HBDS-8100/MDDS-8100 Satellite Distribution Hub 12382 south

I
N S T A L L A T I O N
G
U I D E
HBDS-8100/MDDS-8100
Satellite Distribution Hub
12382 south gateway park place, 700, draper, utah 84020
1.801.617.3100
www.futuresmart.com
FutureSmart
Satellite Distribution Hub Installation Guide
Description
The DBS Distribution Hub distributes digital signals from a dual LNB system and/or a dual LNB
from a Multi-Satellite System to up to eight separate receivers.
The HBDS-8100 occupies one expansion slot in any SuperPro, HotWire Series Panel.
The MDDS-8100 occupies 12” of both sides of a install can.
Features
•
Distribute a dual feed satellite system
to 8 receivers
•
Distribute a four feed satellite system
(Multi-Satellite System) to 8 receivers
•
Compatibility
Table
Dual LNB
Yes
Dish
Network
Yes
**Multi-Satellite
Yes
No (Dish 500)
Single LNB
No
No
DirecTV
Will distribute Antenna or Cable TV to all the 8 outputs
(using optional diplexer)
**Multi-Satellite System has either 2-Dual LNB dishes
pointed at different satellites or a single elliptical dish
with multiple horns pointed at more than one satellite.
Specifications
Input Frequency Range:
950-2150 MHz
(LNB A / LNB B)
54-806 MHz
(UHF / VHF)
Output Frequency Range:
54-2150 MHz
(Each Output)
Insertion Loss:
-3dB
54-806MHz
2dB
950-2150
Noise Figure:
4.8dB
Cross Polar Isolation
30dB
Current Consumption:
60mA
Power Adaptor:
120VAC 60Hz Input
24VDC 1000mA Output
1
4
Front View
Installation
DBS DISTRIBUTION HUB
1. Eight Receiver Outputs
HBDS-8100
2. Antenna/Cable TV input
REC 1
REC 2
REC 3
REC 4
REC 5
REC 6
REC 7
REC 8
3. Four LNB inputs
ANT
IN
4. 24VDC Power input
LNB B
13DC/22KHz
LNB B
13DC/0KHz
LNB A
18DC/0KHz
LNB A
18DC/22KHz
2
3
1
4
2
Back View
3
2
Power IN
24VDC
FutureSmart
Satellite Distribution Hub Installation Guide
UHF/VHF
Antenna
Power Supply
120VAC
Installation for a standard
Dual LNB system.
Dual LNB
dish
1.The dual feeds from the satellite dish
needs to hook up the port 1 and 2 on
the DBS distribution hub only (13vdc
0KHz 18vdc 0KHz).
Optional
2. If there is no UHF/VHF antenna
present in the system the diplexers are
not needed between the distribution
hub and the receivers.
Power
24VDC
LNB/A
18VDC/
22KHz
LNB/A
18VDC/
0KHz
4
3. Power is required to make hub
function properly. Use the transformer
with the coax connector and an RG6
patch cord in hook power to the DBS
distribution hub.
2
1
3
Diplexer
Diplexer
Receiver
Receiver
Diplexer
1
4
LNB/B
13VDC/
22KHz
LNB/B
13VDC/
0KHz
3
2
5
6
ANT IN
8
7
Diplexer
Diplexer
Diplexer
Receiver
Receiver
Receiver
Diplexer
Diplexer
Receiver
Receiver
Receiver
UHF/VHF
Antenna
Multi
satellite
dish
Power Supply
120VAC
Installation for a Multi
Satellite system.
1.The dual feeds from the satellite
dish needs to hook up the port 1 and
2 on the DBS distribution hub only
(101° SAT 13vdc 0KHz 18vdc
0KHz). The dual feed from the
HDTV satellite dish needs hook up to
ports 3 and 4 on the DBS distribution
hub
(119° Sat 13vdc 22 KHz 18vdc 22
KHz).
Optional
Power
24VDC
LNB/A
18VDC/
22KHz
LNB/A
18VDC/
0KHz
4
2
1
Diplexer
Receiver
3
Diplexer
Receiver
Diplexer
1
4
LNB/B
13VDC/
22KHz
LNB/B
13VDC/
0KHz
3
2
5
6
ANT IN
7
2. If there no UHF/VHF antenna
present in the system the diplexers
are not needed between the
distribution hub and the receivers.
8
Diplexer
Diplexer
Diplexer
Receiver
Receiver
Receiver
Diplexer
Diplexer
Receiver
Receiver
Receiver
3
3. Power is required to make hub
function properly. Use the
transformer with the coax connector
and a RG6 patch cord in hook power
to the DBS distribution hub.

Download Report