Housings

R300-L35
3" LED REMODEL HOUSING - Premium
Series
The LED housing constructed of heavy duty
galvanized steel, with an all aluminum heat sink. It
also includes a high performance 5 watt LED chip,
driver, heat sink and fully dimmable.
The mounting system allows a quick, easy and
sturdy installation, using the automatic positioning
feature. - 2 clip system Mounting clips allow for
installations in ceilings up to 1.25" (32mm) in
thickness, combined with Quick Connect wire
connectors, allows for a quick, easy and sturdy
installation.
This housing is designed to be installed directly into
batt or roll type insulation. However, in a loose-fill or
blown type insulation, an NDR vapour barrier (VP99,
90°C rated) or an insulated box (IB410) is necessary.
The LED housing may be installed with a 120V
dimmer.
Product Characteristics:
Beam spread: spot, 25 degree angle
LED life: 40,000 hours
Limited warranty: 3 years
Dimmable: yes
TRIMS FOR THIS PRODUCT
TR1485 - 3'' LED TRIM - Premium Series (TR1485)
Technical information
Color Temperature
CRI
Lumen
Output wattage
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 19
3500k
80
275
5W
3.8" (96.5 mm)
9.4" (238.8 mm)
3.2" (81.3 mm)
120V
5W LED
R300-GZ
3" GU10 REMODEL HOUSING
Housings constructed of heavy duty galvanized steel
with junction box - Built-in thermal protection
Patented adjustable mounting clips (2), allow for a
quick, easy and sturdy installation
Can be installed in ceilings up to 1.25" (32mm) in
thickness
TRIMS FOR THIS PRODUCT
TR1424 - 3" GU10 GIMBAL TRIM (TR1424)
TR1430 - 3" GU10 DIE CAST TRIM (TR1430)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 20
4" (101.6 mm)
8.75" (222.3 mm)
3" (76.2 mm)
120V
GU10, 50W
NC300-GZ
3" GU10 NEW CONSTRUCTION HOUSING
Housings constructed of heavy duty galvanized steel
with junction box, for ceilings with no insulation Built-in thermal protection
Ideal for open ceilings with no insulation - New
Construction or acoustic tiles
Adjustable mounting bars, included, allow for
installation between 13.00" (320mm) and 26.00"
(660mm) openings
Can be installed in ceilings up to 1.25" (32mm) in
thickness
Important: Recommended installation in accessible
ceilings without insulation. (ex: suspended ceilings)
TRIMS FOR THIS PRODUCT
TR1424 - 3" GU10 GIMBAL TRIM (TR1424)
TR1430 - 3" GU10 DIE CAST TRIM (TR1430)
Technical information
Height
Width
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 21
4.06" (103.1 mm)
7" (177.8 mm)
8.5" (215.9 mm)
3" (76.2 mm)
120V
GU10, 50W
R425-L35
4.25" LED REMODEL HOUSING - Premium
Series
The LED housing contructed of heavy duty
galvanized steel, with an all aluminum heat sink. It
also includes a high performance 8 watt LED chip,
driver, heat sink and fully dimmable.
The mounting system allows a quick, easy and
sturdy installation, using the automatic psitioning
feature - 2 screw system. The mounting clips allow
for installations in ceilings up to 1.25" (32mm) in
thickness, combined with Quick Connect wire
connectors, allows for a quick installation.
This housing is designed to be installed directly into
batt or roll type insulation. However, in a loose-fill or
blown type insulation, an NDR vapour barrier (VP99,
90°C rated) or an insulated box (IB410) is necessary.
The LED housing may be installed with a 120V
dimmer.
Product Characteristics:
Beam spread: flood, 110 degree angle
LED life: 40,000 hours
Limited warranty: 3 years
Dimmable: yes
TRIMS FOR THIS PRODUCT
TR1785 - 4.25'' LED TRIM - Premium Series (TR1785)
TR1790 - 4.25'' LED TRIM - Premium Series (TR1790)
Technical information
Color Temperature
CRI
Lumen
Output wattage
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 22
3500k
80
455
8W
4.48" (113.8 mm)
10.35" (262.9 mm)
4.25" (108.0 mm)
120V
8W LED
K150H-42-GZ
4.25'' GU10 REMODEL HOUSING - Premium
Series
These housings are constructed of heavy-duty steel
and a tight assembly so as to avoid noise and
vibration.
The mounting system allows a quick, easy and
sturdy installation, using the automatic positioning
feature. - 2 screw system
Mainly used for renovation or ceilings with limited
space, where no insulation is used.
Can be installed in ceilings with, up to 1.25'' (32mm)
of thickness.
Approved for damp locations, with built-in thermal
protection and "Quick Connect wire connectors
included
TRIMS FOR THIS PRODUCT
TR1625 - 4.25" GU10/MR16 SHOWER TRIM (TR1625)
TR1615 - 4.25" GU10/MR16 SHOWER TRIM (TR1615)
TR1530 - 4.25" GU10/MR16 GIMBAL TRIM (TR1530)
TR1510 - 4.25" GU10/MR16 RECESSED TRIM (TR1510)
TR1575 - 4.25" GU10/MR16 SQUARE GIMBAL TRIM
(TR1575)
TR1675 - 4.25" GU10/MR16 SQUARE SHOWER TRIM
(TR1625)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 23
4.62" (117.3 mm)
10.29" (261.4 mm)
4.25" (108.0 mm)
120V
GU10, 50W
R425-GZ
4.25" GU10 REMODEL HOUSING
Housings constructed of heavy duty galvanized steel
with junction box - Built-in thermal protection
Patented adjustable mounting clips (3) and "Quick
Connect" wire connectors, allow for a quick, easy
and sturdy installation
Can be installed in ceilings up to 1.25" (32mm) in
thickness
Approved for damp locations
TRIMS FOR THIS PRODUCT
TR1625 - 4.25" GU10/MR16 SHOWER TRIM (TR1625)
TR1615 - 4.25" GU10/MR16 SHOWER TRIM (TR1615)
TR1510 - 4.25" GU10/MR16 RECESSED TRIM (TR1510)
TR1530 - 4.25" GU10/MR16 GIMBAL TRIM (TR1530)
TR1575 - 4.25" GU10/MR16 SQUARE GIMBAL TRIM
(TR1575)
TR1675 - 4.25" GU10/MR16 SQUARE SHOWER TRIM
(TR1625)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 24
4.62" (117.3 mm)
10.29" (261.4 mm)
4.25" (108.0 mm)
120V
GU10, 50W
NC425-GZ
4.25" GU10 NEW CONSTRUCTION HOUSING
Housings constructed of heavy duty galvanized steel
with junction box - Built-in thermal protection
Ideal for open ceilings with no insulation - New
Construction or acoustic tiles
Adjustable mounting bars included, allows for
installation between 13.00" (320mm) and
26.00"(660mm) openings
"Quick Connect" wire connectors included
Can be installed in ceilings up to 1.25" (32mm) in
thickness
Approved for damp locations
TRIMS FOR THIS PRODUCT
TR1625 - 4.25" GU10/MR16 SHOWER TRIM (TR1625)
TR1615 - 4.25" GU10/MR16 SHOWER TRIM (TR1615)
TR1530 - 4.25" GU10/MR16 GIMBAL TRIM (TR1530)
TR1510 - 4.25" GU10/MR16 RECESSED TRIM (TR1510)
TR1575 - 4.25" GU10/MR16 SQUARE GIMBAL TRIM
(TR1575)
TR1675 - 4.25" GU10/MR16 SQUARE SHOWER TRIM
(TR1625)
Technical information
Height
Width
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 25
4.06" (103.1 mm)
7" (177.8 mm)
8.5" (215.9 mm)
4.25" (108.0 mm)
120V
GU10, 50W
IC425-GZ
4.25'' I.C. HOUSING - GU10 AIRTIGHT
These compact housings are built for ceilings with
insulation. They may be used in new construction,
renovation or acoustic tile applications.
Adjustable mounting bars allow for installation
between 14.25" (360mm) to 26.00" (660mm). Can
be installed in ceilings up to 1.25" (32mm) thick.
Socket, Quick Connect wire connectors and built-in
thermal protection included.
Approved for humid locations, housing completely
sealed, stops any air exchange within the ceiling
cavity.
Ideal for high energy efficiency construction.
To be used with trim model :
GU10 - 35W: TR1615, TR1625,
TR1675
GU10 - 50W: TR1510, TR1530,
TR1575
TRIMS FOR THIS PRODUCT
TR1510 - 4.25" GU10/MR16 RECESSED TRIM (TR1510)
TR1530 - 4.25" GU10/MR16 GIMBAL TRIM (TR1530)
TR1615 - 4.25" GU10/MR16 SHOWER TRIM (TR1615)
TR1625 - 4.25" GU10/MR16 SHOWER TRIM (TR1625)
TR1575 - 4.25" GU10/MR16 SQUARE GIMBAL TRIM
(TR1575)
TR1675 - 4.25" GU10/MR16 SQUARE SHOWER TRIM
(TR1625)
Technical information
Height
Width
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 26
6" (152.4 mm)
6.25" (158.8 mm)
8.5" (215.9 mm)
4.25" (108.0 mm)
120V
GU10, 35 & 50W
K150H-42-MED
4.25'' PAR20 REMODEL HOUSING - Premium
Series
These housings are constructed of heavy-duty steel
and a tight assembly so as to avoid noise and
vibration.
The mounting system allows a quick, easy and
sturdy installation, using the automatic positioning
feature. - 2 screw system
Mainly used for renovation or ceilings with limited
space, where no insulation is used.
Can be installed in ceilings with, up to 1.25'' (32mm)
of thickness.
Approved for damp locations, with built-in thermal
protection and "Quick Connect wire connectors
included
.
TRIMS FOR THIS PRODUCT
TR1390 - 4.25" PAR20 RECESSED TRIM (TR1390)
TR1350 - 4.25" PAR20 GIMBAL TRIM (TR1350)
TR1325 - 4.25" PAR20 SHOWER TRIM (TR1325)
TR1320 - 4.25" PAR20 DOWNLIGHT TRIM (TR1320)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 27
4.62" (117.3 mm)
10.29" (261.4 mm)
4.25" (108.0 mm)
120V
PAR20, 50W
R425-MED
4.25" PAR20 REMODEL HOUSING
Housings constructed of heavy duty galvanized steel
with junction box - Built-in thermal protection
Patented adjustable mounting clips (3) and "Quick
Connect" wire connectors, allow for a quick, easy
and sturdy installation
Can be installed in ceilings up to 1.25" (32mm) in
thickness
Approved for damp locations
TRIMS FOR THIS PRODUCT
TR1350 - 4.25" PAR20 GIMBAL TRIM (TR1350)
TR1390 - 4.25" PAR20 RECESSED TRIM (TR1390)
TR1325 - 4.25" PAR20 SHOWER TRIM (TR1325)
TR1320 - 4.25" PAR20 DOWNLIGHT TRIM (TR1320)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 28
4.62" (117.3 mm)
10.29" (261.4 mm)
4.25" (108.0 mm)
120V
PAR20, 50W
ICR425-MED
4.25" R20/PAR20 INSULATED REMODEL
HOUSING
Housings constructed of ALUMINIUM with junction
box - Built-in thermal protection
This housing is designed for a retro-fit application,
where the ceiling is insulated.
The unit is IC rated, but may be also converted to an
AirTight rating as well.
To convert the housing to an AirTight rating after
installation, simply cover the mounting clip slots with
the strips of metal tape included in the housing.
Patented adjustable mounting clips (3) and "Quick
Connect" wire connectors, allow for a quick, easy
and sturdy installation.
Insulated Ceiling Application:
R20 - Max. 30W
PAR20 - Max. 35W
Non-Insulated Ceiling Application:
R20 - Max. 50W
PAR20 - Max. 50W
Can be installed in ceilings up to 1.25" (32mm) in
thickness
TRIMS FOR THIS PRODUCT
TR1360 - 4.25'' REFLECTOR TRIM R20/PAR20 (TR1360)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 29
5.75" (146.1 mm)
10.29" (261.4 mm)
4.25" (108.0 mm)
120V
R20 - PAR20
R425DS-MED
4.25" R20/PAR20 REMODEL HOUSING FOR
BA20
This NON-IC rated remodel housing is well suited for
the budget minded projects.
This high quality ecomonic grade housing is
constructed of heavy duty galvanized steel with
junction box, and includes built-in thermal protection.
Easy to install mounting clips (2) allow for a quick
and sturdy installation
Can be installed in ceilings up to 1.25" (32mm) in
thickness.
Will accept either a PAR20 or R20 bulb, at a
maximum of 50 watts.
TRIMS FOR THIS PRODUCT
BA20 - 4.25'' OPEN TRIM R20/PAR20 (BA20)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 30
5.5" (139.7 mm)
10.29" (261.4 mm)
4.25" (108.0 mm)
120V
R20/PAR, 50W
NC425-MED
4.25" PAR20 NEW CONSTRUCTION
HOUSING
Housing constructed of heavy duty galvanized steel
with junction box - Built-in thermal protection
Ideal for open ceilings with no insulation, new
constructions or acoustic tiles
Adjustable mounting bars included, allows for
installation between 13.00" (320mm) and
26.00"(660mm) openings
"Quick Connect" wire connectors included
Can be installed in ceilings up to 1.25" (32mm) in
thickness
Approved for damp locations
TRIMS FOR THIS PRODUCT
TR1320 - 4.25" PAR20 DOWNLIGHT TRIM (TR1320)
TR1325 - 4.25" PAR20 SHOWER TRIM (TR1325)
TR1350 - 4.25" PAR20 GIMBAL TRIM (TR1350)
TR1390 - 4.25" PAR20 RECESSED TRIM (TR1390)
Technical information
Height
Width
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 31
4.06" (103.1 mm)
7" (177.8 mm)
8.5" (215.9 mm)
4.25" (108.0 mm)
120V
PAR20, 50W
IC425-MED
4.25'' I.C. HOUSING -PAR20/PAR16
AIRTIGHT
These compact housings are built for ceilings with
insulation. They may be used in new construction,
remodeling or acoustic tile applications.
Adjustable mounting bars allow for installation
between 14.25" (360mm) to 26.00" (660mm). Can
be installed in ceilings up to 1.25" (32mm) thick.
Socket, Quick Connect wire connectors and built-in
thermal protection included.
Approved for humid locations, housing completely
sealed, stops any air exchange within the ceiling
cavity.
Ideal for high energy efficiency construction.
To be used with trim model :
PAR20 - 35W: TR1325, TR1320
PAR20 - 50W: TR1350, TR1390
MRE-E26 Base- 35W: TR1615, TR1625,
TR1675
MRE-E26 Base- 50W: TR1510, TR1530,
TR1575
TRIMS FOR THIS PRODUCT
TR1320 - 4.25" PAR20 DOWNLIGHT TRIM (TR1320)
TR1325 - 4.25" PAR20 SHOWER TRIM (TR1325)
TR1350 - 4.25" PAR20 GIMBAL TRIM (TR1350)
TR1390 - 4.25" PAR20 RECESSED TRIM (TR1390)
Technical information
Height
Width
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 32
6" (152.4 mm)
6.25" (158.8 mm)
8.5" (215.9 mm)
4.25" (108.0 mm)
120V
PAR20, MRE26, 35 & 50W
K152H-42-MR
4.25'' MR16 REMODEL HOUSING - Premium
Series
These housings are constructed of heavy-duty steel
and a tight assembly so as to avoid noise and
vibration. Housings include junction box and
magnetic transformer (120V / 12V).
The mounting system allows a quick, easy and
sturdy installation, using the automatic positioning
feature. - 2 screw system
Mainly used for renovation or ceilings with limited
space, where no insulation is used.
Can be installed in ceilings with, up to 1.25'' (32mm)
of thickness.
Approved for damp locations, with built-in thermal
protection feature and "Quick Connect" wire
connectors
Magnetic transformer (120V / 12V) included
TRIMS FOR THIS PRODUCT
TR1625 - 4.25" GU10/MR16 SHOWER TRIM (TR1625)
TR1615 - 4.25" GU10/MR16 SHOWER TRIM (TR1615)
TR1530 - 4.25" GU10/MR16 GIMBAL TRIM (TR1530)
TR1510 - 4.25" GU10/MR16 RECESSED TRIM (TR1510)
TR1575 - 4.25" GU10/MR16 SQUARE GIMBAL TRIM
(TR1575)
TR1675 - 4.25" GU10/MR16 SQUARE SHOWER TRIM
(TR1625)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 33
4.55" (115.6 mm)
13.19" (335.0 mm)
4.25" (108.0 mm)
12V
MR16, 50W
R425-MR
4.25" MR16 REMODEL HOUSING
Housings constructed of heavy duty galvanized steel
with junction box and magnetic transformer (120V /
12V)
Patented adjustable mounting clips (3) allow for a
quick, easy and sturdy installation
Socket, "Quick Connect" wire connectors and built-in
thermal protection included
Can be installed in ceilings up to 1.25" (32mm) in
thickness
Approved for damp locations
TRIMS FOR THIS PRODUCT
TR1625 - 4.25" GU10/MR16 SHOWER TRIM (TR1625)
TR1510 - 4.25" GU10/MR16 RECESSED TRIM (TR1510)
TR1530 - 4.25" GU10/MR16 GIMBAL TRIM (TR1530)
TR1615 - 4.25" GU10/MR16 SHOWER TRIM (TR1615)
TR1575 - 4.25" GU10/MR16 SQUARE GIMBAL TRIM
(TR1575)
TR1675 - 4.25" GU10/MR16 SQUARE SHOWER TRIM
(TR1625)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 34
4.55" (115.6 mm)
10.375" (263.5 mm)
4.25" (108.0 mm)
12V
MR16, 50W
NC425-MR
4.25" MR16 NEW CONSTRUCTION HOUSING
Housings constructed of heavy duty galvanized steel
- Built-in thermal protection
Ideal for open ceilings with no insulation - New
Construction or acoustic tiles
Adjustable mounting bars included, allows for
installation between 13.00" (320mm) and 26.00"
(660mm) openings
Can be installed in ceilings up to 1.25" (32mm) in
thickness
Magnetic Transformer (120V / 12V) and " Quick
Connect" wire connectors included
TRIMS FOR THIS PRODUCT
TR1625 - 4.25" GU10/MR16 SHOWER TRIM (TR1625)
TR1615 - 4.25" GU10/MR16 SHOWER TRIM (TR1615)
TR1530 - 4.25" GU10/MR16 GIMBAL TRIM (TR1530)
TR1510 - 4.25" GU10/MR16 RECESSED TRIM (TR1510)
TR1575 - 4.25" GU10/MR16 SQUARE GIMBAL TRIM
(TR1575)
TR1675 - 4.25" GU10/MR16 SQUARE SHOWER TRIM
(TR1625)
Technical information
Height
Width
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 35
4.06" (103.1 mm)
7" (177.8 mm)
11.41" (289.8 mm)
4.25" (108.0 mm)
12V
MR16, 50W
IC425-MR
4.25'' I.C. HOUSING - AIRTIGHT MR16
These housings are built for ceilings with insulation.
They may be used in new construction, remodeling
or acoustic tile applications.
Adjustable mounting bars allow for installation
between 14.25" (360mm) to 26.00" (660mm). Can
be installed in ceilings up to 1.25" (32mm) thick.
Socket, built-in thermal protection, "Quick Connect"
wire connectors and magnetic transformer (120V /
12V) included.
Approved for humid locations, housing completely
sealed, stops any air exchange within the ceiling
cavity.
Ideal for high energy efficiency construction.
For a shower application, a maximum of a 35W bulb
may be installed.
TRIMS FOR THIS PRODUCT
TR1510 - 4.25" GU10/MR16 RECESSED TRIM (TR1510)
TR1530 - 4.25" GU10/MR16 GIMBAL TRIM (TR1530)
TR1615 - 4.25" GU10/MR16 SHOWER TRIM (TR1615)
TR1625 - 4.25" GU10/MR16 SHOWER TRIM (TR1625)
TR1575 - 4.25" GU10/MR16 SQUARE GIMBAL TRIM
(TR1575)
TR1675 - 4.25" GU10/MR16 SQUARE SHOWER TRIM
(TR1625)
Technical information
Height
Width
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 36
6.75" (171.5 mm)
8.75" (222.3 mm)
14" (355.6 mm)
4.25" (108.0 mm)
12V
MR16, 35 & 50W
K150H-45-MED
4.50'' PAR30 REMODEL HOUSING - Premium
Series
These housings are constructed of heavy-duty steel
and a tight assembly so as to avoid noise and
vibration.
The mounting system allows a quick, easy and
sturdy installation, using the automatic positioning
feature. - 2 screw system
Mainly used for renovation or ceilings with limited
space, where no insulation is used.
Can be installed in ceilings with, up to 1.25'' (32mm)
of thickness.
Approved for damp locations, with built-in thermal
protection and "Quick Connect wire connectors
included
TRIMS FOR THIS PRODUCT
TR1950 - 4.5" PAR30 GIMBAL TRIM (TR1950)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 37
4.62" (117.3 mm)
10.47" (265.9 mm)
4.5" (114.3 mm)
120V
PAR30 SN, 75W
R450-MED
4.50" PAR30 REMODEL HOUSING
Housings constructed of heavy duty galvanized steel
with junction box - Built-in thermal protection
Patented adjustable mounting clips (3) and "Quick
Connect" wire connectors, allow for a quick, easy
and sturdy installation
Can be installed in ceilings up to 1.25" (32mm) in
thickness
Approved for damp locations
TRIMS FOR THIS PRODUCT
TR1950 - 4.5" PAR30 GIMBAL TRIM (TR1950)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 38
4.62" (117.3 mm)
10.47" (265.9 mm)
4.5" (114.3 mm)
120V
PAR30 SN, 75W
NC450-MED
4.5" PAR30 NEW CONSTRUCTION HOUSING
Housings constructed of heavy duty galvanized steel
with junction box - Built-in thermal protection
Ideal for open ceilings with no insulation - New
Construction or acoustic tiles
Adjustable mounting bars included, allows for
installation between 13.00" (320mm) and
26.00"(660mm) openings
"Quick Connect" wire connectors included
Can be installed in ceilings up to 1.25" (32mm) in
thickness
Approved for damp locations
TRIMS FOR THIS PRODUCT
TR1950 - 4.5" PAR30 GIMBAL TRIM (TR1950)
Technical information
Height
Width
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 39
4.06" (103.1 mm)
7" (177.8 mm)
11.41" (289.8 mm)
4.5" (114.3 mm)
120V
PAR30 SN, 75W
IC450-MED
4.50'' INSULATED CEILING HOUSING PAR30
These compact housings are built for ceilings with
insulation. They may be used in new construction,
remodeling or acoustic tile applications.
Adjustable mounting bars allow for installation
between 14.25" (360mm) to 26.00" (660mm). Can
be installed in ceilings up to 1.25" (32mm) thick.
Socket, Quick Connect wire connectors and built-in
thermal protection included.
Approved for humid locations, housing completely
sealed, stops any air exchange within the ceiling
cavity.
Ideal for high energy efficiency construction.
To be used with trim model :
PAR30 - 75W: TR1950 SHORT NECK
TRIMS FOR THIS PRODUCT
TR1950 - 4.5" PAR30 GIMBAL TRIM (TR1950)
Technical information
Height
Width
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 40
6" (152.4 mm)
6.25" (158.8 mm)
8.5" (215.9 mm)
4.5" (114.3 mm)
120V
PAR30 SN, 75W
1770
4.5" R20/PAR20 SHOWER TRIM & HOUSING
(1770)
Product codes
1770-CHR : CHROME
1770-WH : WHITE
4.5" shower trim and housing for installation in
insulated or non-insulated ceiling -Built-in thermal
protection
For use with A19 - 40W, CFL or PAR20 - 50W Bulb
Bulbs NOT included
Certified for humid locations such as showers
Features frosted glass
WHITE
CHROME
Technical information
Diameter
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 41
6.75" (171.5 mm)
5.5" (139.7 mm)
10.25" (260.4 mm)
4.5" (114.3 mm)
120V
A19, CFL, PAR20
K150H-35B-MED-WH
3.5" R20/PAR20 DOWNLIGHT HOUSING PREMIUM SERIES
Sold in 12-pack cases
These complete units include housing and trim with
built-in thermal protection.
The mounting system allows a quick, easy and
sturdy installation, using the automatic positioning
feature. - 2 screw system
Provides a perfect combination of line voltage (120V)
recessed lighting with easy installation and good
quality, all at an affordable price
May be installed in insulated or non-insulated
ceilings. For insulated ceilings, use insulated box
#IB410 and Vapour Barrier #VP99
Aluminum construction ideal for outdoor applications
- soffits
ALSO AVAILABLE:
4.5" - White Baffle (BA45-WH)
4.5" - Black Baffe (BA45-BLK)
Bulb not included
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 42
4.59" (116.6 mm)
10.1" (256.5 mm)
3.5" (88.9 mm)
120V
R20/PAR20 50W
k150H-45B-MED-WH
4.5" R30/PAR30 DOWNLIGHT HOUSING PREMIUM SERIES
Sold in 12-pack cases
These complete units include housing and trim with
built-in thermal protection.
The mounting system allows a quick, easy and
sturdy installation, using the automatic positioning
feature. - 2 screw system
Adjustable socket feature, allows for various
R30/PAR30 type bulbs
Provides a perfect combination of line voltage (120V)
recessed lighting with easy installation and good
quality, all at an affordable price
May be installed in insulated or non-insulated
ceilings. For insulated ceilings, use insulated box
#IB410 and Vapour Barrier #VP99
Aluminum construction ideal for outdoor applications
- soffits
ALSO AVAILABLE:
4.5" - White Baffle (BA45-WH)
4.5" - Black Baffe (BA45-BLK)
Technical information
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 43
5.11" (129.8 mm)
11.06" (280.9 mm)
4.5" (114.3 mm)
120V
R30/PAR30 75W
1726-AL
4.5" GU24 OPEN TRIM HOUSING - Aluminum
Product codes
1726-WH-AL : WHITE
This complete unit includes housing, trim and
reflector - Built-in thermal protection
Provides a perfect combination of line voltage (120V)
recessed lighting with easy installation and good
quality, all at an affordable price
May be installed in insulated and non-insulated
ceilings. For insulated ceilings, use insulated box
#IB410 and Vapour Barrier #VP99
Lamp uses 1 x 13W GU24 energy saving bulb
(included) - 10,000 hrs life
GU24 bulbs provide more efficient light, by emitting
less heat than incandescent bulbs
INCLUDED:
Aluminum construction, and Reflector
GU24 13W Energy Saving Bulb
Technical information
Diameter
Height
Length
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 44
5.94" (150.9 mm)
5.44" (138.2 mm)
11" (279.4 mm)
4.63" (117.6 mm)
120V
GU24, 13W
1726-ALBX
4.5" GU24 OPEN TRIM HOUSING - Aluminum
(BX)
Product codes
1726-WH-ALBX : WHITE
This complete unit includes trim, refelector and 18"
BX Cable - Built-in thermal protection
Provides a perfect combination of line voltage (120V)
recessed lighting with easy installation and good
quality, all at an affordable price
May be installed in insulated and non-insulated
ceilings. For insulated ceilings, use insulated box
#IB410 and Vapour Barrier #VP99
Lamp uses 1 x 13W GU24 energy saving bulb
(included) - 10,000 hrs life
GU24 bulbs provide more efficient light, by emitting
less heat than incandescent bulbs
INCLUDED:
GU24 13W Energy Saving Bulb
ALUMINUM construction, Reflector & 18" BX
CABLE
Technical information
Diameter
Height
Cutting hole
Voltage
Bulb
http://www.ndrelectric.com
Page 45
6" (152.4 mm)
5.75" (146.1 mm)
4.63" (117.6 mm)
120V
GU24, 13W
IB410
INSULATED BOX
These boxes are built for ceilings with insulation.
Can be used in new construction, remodeling or
acoustic tile applications.
Adjustable mounting bars allow for installation
between 13.0" (320mm) to 26.0" (660mm) - included.
Resists to extreme temperatures
To be used in conjunction with any NDR remodel
housings. Box will accommodate NDR remodel
housings of 3.00", 4.25" or 4.50" diameters
Suited for the following remodel housings:
R300-GZ, R425-GZ, R425-MED, R425-MR or
R450-MED
K150H-42-GZ, K150H-42-MED or K150H-45-MED
R300-L35 or R425-L35
Approved for damp locations, housing completely
sealed, stops any air exchange within the ceiling
cavity
Ideal for high energy efficiency construction
Galvanized steel construction
CSA & UL APPROVED
Technical information
Height
6.8" (172.7 mm)
Width
8.66" (220.0 mm)
Length
12.6" (320.0 mm)
http://www.ndrelectric.com
Page 46
VP99
VAPOUR BARRIER
Vapor barrier unit to be used with all NDR insulated
boxes.
Prevents the housing and trim from rusting
Ideal for high energy efficiency construction
Technical information
Height
7" (177.8 mm)
Width
18" (457.2 mm)
Length
25" (635.0 mm)
http://www.ndrelectric.com
Page 47
BA35
3.5" BAFFLE for R20/PAR20
Product codes
BA35-BLK : BLACK
BA35-WH : WHITE
Baffle for use with R20/PAR20 housings
Available in black or white
BLACK
WHITE
Technical information
Diameter
3.585" (91.1 mm)
http://www.ndrelectric.com
Page 48
BA45
4.5" BAFFLE for R30/PAR30
Product codes
BA45-WH : WHITE
BA45-BLK : BLACK
Baffle for use with R30/PAR30 housings
Available in black or white
WHITE
BLACK
Technical information
Diameter
4.41" (112.0 mm)
http://www.ndrelectric.com
Page 49
MP
MOUNTING PLATE
Product codes
MP350 : 3.5" Diameter of Hole
MP425 : 4.25" Diameter of Hole
MP450 : 4.5' Diameter of hole
Versatile mounting plate allows installation of all
models of re-model and open trim housings
Available in 3 hole diameters; 3.5", 4.25" and 4.5"
Technical information
Width
6.5" (165.1 mm)
Length
6.5" (165.1 mm)
http://www.ndrelectric.com
Page 50
AMP
ADJUSTABLE MOUNTING PLATE
Product codes
AMP425 : 4.25'' Diameter of Hole
AMP350 : 3.50'' Diameter of Hole
AMP450 : 4.50'' Diameter of Hole
Versatile adjustable mounting plate allows
installation of all re-model or open trim housings.
Available in 3 hole diameters; 3.5", 4.25" and 4.5".
Technical information
Width
6.5" (165.1 mm)
Length
15.94" (404.9 mm)
http://www.ndrelectric.com
Page 51

Download Report