500 mW CW 860nm VCSEL Array on Surface

500 mW CW 860nm VCSEL Array on Surface Mount Carrier
Part # PCW-SMV-0500-W0860
• Vertical-Cavity Surface-Emitting Laser technology
• Very high reliability
• Narrow spectral width (<1nm typ.)
• Easily soldered to carrier / heat-exchanger
• Optional integrated diffusers are available
Optical & Electrical Characteristics
PARAMETER
CW Output Power
Threshold current
Operating current
Operating voltage
Differential resistance
Slope efficiency
Conversion efficiency
Center wavelength
Spectral width (FWHM)
Wavelength shift
N.A. (4-sigma)
Emission area
CONDITIONS
MIN
2A, 20C Heat-sink
500
20C Heat-sink
-500 mW, 20C Heat-sink
-500 mW, 20C Heat-sink
-500 mW, 20C Heat-sink
-20C Heat-sink
1
500 mW, 20C Heat-sink
35
500 mW, 20C Heat-sink
850
500 mW, 20C Heat-sink
-20C Heat-sink
-500 mW, 20C Heat-sink
----
TYP
700
0.5
1.25
1.8
130
1.1
45
860
0.8
-0.15
0.4 x 0.4
MAX
-1
2.5
2.1
200
--870
1.5
0.070
0.2
--
UNIT
mW
A
A
V
mΩ
W/A
%
nm
nm
nm/oC
-mm2
Maximum Absolute Ratings
PARAMETER
Forward current
Reverse current
Operating temperature
Storage temperature
CONDITIONS
10A
25µA
0 to +80 oC
-40 to +80 oC
Ordering information
PCW - SMV - 0500 - W0860
Package type
Wavelength (nm)
CW Output Power (mW)
Voice: (609) 584-9696 * Fax: (609) 584-2448 * E-mail: [email protected] * www.princetonoptronics.com
Princeton Optronics, Inc. * 1 Electronics Drive * Mercerville, New Jersey 08619
Mechanical Characteristics
PARAMETER
Package width
Package length
Package height
Light emitting area
Max solder temperature
VALUE
3 +/-0.1 mm
3 +/-0.1 mm
0.3 +/-0.1 mm
0.4mm x 0.4mm
260 oC
Copyright © 2013 Princeton Optronics, Inc.
All Rights Reserved.
Princeton Optronics reserves the right to change
product design and specifications at any time without
notice.
No license is granted by implication or otherwise under
any patents or patent right of Princeton Optronics.
No responsibility is assumed for the use of these
products, nor for any infringement on the rights of
others resulting from the use of these products
Laser diode product components are intended for use in a
user-devised end system. However, these products are
capable of emitting Class IV radiation. Extreme care must
be exercised during their operation. Only persons familiar
with the appropriate safety precautions should operate a
laser product. Directly viewing the laser beam or
exposure to specular reflections must be avoided.
Serious injury may result if any part of the body is
exposed to the beam. The eye is extremely sensitive to
the infrared radiation and therefore, proper eye-wear must
be worn at all times. Use of optical instruments with these
products may increase eye hazard. Always wear eye
protection when operating.
REV.A – 03/11
Voice: (609) 584-9696 * Fax: (609) 584-2448 * E-mail: [email protected] * www.princetonoptronics.com
Princeton Optronics, Inc. * 1 Electronics Drive * Mercerville, New Jersey 08619
Voice: (609) 584-9696 * Fax: (609) 584-2448 * E-mail: [email protected] * www.princetonoptronics.com
Princeton Optronics, Inc. * 1 Electronics Drive * Mercerville, New Jersey 08619