S12 LED WM 2E Tech Sheet

BUY AMERICAN ACT OF 2009 COMPLIANT
Series 12 LED WM Indirect/Direct - 2E Technical Sheet
try B
us
10
Date
st
e
In
d
FINELITE
Project
Year
LED Warranty
Type
Comments
Diffuse Center
Optic Shown
Signal White is standard finish
DESCRIPTION
Series 12 WM-ID LED is an Indirect/Direct LED luminaire with classic curved shape and
diffuse center optic. The luminaire uses mid-powered LEDs for long life and enhanced
performance. Series 12 WM-ID LED is available with standard flat endcap or optional
extended diecast aluminum endcap.
Standard Output
2.5"
High Output
6.30"
DIMENSIONS / LIGHT ENGINE:
ENDCAP SELECTION:
TWO LUMEN PACKAGES
LED light engine uses mid-powered LEDs positioned to
deliver excellent distribution for the uplight and downlight.
S12 LED Wall Mount is available with standard
flat endcap on optional curved diecast endcap.
Available in Standard Output and High Output
lumen packages.
ORDERING GUIDE
Sample Number: S12 WM-ID LED - DCO - 32' - 2E - SO - 3500K - FTO - SC - 277 - FA - FE - OBO
S12 WM-ID
Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Please visit www.finelite.com for most current data.
Form CTK0133. 12/14
Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • 510 / 441-1100 • Fax: 510 / 441-1510 • www.finelite.com
© 2014 FINELITE, INC. ALL RIGHTS RESERVED.
Finelite Series 12 WM-ID LED
Shielding (DCO, WCB, PLV)
Size (4', 8' multiples standard)
Light Engine System (2E - 2 Light Engine)
Light Engine Output (SO - Standard Output, HO - High Output)
LED Color Temperature (3000K, 3500K, 4000K)
Uplight Optic Option (Open - Standard, FTO - Frosted Top Optic, CTO - Clear Top Optic)
Circuiting (SC - Single Circuit, MC - Multi-Circuit)
Voltage (120V, 277V)
Mounting (MB - Standard, SUR - Surface Mount, SO - Standoff Mount)
Endcap (FE - Flat, CE - Curved Endcap)
Integrated Sensors (OBD - Daylight, OBO - Occupancy, OBB - Both)
BUY AMERICAN ACT OF 2009 COMPLIANT
FINELITE
Series 12 LED WM Indirect/Direct - 2E Technical Sheet
SPECIFICATIONS
CONSTRUCTION: Body is 20-gauge die-formed steel
with 18-guage die-formed internal joiner system. Plugtogether wiring standard. All components are
hard-tooled to tolerances of +/- 0.010".
ENDCAPS: (FE) Flat Endcap standard, 20-gauge dieformed steel, adds 0.1" at each end. Optional: (CE) Curved
Endcap, aluminum die-cast endcap with 0.100" reveal,
adds 5.0" at each end.
UPLIGHT TOP OPTICS: 2E optical system is open standard. Optional Frosted Top Optic (FTO) and Clear Top
Optic (CTO).
LUMEN PACKAGES: Series 12 WM-ID LED - 2E is available with Standard Output (SO) and High Output (HO)
lumen packages. 3000K, 3500K, and 4000K.
SHIELDING OPTIONS:
DCO
WCB
PLV
Diffuse Center Optic, 73% transmissive, 99%
diffusion.
White Cross Blade Baffle, 87 cell baffles
spaced 0.5" apart and finished with 96%
reflective white paint.
Parabolic Louver, semi-specular louvers
with straight edges, spaced approximately
1.2" apart.
LIGHT ENGINE: Light engine is made up of mid-powered
LEDs and is designed to distribute heat properly to maximize the life of the LEDs. Light distribution delivers
effective uplight and downlight distribution with an even
illumination on the Diffuse Center Optic (DCO).
LED COLOR TEMPERATURE: Available in 3000K, 3500K,
and 4000K. CRI: 83+
DRIVER: High performance Constant Current
Reduction (CCR) driver standard. Can be wired as
dimming or non-dimming. Dimming is compatible with
0-10V controls with a range of 10%-100%. Driver is
fully accessible from below the ceiling. Power Factor:
≥0.9. Total Harmonic Distortion (THD) <20%. Expected
driver lifetime: 100,000 hours.
ELECTRICAL: 120V or 277V prewired. Fixture and electrical components are ETL listed conforming to UL
1598 in the U.S.A., and Canada; ETL listed to certified
CAN/CSA C22.2 No. 250.0. In accordance with NEC
Code 410.73 (G), this luminaire contains an internal
driver disconnect.
Emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring. Optional low
profile battery pack available. Battery pack delivers
1600 lumens. Minimum luminaire length for battery
pack: 8’.
INTEGRATED SENSORS: S12 WM-ID LED
can be specified with integrated PIR
Daylight Occupancy
Sensor (Passive Infared) occupancy sensors or
Sensor
daylight sensors. Refer to Occupancy Sensor and
Daylight Sensor tech sheets for more info.
MOUNTING OPTIONS: Standard (SUR) Surface Mount,
fixture is bolted directly into existing wall studs. Optional
(SO) Standoff Mount, fixture hangs from tapered
mounting bracket fastened to wall at fixture ends and
joints. Standoff bracket measures 4.5" wide, 6.0" tall,
and 0.5" deep. Fixture hangs 0.5" from wall. Feed goes
through mount to vertical J-box. Optional (MB)
Mounting Bracket, fixture hangs from bracket fastened
directly to wall. Mounting bracket in 4', 8' lengths.
Fixture hangs 0.5" from wall. Mounting bracket is
concealed behind fixture.
FEED: Standard with one-18 gauge/5 conductor single
circuit feed controlling uplight and downlight together
(power and dimming). Specify dual feeds for independent
control of uplight and downlight. 14 gauge feed cord used
when fixture current exceeds 5 amps.
FINISHES: Finelite Signal White standard. Optional
Adders: 185 colors available from Tiger Drylac’s RAL color
chart.
LUMEN MAINTENANCE: Series 12 WM-ID LED is rated
to deliver 90% lumen maintenance (L90) to 100,000
hours and 70% lumen maintenance (L70) to 187,000
hours.
LENGTHS: 4' and 8' section lengths can be combined to
make longer runs. Contact factory for additional lengths.
LABELS: Fixture and electrical components are ETL
listed conforming to UL 1598 in the U.S.A., and
Canada; ETL listed to certified CAN/CSA C22.2 No.
250.0. Fixtures will bear ETL labels.
WEIGHT: Fixture weight = 2.6 to 3.6 lb/ft. with curved
endcaps. Fixture weight 2.0 lb/ft. with flat endcaps.
WARRANTY: Series 12 WM-ID LED comes standard with
a 10-Year warranty on all components.
© 2014 FINELITE, INC. ALL RIGHTS RESERVED.
Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Please visit www.finelite.com for most current data.
Form CTK0133. 12/14
Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • 510 / 441-1100 • Fax: 510 / 441-1510 • www.finelite.com

Download Report