THIS TECHNICAL INFORMATION IS FOR REFERENCE ONLY Drill Pipe Performance Characteristics Sheet THIS TECHNICAL INFORMATION IS FOR REFERENCE ONLY Drill Pipe Performance Characteristics SheetAB T2P 2G1 PTECH Tubulars Canada, Ltd. | PO Box 6896 Stn D, Calgary, PTECH Drilling Tubulars, LLC 13618 Poplar Circle Jim Dokter - President 403.819.6279 Mat Rolfes - Operations Manager 780.264.2337 Pipe Size and Weight: 4 1/2 16.60 IEU Pipe Size and weight: 4 1/2 16.60 IEU Pipe Pipe Grade: S-135 S-135 Grade: Range:2 Range: 2 Tool Joint: X 5 1/4 Tool Joint: 5 1/4 3 X 3 PTECH43+ PTECH43+ Suite 302 Conroe, TX 77304, U.S.A. Phone: (936) 760-3600 Fax: (936) 521-5130 Revision 3 Pipe Body New-API New-95%RBW Premium OD (in) 4.500 4.500 4.365 Wall Thickness (in) 0.337 0.362 0.270 ID (in) 3.826 3.775 3.826 Calculated Plain End weights (lbs/ft) 14.976 16.002 11.787 Note: Premium properties are calculated based on uniform OD and wall thickness. Cross sectional area pipe body (in 2) 4.407 4.709 3.469 Cross sectional area OD (in 2) 15.904 15.904 14.966 Cross sectional area ID (in 2) 11.497 11.195 11.497 Section Modulus (in 3) 4.271 4.514 3.347 Polar Section Modulus (in 3) 8.543 9.027 6.694 Torsional Strength (ft-lbs) Tensile Strength (lbs) New-API 55,500 595,000 New-95%RBW 58,600 635,700 Premium 43,500 468,300 80% Torsional Strength (ft-lbs) 44,400 46,900 34,800 Pressure Capacity (psi) Collapse Capacity (psi) 17,693 18,706 19,019 19,987 16,176 10,959 Tool Joint PTECH43+ OD (in) ID (in) Tool Joint with a Material Yield Strength of 135000 psi Pin Tong length (in) Box Tong length (in) Torsional Strength (ft-lbs) Recommended Make-up Torque (ft-lbs) Min Recommended Make-up Torque (ft-lbs) Balance OD (in) Tensile Strength (lbs) Tool joint/Drill pipe torsional ratio (New pipe) Tool joint/Drill pipe torsional ratio (95% New pipe) Tool joint/Drill pipe torsional ratio (Prem pipe) Min OD for premium class (in) Drill Pipe Assembly with PTECH+ Tool Joint 5 1/4 3 13 15 46,760 28,100 25,300 5.251 819,000 0.84 0.80 1.07 4.969 Drill Pipe Bend Radius * These calculations are based on new pipe with nominal wall API Adjusted weight (lbs/ft) 95% Adjusted weight (lbs/ft) Approximate length (ft) 18.11 19.06 31.85 95%Fluid Displacement (gal/ft) API Fluid Displacement (gal/ft) Fluid Capacity (gal/ft) 0.291 0.277 0.572 Drift Size 2.875 Based on Bending Stress (psi) at Pipe OD 15,000 Radius of Curvature ( R ) (ft.) (@ OD of pipe) 375.0 BUR (dogleg) deg/100 ft. 15.3 This Performance Sheet was generated by Nels Wickander . 10/1/2014 TORQUE TENSION COMBINED LOAD CURVE For PTECH43+ 5 1/4 X 3 Tool Joint with a Material Strength of 135000 psi, using a Coefficient of Friction factor of 0.08 and a Safety Factor of 1.0. On Pipe: 4.5 16.60 S-135 Premium Class. Pin Yield Shoulder Sep Pipe Torque Applied Tensile Load (lbs) 900,000 800,000 700,000 600,000 500,000 400,000 300,000 200,000 100,000 0 0 3,525 7,050 10,575 14,100 17,625 21,150 24,675 28,200 31,725 35,250 38,775 42,300 45,825 Applied Torque (ft-lbs) THIS TECHNICAL DATA IS FOR REFERENCE ONLY. PTECH Drilling Tubulars, LLC. 10/1/2014 PTECH43+ 5 1/4 X 3 TOOL JOINT OD WEAR CURVE PTECH43+ with 3 ID 80% 4.500 16.60 S-135 Prem MUT 50,000 45,000 Torsional Strength (ft-lbs) 40,000 35,000 30,000 25,000 20,000 15,000 10,000 5,000 0 PTECH43+ with 3 ID 5.25 5.23 5.22 5.20 5.19 5.17 5.16 5.14 5.13 5.11 5.09 5.08 5.06 5.05 5.03 5.02 5.00 4.98 4.97 4.95 4.94 4.92 4.91 4.89 4.88 46761 46100 45442 44786 44133 43484 42837 42192 41551 40912 40276 39643 39013 38385 37760 37138 36519 35902 35288 34677 34069 33463 32860 32260 31663 80% 4.500 16.60 S-135 Prem 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 34760 MUT 28,05727,66027,26526,87226,48026,09025,70225,31524,93024,54724,16623,78623,40823,03122,65622,28321,91121,54121,17320,80620,44120,07819,71619,35618,998 Tool Joint Box OD (in.) THIS TECHNICAL DATA IS FOR REFERENCE ONLY. PTECH Drilling Tubulars, LLC. 10/1/2014
© Copyright 2024 ExpyDoc
