206
REFERENCES
1.
Abdullah-al-kafi and Abedin M.Z. (2006) ‘Study on the Mechanical
Properties of Jute/glass Fiber-reinforced Unsaturated Polyester Hybrid
Composites: Effect of Surface Modification by Ultraviolet Radiation’,
Journal of Reinforced Plastics and Composites, Vol. 25, No.6,
pp.575-588.
2.
Abu Bakar A. Hariharan and Abdul Khalil H.P.S. (2005)
‘Lignocellulose-based Hybrid Bilayer Laminate Composite: Part I –
Studies on Tensile and Impact Behavior of Oil palm Fiber-Glass FiberReinforced Epoxy Resin’ Journal of Composite Materials, Vol.39,
pp.663-683.
3.
Akbar Afaghi-Khatibi and Lin Ye. (1997) ‘Residual Strength
Simulation of Fibre Reinforced Metal Laminates Containing a Circular
Hole’ Journal of Composite Materials, Vol.31, No.19, pp.142-163.
4.
Akbar Afaghi-Khatibi, Lin Ye and Yiu-Wing Mai (1996) ‘An
Effective Crack Growth Model for Residual Strength Evaluation of
Composite Laminates with Circular Holes’, Journal of Composite
Materials, Vol. 30, No.2, pp.142-163.
5.
Alfred C Loose and George S Springer (1979) ‘Moisture Absorption of
Graphite-Epoxy Composites Immersed in Liquids and in Humid Air’,
Journal of Composite Materials, Vol. 13, pp. 131-147.
6.
Alfred C. Loose, George S. Springer, Barbara A. Sanders and Randy
W. Tung (1980) ‘Moisture Absorption on Polyester E-glass
Composites’, Journal of Composite Materials, Vol.14, pp. 142-154.
7.
Anish Kumar, Rajkumar K.V., Palanichamy P., Jayakumar T.,
Patankar V.H., Joshi V.M., Lande B.K., Chellapandian R.,
Kasiviswanathan K.V. and Baldev Raj (2005) ‘Development and
Application of C-Scan Ultrasonic Facility’, Vol. 4, No.1, pp. 11-16.
8.
Andreas P. Christoforou (2001) ‘Impact Dynamics and Damage in
Composite Structures’, Composite Structures, Vol. 52, pp.181-188.
207
9.
Arib R.M.N., Sapuan S.M., Ahmad M.M.H.M., Paridah M.T. and
Khairul Zaman H.M.D. (2006) ‘Mechanical Properties of Pine apple
Leaf Fiber Reinforced Polypropylene Composites’, Materials and
Design, Vol. 27, pp. 391-396.
10.
ASM International Hand Book of Composites (2001), Vol. 21, Ohio.
11.
Belmonte H.M.S., Manger C.I.C., Ogin S.L., Smith P.A. and Lewin R.
(2001) ‘Characterization and Modelling of the Notched Tensile
Fracture of Woven Quasi-isotropic GFRP Laminates’, Composite
Science and Technology, Vol.61, pp.585-597.
12.
Bhagwan D. Agarwal and Lawrence J. Broutman (1979) ‘Analysis and
Performance of Fiber Composites’ John Wiley & Sons, New York.
13.
Bhyrav Mutnuri (2006) ‘Thermal Conductivity Characterization of
Composite Materials’ Master of Science Thesis, West Virginia
University, Morgantown, West Virginia.
14.
Bisanda E.T.N. and Ansell M.P. (1991) ‘The Effect of Silane
Treatment on the Mechanical and Physical Properties of Sisal-Epoxy
Composites’ Composite Science and Technology, Vol. 41, pp.165-178.
15.
Bonnian P. and Bunsell A.R. (1981) ‘A Comparative Study of Water
Absorption Theories Applied to Glass Epoxy Composites’, Journal of
Composite Materials, Vol. 15, pp. 272-293.
16.
Bunsell A.R. and Renald J. (2005) ‘Fundamentals of Fiber Reinforced
Composite Materials’ IOP Publishing Ltd, Bristol.
17.
Cantwell W.J. and Morton J. (1990) ‘An Assessment of the Residual
Strength of an Impact-Damaged Carbon Fiber Reinforced Epoxy’
Composite Structures, Vol. 14, pp. 303-317.
18.
Chang F.K., Scott R.A. and Springer G.S. (1982) ‘Strength of
Mechanically Fastened Composite Joints’ Journal of Composite
Materials, Vol. 16, pp. 470-494.
19.
Clark R.A. and Ansell M.P. (1986) ‘Jute and Glass Fibre Hybrid
Laminates’ Journal of Material Science, Vol.21, pp. 269-276.
20.
Collings T.A. and Copley S.M. (1983) ‘On the Accelerated Ageing of
CFRP’ Composites, Vol. 14, pp. 180-188.
208
21.
Daniel Gay, Suong V Hoa and Stephen V Tsai (2003) ‘Composite
materials-Design and applications’ CRC Press, Paris.
22.
Danjaji I.D., Nawang R., Ishiaku U.S., Ismail H. and Mohd Ishak
Z.A.M. (2002) ‘Degradation Studies and Moisture Uptake of Sagostarch-filled Linear Low-density Polyethylene Composites’ Polymer
Testing, Vol. 21, pp. 75-81.
23.
Daughlas C. Montegomary (1997) ‘Design and Analysis of
Experiments’ 4th Edition, John Wiley & Sons, New York.
24.
Davies G.A.O. and Hitchings D (1996) ‘Impact Damage and Residual
Strengths of Woven Fabric Glass/Polyester Laminates’ Composites
Part A, Vol. 27A, pp. 1147-1156.
25.
Ellen Lackey, James G.V., Kapil Inamdar and Brittany Hancock
(2004) Composites 2004 Convention and Trade Show American
Composites Manufacturers Association, Tampa, Florida, USA, pp.1-9.
26.
Encyclopedia of Composite Materials and Components (1983), John
Wiley & Sons, New York.
27.
Errajhi O.A.Z., Osborne J.R.F., Richardson M.O.W. and Dhakal H.N.
(2005) ‘Water Absorption Characteristics of Aluminized E-glass Fibre
Reinforced Unsaturated Polyester Composites’ Composite Structures,
Vol. 71, pp. 333-336.
28.
Eugenio de Azevedo Soriano and Sergio Francino Muller de Almeida
(1999) ‘Notch sensitivity of Carbon/Epoxy Fabric Laminates’
Composite Science and Technology, Vol.59, pp.1143-1151.
29.
Geethamma V.G., Reethamma Joseph and Sabu Thomas (1995) ‘Short
Coir Fiber-reinforced Natural Rubber Composites: Effects of Fiber
length, Orientation and Alkali treatment’ Journal of Applied Polymer
Science, Vol. 55, pp. 583-594.
30.
Ghasemi Nejhad M.N. and Parvizi-Majidi A. (1990) ‘Impact behavior
and Damage Tolerance of Woven Carbon Fiber-Reinforced
Thermoplastic Composites’ Composites, Vol.21, No.2, pp.155–168.
31.
Ghosh P. (1998) ‘Photofunctionalization of Cotton, Jute and Related
Fibers Using some Photo Active Organic Acids’, Intl.Conf. on Jute and
Allied Fibers-Changing Global Scenario, Calcutta, India, pp. 255-258.
209
32.
Godwin E.W and Matthews F.L. (1980) ‘Review of the Strengths of
Joints in Fiber-Reinforced Plastics. Part 1: Mechanical Fastened Joints’
Composites, Vol. 11, pp. 155-160.
33.
Gommers B., Verpoest I. and Van Houtte P. (1996) ‘Modelling the
Elastic Properties of Knitted-fabric-reinforced Composites’ Composite
Science and Technology, Vol.56, pp.685-694.
34.
Gorden Kelly (2005) ‘Load Transfer in Hybrid (Bonded/Bolted)
Composite Single-Lap Joints’ Composite Structures, Vol. 69,
pp. 35-43.
35.
Hamada H., Maekawa Z.I and Haruna K. (1996) ‘Strength Prediction
of Mechanically Fastened Quasi-isotropic Carbon-Epoxy Joints’
Journal of Composite Materials, Vol. 30, pp. 1596-1612.
36.
Helfilnstine
(1977)
‘Charpy
Impact
of
Unidirectional
Graphite/Aramid/Epoxy Hybrid Composites’ Composite Materials:
Testing and Design (Fourth Conference), ASTM STP 617, pp.375-388.
37.
Herrera P.J., Franco and Valadoz Gonzalez A. (2004) ‘Mechanical
Properties of Continuous Natural Fibre Reinforced Polymer
Composites’ Composites Part A, Vol.35, pp. 339-345.
38.
Hine P.J., Duckett R.A. and Ward I.M. (1993) ‘Modelling the Elastic
Properties of Fibre-Reinforced Composites: II Theoretical Predictions’
Composite Science and Technology, Vol.49, pp.13-21.
39.
Hosur M.V., Adbullah M. and Jeelani S. (2005) ‘Studies on the LowVelocity Impact Response of Woven Hybrid Composites’ Composite
Structures, Vol. 67, pp. 253-262.
40.
Han-Seung Yang, Hyun-Joong Kim and Hee-Jun Park (2006) ‘ Water
Absorption Behavior and Mechanical Properties of Lignocellulosic
Filler-Polyoefin Bio-composites’ Composite Structures, Vol. 72,
pp.429-437.
41.
Huang Gu and Sun Hongxia (2007) ‘Effect of Water Absorption on the
Mechanical Properties of Glass/Polyester Composites’ Materials and
Design, Vol. 28, pp. 1647-1650.
42.
Ingvar Eriksson and Carl Gustaf Aronsson (1990) ‘Strength of Tensile
Loaded Graphite/Epoxy Laminates Containing Cracks, Open and
Filled Holes’ Journal of Composite Materials, Vol.24, pp.456-481.
210
43.
Ishikawa T. and Chou T. (1982) ‘Stiffness and Strength Behavior of
Woven Fabric Composites’, Journal of Material Science, Vol.17,
pp. 3211-3220.
44.
Jang B.P., Kowbel W. and Jang B.Z. (1992) ‘Impact Behavior and
Impact Fatigue Testing of Polymer Composites’, Composite Science
and Technology, Vo. 44, pp.107-118.
45.
Jang-Kyo Kim and Man-Lung Sham (2000) ‘Impact and Delamination
Failure of Woven-fabric Composites’, Composite Science and
Technology, Vol. 60, pp. 745-761.
46.
Jayamol G., Bhagawan S.S., Prabhakaran N. and Sabu Thomas J.
(1995)
‘Short
Pineapple-leaf-fiber-reinforced
Low-density
Polyethylene Composites’, Applied Polymer Science, Vol. 57,
pp.843-854.
47.
Jeremy Gustin, Aaran Joneson, Mohammad Mahinfalah and James
Stone (2005) ‘Low Velocity Impact of Combination Kevlar/Carbon
Fiber Sandwich Composites’, Composite Structures, Vol. 69, No.4,
pp. 396-406.
48.
Jochen Gassan and Bledzki A.K. (1999). ‘Possibility for Improving the
Mechanical Properties of Jute/Epoxy Composites by Alkali Treatment
of Fibres’, Composite Science and Technology, Vol.59, pp.1303-1309.
49.
John K. and Venkata Naidu S. (2004) ‘Effect of Fiber Content and
Fiber Treatment on Flexural Properties of Sisal Fiber/Glass Fiber
Hybrid Composites’, Journal of Reinforced Plastics and Composites,
Vol. 23, No.15, pp.1601-1605.
50.
John K. and Venkata Naidu S. (2004) ‘Sisal Fibre/Glass Fibre Hybrid
Composites: Impact and Compressive Properties’, Journal of
Reinforced plastics and Composites, Vol. 23, No12, pp.1253-1258.
51.
John, K. and Venkata Naidu, S. (2004) ‘Tensile Properties of
Unsaturated Polyester Based Sisal Fibre-Glass Fibre Hybrid
Composites’, Journal of Reinforced Plastics and Composites, Vol. 23,
No 17, pp. 1815-1819.
52.
Jonathan Awerbuch, Madhu S. Madhukar (1985) ‘Notched Strength of
Composite Laminates: Prediction and Experiments – A Review’,
Journal of Reinforced Plastics and Composites, Vol. 4, pp. 3-159.
211
53.
Joshi S.V., Drzal L.T., Mohanty A.K. and Arora S. (2004) ‘Are
Natural Fiber Composites Environmentally Superior to Glass Fiber
Reinforced Composites?’, Composites Part A, Vol. 35, pp. 371-376.
54.
Jung-Kyu Kim and Do-Sik Kim (1995) ‘Notched Strength and Fracture
Criterion in Fabric Composite Plates Containing a Circular Hole’,
Journal of Composite Materials, Vol. 29, pp.982-998.
55.
Karmakar A.C. (1997) ‘Effect of Water Absorption on Dimensional
Stability and Impact Energy of Jute Fiber Reinforced Polypropylene’,
Journal of Materials Science Letters, Vol. 16, pp. 462-464.
56.
Karmaker A.C., Hoffmann A. and Hinrichsen G. J. (1994) ‘Influence
of Water Uptake on the Mechanical Properties of Jute Fiber-reinforced
Polypropylene’, Journal of Applied Polymer Science, Vol. 54,
pp.1803-1807.
57.
Khondker O.A., Herszberg I. and Hamada H. (2004) ‘Measurements
and Prediction of the Compression-after-impact Strength of Glass
Knitted Textile Composites’, Composites Part A, Vol.35, pp.145-157.
58.
Krishan K. Chawla (1998), ‘Composite Materials: Science and
Engineering’, Springer-Verlag, NewYork.
59.
Krystyna Imielinska and Laurent Guillaumat (2004) ‘The Effect of
Water Immersion Ageing on Low-velocity Impact Behavior of Woven
Aramid-Glass Fibre/Epoxy Composites’, Composite Science and
Technology, Vol. 64, pp.2271-2278.
60.
Kuruvilla Joseph and Sabu Thomas (1996) ‘Effect of Chemical
Treatment on the Tensile Properties of Short Sisal Fiber-reinforced
Polyethylene Composites’, Polymer, Vol.37, pp.5139-5149.
61.
Kuruvilla Joseph and Sabu Thomas (1995) ‘Effect of Ageing on the
Physical and Mechanical Properties of Sisal-fiber Reinforced
Polyethylene Composites’, Composite Science and Technology,
Vol.53, pp. 99-110.
62.
Laly A. Pothan and Sabu Thomas (2004) ‘Effect of Hybridization and
Chemical Modification on the Water-Absorption Behavior of Banana
Fiber-Reinforced Polyester Composites’, Journal of Applied Polymer
Science, Vol. 91, pp. 3856-3865.
212
63.
Laly A. Pothan, Petra Potschke, Rudiger Habler and Sabi Thomas
(2005) ‘The Static and Dynamic Mechanical Properties of Banana and
Glass Fiber Woven Fabric-Reinforced Polyester Composites’, Journal
of Composite Materials, Vol. 39, No.11, pp. 1007-1025.
64.
Lawrence C.Bank and Russel Gentry (1995) ‘Accelerated Test
Methods to Determine the Long-Term Behavior of FRP Composite
Structures: Environmental Effects’, Journal of Reinforced Plastics and
Composites, Vol. 14, pp. 559-586.
65.
Leif A Carlsson and Byron Pipes R. (1987) ‘Experimental
Characterization of Advanced Composite Materials’, Prentice-Hall,
New Jersey.
66.
Leif E. Asp, Soren Nilsson and Sunil Singh (2001) ‘An Experimental
Investigation of the Influence of Delamination Growth on the Residual
Strength of Impacted Laminates’, Composites Part A, Vol.32,
pp. 1229-1235.
67.
Li Xiao, Mines R.A.W. and Birch R.S. (2001) ‘Static and Dynamic
Behavior of Composite Riveted Joints in Tension’, International of
Mechanical Sciences, Vol. 43, pp. 1591-1610.
68.
Mallick P K. (1997) ‘Composite Engineering Hand Book’ Marcel
Dekker Inc. New York.
69.
Mallick P.K. (1993) ‘Fibre Reinforced Composites-Materials,
Manufacturing and Design’, Second Edition, Marcel Dekker, Inc. New
York.
70.
Mandar K. Chati and Ambar K. Mitra (1998) ‘Prediction of Elastic
Properties
of
Fiber-reinforced
Unidirectional
Composites’,
Engineering Analysis with Boundary Elements, Vol. 21, pp.235-244.
71.
Mathews F.L. and Rawlings R D. (1999) ‘Composite Materials:
Engineering and Science’, Second Edition, Woodhead publishing Ltd
and CRC Press. Boca Raton.
72.
Matthews F.L., Davies G.A.O., Hitchings D. and Soutis C. (1996)
‘Finite Element Modeling of Composite Materials and Structures’,
CRC Press, Boca Raton Boston, New York.
213
73.
Mishra S., Misra M., Tripathy S.S., Nayak S.K. and Mohanty A.K.
(2001) ‘Potentiality of Pineapple Leaf Fiber as Reinforcement in
PALF-polyester Composite: Surface Modification and Mechanical
Performance’, Journal of Reinforced Plastics and Composites, Vol. 20,
No.4, pp.321-334.
74.
Mishra S., Mohanty A.K., Drzal L.T., Misra M., Parija S., Nayak S.K.
and Tripathy S.S. (2003) ‘Studies on Mechanical Performance of
Biofiber/Glass Reinforced Polyester Hybrid Composites’, Composites
Science and Technology, Vol. 63, pp.1377-1385.
75.
Moe Moe Thwe and Kin Liao (2002) ‘Effects of Environmental Aging
on the Mechanical Properties of Bamboo-Glass Fibre Reinforced
Polymer Matrix Hybrid Composites’, Composites Part A, Vol. 33,
pp. 43-52.
76.
Moe Moe Thwe and Kin Liao (2003) ‘Durability of Bamboo-Glass
Fibre Reinforced Polymer Matrix Hybrid Composites’, Composite
Science and Technology, Vol. 63, pp. 375-387.
77.
Moe Moe Then and Kin Liao (2003) ‘Environmental Effects on
Bamboo-Glass/Polypropylene Hybrid Composites’, Journal of
Materials Science, Vol. 38, pp. 363-376.
78.
Mohan R, Kishore, Shridhar M.K. and Rao R.M.V.G.K. (1983)
‘Compressive Strength of Jute-glass Hybrid Fiber Composites’,
Journal of Material Science Letters, Vol.2, pp.99-102.
79.
Mohanty A.K., Mubarak Khan A. and Hinrichsen G. (2000) ‘Surface
Modification of Jute and its influence on Performance of
Biodegradable Jute-fabric/Biopol Composites’, Composites Science
and Technology, Vol. 60, pp.1115-1124.
80.
Munikenche Gowda T., Naidu A.C.B. and Rajput Chhaya. (1999).
‘Some Mechanical Properties of Untreated Jute Fabric-Reinforced
Polyester Composites’, Composites Part A, Vol.30, pp. 277-284.
81.
Naik N.K., Ramasimha R., Arya H., Prabhu S.V. and ShamaRao N.
(2001) ‘Impact Response and Damage Tolerance Characteristics of
Glass-Carbon/Epoxy Hybrid Composite Plates’ Composites Part B,
Vol. 32, pp.565-574.
214
82.
Naik N.K., Shembekar P.S. and Verma M.K. (1990) ‘On the Influence
of Stacking Sequence on the Notch Sensitivity of Fabric Laminates’,
Journal of Composite Materials, Vol.24, pp.838-852.
83.
Naughton B.P., Panjuizen F. and Vermeulen A.C. (1985) ‘The Elastic
Properties of Chopped Strand Mat and Woven Roving in
G.R.Laminate’, Journal of Reinforced Plastics and Composites, Vol.4,
pp. 195-204.
84.
Navin Chand and Rohatgi P.K. (1989) ‘Tensile Strength and Fracture
of Sun Hemp-Carbon Hybrid Fibre Composites’, Journal of Material
Science Letters, Vol.5, pp. 1181-1182.
85.
Paul Lagace A. (1986) ‘Notch Sensitivity of Graphite/Epoxy Fabric
Laminates’, Composite Science and Technology, Vol. 26, pp. 95-117.
86.
Paul Wambua, Jan Ivens and Ignaas Verpoest (2003) ‘Natural fibers:
Can they Replace Glass in Fiber Reinforced Plastics?’, Composite
Science and Technology, Vol.63, pp.1259-1264.
87.
Pavithran C., Mukherjee P.C. and Brahma Kumar M. (1991) ‘CoirGlass Intermingled Fibre Hybrid Composites’, Journal of Reinforced
Plastics and Composites, Vol.10, pp. 91-101.
88.
Pavithran C., Mukherjee P.S., Brahkumar M and Damodaran A.D.
(1991) ‘Impact Properties of Sisal-Glass Hybrid Laminates’, Journal of
Material Science, Vol.26, pp. 452-459.
89.
Pavithran C., Mukherjee P.S., Brahmakumar M. and Damodaran A.D.
(1987) ‘Impact Properties of Natural Fiber Composites’, Journal of
Material Science Letters, Vol. 6, pp. 882-884.
90.
Pipes R.B, Robert C Wetherhold, John W Gillespie J.R. (1979)
‘Notched Strength of Composite Materials’, Journal of Composite
Materials, Vol.13, pp. 148-160.
91.
Prasad S.V., Pavithran C. and Rohatgi P.K. (1983) ‘Alkali Treatment
of Coir Fibres for Coir-polyester Composites’, Journal of Materials
Science, Vol. 18, pp. 1443-1454.
92.
Rana A.K., Mandal A. and Bandyopadhyay S. (2003) ‘Short Jute Fiber
Reinforced Polypropylene Composites: Effect of Compatibilizer,
Impact Modifier and Fiber Loading’, Composite Science and
Technology, Vol. 63, pp. 801-806.
215
93.
Rao R.M.V.G.K. and Balasubramanian N. (1981) ‘Moisture
Absorption Phenomenon in Permeable Fiber Polymer Composites’,
Journal of Applied Polymer Science, Vol. 26, pp. 4069-4079.
94.
Razera I.A.T. and Frollini E. (2004) ‘Composites Based on Jute Fibers
and Phenolic Matrices: Properties of Fibers and Composites’, Journal
of Applied Polymer Science, Vol. 91, pp. 1077-1085.
95.
Rengarajan Mohan and Kishore (1985) ‘Jute-Glass Sandwich
Composites’, Journal of Reinforced Plastics and Composites, Vol.4,
pp.186-194.
96.
Rout J., Mishra M., Tripathi S.S., Nayak S.K. and Mohanty A.K.
(2001) ‘The Influence of Fibre Treatment on the Performance of CoirPolyester Composites’, Composite Science and Technology, Vol. 61,
pp.1303-1310.
97.
Sanjay K. Mazumdar (2002) ‘Composite Manufacturing: Materials,
Product, and Processing Engineering’, CRC Press, Boca Raton.
98.
Sapuan S.M., Leenie A., Harimi M. and Beng Y.K. (2006)
‘Mechanical Properties of Woven Banana Fiber Reinforced Epoxy
Composites’, Materials and Design, Vol. 27, pp. 689-693.
99.
Scida D., Aboura Z., Benzeggagh M. L. and Bocherens E. (1999) ‘A
Micromechanics Model for 3D Elasticity and Failure of Woven-fiber
Composite Materials’, Composites Science and Technology, Vol.59,
pp.505-517.
100.
Seema Jain and Rakesh Kumar (1992) ‘Mechanical Behavior of
Bamboo and Bamboo Composites’, Journal of Material Science,
Vol.27, pp.4598-4604.
101.
Seema Jain, Jindal U.C. and Rakesh Kumar (1993) ‘Development and
Fracture Mechanism of the Bamboo/Polyester Resin Composite’,
Journal of Material Science Letters, Vol.12, pp. 558-560.
102.
Shah A.N. and Lakkad S.C. (1981) ‘Mechanical Properties of JuteReinforced Plastics’, Fiber Science and Technology, Vol.15, pp. 41-46.
103.
Shankar Singh K., Singh P.N. and Rao R.M.V.G.K. (1991)
‘Hygrothermal Effects on Chopped Fiber/woven fabric Reinforced
Epoxy Composites Part A: Moisture Absorption characteristics’,
Journal of Reinforced Plastics and Composites, Vol. 10, pp. 446-456.
216
104.
Shankar Singh K., Singh P.N. and Rao R.M.V.G.K. (1991)
‘Hygrothermal Effects on Chopped Fiber/woven fabric Reinforced
Epoxy Composites Part B: Degradation Studies’, Journal of Reinforced
Plastics and Composites, Vol. 10, pp. 457-462.
105.
Sharma S.C., Krishna M., Narasimhamurthy H.N. and Sanjeevmurthy
(2006) ‘Studies on Weathering Behavior of Glass Coir Polypropylene
Composites’, Journal of Reinforced Plastics and Composites, Vol.25,
No. 9 , pp. 925-932.
106.
Shen C.H and Springer G.S (1976) ‘Moisture Absorption and
Desorption of Composites’, Journal of Composite Materials, Vol. 10,
pp. 2-20.
107.
Siow Y.P. and Shim V.W.P. (1998) ‘An Experimental Study of Low
Velocity Impact Damage in Woven Fiber Composites’, Journal of
Composite Materials, Vol. 32, No.12, pp.1178-1201.
108.
Soutis C. and Curtis P. T. (1996) ‘Prediction of the Post-Impact
Compressive Strength of CFRP Laminated Composites’, Composite
Science and Technology, Vol.56, pp. 677-684.
109.
Sreekala M.S., Jayamol George, Kumaram M.G. and Sabu Thomas
(2002). ‘The Mechanical Performance of Hybrid PhenolFormaldehyde-Based Composites Reinforced with Glass and Oil-Palm
Fibres’, Composites Science and Technology, Vol.62, pp.339- 353.
110.
Sugun B.S. and Rao R.M.V.G.K. (2004) ‘Low-velocity Impact
Characterization of Glass, Carbon and Kevlar Composites using
Repeated Drop Tests’, Journal of Reinforced Plastics and Composites,
Vol. 23, No.15, pp.1583-1599.
111.
Sutherland L.S. and Guedes Soarcs C. (1999) ‘Impact Tests on WovenRoving E-glass/Polyester Laminates’, Composite Science and
Technology, Vol.59, pp.1553-1567.
112.
Sutherland L.S. and Guedes Soarcs C. (2005) ‘ Impact on Low FiberVolume, Glass/Polyester Rectangular Plates’, Composite Structures,
Vol. 68, pp. 13-22.
113.
Uma Devi L., Bhagawan S.S. and Sabu Thomas (1997) ‘Mechanical
Properties of Pineapple Leaf Fiber-Reinforced Polyester Composites’,
Journal of Applied Polymer Science, Vol. 63, pp. 1739-1748.
217
114.
Varma D.S., Varma M. and Varma I.K (1985) ‘Coir Fibers II:
Evaluation as Reinforcement in Unsaturated Polyester Resin
Composites’, Journal of Reinforced Plastics and Composites, Vol. 4,
pp.419-431.
115.
Varma I.K., Anantha Krishna S.R. and Krishnamoorthy S. (1989)
‘Composites of Glass/Modified Jute Fabric and Unsaturated Polyester
Resin’, Composites, Vol. 20, No. 4, pp. 383-388.
116.
Whitney J.M. and Nuismer R.J. (1974) ‘Stress Fracture Criteria for
Laminated Composites Containing Stress Concentrations’, Journal of
Composite Materials, Vol.8, pp. 253-265.
117.
Wilczynski A. P. and Lewinski J. (1995) ‘Predicting the Properties of
Unidirectional Fibrous Composites with Monotropic Reinforcement’,
Composite Science and Technology, Vol. 55, pp.139-143.
118.
Yasunobu Hirai, Hiroyuki Hamada and Jang-Kyo Kim (1998) ‘Impact
Response of Woven Glass-Fabric Composites – II. Effect of
Temperature’, Composite Science and Technology, Vol. 58,
pp.119-128.
119.
Yasunobu Hirai, Hiroyuki Hamada and Jang-Kyo Kim (1998) ‘Impact
response of woven glass-fabric composites – I. Effect of Fiber Surface
Treatment’, Composite Science and Technology, Vol.58, pp.91-104.
120.
Yi Xiao and Takashi Ishikawa (2005) ‘Bearing Strength and Failure of
Bolted Composite Joints (Part 1: Experimental Investigation)’,
Composites Science and Technology, Vol. 65, pp. 1022-1031.
121.
Zhou G. (1995) ‘Prediction of Impact Damage Thresholds of Glass
fiber Reinforced Laminates’, Composite Structures, Vol.31,
pp.185-193.
122.
Zhou G. (1996) ‘Effect of Impact Damage on Residual Compressive
Strength of Glass-fiber Reinforced Polyester (GFRP) Laminates’,
Composite Structures, Vol. 35, pp. 171-181.
123.
Zhou G. (1998) ‘ The Use of Experimentally-determined Impact Force
as a Damage Measure in Impact Damage Resistance and Tolerance of
Composite Structures’, Composite Structures, Vol. 4 , pp. 375-378.

AVAILABILITY LIST Prenplants Birch Copse, Haven Road, The

牝仵盡齷圪浦吪丏禸奀圴享]勯b÷ BHARAT SANCHAR NIGAM

Bahujan Samaj Party - Election Commission of India

Raipur conference Brochure EDIT

List of Adjudicating Officers Dated