment after completion of warranty period is finalized by KMSCL as above Rate Contract Details & Technical Specifications – Infusion Pump Page 1 of 2 Technical Specifications Infusion Pump 1. Should be operated on drip rate Peristaltic finger pump method. 2. Should compatible with most of the IV set (macro/micro drip sets). 3. Should have the following flow rates. IV Set ml/hr drops/min i. 15 drops/ml 3~450ml/hr 1~100drops/min ii. 20drops/ml 3~450ml/hr 1~100drops/min iii. 60drops/ml 1~100ml/hr 1~100drops/min 4. Should have a flow rate accuracy of ±10% and drip rate accuracy of ±2%. 5. Should have a volume infused display from 0 to 999.9ml. 6. Should have a purge and KVO facility. 7. Should have a audible and visual alarm for occlusion pressure, air alarm, door open, empty, low battery. 8. Should have a LED/LCD display with backlight and graphical display of infusion 9. Should have a minimum 2hr battery back up at highest delivery rate. 10. Should work with input 200 to 240Vac 50 Hz supply. 11. Should have safety certificate from a competent authority CE / FDA (US) /STQC CB certificate / STQC S certificate or valid detailed electrical and functional safety test report from ERTL. Copy of the certificate / test report shall be produced along with the technical bid Rate Contract Details & Technical Specifications – Infusion Pump Page 2 of 2
© Copyright 2024 ExpyDoc