lsi greenlee 101 series inground well light

LSI GREENLEE 101 Series
inground well light
Lamp Types: Metal Halide and
Incandescent lamps must be ordered
separately.
Housing: 101A housing is die cast,
low copper aluminum alloy. Lens
retainer matches housing.
ballast enclosure: 101 Series
requires a remote ballast for HID
Lamps. Either an AG Above Grade
or CF composite, grade level, ballast
enclosure.
Finish: Aluminum fixture has a black
polyester powder coat finish.
DIMENSIONS
Grill: Round directional aluminum, die
cast of low copper aluminum alloy
with powder coat finish in satin verde
green, bronze, or black. Optional Walk
over cover is available.
10”
(254mm)
Lens: Convex, tempered, heat resistant
borosilicate glass.
.31” (8mm)
Lampholder: Glazed porcelain,
medium base, 4KV pulse-rated with
spring center contact.
Fasteners: All exposed fasteners are
stainless steel.
Wiring: Pre-wired with 12' of STWA
cord. Cord entry is sealed with a
corrosion proof connector with a
neoprene grommet. An
internal anti-siphon barrier, unique to
LSI GREENLEE, eliminates siphoning
through fixture wires.
Well Sleeve: Housing is suspended
inside a heat and corrosion resistant
polypropylene sleeve which measures
9" in diameter and 18" in depth.
Testing: Each 101 Series housing is
pressure tested with 20 pounds of
air pressure before it is certified and
shipped.
EXTRA VALUE FEATURES:
• Corrosion resistant, low copper
aluminum alloy housing.
• Internal Anti-Siphon Barrier
• Twelve foot long power cord.
Optics/Aiming: RFL optics require self
reflectorized lamps. Housing can be
tilted up to 15° from vertical, inside
the well sleeve, for aiming purposes.
Grill/Housing assembly can be rotated
360° for aiming. Entire luminaire can
be buried at an angle if increased tilt
is desired.
18”
(457mm)
ARRA
Funding Compliant
wet location
Optics
*
OUTDOOR
360º
RFL
RFL
MH
MH39,
70,PAR30L
100 R-40
70,50100
PAR38
MV
R-30
100,PAR38
175 R-40
INC150
150Spread
R-40 Depends on Lamp
*INC
Beam
* Depends On Lamp
Tilt
to 15°
Tilt:up15º
Project Name
260
Catalog #
Fixture Type
02/05/14
© 2014
LSI INDUSTRIES INC.
LSI GREENLEE 101 Series
inground well light
LUMINAIRE ORDERING INFORMATION
TYPICAL ORDER EXAMPLE:
Luminaire
Prefix
101A RFL BRz G
Luminaire
Finish
Optics1
WOC
Grill
101A
RFL – Self Reflectorized Lamps: BRZ – Bronze G – Round Directional
Grill/Aluminum
(Aluminum) PAR30, PAR38
BLK – Black
MH- Up to 100 watts
SVG - Satin
Verde
Green
CFF 100
120
Wattage Lamp 4 Voltage
Accessories
Ballast 2
J35AF – See J-Boxes
J35BF – See J-Boxes
J55AF – See J-Boxes
WOC – Walkover Cover
AG – Above Grade
CFF –Composite
Buried Box with
Flat Lid3
FOOTNOTES:
1- HID fixtures require a ballast.
2- Remote ballasts with ignitors have limited starting distances. See Accessory section of catalog for further information.
NOTE: Coated lamps operate at higher temperatures than clear lamps. Their use is NOT recommended in well lights.
MH
50
70
100
MH
BRz TR
Ballast
Finish
Options
BRZ – Bronze TR – Tamper Resistant
120
Fasteners (CF enclosures only)
BLK – Black
208
– Order TR Key separately
SVG - Satin
240
Verde
277
Accessories
Green
MT
(AG Only) TR Key – Key for TR
(Multi Tap)
Fasteners
3- For additional grade mounted ballasts, please see data sheets for Greenlee
accessories and Greenlee ballast enclosures.
4- LAMP NOT INCLUDED WITH FIXTURE. ORDER SEPARATELY. See Lamp guide for
additional information.
ACCESSORIES/OPTIONS
Above Grade Ballast Box (AG)
Composite Box w/ Flat Lid (CF)
Installation
AG Ballast
Enclosure
CF Ballast
Enclosure
All wiring to meet local, state,
and national electric codes.
Rigid Conduit
(by others)
Flexible Conduit
(by others)
Project Name
Catalog #
Fixture Type
02/05/14
© 2014
LSI INDUSTRIES INC.
261

Download Report