Magnetic Proximity Switch Catalog Magnetic Guide Sensor Catalog

s y s t e m s
Magnetic Proximity Switch Catalog
Magnetic Guide Sensor Catalog
accurate systems Corporation
4729-3 Chuo,Ina-shi,Nagano 396-0015 Japan
Tel : 81-265-98-7927 FAX : 81-265-98-7926
Oct/2012
1
s y s t e m s
Specification
Magnetic proximity switch MHS-1005
1. General
MHS-1005 is a magnetic proximity switch which utilize a Hall element.
MHS-1005 detects the magnetic field and identify the N pole and S pole. The
outputs generate ON or OFF signal according to the detected magnetic pole.
MHS-1005-N is activated by N pole and MHS-1005-S is activated by S pole.
The operating magnetic field strength is set as 0.5mT and 0.8mT.
2. Specifications
Power supply
: DC+10〜30V Ripple less than 1%
Current consumption: Less than 12mA
: 0.5mT±0.01mT /0.8mT±0.01mT
Activating point
: Less than 0.03mT
Hysteresis
: NPN Transistor Open Collector Output (Normal Open)
Output
: NPN Transistor Open Collector Output (Normal Close)
Withstand voltage DC30V max. Sink current 30mA max.
: Less than 0.3 m second
Response time
: Magnet ( N pole or S pole, depends on the variation No.)
Detection object
: Power supply reverse connect, Output surge voltage
Circuit protection
: LED red
Output indication
: -10 〜+60℃
Operating
temperature
Operating humidity : 10 〜90% RH ( non-icing, non-condensing)
: Less than 0.05mT/10℃
Temperature
Coefficient
Vibration
: 5 G (10〜55Hz)
: 50 G
Shock
: 50g
Weight
: φ5.1 PVC 1m length
Cable
: Brown : Power supply +
: Blue : 0V
: Black : Output
: White : No connection
: IP-65
Enclosure
: 8Kgf.cm
Fastening Torque
3. Wiring
Brown
Black
Blue
2
s y s t e m s
4. Outline dimension
No.
①
Description
Plastic case
②
③
Cable
Nut
Material
Qty
ABS ( Gray for MHS-1005-N ) 1
( Blue for MHS-1005-S )
φ5.1 PVC
(pig tail)
1m
BS ( Nickel plated)
2
5. Installation
MHS-1005 should be installed
away
from
magnetic
field
generating objects such as a
motor to avoid false operation due
to the magnetic field interference.
Since Ferro-magnetic material
such as iron affects the magnetic
field distribution, the activating
range would be changed and
distorted.
To
prevent
this
inadequate operation, the iron
bracket should be kept away from
the tip of the sensor as described
below.
d1=20mm d2=20mm
3
s y s t e m s
6. Ordering Guide
MHS-1005-□-□□-□
Detection pole
N: N pole
S: S pole
Sensitivity
05: 0.5mT
08: 0.8mT
Output
No description: Normal Open
B: Normal Close
4
s y s t e m s
Specification
Magnetic proximity switch MHS-1008
1. General
MHS-1008 is a magnetic proximity switch which utilizse a Hall element.
MHS-1008 detects the magnetic field and identify the N pole and S pole. The dual
outputs generate ON or OFF signal according to the detected magnetic pole.
The operating magnetic field strength is set as 0.5mT and 0.8mT.
2. Specifications
Power supply
: Type V2: DC+24±10% Ripple less than 1%
Current consumption: Less than 19mA
: Type 05: 0.5mT±0.1mT
Sensitivity
Type 08: 0.8mT±0.1mT
: NPN Transistor Open Collector Output (Normal Open)
Output
NPN Transistor Open Collector Output (Normal Close)
Withstand voltage DC30V max. Sink current 30mA max.
: Less than 0.3 m second
Response time
: Magnet ( N pole or S pole)
Detection object
: Power supply reverse connect, Output surge voltage
Circuit protection
: LED red (N pole) , LED green (S pole)
Output indication
: -10 〜+60℃
Operating
temperature
Operating humidity : 10 〜90% RH ( non-icing, non-condensing)
: Less than 0.05 mT/10℃
Temperature
Coefficient
Weight
: 50g
: φ5.1 PVC 1m length
Cable
: Brown : Power supply
: Blue : 0V
: Black : Output ( N pole)
: White : Output ( S pole)
: IP-65
Enclosure
: 8kgf.cm
Fastening Torque
5
s y s t e m s
3. Wiring
4. Outline dimension
No.
①
②
③
Description
Plastic case
Cable
Nut
Material
ABS (black)
φ5.1 PVC
(pig tail)
BS ( Nickel plated)
Qty
1
1m
2
6
s y s t e m s
5. Installation
MHS-1008 should be installed away from magnetic field generating objects such
as a motor to avoid false operation due to the magnetic field interference. Since
Ferro-magnetic material such as iron affects the magnetic field distribution, the
activating range would be changed and distorted. To prevent this inadequate
operation, the iron bracket should be kept away from the tip of the sensor as
described below.
d1=20mm
d2=20mm
6. Ordering Guide
MHS-1008-□-□□-□
Power supply
V2: DC+24V±10%
Sensitivity
05: 0.5mT
08: 0.8mT
Output
No description: Normal Open
B: Normal Close
7
s y s t e m s
Specification
Magnetic proximity switch MHS-1043
1. General
MHS-1043 is a magnetic proximity switch which utilizes a Hall element.
MHS-1043 detects the magnetic field and identify the N pole and S pole. The dual
outputs generate ON or OFF signal according to the detected magnetic pole.
The operating magnetic field strength is set as 0.5mT and 0.8mT.
2. Specifications
Power supply
: DC+10…28V Ripple less than 1%
Current consumption: Less than 15mA
: 0.5mT±0.1mT
Sensitivity
0.8mT±0.1mT
: NPN Transistor Open Collector Output (Normal Open)
Output
Withstand voltage DC30V max. Sink current 30mA max.
: Less than 0.3 m second
Response time
: Magnet ( N pole or S pole)
Detection object
: Power supply reverse connect, Output surge voltage
Circuit protection
: LED red (N pole) , LED green (S pole)
Output indication
: -10 〜+50℃
Operating
temperature
Operating humidity : 10 〜90% RH ( non-icing, non-condensing)
: Less than 0.05 mT/10℃
Temperature
Coefficient
Hysteresis
: Less than 0.3mT
Insulation resistance : More than 100MO
(between signal ground and attachment metal fitting)
: 30g
Weight
: φ3.8 PVC 1m length
Cable
: Brown : Power supply
: Blue : 0V
: Black : Output ( N pole)
: White : Output ( S pole)
: IP-65
Enclosure
Fastening Torque
: 8kgf.cm
Center of detection
pole signal lamp
(MHS-1043U)
(red)
Center of detection S pole signal lamp
(green)
(MHS-1043F)
Resin case (ABS)
8
s y s t e m s
3. Ordering guide
MHS - 1043 - □ - □□
Detection side
Detection sensitivity
Detection side
Detection sensitivity
U
F
05
08
Upper side
Front side
0.5mT
0.8mT
4. Installation
MHS-1043 should be installed in non-ferrous material (aluminum, brass, SUS304, etc.)
and kept away from magnetic field (e.g. motor). In case there is ferrous material
(e.g. iron) near the detection center of the switch, magnetic flux distribution is
disturbed and detection sensitivity is affected. In this case please make the space
around the switch as below.
d1>30mm, d2>20mm
5. Connections (sample)
brown
load
load
black
north pole output
white
south pole output
DC power supply
In case of inductive load connection,
protective circuit must be connected.
(diode: 1A, 100V)
blue
Magnetic detection circuit
9
s y s t e m s
Specification
Guide Sensor UDS-1044
1. General
UDS-1044 is a guide sensor for automated guided vehicles.
UDS-1044 detects the magnetic tape on the route and the plural number of
magnetic switches in the sensor housing turns ON when they detect the
magnetic flux generated by the magnetic tape.
The magnetic switch is allocated by 15 bits for guide and outputs the bit signals
parallely.
2. Specifications
Guide Tape (Rubber Magnet) 0.9 x 50
1) General physical property
Specific gravity
: 3.7
Hardness
: 95 Hs(JIS A) (JIS K6301)
Tensile strength
: 62 kgf/cm2 (JIS K6301)
Extension
: 25%(JIS K6301)
Operating
: -10〜+80℃
temperature
2 ) Magnetic property
Class
: Anisotropy
Residual magnetic : 0.24〜0.25T (2400〜2500G)
flux(Br)
Coercive force(BHC) : 2150〜2300 Oe
Magnetizing
: Magnetize equally in the direction of thickness
direction
Magnetic Induction Sensor
Power supply
: DC+24V±10% Ripple less than 1%
Current
: Less than 130mA
consumption
Sensitivity
: 0.5±0.1mT (N pole)
Output
: NPN Transistor Open Collector Output (Normal Open)
Withstand voltage DC50V max. Sink current 50mA max.
Output ON voltage : Less than 0.5V
Response time
: Less than 0.3 m second
Detection object
: 0.9 x 50 guide tape (N pole)
Hysteresis
: Less than 0.03mT
Installation position : 20mm (between guide tape surface and sensor detection
side)
Operating range
:10〜35mm
Circuit protection
:Power supply reverse connect, output surge voltage
Temperature
: Less than 0.04mT/10℃
coefficient
10
s y s t e m s
Operating
: -10〜+50℃
temperature
Operating humidity : 10 〜90% RH ( non-icing, non-condensing)
Insulation resistance : More than 100MO (between signal ground and case)
Enclosure
: IP-65
3. Outline dimension
Aluminum plate/t1.5
(Black alumite)
Case (ABS resin)
Flat cable
Polarity
mark
Socket
connector
2-φ6hole
4. Installation
UDS-1044 should be installed away from the magnetic field generating objects. It
should not be installed near a drive motor of the vehicle.
It should be installed in a nonmagnetic bracket. In case there is a magnetic frame
near sensor, the sensor should be kept away from the frame as below.
Magnetic frame
Magnetic frame
11
s y s t e m s
The detection side of the sensor should be set parallel with the surface of
the guide tape.
5. Wiring
Pin No.
1
2
3
4
5
6
7
8
9
10
Connection
NC
No.1 output
No.2 output
No.3 output
No.4 output
No.5 output
No.6 output
No.7 output
No.8 output
No.9 output
Pin No.
11
12
13
14
15
16
17
18
19
20
Connection
No.10 output
No.11 output
No.12 output
No.13 output
No.14 output
No.15 output
NC
NC
Vcc
0V
Input-output connector (male)
Model No.: HIF3BA-20PD-2. 54R-MC (or equivalent)
-Example- Appropriate connecor (female)
Model No.: HIF3BA-20D-2.54R
Key ditch
Socket (male) connector (joint side)
12

Download Report