Floor Sink Floor and Area Drain PD_Reviewed MEE

SUBMITTAL REVIEW FOR
Powers Skilled Nursing
ME Project Number: DV12118
Specification Sections:
22 40 00
Submittal Number: 224000-03
Mechanical Submittal Data
Review Date: 03/13/14
(Received by M-E Engineers, Inc. 03/11/14)
Subcontractor:
Harmon Bonded
NOTE:
Checking is only for general conformance with the design concept of the project and general compliance with the
information given in the contract documents. Any action shown is subject to the requirements of the plans and
specifications. Contractor is responsible for: dimensions which shall be confirmed and correlated at the job site;
Fabrication processes and techniques of construction; coordination of his work with that of all other trades and the
satisfactory performance of his work.
If the use of any equipment or item in this submittal requires any deviation from the contract documents, or if there is
a need to provide access or space due to dimensional constraints, the contractor shall provide a shop drawing for
review showing how this item can be accommodated and shall be responsible for any deviations in related work due
to its use.
Unless noted otherwise, the contractor is still responsible for performing in accordance with the contract documents.
The following items have been reviewed for conformance with the requirements of the Contract Documents:
DISPOSITION
Item and Review Comments
Note: Items in ( ) Represent Item Tags from Equipment Schedule
General Notes (All Products):
• Architect to approve grate finish.
(FS-1) JR Smith 3420Y
• Provide grate per plumbing fixture schedule.
(FD-1) JR Smith 2005Y w/ Trap Primer Connection, Vandal Proof Screws,
Chrome Plated Grate
(FD-2) JR Smith 2210Y w/ Trap Primer Connection
(AD-1) JR Smith 1459Y w/ Vandal Proof Grate
N
M
X
X
X
X
X
M-E ENGINEERS, INC.
Denver Office
Megan O’Sullivan
Mechanical Project Engineer
Disposition Code:
N – No exception taken. Resubmittal not required.
M – Make corrections noted. Resubmittal not required if installation complies with notes.
J – Rejected
R – Revise and Resubmit
S – Submit Specified Item
J
R
S
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
Submittal Stamp Sheet
Project:
Powers SNF
Phipps’ Job #: 13J2022
Submittal #: 224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
Gerald H. Phipps, Inc.:
Architect:
SUBMITTED
GH Phipps
Construction Companies
GH Phipps has reviewed, approved, and
herby submits the attached in accordance
with the contract documents.
Note to Subcontractor/Material Supplier:
Subcontractor/Material Supplier remains
responsible for the confirmation and
correlation of dimensions at the jobsite;
fabrication processes and construction
techniques; coordination of the work with
the work of other trades; and satisfactory
performance of the work.
Engineer:
Other:
NOTES:
Signed:
Nate Casten
H+L Architecture
1755 Blake St.
Denver, CO 80202
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
PLUMBING & HEATING, INC.
Section 224000
SECTION TABLE OF CONTENTS
TAB #
1
2
3
Submittal Data
2.08.A - FLOOR SINK
2.09.A - FLOOR DRAINS
AREA DRAINS
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
TAB 1
FS-1
DIVISION OF SMITH INDUSTRIES, INC.
A
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
S3420
G
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
A.R. COATED NON-TRAFFIC TOPS
12" (305) SQUARE TOP - MEDIUM, DEEP, EXTRA DEEP RECEPTORS
FUNCTION: Used in kitchens, hospitals, food markets, restaurants, schools and all types of food handling areas not subject
to foot or other traffic. The deeper receptors are particularly useful for indirect waste applications or for handling a large
volume of waste water.
Free Area
14 (355) SQ
14 (355) SQ
40 SQ IN
(258) SQ CM
12 (305) SQ
12 (305) SQ
Seepage Holes
2 (51)
Seepage Holes
2 (51)
6 (150), 8(205)
or 10 (255)
6 (150), 8 (205)
or 10 (255)
3 (76)
3 (76)
A
WITH DOME BOTTOM STRAINER
6" (150) deep
Fig. . . .
3420C . . .
Fig. . . . ✔ 3420Y . . .
8" (205) deep
3430C . . .
3430Y . . .
A
WITH SEDIMENT BUCKET
A (Pipe Size) = 02(50), 03(75) or 04(100)
10" (255) deep
3440C . . . CAULK OUTLET . . . Fig. . . .
3440Y . . . NO-HUB OUTLET . . . Fig. . . .
6" (150) deep
3421C . . .
3421Y . . .
8" (205) deep 10" (255) deep
3431C . . .
3441C
3431Y . . .
3441Y
FEATURES, OPTIONS & ORDERING INFORMATION
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
DRAWING NUMBER
SIZE
SCALE:
NONE
9-19-85
DATE:
MEMBER OF:
SANI-CEPTOR® ACID RESISTANT COATED
FLOOR & INDIRECT WASTE DRAINS
JD
APPROVED BY:
CHECKED BY:
JD
CM
DRAWN BY:
3420-3441 Series
FIGURE
NUMBER
®
P
ASPE
NITARY
SA
®
EN e
r
CUSTOMER
DRIVEN
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
G
SMITH MFG. CO.
LOCATION
®
re
SMITH ® JAY R.
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
REGULARLY FURNISHED: Cast Iron Flanged Receptor with Seepage Holes, Acid Resistant Coated Interior, and Loose
Set Acid Resistant Coated Cast Iron Grate. Aluminum Dome Bottom Strainer or Sediment Bucket as Indicated by Figure
Number.
OPTIONAL MATERIALS:
VARIATIONS:
All Duco Cast Iron Receptor and Grate -CI
Aluminum Flat Bottom Strainer -FBS
All Galvanized Receptor and Grate -G
Flashing Clamp -C
Less Flange (Specify Fig. 3425, 3426, 3435, 3436, 3445, 3446)
NOTE: This grate is not recommended for
Polished Aluminum Dome Bottom Strainer -PDBS
any type of traffic including pedestrian traffic.
L Speedi-Set Service Weight
NOTE: Dimensions shown in
parentheses are in millimeters.
LXH Speedi-Set Extra Heavy
OPTIONAL TOP GRATES AND COVERS FOR INDIRECT WASTE APPLICATIONS
SUFFIX
DESCRIPTION
NUMBER
-10 . . . . . . . . . . Less A.R.C. Grate
-12 . . . . . . . . . . With A.R.C. 1/2 Grate
-13 . . . . . . . . . . With A.R.C. 3/4 Grate
-14 . . . . . . . . . . With A.R.C. Grate with 2 1/2" (64) DIA Center Hole
-15 . . . . . . . . . . With NB Rim and Aluminum Recessed Grate
-21 . . . . . . . . . . With A.R.C. Grate and 4" (100) DIA A.R.C. Funnel
-22 . . . . . . . . . . With A.R.C. Grate and 6" (150) DIA A.R.C. Funnel
-25 . . . . . . . . . . With A.R.C. Grate and 8 1/4(210) x 3 1/4(83) x 4 1/2"(115) High Oval A.R.C. Funnel
-26 . . . . . . . . . . With A.R.C. Grate and 6(150) x 2 1/2(64) x 1"(25) High Oval A.R.C. Funnel
-41 . . . . . . . . . . With A.R.C. Solid Cover
-42 . . . . . . . . . . With A.R.C. 1/2 Solid Cover
-43 . . . . . . . . . . With A.R.C. 3/4 Solid Cover
-44 . . . . . . . . . . With A.R.C. Solid Cover with 2 1/2" (64) DIA Center Hole
H
G
F
E
REV.
6-9-08
12-3-98
8-26-96
4-8-96
DATE
Revised Free Area
Added Note
Rev Opt Mat
Rev Rim Description
DESCRIPTION
RN
CMD
EMB
EMB
CL
CL
BS
BS
BY
CKD. BY
WEIGHT
POUNDS
VOLUME
CUBIC FEET
FIGURE NUMBER
3420-3441
Series
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
TAB 2
FD-1
A
NONE
5-17-85
FLOOR OR SHOWER DRAINS
FUNCTION: General service floor drain for use in showers, toilets, kitchens and other finished areas where foot traffic is expected.
The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are
finished in material of square or straight line pattern. Reversible flashing collar permits adjustment of the strainer to meet finished
floor level.
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
TD
G
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
MEMBER OF:
WITH ADJUSTABLE STRAINER HEADS
S2005
DRAWING NUMBER
9 (230) DIA
Low
Position
High
Position
B DIA or SQ
X-MIN
MAX
XX-MIN
MAX
TD
PJ
2005
9 (230) DIA
Low
Position
High
Position
B DIA or SQ
X-MIN
MAX
XX-MIN
MAX
▼ 2 5/8"(67)
1 1/4 (32)
4(100)
1 1/4 (32)
Trap Primer
Connection
(When Specified)
**6 3/4 (170)
4(100)
Trap Primer
Connection
(When Specified)
Seepage
Openings
A
A
Seepage
Openings
**6 3/4 (170)
A (Pipe Size) = 02(50), 03(75), 04(100), 05(125) or 06(150)
SPEEDI-SET OUTLET
NO-HUB OUTLET
Fig. 2005Y……(A) ROUND TOP
✔ Fig. 2005Y.……(B) SQUARE TOP
Fig. 2005L……(A) ROUND TOP
Fig. 2005L……(B) SQUARE TOP
Outlet
Size
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
SIZE
SCALE:
DATE:
APPROVED BY:
CHECKED BY:
DRAWN BY:
FIGURE
NUMBER
®
NITARY
SA
®
P
ASPE
EN e
r
CUSTOMER
DRIVEN
MEMBER OF ACORN’S FAMILY OF COMPANIES
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
Q
SMITH MFG. CO.
LOCATION
®
re
SMITH ® JAY R.
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
Nickel Bronze
Strainer Head
▲ 02(50) 05(125) DIA or SQ
▲ 03(75) 06(150) DIA or SQ
▲ 04(100) 08(205) DIA or SQ
✔
▼ This dimension to internal stop of speedi-set gasket.
• Add 3/8"(10) to all min/max dimensions for round strainers.
* Collar is reversible to obtain extreme high and low strainer
positions.
•• Not available for 5"(125) size strainer.
** MIN 6 3/4"(170) hole required for core drilled application.
REGULARLY FURNISHED:
Duco Cast Iron Body with Flashing
Collar and Adjustable Strainer Head
as Indicated by Suffix Letter Selected.
NOTE: Dimensions shown in
parentheses are in millimeters.
▲ Meets ASME Standard A112.6.3-2001
Strainer
Size
B
DIA or SQ
05 (125)
06 (150)
07 (180)
08 (205)
•09 (230)
•10 (255)
VARIATIONS:
Flapper Type Backwater Valve -V
••
Hinged Grate -H
L Speedi-Set Service Weight
2(50), 3(75) & 4"(100) only
LXH Speedi-Set Extra Heavy
2(50), 3(75) & 4"(100) only
Sediment Bucket -B
✔ Trap Primer Connection -P050
1/2" (13) & -P075 3/4" (19)
✔ Vandal Proof Screws -U
Wide Flanged Strainer (Specify
Fig. DX2005)
T Threaded Outlet
Heelproof Grate -HP
-AHP (Round) or -BHP (Square)
*Collar
In High
Position
X
MIN
MAX
1 1/4(32)
1 1/4(32)
1 1/4(32)
1 1/2(38)
1 1/2(38)
1 1/2(38)
2 1/4(57) 3/4(19)
2 1/4(57) 3/4(19)
2 1/4(57) 7/8(22)
2 1/2(64) 1(25)
2 3/8(60) 1(25)
2 3/8(60) 1(25)
11-18-11
11-20-09
12/18/08
10/24/06
REV.
DATE
Rev. Dwg., Var.
Revised Variations
Addition to Variations
NO-HUB to SPEEDI-SET
DESCRIPTION
1 5/8(41)
1 5/8(41)
1 7/8(48)
1 7/8(48)
1 7/8(48)
1 7/8(48)
7(45)
9(58)
14(90)
17(110)
18(116)
23(48)
6.5(42)
12.5(81)
11(71)
14(90)
16(103)
16(103)
OPTIONAL MATERIALS:
Bronze Body -BB
Chrome Plated Strainer -CP
Galvanized Cast Iron Body -G
✔ Nickel Bronze Strainer -NB
Polished Bronze Strainer -PB
Stainless Steel (Specify Fig. 9700-A)
02(50), 03(75) or 04"(100) sizes only.
Q
P
N
M
*Collar
Free Area
In Low
SQ IN
Position
(SQ CM)
XX
MIN
MAX ROUND SQUARE
SEE PM0457 FOR
OPTIONAL STRAINER HEADS.
TBW
RN
JJ
RN
CR
BW
BW
CL
BY
CKD. BY
WEIGHT
POUNDS
VOLUME
CUBIC FEET
FIGURE NUMBER
2005
FD-1
PM0457 SH 1 of 2
G
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
FLAPPER TYPE BACKWATER VALVE
ROUND STRAINER
ASSUME NO RESPONSIBILIT OR USE OF SUPERSEDED OR VOID DATA
B
H
B DIA 05 (125)
H
2 (51)
MIN 1 1/4 (32)
X MAX 2 1/4 (57)
VARIATIONS:
MATERIALS:
Chrome Plated -CP *Hinged Grate (Specify
Suffix -AH)
Polished Bronze -PB
Sediment Bucket -B
Nickel Bronze -NB
Vandal Proof Screws -U
06 (150)
2 (51)
1 1/4 (32)
2 1/4 (57)
07 (180)
2 1/4 (57)
1 1/4 (32)
2 1/4 (57)
08 (205)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
09 (230)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
SUFFIX -A
MATERIALS:
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
H
B DIA 05 (125)
H
2 (51)
MIN 1 1/4 (32)
X
MAX 2 1/4 (57)
06 (150)
2 (51)
1 1/4 (32)
2 1/4 (57)
07 (180)
2 1/4 (57)
1 1/4 (32)
2 1/4 (57)
B DIA 05 (125)
H
2 (51)
X MIN 1 1/4 (32)
MAX 2 1/4 (57)
10 (255)
2 3/4 (70)
1 1/2 (38)
2 3/4 (70)
FIGURE
NUMBER
SUFFIX -C
06 (150)
2 (51)
1 1/4 (32)
2 1/4 (57)
Flapper Type Backwater Valve
(Specify Suffix -BV) 05 (125),
06 (150), 07 (180) or 08" (205)
sizes only
*Hinged Grate (Specify Suffix -BH)
Sediment Bucket -B
Vandal Proof Screws -U
08 (205)
09 (230)
2 1/2 (64) 2 1/4 (57)
1 1/2 (38) 1 1/2 (38)
2 1/2 (64) 2 1/4 (57)
08 (205)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
MATERIALS:
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
6
6 (150)
3 1/8(79)
3 1/8
10 (255)
2 1/4 (57)
1 1/2 (38)
2 3/8 (60)
REINFORCED TRACTOR STRAINER
FUNCTION: Used in finished floors where medium weight wheeled loads are
anticipated and loose set non-tilt tractor grate is desired.
VARIATIONS:
Flapper Type Backwater
Valve (Specify Suffix -CV)
Sediment Bucket -B
Vandal Proof Screws -U
MATERIALS:
Cast Iron -CI
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
B
H
SUFFIX
10 (255)
2 3/4 (70)
1 7/8 (48)
2 3/4 (70)
-D
-E
Specify Type, Size & Finish eg: C06NB
FUNCTION: Used in a non-traffic area when a funnel type strainer head
is required and space does not allow use of the 3500 series funnel. The
extended rim allows use as an anti-flood and anti-splash drip pan.
VARIATIONS:
Flapper Type Backwater
Valve (Specify Suffix
-F37V or F38V)
B
H
REV.
DATE
Specify Type, Size & Finish eg: F06NB
Revised Suffix-BS
Revised
Revised Tables
Added Nickel Bronze
DESCRIPTION
NOTE: Dimensions shown in parenthesis are in millimeters.
X
B
H
DIA
MIN
MAX
07 (180) 3 1/4 (83) 2 5/8 (67) 3 1/2 (89)
09 (230) 3 1/2 (89) 2 3/4 (70) 3 1/2 (89)
ADJUSTABLE STRAINER HEAD
MIN
MAX
1 1/4 (32) 2 1/8 (54)
10-4-01
8-24-99
6-11-99
11-4-97
VARIATIONS:
Flapper Type Backwater
Valve (Specify Suffix -DV
or -EV)
Sediment Bucket -B
Vandal Proof Screws -U
Specify Type, Size & Finish eg: D09PB
E09PB
SUFFIX -D-E
FUNCTION: Provides integral flange set 5/32" (4) below rim to receive floor
covering. Flange may have option of tapped holes for securing pan and
gasket.
MATERIALS:
VARIATIONS:
Chrome Plated -CP Flapper Type Backwater
7 1/27 1/2
(190)
Polished Bronze -PB Valve (Specify Suffix
6
6 (150)
5/32
-FV)
5/32 (4) Nickel Bronze -NB
Holes in Flange -SH
Sediment Bucket -B
2
2
(51)
Vandal Proof Screws -U
X
G
E
F
E
VARIATIONS:
Gasketed Water Tight
Cover -GC
Secured Cover -SC
Secondary Strainer
Grate-SG
Specify Type, Size & Finish
eg: BSNB
SUFFIX -BS
TILE FLANGE
SUFFIX -F
08 (205)
2 1/2 (64)
1 1/2 (38)
2 1/2 (64)
VARIATIONS:
MATERIALS:
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
B DIA 05 (125)
H
2 (51)
MIN 1 1/4 (32)
MAX 2 1/4 (57)
07 (180)
2 1/4 (57)
1 1/4 (32)
2 1/4 (57)
STRAINER HEAD w/SQUARE HINGED COVER
FUNCTION: Used in finished floors where light wheeled loads are
anticipated.
H
06 (150)
2 (51)
1 1/4 (32)
2 1/4 (57)
VARIATIONS
Grate (Specify
Suffix -AH)
Vandal Proof Screws -U
* Hinged
Specify Type, Size & Finish eg: AV05NB
*Not available for 05" (125) size
SUFFIX -AV
Specify Type, Size & Finish eg: B05NB
*Not available for 05" (125) size
B
MATERIALS:
Chrome Plated -CP
Polished Bronze -PB
Nickel Bronze -NB
H
SQUARE STRAINER
B
FUNCTION: Provides backwater protection at point where protection is needed.
B
Specify Type, Size & Finish eg: A05NB
*Not available for 05" (125) size
SUFFIX -B
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
DRAWING NUMBER
A
SIZE
NONE
SCALE
5-17-85
DATE:
APPROVED BY:
MEMBER OF:
OPTIONAL STRAINER HEADS
TD
TD
PJ
CHECKED BY:
®
REINFORCED ROUND STRAINER
2010 SERIES OPTIONAL
STRAINER HEADS
DRAWN BY:
ASPE
P
CUSTOMER
DRIVEN
NITARY
SA
®
EN e
r
MEMBER OF ACORN’S FAMILY OF COMPANIES
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
G
SMITH MFG. CO.
LOCATION
®
re
SMITH ® JAY R.
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
SUFFIX -F37-F38
RN
TBW
CMD
EMB
CL
BY
CKD. BY
BS
BS
SUFFIX
B DIA
H
MIN
X MAX
-F37
07 (180)
3 1/4 (83)
2 5/8 (67)
3 1/2 (89)
-F38
09 (230)
3 1/2 (89)
2 3/4 (70)
3 1/2 (89)
MATERIALS:
Cast Iron -CI
Chrome Plated -CP
Galvanized Cast Iron -G
Polished Bronze -PB
Nickel Bronze -NB
Specify Type, Size & Finish eg: F37NB F38CP
FIGURE NUMBER
2010 SERIES OPTIONAL
STRAINER HEADS
1 0f 2
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
FD-2
NITARY
SA
®
®
MEMBER OF:
SINCE 1926
G
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
P
ASPE
MEMBER OF MORRIS GROUP INTERNATIONAL
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
EN e
r
CUSTOMER
DRIVEN
LOCATION
G
E
SMITH MFG. CO.
®
re
SMITH ® JAY R.
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
S2210
NONE
5-17-85
FUNCTION: For general medium duty use where waste water contains solids or debris that must be prevented from
entering drainage lines. "Safe-Set" design insures bucket replacement after cleaning, since top grate cannot be inserted
unless bucket is in place.
Free Area
9.25 SQ IN
(60) SQ CM
8 1/2 (215) DIA
8 (205) DIA
6 1/2 (165) DIA
∆B
8 1/2 (215) DIA
Auxiliary Drainage
Openings
8 (205) DIA
6 1/2 (165) DIA
2 1/2" (64) Deep Slotted
Sediment Bucket
*3 3/4
(95)
∆B
∆ 6 1/2
A
(165)
A
4 3/4 (120)
Fig. 2210C. . . . CAULK OUTLET
Fig. 2210Y. . . . NO-HUB OUTLET
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
DATE:
APPROVED BY:
"SAFE-SET" BUCKET
TD
TD
CHECKED BY:
FIGURE
NUMBER
2210, 2215
DRAWN BY:
WITH 8 1/2" (215) ROUND TOPS AND SEDIMENT BUCKETS
5 1/2 (140)
CMB
SCALE:
A
SIZE
DRAWING NUMBER
FLOOR DRAINS
02
(50)
A SIZE
B
03
(80)
04
(100)
5 (125) for Caulk, NO-HUB
and Speedi-Set
3 1/2 (89) for Threaded
REGULARLY FURNISHED:
Duco Cast Iron Body with Cast Iron Grate
and Sediment Bucket.
E
D
C
B
REV.
4-8-97
7-1-94
9-1-93
11-25-91
DATE
Added Millimeters
Revised
Submittal Update
Rev. Callouts & Var.
DESCRIPTION
Fig. 2215C. . . . CAULK OUTLET
Fig. 2215T. . . . THREADED OUTLET
*This Dimension to Internal Stop of
Speedi-Set Gasket.
A
02 (50) 03 (80) 04 (100)
SIZE
∆ Add 1/4" (6) when bronze top is specified.
B
Dome Grate -D
Hinged Grate -H
L Speedi-Set Service Weight
(Fig. 2210 only)
LXH Speedi-Set Extra Heavy
(Fig. 2210 only)
NO-HUB Adaptor (Specify
Fig. 2646Y) (Fig. 2215 only)
Square Top -S
Trap Primer Connection -P050
1/2" (13) & -P075 3/4" (19)
Vandal Proof Grate -U
Wide Flange Deck Drain (Specify
Fig. DX2565)
T Threaded Outlet
BY
4 1/4
(110)
3 3/4
(95)
OPTIONAL MATERIALS:
VARIATIONS:
EMB
CMB
EMB
TWK
4 3/4
(120)
BS
BS
BS
BS
CKD. BY
WEIGHT
POUNDS
Ductile Iron Bucket and Grate -MGB
Galvanized Cast Iron -G
Nickel Bronze Top -NB
Polished Bronze Top -PB
NOTE: Dimensions shown in
parentheses are in millimeters.
VOLUME
CUBIC FEET
FIGURE NUMBER
2210, 2215
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
TAB 3
224000-03 - Plumbing Fixtures - Floor Sink, Floor and Area Drain PD
AD-1
DIVISION OF SMITH INDUSTRIES, INC.
®
MEMBER OF:
G
IN
I
ve
nti N E E R Cu
n
on R
ather Tha
P
ASPE
NITARY
SA
®
EN e
r
CUSTOMER
DRIVEN
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
K
SMITH MFG. CO.
LOCATION
®
re
SMITH ® JAY R.
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
S1459
NONE
2-2-82
FIGURE
NUMBER
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
DATE:
APPROVED BY:
▲ 11 (280) SQ
10 1/4 (260) SQ
▲▲
CONCRETE FILL
2 (51)
4" (100) Extension
(Unless otherwise
specified)
* INSULATION
DECK
4 3/4
(120)
6
(150)
Water Proofing
Membrane
Secondary
Flashing Clamp
Underdeck Clamp
(When Specified)
(2) Rows of 1/4 (6) DIA
Seepage Holes
A
JM
JM
CHECKED BY:
12 (305) DIA
A (Pipe Size) = 02(50),03(75),04(100),05(125) & 06(150)
1459
DRAWN BY:
FOR INSULATED ROOF DECKS
9 1/2 (240) DIA
KG
SCALE:
A
SIZE
DRAWING NUMBER
PROMENADE DECK DRAIN
✔
Fig. 1459C . . . . . CAULK OUTLET
Fig. 1459Y . . . . . NO-HUB OUTLET
recommended deck opening
with suffix -R 13 (330) DIA
less suffix -R 11 (280) DIA
Add 1/4"(6) when bronze top is specified.
Add 1/8"(3) when bronze top is specified.
REGULARLY FURNISHED:
Duco Cast Iron Body and 4" (100)
Extension with Secondary Flashing
Clamp and Seepage Openings with
Secured Square Hole Grate.
* On some systems this layer
includes a layer of pea gravel and
a layer of insulation.
K
J
H
G
F
E
REV.
7-18-00
6-16-99
1-3-97
6-7-96
7-27-95
4-15-93
DATE
✔
Revised Variations
Revised millimeters
Revised Reg. Furn. & Extension
Added Millimeters
Revised Drawing
Chg'd Dwg, Var, & Opt Mat
DESCRIPTION
VARIATIONS:
Expansion Joint (Specify Fig. 1710)
Extension (Specify Height) -E
"L" Shaped Underdeck Clamp -CL
L Speedi-Set Service Weight
02(50), 03(75) & 04"(100) sizes only
LXH Speedi-Set Extra Heavy
02(50), 03(75) & 04"(100) sizes only
NO-HUB Adaptor (Specify Fig. 2646Y)
Sump Receiver -R
Underdeck Clamp -C
Vandal Proof Grate -U
T Threaded Outlet
S.S. Perforated Extension
TBW
CMD
CMD
EMB
CMD
EMB
BY
BS
BS
BS
BS
BS
CKD. BY
WEIGHT
POUNDS
VOLUME
CUBIC FEET
✔
OPTIONAL MATERIALS:
Ductile Iron Grate -M
Galvanized Cast Iron -G
Nickel Bronze Top -NB
Polished Bronze Top -PB
NOTE: Dimensions shown in
parentheses are in millimeters.
FIGURE NUMBER
1459

Download Report