Price list effective from
01 January 2014
TECNO 2 S.r.l.
1
TECNO 2 SRL
Strada del Cascinotto 139/43 - 10156 Torino (TO) - ITALY - Tel. +39 011 8224969 Fax +39 011 8225073
www.tecno2.com [email protected]
ADVANCED INNOVATION TECHNOLOGY
PRICE LIST
EFFECTIVE JANUARY 2014 - DECEMBER 2014
Prices quoted are correct at date of print but may change without notification.
Many Advance Innovation Technology products are sold for competition use only & TECNO 2 can
not be held responsible for any use against the law of the land or damage caused by
poor or incorrect fitting which may affect any vehicle manufacturer warranty.
Goods supplied incomplete or inoperative upon receipt will be completed or
exchange within 8 working days f.o.c. upon receipt of the defective parts and
relevant paperwork / invoicing.
CHAPTERS INDEX
[1:0]
[2:0]
[3:0]
[4:0]
[5:0]
BRAKES PARTS
DRIVE CLUTCH DISCS AND ASSEMBLY COVERS
HOSE AND FITTINGS
COMPONENTS
SPECIAL ENGINE PARTS
SECTIONS INDEX
[1:0]
BRAKES PARTS
[1:1]
COMPETIZIONE brake discs for gr.N and performance cars.
Pag. 2
[1:2]
Brakes pedal box and adjustable valves, hand brake lever kit, balance bar and Tilton and
Pag. 2
A.I.TECH., GIRLING master cylinder, historic GIRLING racing calipers
[2:0]
DRIVE CLUTCH DISCS AND ASSEMBLY COVERS
[2:1]
ADVANCED INNOVATION TECHNOLOGY
Pag. 3
[2:2]
[2:3]
A.I.TECH. Fibre spring hub discs
A.I.TECH. Special reinforced clutch covers
Pag. 5
Pag. 5
[3:0]
[3:1]
[3:2]
[3:3]
[3:4]
[3:5]
[4:0]
[4:1]
[4:2]
[4:3]
[4:4]
[4:5]
[4:6]
[5:0]
[5:1]
[5:2]
[5:3]
[5:4]
[5:5]
HOSE AND FITTINGS
Hoses
Fittings A.I.TECH. & Speedflow
A.I.TECH Nipples: adapters .
Quick disconnecting fittings
Oil radiator PWR
Pag. 6
Pag. 6
Pag. 7
Pag. 8
Pag. 9
COMPONENTS
A.I.TECH. LIGHT wheel spacers
A.I.TECH. NUTS STUDS and BOLTS for wheels
Special DASHBOARD ,GAUGES, gauge pods, Odyssey and Energa battery
A.I.TECH. Steering wheel quick release boss,Steering Wheels, Rainlight and Tow Hooks
A.I.TECH. Air-Jack, Quick lift and Steering Box
A.I.TECH. Thermal insulating materials,Acoustical Mat and ducting hose
Pag. 9
Pag. 9
Pag. 11
Pag. 13
Pag. 13
Pag. 14
SPECIAL ENGINE PARTS
A.I.TECH. Special head bolts
SPESSO Special head gaskets
A.I.TECH. BLOW OFF valves
Fuel and oil line accessories
ADVANCED INNOVATION TECHNOLOGY Silicone hoses
Pag. 15
Pag. 15
Pag. 17
Pag. 17
Pag. 18
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
TECNO 2 S.r.l.
Price list effective from
01 January 2014
2
[1:0] BRAKES PARTS
[1:1] "COMPETIZIONE" brake discs for gr.N and performance cars.
The Advanced Innovation Technology "COMPETIZIONE" brake discs are both balancing intern of the outside diameter and the inside of the
discs to give the better performance. These discs has high temperature heat treatment no drills no grooved. They're produced to replace the
standard O.E. brake rotors.(Group "N" specs.). Are made to be used with High Performance Brake Pads like ferodo Racing, Pagid, Carbon
Metal.
We do have a special production of brake pads for fast road applications also . These discs are drilled & grooved, Please visit the on-line
Catalogue to http://www.tecno2.com/webroot/downloads/catalogo_dischi_freno_2009_.xls
[1:2] Brakes pedal box and adjustable valves, hand brake lever kit,
balance bar and GIRLING master cylinder, historic GIRLING racing calipers
Description
Double master cylinder pedal box
Double master cylinder pedal box For servo-brake
Double master cylinder pedal box
Double master cylinder pedal box kit (master cylinder + Fittings)
Double master cylinder pedal box for servo-brake kit (master cylinder + fittings)
Double master cylinder pedal box kit (master cylinder + fittings)
Historical and classic car pedal boxes with three different balance bar
Universal Pedal Box 3 steel pedal
€
€
€
€
€
€
€
(ab) €
EURO (c)
360,82
394,12
429,65
642,81
660,57
688,33
200,59
327,73
AIT-C52/11
Universal Pedal Box 3 aluminum pedal , adjustable
(ab) €
297,25
AIT-C52/11F
Universal Pedal Box 3 aluminum pedal , adjustable, flat base
(ab) €
297,25
AIT-C52/11-KIT
Universal Pedal Box 3 aluminum pedal Set, completed with AIT-BLC10 + AIT-CR110
AIT-C52/11F-KIT
AIT-C55/08
AIT-C55/REV
AIT-C60
AIT-C60/REV
AIT-BLC50
AIT-BLC10
AIT-C50BR
AIT-C50CL
AIT-C50AC
AIT-CR110
T90-1000
T90-1003
T90-2000
T90-2003
T90-1100
AIT-LEVA08
AIT-LEVERT08
AIT-LEVA-U
AIT-LEVA08-KIT
AIT-LEVERT08-KIT
AIT-TANDEM08
AIT-REV11
AIT-REV11/KIT
Universal Pedal Box 3 alum. pedal (flat base) Set, completed of AIT-BLC10 + AIT-CR111 (b)
Universal Ergal alloy adjustable 3 pedals assembly 2008 model.
(b)
Throttle pedal inverter for front engine cars for AIT-C55/08
(b)
3 pedal assembly overhug.
(b)
Throttle pedal inverter for front engine cars for AIT-C60
(b)
A.I TECH balance bar swivel for AIT-C50
A.I TECH balance bar swivel
Spare brake pedal for AIT-C50
(ab)
Spare clutch pedal for AIT-C50
(ab)
Spare trottle pedal for AIT-C50
(ab)
Remote brake billet aluminum adjuster 2mt (exagonal shape)
Lever-Type prop. Valve AN3 & 3/16 inverted flare
Lever-Type prop. Valve 10mm x 1.0 female
Screw-Type prop. Valve AN3 & 3/16 inverted flare
Screw-Type prop. Valve 10mm x 1.0 female
Restoration Kit for reference T90-1000/T90-1003/T90-2000/T90-2003
Steel hand brake lever with support (Incorporating handbrake cable attachment m.y.2008 )
Steel hand brake lever with metal support vertical hand
Rod joint connection between master cyl.and lever for AIT-LEVERT08 and LEVERT08-KIT
AIT-LEVA08 with master cylinder+fittings
AIT-LEVERT08 with master cylinder+fittings
Steel hand brake lever for Tandem master cylinder ( Incorporating handbrake
cable attachment m.y. 2008 )
Special Aluminum alloy (Ergal) made Reversable hand brake lever, it can be used in vertical position
or in horizontal position (depending on how you need it fixed in the car )
AIT-REV11 with master cylinder+fittings
AIT-DUOREV/12
AIT-ALUFORK
GIR625LT
GIR625WT
GIR700LT
GIR700WT
GIR750LT
GIR750WT
GIR-S.BASSO
Ref.
AIT-C16
AIT-C26
AIT-C36
AIT-C16-KIT
AIT-C26-KIT
AIT-C36-KIT
AIT-C24
AIT-C50
(b)
€
538,13
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
538,13
1.067,30
131,94
1.070,52
131,94
110,47
113,41
86,60
74,38
74,38
128,78
119,70
119,71
119,71
119,71
21,96
110,47
99,81
19,43
232,59
241,47
154,87
€
€
149,65
293,15
Double master cyl. steel made hand brake lever
€
194,45
Ergal alloy fork to suit master cylinder to thr system
Girling master cylinder .625" diam. less tank
Girling master cylinder .625" diam. with tank
Girling master cylinder .700" diam. less tank
Girling master cylinder .700" diam. with tank
Girling master cylinder .750" diam. less tank
Girling master cylinder .750" diam. with tank
Girling brake & clutch fluid reservoir
€
€
€
€
€
€
€
€
19,50
98,74
101,64
98,74
101,64
98,74
101,64
39,06
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
3
Ref.
GIR-S.ALTO
GIR-RIC
GIR-D12
GIR-D14
GIR-AR3
GIR-AR4
AIT-C59
AIT-C59/P
AIT-BV08
AIT-BV08-KIT
AIT500
Description
Girling brake & clutch fluid reservoir
Girling brake & clutch fluid reservoir membrane
Girling small 2 piston monobloc Caliper for solid disc 254mm x 9,65mm (Wt. 1,18Kg.)
Girling small 2 piston monobloc Caliper for solid disc 254mm x 9,65mm (Wt. 1,16Kg.)
Girling medium 2 piston monobloc Caliper for solid disc 266,7mm x 11,11mm (Wt. 1,77Kg.)
Girling medium 2 piston monobloc Caliper for ventilated disc 267mm x 21mm (Wt. 1,77Kg.)
Brake & clutch fluid reservoir (120 c.c. dimensions diameter 50mm x hight 107mm, 120cc)
Plug for AIT-C59
Brake line valve (only 125 gr. 3/8JIC threads) with bolts kit.
Brake line valve with 2 x fittings SP250-03 and 2 x washers E177003
Tee Junction 10x1 Fem-Fem-Fem with bolts kit.
CASTROL-SRF
Brake fluid 1Lt.
€
€
€
€
€
€
€
€
(b) €
(b) €
€
EURO (c)
45,23
16,45
643,50
643,50
463,00
650,00
44,41
8,32
100,83
117,51
21,07
€
EURO (a)
60,00
[2.0] DRIVE CLUTCH DISCS AND ASSEMBLY COVERS
[2:1] ADVANCED INNOVATION TECHNOLOGY
ADVANCED INNOVATION TECHNOLOGY is a TECNO 2 trade name. Clutches are manufactured to a TECNO 2 design to
meet the demands of the driver who does not require an ultimate specification or expence of full competition components
A.I.TECH. drive discs & covers are ideal for private entrants in national rally & race applications.
Sprung clutch discs for fast road use, solid clutch discs for competition.
Ref.
Description
O.D.
SPLINE
160mm
170mm
170mm
180mm
180mm
180mm
190mm
190mm
190mm
200mm
200mm
215mm
215mm
230mm
234mm
190mm
17mmx20s
17mmx20s
19mmx17s
17mmx20s
19mmx17s
23mmx20s
19mmx17s
23mmx20s
17mmx20s
23mmx20s
19mmx17s
23mmx20s
19mmx17s
23mmx20s
23mmx20s
25,4mmx23s
€
€
€
€
€
€
€
€
€
€
€
€
180mm
200mm
200mm
200mm
215mm
230mm
21mmx18s
17mmx20s
21mmx18s
59mmx14s
21mmx18s
21mmx18s
€
€
€
€
€
€
190mm
200mm
200mm
215mm
215mm
228mm
228mm
18,5mmx14
18,5mmx14s
25mmx14s
21mmx24s
25mmx14s
21mmx24s
25mmx14s
180mm
190mm
190mm
200mm
200mm
215mm
215mm
17mmx20s
17mmx20s
22mmx26s
22mmx26s
24mmx21s
22mmx26s
24mmx21s
FIAT-LANCIA
AIT10160
AIT10170
AIT10171
AIT10180
AIT10181
AIT10182
AIT10190
AIT10191
AIT10192
AIT10200
AIT10201
AIT10215
AIT10216
AIT10230
AIT10232
AIT10193
AIT20180
AIT20181
AIT20200
AIT20202
AIT20215
AIT20230
AIT30190
AIT30200
AIT30201
AIT30215
AIT30216
AIT30225
AIT30228
AIT40180
AIT40190
AIT40191
AIT40200
AIT40201
AIT40215
AIT40216
FIAT- 500 annni 70
FIAT-AUTOBIANCHI-CINQUECENTO
FIAT
FIAT-CINQUECENTO SPORTING/600 SP.
FIAT
FIAT
FIAT-UNO TURBO untill year 1988
FIAT-UNO TURBO aFter year 1988
FIAT PUNTO SX-ELX 1580
FIAT-UNO T. aFter year 1990-LANCIA
FIAT
FIAT LANCIA
FIAT
FIAT-LANCIA-ALFA ROMEO
FIAT - ALFA
LANCIA DELTA GR.A (bidisco)
PEUGEOT-CITROEN
PEUGEOT 205 1,3 RALLY - 106 RALLY
PEUGEOT
P.205/309-106 1,6 16V-C.SAXO 1,6Lt.16v
PEUGEOT 204 - 304 S
PEUGEOT 309 16V/405
PEUGEOT 206 2000 16V WRC
OPEL
CORSA 1200
OPEL CORSA GSI
OPEL
OPEL KADETT GSI 1,8/2,0
OPEL
OPEL KADETT GSI 16V
OPEL
RENAULT
RENAULT
RENAULT
RENAULT
RENAULT 5 GTT./CLIO 16V/WILLIAMS
RENAULT
REN. MEGANE 2.0lt. 16V/CLIO RS
REN. ALPINE A110
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (cc)
Rigid hub
120,00
132,00 €
132,00 €
140,82 €
134,52 €
134,52 €
138,24 €
142,44 €
143,10 €
170,31 €
170,31 €
174,03 €
NO €
176,04 €
330,00
160,83
Rigid hub
138,30 €
138,30
170,31 €
170,31
171,72 €
191,22 €
Rigid hub
NO €
170,31 €
171,06
176,04 €
NO €
176,91 €
172,47 €
Rigid hub
138,24 €
143,10 €
143,10
170,31 €
171,06 €
184,62 €
184,62
Spring c.
NO
172,86
172,86
176,79
176,79
180,15
178,20
176,79
181,50
208,23
205,41
277,62
261,00
270,00
NO
NO
Spring c.
176,04
NO
203,25
NO
261,00
276,00
Spring c.
185,37
198,93
NO
276,21
261,00
281,22
282,00
Spring c.
167,31
173,22
NO
203,25
207,51
281,34
NO
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
Ref.
Description
4
O.D.
SPLINE
190mm
200mm
215mm
21mmx18s
21mmx18s
25,5mmx24s
180mm
190mm
200mm
210mm
210mm
215mm
225mm
21mmx24s
25,4x24s
21mmx24s
21mmx24s
22,1mmx28s
22,1mmx28s
22,1mmx28s
€
200mm
200mm
200mm
215mm
215mm
21x24s
22,1x28s
25,5x10s
25,5x10s
22x19s
€
€
€
€
€
228mm
22,3X28
€
ROVER
AIT45190
AIT45200
AIT45215
AIT50180
AIT50190
AIT50200
AIT50210
AIT50211
AIT50215
AIT50225
AIT50200
AIT50201
AIT50203
AIT50216
AIT50218
AIT50225
AIT60190
AIT60200
AIT60215
AIT60220
AIT60240
AIT65180
AIT65190
AIT70215
AIT70225
AIT70230
AIT70240
AIT70242
AIT80180
AIT80190
AIT80191
AIT80200
AIT81200
AIT81201
AIT81215
AIT81216
AIT82215
AIT82225
AIT82230
AIT85230
AIT85232
AIT85240
AIT86260
AIT87240
AIT88215
AIT88225
AIT88226
AIT88230
AIT88240
AIT88242
AIT88250
ROVER
ROVER 216
ROVER
VOLKSWAGEN
VOLKSWAGEN
VOLKSWAGEN
VOLKSWAGEN/ALFA ROMEO
VOLKSWAGEN
VOLKSWAGEN GOLF 16V
VOLKSWAGEN
VOLKSWAGEN
ALFA
SUD-33
ALFA ROMEO GTA
GIULIA 1300/1500
ALFA1750-GIULIA 1,3/1,6
ALFA 75 TURBO
SEAT
IBIZA 1,8-2,0
FORD KA
FORD ESCORT RS
FORD RS 2000 MK II
FORD FIESTA/ESCORT TURBO
FORD SIERRA/ESCORT COSW.
INNOCENTI
MINI MINOR
IM3
BMW
BMW316
BMW MINICOOPER
BMW M3 E30
BMW M3 E36
BMW M3 E46
SUZUKI
SUZUKI
SUZUKI 1,3
SUZUKI SWIFT
SUZUKI
HONDA
CIVIC ACCORD 16V
CIVIC 16V
CIVIC V TECH
INTEGRA
MAZDA
MAZDA MIATA
MAZDA 323 GTX
MAZDA
SUBARU
SUBARU IMPREZA
SUBARU NUOVA IMPREZA WRX
SUBARU IMPREZA Sti
TOYOTA
TOYOTA HBT-VM 3000
NISSAN
PATROL TERRANO
MITSUBISHI
MITSUBISHI PAJERO
MITSUBISHI EVO I-II-III
MITSUBISHI
MITSUBISHI EVO IV-V/PAJERO
MITSUBISHI
MITSUBISHI EVO VII
MITSUBISHI
€
€
€
€
€
€
190mm
200mm
215mm
220mm
240mm
19,7x17s
19mmx17s
26mmx23s
19mmx17s
25,4mmx23s
€
€
€
€
€
180mm
190mm
53x32s
53x32s
€
€
215mm
215mm
230mm
240mm
240mm
29mmx10s
28mmx20s
29mmx10s
29mmx10s
35mmx10s
€
€
€
€
€
180mm
190mm
190mm
200mm
20mmx18s
22,2mmx20s
19mmx18s
22,2mmx20s
€
€
€
200mm
200mm
214mm
215mm
22mmX21
22,5mmx20
22,5mmx20
26mmx24
€
215mm
225mm
230mm
24,3mmx22s
22,2mmx20s
24mmx22s
€
€
€
228mm
228mm
240mm
25,5x24s
24,2x24s
25,5x24s
€
€
€
260mm
26mmx23s
241mm
25,5x24s
€
215mm
228mm
228mm
230mm
240mm
240mm
250mm
25,5x24s
25,4x23s
25,4x24s
26x23s
29x14s
25,4x23s
26x23s
€
€
€
€
€
€
€
EURO (cc)
Rigid hub
NO €
170,31 €
NO €
Rigid hub
140,55 €
NO €
171,06 €
178,89 €
186,03 €
177,45
202,92 €
Rigid hub
171,06 €
171,06 €
172,86
195,90 €
195,90 €
Rigid hub
201,09
Rigid hub
147,03
198,00
184,62
171,72
186,03
Rigid hub
144,60
144,60
Rigid hub
173,22
180,36
180,36
212,82
265,50
Rigid hub
140,28
141,69
143,00
NO
Rigid hub
170,31
NO
NO
186,03
Rigid hub
178,89
180,36
180,36
Rigid hub
197,52
197,52
232,07
Rigid hub
NO
Rigid hub
200,34
Rigid hub
189,97
186,03
NO
186,03
186,03
186,03
285,00
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
Spring c.
173,22
203,25
261,00
Spring c.
188,94
188,94
210,39
261,00
261,00
NO
282,00
Spring c.
210,39
210,39
NO
276,96
276,96
Spring c.
282,00
Spring c.
183,50
NO
267,00
NO
317,73
Spring c.
NO
NO
Spring c.
NO
281,22
281,22
327,72
NO
Spring c.
176,79
181,77
183,50
198,00
Spring c.
203,10
183,50
241,79
NO
Spring c.
277,50
277,50
277,50
Spring c.
NO
251,50
280,64
Spring c.
301,35
Spring c.
280,64
Spring c.
330,00
285,81
276,00
285,00
302,37
317,73
NO
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
TECNO 2 S.r.l.
Price list effective from
01 January 2014
5
[2:2] Fibre spring hub discs
This range of A.I.TECH disc is suitable for uprated fast road cars. The disc has stronger take up springs & high
temperature fibre friction material by FERODO. These discs to be used in conjuction with our special reinforced clutch covers.
Ref.
AIT10180PS
AIT10190PS
AIT10191PS
AIT10200PS
AIT10215PS
AIT10230PS
AIT20180PS
AIT20200PS
AIT20215PS
AIT40200PS
AIT40215PS
AIT50210PS
AIT60185PS
AIT60240PS
Description
FIAT-CINQUECENTO SPORTING/600 SP.
FIAT UNO TURBO untill year 1988
FIAT UNO TURBO after year 1988
FIAT UNO TURBO after year 1990
FIAT-LANCIA-ALFA ROMEO
FIAT-LANCIA-ALFA ROMEO
PEUGEOT 1,3 RALLY/AX
PEUGEOT 205/309/106/SAXO VTS
PEUGEOT 309 16V/405/306
RENAULT 5 GTT./CLIO 16V/WILLIAMS
RENAULT MEGANE
VOLKSWAGEN
FORD
FORD
O.D.
180mm
190mm
190mm
200mm
215mm
230mm
180mm
200mm
215mm
200mm
215mm
210mm
185mm
240mm
SPLINE
17mmx20s
19mmx17s
23mmx20s
23mmx20s
23mmx20s
23mmx20s
21mmx18s
21mmx18s
21mmx18s
22mmx26s
22mmx26s
21mmx24s
25,4mmx24s
25,4mmx23s
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (cc)
49,38
50,68
50,68
59,00
71,00
72,26
50,59
69,85
72,26
69,85
71,00
72,53
50,00
76,15
[2:3] Special reinforced clutch covers
These uprated clutch covers are a direct replacement for the standard unit, having a stronger diaphragm giving a 30% extra
clamp load. Best result are obtained when these A.I.Tech. covers are used in conjuntion with the ALCON & A.I.TECH.
drive disc.
Ref.
Description
AIT-160
Clutch cover for FAT 160mm drive disc
AIT-170
Clutch cover for FIAT 170mm drive disc
AIT-180
Clutch cover for FIAT and PEUGEOT 180mm drive disc
AIT-190
Clutch cover for FIAT 190mm drive disc
AIT-200
Clutch cover for FIAT 200mm drive disc
AIT-200A
Clutch cover for PEUGEOT 200mm drive disc
AIT-200B
Clutch cover for RENAULT 200mm drive disc
AIT-200C
Clutch cover for OPEL CORSA 8V 200mm drive disc
AIT-200CC
Clutch cover for OPEL CORSA 16V 200mm drive disc (Standard type flywheel)
AIT-200D
Clutch cover for VOLKSWAGEN 200mm drive disc
AIT-200F
Clutch cover for ALfA ROMEO 200mm drive disc
€
€
€
€
€
€
€
€
€
€
€
EURO (cc)
70,79
77,54
91,02
104,51
126,05
126,05
126,05
133,12
172,82
126,85
158,42
AIT-200AA
Clutch cover for PEUG.106 S16 & CITR.SAXO VTS 200mm drive disc
€
126,05
AIT-200AB
Clutch cover for PEUGEOT/ROVER 200mm drive disc
€
126,05
AIT-200S
AIT-210D
AIT-215
AIT-215A
AIT-215B
AIT-215C
AIT-215D
AIT-215P
AIT-230
AIT-230AR
AIT-230C
AIT-230CC
Clutch cover for SUZUKI 200mm drive disc
Clutch cover for VOLKSWAGEN 210mm drive disc
Clutch cover for FIAT 215mm drive disc
Clutch cover for PEUGEOT 215mm drive disc
Clutch cover for RENAULT CLIO RS-MEGANE COACH 215mm drive disc
Clutch cover for OPEL 215mm drive disc
Clutch cover for VOLKSWAGEN 215mm drive disc
Clutch cover for FIAT PUNTO 215mm drive disc
Clutch cover for FIAT-LANCIA-ALfA ROMEO 230mm drive disc
Clutch cover for ALfA ROMEO 156 230mm drive disc
Clutch cover for OPEL 228mm drive disc
Clutch cover for OPEL 228mm drive disc (Pot type flywheel)
€
€
€
€
€
€
€
€
€
€
€
€
159,29
160,90
128,09
128,08
128,08
128,08
128,08
158,41
158,41
221,22
195,48
195,48
AIT-230D
Clutch cover for VOLKSWAGEN 230mm drive disc
€
207,02
AIT-240
Clutch cover for FORD COSW. 240mm drive disc
€
249,43
AIT-230A/N
Clutch cover for L.DELTA EVO& 16V & A.ROMEO 155 Q4 230mm drive disc
AIT-230M
Clutch cover for MITSUBISHI IV-V 230mm drive disc (only with O.E. returned part)
d.d.
AIT-230S
Clutch cover for SUBARU IMPREZA 230mm drive disc (only with O.E. returned part)
d.d.
AIT-240M
Clutch cover for MITSUBUSHI EVO VII (only with O.E. returned part)
d.d.
AIT-240S
Clutch cover for SUBAUR IMPREZA STI 240mm (only with O.E. returned part)
d.d.
(2011 VERSION)
€
236,00
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
Ref.
Description
AIT-JTD KIT
FIAT-LANCIA JTD clutch assy. Composed by: organic material drive disc,
EURO (cc)
pressure plate cover and release bearing.
AIT-JTD AR KIT
AIT-HDI-P KIT
6
€
288,19
pressure plate cover and release bearing.
€
288,19
PEUGEOT HDi clutch assy. Composed by: organic material drive disc,
pressure plate cover and release bearing.
€
288,19
ALFA ROMEO JTD clutch assy. Composed by: organic material drive disc,
[3:0] HOSE AND FITTINGS
These high quality steel braided hoses are suitable for all fluid applications - oil, fuel, water, air, brake & clutch fluid. This
hose product is used with fittings in 3:2 for workshop assembly.
[3:1] Hoses
Ref.
Description
EURO (c)
E300003
Steel braided, teflon hose - 3 (brakes lines) i.d.3,17mm
€
8,80
E300003G
Steel braided, teflon hose - 3 external black liner (brakes lines) i.d.3,17mm
€
10,37
E300004T
Steel braided teflon hose - 4 (clutches lines & steering box oil lines) i.d.4,76
€
10,42
E300006T
Steel braided, teflon hose - 6 (fuel lines and gear box oil lines) i.d.8,73mm
€
20,41
E300008T
Steel braided, teflon hose - 8 (fuel and engine lines) i.d.3,17mm
€
27,63
E300004
Steel braided, rubber hose - 4 (fuel and engine lines) i.d.5,5-o.d. 11,1mm
€
20,93
E300006
Steel braided, rubber hose - 6 (fuel lines) i.d.8,7-o.d. 13,9mm
€
19,00
SP100-06
E300008
E300010
E300012
E300016
E300020
Steel braided, rubber hose - 6 (fuel lines) i.d.8,7-o.d. 13,9mm
Steel braided, rubber hose - 8 (fuel and engine oil lines) i.d.11,1-o.d. 16,3mm
Steel braided, rubber hose - 10 (engine oil lines) i.d.14,3-o.d. 20,2mm
Steel braided, rubber hose - 12 (engine oil lines) i.d.17,5-o.d.23,8mm
Steel braided, rubber hose - 16 (engine oil & water lines) i.d.22,3-o.d.29,5
Steel braided, rubber hose - 20 (engine oil and water lines) i.d.28,6-o.d.36,5
€
€
€
€
€
€
22,28
21,88
29,30
33,00
45,00
85,81
Ref.
AIT1
AIT2
AIT3
AIT15
AIT16
AIT17
AIT500
SP 201-3
SP202-3
SP203-3
SP213-3
SP210-3-3
SP210-3
SP211-3
SP219-03
E007
E240106
E240005
E240006
AIT999
SPZ-T2-KF-ST
SPZ-T2-KF-90
SPZ-LUC90
SP401-6
SP401-8
SP401-10
SP401-12
[3:2] Fittings
Description
hose end - 3 straight female 1/8" x 28 BSP
hose end - 3 45° female 1/8" x 28 BSP
hose end - 3 90° female 1/8" x 28 BSP
hose end -3 straight male 10x1 metric swivel
hose end -3 45° male 10x1 metric swivel
hose end -3 90° male 10x1 metric swivel
Tee Junction 10x1 metric Fem-Fem-Fem with bolts kit.
hose end - 3 straight female
hose end - 3 45° female
hose end - 3 90° female
banjo - 3 straight short bolt diameter 3/8" or 10mm.
banjo - 3 straight double bolt diameter 3/8" or 10mm.
banjo - 3 straight long bolt diameter 3/8" or 10mm.
banjo - 3 30° bent long bolt diameter 3/8" o r 10mm.
banjo - 3 90° bent long bolt diameter 3/8" or 10mm.
hose spreader - 3 & - 4
aluminum quick disconnect -6
Hose end -6 push on diameter 7,5mm
Hose end -6 push on 10mm
1mt of hose with special hose end to open E240106 or 0206 or 0306
Straight hose end K & F Stainless steel
90° hose end K & F Stainless steel
90° hose end Lucas Stainless steel
-6 straight hose end
-8 straight hose end
-10 straight hose end
-12 straight hose end
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (c)
12,97
12,97
12,52
8,08
9,50
9,50
21,07
7,59
18,97
18,97
9,10
15,18
9,10
9,87
15,18
29,53
103,00
9,60
9,60
35,31
14,74
31,59
31,57
5,47
6,53
8,50
13,66
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
7
Ref.
SP402-6
SP402-8
SP402-10
SP402-12
SP403-6
SP403-8
SP403-10
SP403-12
Description
-6 45 degree hose and
-8 45 degree hose and
-10 45 degree hose and
-12 45 degree hose and
-6 90 degree hose and
-8 90 degree hose and
-10 90 degree hose and
-12 90 degree hose and
Ref.
SP101-4
SP101-6
SP101-8
Description
-4 straight hose end
-6 straight hose end
-8 straight hose end
EURO (c)
€
9,87
€
8,35
€
9,87
SP101-10
SP101-12
SP101-16
SP101-20
SP102-4
SP102-6
SP102-8
SP102-10
SP102-12
SP102-16
SP102-20
SP103-4
SP103-6
SP103-8
SP103-10
SP103-12
SP103-16
SP103-20
-10 straight hose end
-12 straight hose end
-16 straight hose end
-20 straight hose end
-4 45 degree hose and
-6 45 degree hose and
-8 45 degree hose and
-10 45 degree hose and
-12 45 degree hose and
-16 45 degree hose and
-20 45 degree hose and
-4 90 degree hose and
-6 90 degree hose and
-8 90 degree hose and
-10 90 degree hose and
-12 90 degree hose and
-16 90 degree hose and
-20 90 degree hose and
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
13,66
18,97
30,35
39,84
24,28
20,87
24,28
30,35
37,94
60,70
74,36
24,28
20,87
24,28
30,35
37,94
60,70
74,36
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (c)
12,97
12,97
12,52
5,79
5,79
5,79
5,79
5,79
4,52
5,79
4,52
4,52
5,24
5,79
1,93
9,64
12,20
3,55
4,50
8,08
9,50
9,50
1,93
1,93
20,56
1,95
4,50
1,93
€
€
€
€
€
€
€
€
EURO (c)
17,45
23,37
26,56
34,91
17,45
23,37
26,56
34,91
Swivel Hose End for HIGH-PRESS Hose
[3:3] Nipples: adapters
All pieces manufactured from high grade aluminium bar prior to heat treatment for durability then finally anodised in blue.
Small batch numbers available made to your specification on demand.
Ref.
Description
AIT1
hose end - 3 90° female 1/8"
AIT2
hose end - 3 45° female 1/8"
AIT3
hose end - 3 straight female 1/8"
AIT18
Nipple 1/8":7/16"
AIT74
Nipple 1/8":10x1
AIT38
Nipple 1/8":12x1
AIT19
Nipple 1/8":3/8"
AIT28
Nipple 1/8":10x1,25
AIT29
Nipple 1/8" male:10x1 female
AIT21
Nipple 1/8":1/8"
AIT36
Nipple bulkhead 1/8":3/8" male-male
AIT9
Nipple bulkhead 1/8":10x1
AIT22
Nipple bulkhead 1/8":1/8"
AIT14
Tee Junction 1/8" male-male-male
AIT7
Steel nut 1/8"
AIT31
Tee Junction 1/8" Fem-Fem-Fem
AIT73
banjo - 3 straight double male-male 1/8" bolt diameter 10mm.
AIT13
banjo bolt 1/8"
AIT162
banjo - 3 straight male 1/8" bolt diameter 10mm.
AIT15
hose end -3 straight male 10x1 swivel steel
AIT16
hose end -3 45° male 10x1 swivel steel
AIT17
hose end -3 90° male 10x1 swivel steel
AIT10
banjo bolt 10x1
AIT35
banjo bolt 10x1,25
AIT500
Tee Junction 10x1 Fem-Fem-Fem with bolts kit.
AIT32
Steel nut 10x1
AIT160
banjo - 3 straight male 10x1
AIT11
banjo bolt 3/8"
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
8
AIT11L
banjo bolt 3/8" long
€
2,81
Ref.
AIT20
AIT30
AIT37
AIT54
AIT71
AIT76
AIT12
AIT24
AIT24-3
AIT23
AIT25
AIT26
AIT27
AIT41
AIT42
AIT44
AIT50
AIT55
AIT56
AIT57
AIT58
AIT60
AIT61
AIT62
AIT63
AIT64
AIT72
AIT67
AIT68
AIT69
AIT70
AIT75
AIT79
AIT80
AIT81
AIT82
AIT77
AIT83
AIT84
AIT85
AIT86
AIT88
AIT89
AIT91
AIT92
AIT93
AIT94
AIT95
Description
Nipple 3/8":3/8"
Nipple bulkhead 3/8":3/8"
Nipple 3/8":3/8"
Nipple 3/8": -6
banjo - 3 straight double male-male 3/8" bolt diameter 10mm.
Nipple 3/8": 12x1
banjo bolt 7/16"
banjo - 4 straight bolt diameter 11,2mm.
banjo - 4 straight bolt diameter 10mm.
Nipple 1/2": -10 steel
Nipple 12X1,5:14X1,5 steel
Nipple 14X1,5:14X1,5 steel
Nipple 12X1,5:12X1,5 steel
Nipple - 6:14X1,5 steel
Nipple - 6:12X1,5 steel
Nipple - 6:1/4" steel
Nipple - 10:1/2" port thd. Aluminum
Nipple - 6:10X1,25 aluminum
Nipple - 6:16X1,25 aluminum
Nipple - 6:18X1,5 aluminum
Nipple - 6:12X1 aluminum
Nipple - 6:blanck ex.19mm to weld aluminum
banjo -6 male bolt diameter 12mm
banjo male -6 bolt diameter 14mm
banjo male -6 bolt diameter 16mm
banjo - 6 straight double male-male 3/8" bolt diameter 12mm.
banjo male -8 bolt diameter 14mm
banjo male -8 bolt diameter 16mm
banjo male -8 bolt diameter 18mm
banjo male -10 bolt diameter 18mm
banjo male -10 bolt diameter 22mm
Nipple - 8:14X1.5 steel
Nipple - 8:18X1.5 steel
Nipple - 8:blanck ex.24mm to weld aluminum
Nipple - 8:18X1.5 aluminum
Nipple - 8:16X1.5 aluminum
Nipple - 8:1/2" port thd. Aluminum
Nipple - 10:blanck ex.24mm to weld aluminum
Nipple - 8:18X1.5 aluminum
Nipple - 10:20X1.5 aluminum
Nipple - 10:22X1.5 aluminum
Nipple - 10:5/8" aluminum
Nipple - 10:1/2" port thd. Aluminum
Nipple - 12:blanck ex.29mm to weld aluminum
Nipple - 12:5/8" aluminum
Nipple - 10:26X1.5 aluminum
Nipple - 12:1/2" port thd. Aluminum
Nipple - 12:22X1.5 aluminum
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (c)
5,79
4,52
9,63
5,14
12,21
5,79
4,52
14,78
14,78
5,13
3,87
3,87
3,87
8,37
8,37
6,44
8,70
7,61
8,36
8,37
8,36
8,36
21,82
21,82
21,82
20,56
24,40
24,40
24,40
26,98
26,98
9,60
9,60
9,60
9,60
9,60
9,60
9,60
9,60
9,80
9,80
9,80
10,45
10,92
10,92
10,92
10,92
10,92
Ref.
SP-H03AL
SP-H04AL
SP-H06AL
SP-H10AL
SP-H12AL
SP-H03T
SP-H04T
SP-H06T
[3:4] Quick disconnecting fittings
Description
Quick disconnecting fittings -3 aluminum
Quick disconnecting fittings -4 aluminum
Quick disconnecting fittings -6 aluminum
Quick disconnecting fittings -10 aluminum
Quick disconnecting fittings -12 aluminum
Quick disconnecting fittings -3 titanium
Quick disconnecting fittings -4 titanium
Quick disconnecting fittings -6 titanium
€
€
€
€
€
€
€
€
EURO (b)
80,00
88,00
105,00
154,00
164,00
105,00
125,00
135,00
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
TECNO 2 S.r.l.
Price list effective from
01 January 2014
9
[3:5] Oil Radiator PWR
Aluminum Oil Radiator with the same measures L = Lenght, W = Width, H = Height
Ref.
Description
PW007
PWR Oil Radiator 7 file : 7/8 female (L=.328mm. X Width 43,2mm. X h. 69mm.)
PW014
PWR Oil Radiator 14 file : 7/8 female (L=.328mm. X Width 43,2mm. X h. 131mm.)
PW021
PWR Oil Radiator 21 file : 7/8 female (L=.328mm. X Width 43,2mm. X h. 194mm.)
PW028
PWR Oil Radiator 28 file : 7/8 female (L=.328mm. X Width 43,2mm. X h. 256mm.)
PW03950
Hose and PWR M/M 7/8 -12
PW03951
Hose and PWR M/M 7/8 -10
PW04960
Hose and PWR M/M 7/8 -6
PWO4972
Hose and PWR M/M 7/8 -8
€
€
€
€
€
€
€
€
EURO (c)
105,00
148,00
169,00
195,00
10,32
8,72
7,60
7,60
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (c)
5,43
5,43
6,93
5,43
5,43
6,93
11,00
11,37
11,99
5,88
5,93
7,38
21,00
13,00
19,00
13,00
7,50
13,00
15,20
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
13,00
17,72
17,72
13,00
13,00
13,00
[4:0] COMPONENTS
[4:1] LIGHT wheel spacers
The wheel spacer "LIGHT", machined from castings, are ideal for road application & are also very cost effective with
multiple application ability (4&5 holes). "Competition" spacers are produced on the same digital machinery but from higher
grade alluminium bar for individual models. These spacers are anodised to prevent oxydation. Priced in axle sets of 2 pieces.
For ease of fittment we may supply a full range of bolts or studs & nuts of [4:2].
Price and available on request, please write to [email protected]
[4:2] NUTS STUDS and BOLTS for wheels
Wheel studs & bolts are produded from high tensile steel having rolled threads, reducing the risk of fatigue failures.
Knowledge from our competition experience has led us to use a dissimilar material of the nut from that of the wheel stud.
This plus copper coating of the nut assures security
Ref.
Description
AIT-68A
12X1,25 - 12X1,25 L.68 wheel stud
AIT-82A
12x1,25 - 12x1,25 L.82 wheel stud
AIT-100A
12x1,25 - 12x1,25 L.100 wheel stud
AIT-68B
12x1,25 - 12x1,5 L.68 wheel stud
AIT-82B
12x1,25 - 12x1,5 L.82 wheel stud
AIT-100B
12x1,25 - 12x1,5 L.100 wheel stud
AIT-68C
12x1,5 L.68 FORD wheel stud
AIT-82C
12x1,5 L.82 FORD wheel stud
AIT-100C
12x1,5 L.100 FORD wheel stud
AIT-68F
14x1,5 - 14x1,5 L.68 wheel stud (VW-Audi)
AIT-82F
14x1,5 - 14x1,5 L.82mm wheel stud (VW-Audi)
AIT-100F
14x1,5 - 14x1,5 L.100mm wheel stud (VW-Audi)
AIT-90XD
standard 1/2" UNF both side
AIT-65CH
1/2" x 20UNF L=65mm wheel stud (Crhysler)
AIT-65PC
14 x 1,5: 14 x 1,5 L= 65mm wheel stud
AIT-68CH
12 x 1,5 L=68mm wheel stud (Crhysler)
AIT-65PO
14 x 1,5: 14 x 1,5 L= 65mm wheel stud (PORSCHE - AUDI)
AIT-75G
14x1,5 L.75 PORSCHE wheel stud
AIT-100G
14x1,5 L.100 PORSCHE wheel stud
AIT-64HY
12x1,5 L.64 HYUNDAI wheel stud
AIT-68H
12x1,5 L.68 HONDA wheel stud
AIT-61M
12x1,25 L.61 MAZDA wheel stud
AIT-65M
12x1,5 L.65 MAZDA wheel stud
AIT-67MIT
12x1,5 L.67 MITSUBISHI wheel stud
AIT-62N
12x1,5 L.62 NISSAN wheel stud
AIT-64N
12x1,25 L.64 NISSAN wheel stud
AIT-60R
12x1,5 L.60 ROVER wheel stud
AIT-66S
12x1,25 L.66 SUBARU wheel stud
AIT-73T
12x1,5 L.73 TOYOTA wheel stud
AIT-69V
12x1,5 L.69 VOLVO wheel stud
AIT-70V
12x1,5 L.70 VOLVO wheel stud
AIT-70XA
12X1,25 - 12X1,25 L.70 mm special wheel stud
AIT-70XB
12x1,25 - 12x1,5 L.70mm special wheel stud
AIT-72J
1/2" x 20UNF L=72mm wheel stud (Jaguar-Aston Martin)
AIT-59D
12 x 1,25 L=59mm wheel stud (Daewoo Matiz)
AIT-70AR
Front ALFA ROMEO wheel stud (old style)
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
10
AIT 74V
12X1,5 L.70 VOLVO wheel stud
€
12,26
Ref.
AIT-81AR
AIT-84J
AIT-55F
AIT-84XA
AIT-84XB
AIT-70OP
AIT-90OP
AIT-100OP
AIT-71M
AIT-80M
AIT-68STR
AIT-74NSR
AIT-108NSR
AIT-87LRY
AIT-DADO
AIT-DADO-1
AIT-DADO-2
AIT-DADO-3
Description
Rear ALFA ROMEO wheel stud (old style)
12x1,5 L.84 JAGUAR wheel stud
14X1,5 L. 55 wheel stud
12X1,25 - 12X1,25 L. 84 special stud
12X1,25 - 12X1,5 L. 84 special stud
12x1,5 -12x1,5 L.70 (Opel)
12x1,5 -12x1,5 L.90 (Opel)
12x1,5 -12x1,5 L.100 (Opel)
14x1,25 - 14x1,5 L. 71 (Bmw Mini after July '06)
14x1,25 - 14x1,5 L. 80 (Bmw Mini after July '06)
14x1,5 L.68 LANCIA STRATOS wheel stud
5/8" L. 74mm wheel NAFCAR wheel stud
5/8" L. 108mm wheel NAFCAR wheel stud
12x1,25 - 14x1,5 L. 87 ex 20mm (Lancia rally)
12x1,25 steel coppered nut ex 19mm, o.d. 23mm conical seat
12x1,5 steel coppered nut ex 19mm, o.d. 23mm conical seat
12x1,5 for FORD original wheels ex 19mm, o.d. 28mm conical seat
12x1,25 PEUGEOT/CITROEN flat side nut ex 19mm, o.d. 28mm
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (c)
20,76
12,50
12,50
21,00
21,00
6,00
6,71
7,20
7,53
7,53
13,00
13,00
15,21
21,00
4,61
4,61
5,55
9,30
AIT-DADO-4
AIT-DADO-5
AIT-DADO-6
AIT-DADO-7
AIT-DADO-8
AIT-DADO-9
AIT-DADO-10
AIT-DADO-12
AIT-DADO-15
AIT-DADO-16
AIT-DADO-18
AIT-DADO-19
AIT-DAAL
AIT-DAAL1
AIT-DAAL2
AIT-DAAL3
AIT-DAAL6
AIT-DAAL8
AIT-DAAL11
AIT-DAAL15
AITBA-75
AITBB-75
AITBH-75
AITBF-75
AITBF-85
AITBG-75
AITBL-75
AITBM-75
AITBM-85
AITBP-80
AITBP-82
AITBSS-75
14x1,5 AUDI VW steel coppered nut ex 22mm, o.d. 25mm conical seat
14x1,5 AUDI VW steel coppered nut ex 19mm, o.d. 25mm spherical seat
14x1,5 steel coppered nut ex 19mm, o.d.25mm conical seat
12x1,25 Exag. 17mm, o.d. 25mm steel copperd nut spherical seat
12x1,25 Exag. 17 , o.d. 25mm steel coppered nut spherical seat
12x1,25 Exag. 17 , o.d. 25mm steel coppered nut conical seat
12x1,5 Exag. 19mm, o.d. 23mm steel coppered nut (Mitsubishi gr. N) conical seat
12x1,25 coppered steel nut ex 19mm, o.d. 28mm conical seat
1/2" UNF exag. 3/4" steel coppered nut
12x1,25 Exag. 19mm steel coppered nut conical seat
12x1,5 Exag. 17 , o.d. 25mm steel coppered nut conical seat
12x1,5 Exag. 17 , o.d. 25mm steel coppered nut spherical seat
12x1,25 Ergal alloy competition nut (black) ex 19mm, o.d. 22mm conical seat
12x1,5 Ergal alloy competition nut (black) ex 19mm, o.d. 22mm conical seat
12x1,25 Ergal alloy blank nut (black) ex 19mm, o.d. 22mm conical seat
12x1,5 Ergal alloy blank nut (red or blue) ex 19mm, o.d. 22mm conical seat
14X1,5 Ergal alloy competition nut (black) ex 19mm, o.d. 25mm conical seat
14X1,5 Ergal alloy competition nut (black) ex 19mm, o.d. 25mm spherical seat
12X1,5 Ergal alloy competition nut (black) ex 19mm o.d. 28 conical seat
1/2" UNF Ergal alloy competition nut (black) exag. 3/4", o.d. 25mm conical seat
h.d. zinc.plated bolts 12x1,25x75 with 19mm head (Universal Application)
h.d. zinc.plated bolts 12x1,5x75 with 19mm head (Universal Application)
h.d. zinc.plated bolts 12x1,75x75 with 19mm head (Volvo)
h.d. zinc.plated bolts 14x1,5x75 with 19mm head (VW)
h.d. zinc.plated bolts 14x1,5x85 with 19mm head (VW)
h.d. zinc.plated bolts 12x1,5x75 with 17mm head
h.d. zinc.plated bolts 14x1,5x75 with 19mm head
h.d. zinc.plated bolts 12x1,5x75 with 17mm head (Mercedes)
h.d. zinc.plated bolts 12x1,5x85 with 17mm head (Mercedes)
h.d. zinc.plated bolts 12x1,25x80 with 19mm head (Peugeot)
h.d. zinc.plated bolts 12x1,25x82with 19mm head (Peugeot)
h.d. zinc.plated bolts 12x1,5x75 with 15mm head (Smart)
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
5,10
5,40
5,40
5,90
5,40
5,40
5,34
5,55
5,34
6,30
5,40
5,40
6,30
6,30
6,30
6,30
6,82
6,82
6,30
6,82
4,76
4,76
4,76
5,29
5,29
4,76
5,29
5,29
5,29
5,76
5,94
5,29
Ref.
AIT***/5
Description
Titanium wheel stud, drade five. This type of special wheel fixation are manufactured just on demand
(minimum 20pcs). Save 50% of the classic steel wheels type.
€
EURO (cc)
37,67
New : Titanium wheel stud
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
TECNO 2 S.r.l.
Price list effective from
01 January 2014
11
[4:3] Special DASHBOARD and GAUGES
A.I.Tech. gauges are of robust contruction with the case made from very high quality nylon. The dial illumination in white
light. Dial faces are white with red needles, black lettering and a matt black bezel."B" version are with black dial.
Calibration of the guages is of the highest standard. A full range of associated sensors are available on demand.
Ref.
Description
AIT-H016
52mm. Oil temperature gauges 12V 50C° to 1 50C°
AIT-H016B
52mm. Oil temperature gauges 12V 50C° to 150C°
AIT-H022B
52mm. Fuel pressure gauges 12v 0bar to 5bar black
AIT-H23
52mm. Fuel pressure gauges 12v 0 bar to 10 bar
AIT-H024
52mm. Oil pressure gauges 12v 0 bar to 10 bar
AIT-H026B
52mm. Turbo Boost gauges12V -1bar to +2 bar black
AIT-H0266
Kit for AIT-H026 (3 mt. Hose and fittings)
AIT-H030B
52mm. Voltmeter gauges 12V 6Volts to 14Volts
AIT-H046
52mm. Oil pressure / oil temperature dual gauge, 2 mt lenght sender
AIT-H046B
52mm. Oil pressure / oil temperature dual gauge, 2 mt lenght sender blank
AIT-H800
100mm. Tachometer 0-10000 + swift light
AIT-H800B
100mm. Tachometer 0-10000 + swift light black.
AIT-H120
temperature sensor gauge 40C° to 120C° (M10 x1 or 1/8)
( aa)
AIT-H120A
temperature sensor gauge 40C° to 120C° (M1 0x1 or 1/8) W-ALLARM
( aa)
AIT-H150
temperature sensor gauge 50C° to 150C° (M10 x1 or 1/8)
( aa)
AIT-H150A
temperature sensor gauge 50C° to 150C° (M1 0x1 or 1/8) W-ALLARM
( aa)
AIT-H205
pressure sensor gauge 0 bar to 5bar (M10x1 or 1/8)
( aa)
AIT-H205A
pressure sensor gauge 0 bar to 5bar (M10x1 or 1/8) W-ALLARM
( aa)
AIT-H210
pressure sensor gauge 0 bar to 10bar (M10x1 or 1/8)
( aa)
AIT-H210A
pressure sensor gauge 0 bar to 10 bar (M10x1 or 1/8) W-ALLARM
( aa)
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (cc)
34,00
34,00
34,00
34,00
34,00
77,33
9,33
34,00
115,60
115,60
217,60
217,60
14,50
53,00
21,00
69,00
61,80
84,00
67,00
65,00
AIT-GM1F
Flat palte gauge mounts 1 hole carbon-look Ø 52mm.
€
29,50
AIT-GM2F
AIT-GM3F
AIT-GM1L
AIT-GM1U
AIT-GM2L
AIT-GM2U
AIT-GM3L
AIT-GM3U
AIT-GM80U
AIT-GM240
Flat palte gauge mounts 2 hole carbon-look Ø 52mm.
Flat palte gauge mounts 3 hole carbon-look Ø 52mm.
Windscreen pillar mounts from single mount carbon-look Ø 52mm.
Universal fitting gauge monts from single mount carbon-look Ø 52mm.
Windscreen pillar mounts from double mount carbon-look Ø 52mm.
Universal fitting gauge monts from double mount carbon-look Ø 52mm.
Windscreen pillar mounts from triple mount carbon-look Ø 52mm.
Universal fitting gauge monts from triple mount carbon-look Ø 52mm.
Universal fitting gauge monts from single mount carbon-look Ø 80mm.
Dash top mounting pods
€
€
€
€
€
€
€
€
€
(c ) €
33,85
39,32
41,50
38,23
58,99
49,16
61,17
57,98
46,96
70,93
PRO-TACK ELECTRONIC DASH SYSTEM AND CRONO TIMING DISPLAYS
Ref.
Description
AIT-PROTACKEVO Pro-tack is a complete dash display unit with rev counter and digital display
for variuos engine readings.
The unit features a complete electronic dash and data logger system with analogue
R.P.M. and Digital information but with Graphic LCD on oil pressure, oil temp, water temp.,
fuel pressure, speed etc. etc… and many alarms. 4 hours recording time,999 Laps
(adding a beacon on the trackside and an optical sensor on board), CAN BUS (for
optional expansion). USB, frimware upgradable (freely downloaded from the web site
www.aitechinstruments.com).Dimension :160x85x40mm.
It is supplied complete with wiring harness, sensors, PC software and manual.
AIT-CABPROEV
Cable set for AIT-PROTACKEVO (included sensors, red led, USB for pc and printing. Cd rom
software with italian and english manual. NOT included VDO temp and press.Sensors.)
PRO REV
The Pro REV is a tachometer that can be applied to any type of engine (2 or 4 stroke
with 1 or more coils), using the tacho output of the ignition system, or connecting
in to one of the available coils. features: 10 programmable shift lights, RPM peak value
record, 6 hours data Logger (optional).
AIT-RT2/11
Digital chronometer with 6 digit time display, clock, intermediate, 250 times memory
AIT-RT3 (07)
Circuit chronometer with waterproof membrane function keyboard and 5 digit time
display with 0,01 sec. accuracy.
Features: 250 laps memory, Intermediate time, Best time, connection to PC or Printer.
It is supplied complete with PC sofware, cable and transmitter AIT-fTX03
Dimension: 100x65x24mm only.
AIT-RT4
EURO (c)
(a)
€
1.390,00
(a)
€
305,33
€
€
362,25
138,60
€
268,07
€
284,63
New powerfulinstrument that combine a chronometer with a time (sexagesimal) calculator.
Features: Graphic backlighted LCD display, accuracy 0,01 sec., 250 laps memory,
Stopwatch, countdown, connection to PC or Printer.It is supplied complete with PC
software and cable.Dimension: 72x105x26mm only.
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
12
Ref.
AIT-RT5
Description
The AIT-RT5 is a lap timer based on the GPS System and it is not necessary
to use an external sensor such as an optical beacon or a magnetic sensor
to freeze the time. AIT-RT5 is ideal for usage in all races.
CRONO PLUS
This digital chronometer is a product specially designed to be used in long distance
races, such as rallies and classic car races.
It has a waterproof membrane function keyboard and 7 digit time display with 0,01
sec. Accuracy, and 99 laps memory.
AIT-FTX03
Transmitter for AIT-RT3 (07)
AIT-FTX02
Infra Red Transmitter( trackside beacon for lap timing system) for: ProTack,
ProTackEVO, CronoPlus.
AIT-FRX01
Infra Red Received for: ProTack, CronoPlus.
AIT-FRX02
Infra Red Received for: ProTackEVO.
AIT-FTX01
Transmitter for: CronoPlus.
AIT-CRONO-KIT
Set of :T2CRONO-PLUS+fTX02+fRX01
AIT-650090
Lambda sender complete kit with ecu and digital control
LED PANEL to display general information, can also visualize a sponsorship. NET PRICE
AIT-LEDPANEL
Ref.
AIT-H012AB
AIT-H016AB
AIT-H022AB
AIT-H024AB
AIT-H030AB
AIT-H040AB
AIT-H070AB
AIT-H0520AB
AIT-H0530AB
Special gauges Carlo Abarth Foundation. Dial faces are white with fluorescent orange needles:
Description
52mm. Water temperature gauges 12V 40C° to 120C°
NEWS
52mm. Oil temperature gauges 12V 50C° to 150C°
NEWS
52mm. Fuel pressure gauges 12v 0 bar to 5 bar
NEWS
52mm. Oil pressure gauges 12v 0 bar to 10 bar
NEWS
52mm. Voltmeter gauges 12V 9Volts to 17Volts
NEWS
52mm. Fuel Level 12V from 0 to 4/4
NEWS
80mm. Turbo Boost gauges 12V -1bar to +2 bar
NEWS
80mm. Tachometer 0-8000
NEWS
80mm. Tachometer 0-10000
NEWS
EURO (c)
€
330,00
€
€
268,91
145,58
€
€
€
€
€
(a) €
€
145,58
178,35
102,63
213,49
576,20
828,00
6.000,00
€
€
€
€
€
€
€
€
€
EURO (cc)
49,90
49,90
49,90
49,90
49,90
49,90
194,30
194,30
194,30
€
€
€
€
€
€
€
€
€
EURO (c)
189,00
220,00
162,00
160,00
160,00
156,00
231,00
236,00
271,00
€
€
€
€
€
€
€
EURO (a)
132,00
210,00
285,00
405,00
495,00
655,00
890,00
€
€
€
€
€
EURO (a)
73,00
136,00
195,00
48,00
41,00
Extreme Racing Battery ODYSSEY
Please for further information visit the following link: http://www.tecno2.com/produttori/scheda/id/24
Ref.
Description
Extreme Racing battery 310A PHRA (2 sec) dim. 138x86x101 kg. 2,70
ODY.08
Extreme Racing battery 370A PHRA (2 sec) dim. 200x77x140 kg. 5,70
ODY.15
Extreme Racing battery 535A PHRA (2 sec) dim. 170x99x157 kg. 5,70
ODY.18
Extreme Racing battery 545A PHRA (2 sec) dim. 178x86x131 kg. 5,70
ODY.20
Extreme Racing battery 625A PHRA (2 sec) dim. 170x99x175 kg. 6,00
ODY.22
Extreme Racing battery 680A PHRA (2 sec) dim. 185x79x169,4 kg. 7,00
ODY.25
Extreme Racing battery 950A PHRA (2 sec) dim. 250x97x156 kg. 9,00
ODY.30
Extreme Racing battery 925A PHRA (2 sec) dim. 169x179x128 kg. 11,8
ODY.35
Extreme Racing battery 1110A PHRA (2 sec) dim. 250x97x206 kg. 12,5
ODY.40
LITH13-04 A
LITH13-06 A
LITH13-08 A
LITH13-10 R
LITH13-13 R
LITH13-18 R
LITH13-26 R
LITH/CHA14-1.5
LITH/CHA14-6
LITH/CHA14-10
LITH/BRK
LITH/POLE
Volt
13,2Volt
13,2Volt
13,2Volt
13,2Volt
13,2Volt
13,2Volt
13,2Volt
ENERGA Lithium Batteries systems Extra-Light
Dimensions
A/h
A
112 x 34 x h 111 mm
2,5 A/h
120A
118 x 80 x h 94 mm
5 A/h
240A
118 x 88 x h 111 mm
7,5 A/h
360A
139 x 93 x h 155 mm
10 A/h
480A
139 x 93 x h 155 mm
12,5 A/h
600A
166 x 93 x h 165 mm
17,5 A/h
800A
247 x 93 x h 165 mm
25 A/h
1200A
Special Options for Energa Batteries:
Lithium battery charger mod.C14-1.5 (1,5 Ampere)
Lithium battery charger mod.C14-6 (6 Ampere)
Lithium battery charger mod.C14-10 (10 Ampere)
Hold-Down Bracket (models 13-3, 13-5 excluded)
Car adapter poles (couple)
Weight
only 500 gr.
only 900 gr.
only 1280 gr.
only 1845 gr.
only 2050 gr.
only 2830 gr.
only 4350 gr.
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
[4:4] A.I.TECH. Steering wheel quick release boss, Steering wheels, Rainlight and Tow Hooks
Ref.
Description
AIT-QR210
Quick release Formula 3 holes M5 with PCD 50mm
AIT-QR215
Quick release Touring 6 holes M5 with PCD 50mm
AIT-QR220
Quick release Touring car 6 holes M5 with PCD 70mm Momo-Omp-Sabelt-Sparco
AIT-QR240
Quick release Gr. N 6 + 6 double holes Momo/Omp - Nardi/Motolita
AIT-QR245
Quick release Gr. N 6 + 6 double holes Momo/Omp - Nardi/Motolita with steel hub
AIT-QR.HUB60
Special 60 mm hub adaptor for AIT-QR215
AIT-QR.SP15
15 mm Spacer for AIT-QR.HUB60
AIT-QR.SP30
30 mm Spacer for AIT-QR.HUB60
280mm Steering Wheel for Sport and formula application, black suede leather, 3 spokes flate
(3 holes x 52mm pcd. or blank)
320mm Steering wheel for rally and touring with flange for electrical switches
330mm Steering wheel for rally and touring cars. Black suede leather, 2 spokes dished 90mm
(6 holes x 70mm pcd.)
330mm Steering wheel for rally and touring cars. Black suede leather, 3 spokes flat(no dished).
AIT-STW280
AIT-ST320/E
AIT-STW330/2
AIT-STW330/F
13
(b)
(b)
(b)
€
€
€
€
€
EURO (c)
172,04
177,44
192,40
261,30
284,02
€
84,00
€
26,40
€
€
35,20
145,40
€
€
284,02
135,39
€
135,39
€
135,39
€
135,39
€
135,39
€
135,39
(6 holes x 70mm pcd.)
AIT-STW330/3F
AIT-STW350/2
AIT-STW350/3
AIT-STW350/F
AIT-STW380/3
AIT-BH
Ref.
AIT-TOW-50
AIT-TOW-60
AIT-TOW-80
AIT-TOWFIX
AIT-TOW-FIX2
330mm Steering wheel for rally and touring cars. Black suede leather, 3 spokes flat(no dished).
(6 holes x 70mm pcd. + 3 holes x 44,5mm pcd.)
350mm Steering wheel for rally and touring cars. Black suede leather, 2 spokes dished 90mm
(6 holes x 70mm pcd.)
350mm Steering wheel for rally and touring cars. Black suede leather, 3 spokes dished 75mm
(6 holes x 70mm pcd.)
350mm Steering wheel for rally and touring cars. Black suede leather, 3 spokes flat(no dished).
(6 holes x 70mm pcd.)
350mm Steering wheel for rally and touring cars. Black suede leather, 3 spokes dished 75mm
(6 holes x 70mm pcd.)
Button horn for any wheels
149,9
€
5,27
Description
Special aluminium tow hooks as per FIA request. Complete with high tensile bolts and nuts
Sizes is 50mm, are available in yellow and red colour.
Same as above but the inside diameter size is 60mm
Same as above but the inside diameter size is 80mm
Adjustable connection between car chassis to the ait-tow hooks.
€
EURO (e)
35,63
€
€
€
35,63
35,63
86,53
adjustable fixation for AIT-TOW (any dimension) with 130 mm special
€
100,27
€
331,66
€
EURO (b)
381,75
€
519,18
€
1.934,20
€
495,00
€
570,08
€
€
€
€
€
€
€
€
€
€
€
€
€
346,00
362,00
179,50
179,50
215,00
215,00
28,50
28,50
174,59
262,64
1.007,82
86,53
1.119,80
€
671,88
high tensile steel rod-joint, threaded shaft and double nuts
AIT-ROOF1
Carbon/carbon roof vent clear Top
(b)
[4:5] A.I.TECH. Air-Jack , Quick Lift and Steering Box
AIT-AJ230
AIT-AJ300
AIT-AJ600
AIT-PRO230
AIT-PRO300
AIT-TJ200
AIT-TJP220
AIT-SJ230
AIT-SJ300
AIT-SJP230
AIT-SJP300
AIT-AJSP38
AIT-AJSP50
AIT-CM10
AIT-CF10
AIT-LIFT09
AIT-LIFT09/PI
AIT-LIFT09/4x4
AIT-ST-BOX
High strenght aluminium air-jacks offering high stability and featuring innovative design, very
fast release, 230mm stroke for car use with 38mm feet section.
High strenght aluminium air-jacks offering high stability and featuring innovative design, very
fast release, 300mm stroke for car use with 38mm feet section.
High strenght aluminium air-jacks offering high stability and featuring innovative design, very
fast release, 600mm stroke for truck usewith 38mm feet section.
High strenght aluminium air-jacks offering high stability and featuring innovative design, very
fast release, 230mm stroke for car use with 50mm feet section.
High strenght aluminium air-jacks offering high stability and featuring innovative design, very
fast release, 300mm stroke for car use with 50mm feet section.
Steel tower which allows an extra lift at the standard air-jack stroke for car use for AIT-AJ.
Steel tower which allows an extra lift at the standard air-jack stroke for car use for AIT-PRO.
Cast aluminium safety prop system 230mm stroke for AIT-AJ.
Cast aluminium safety prop system 300mm stroke for AIT-AJ.
Cast aluminium safety prop system 230mm stroke for AIT-PRO.
Cast aluminium safety prop system 300mm stroke for AIT-PRO.
38mm Spring set for AIT-SJ.
50mm Spring set for AIT-SJP.
Air male connection to the car body
Air female connection to the hose
Model 2009 quick lift for Rally Car with adjustable rolling pivot
Pivot for AIT-LIFT09 & AIT-LIFT09/4x4. Diameter to be confirmed before order
Model 2009 quick lift for Off-Road light Truck with adjustable rolling pivot
Competition Steering Box. Extremely rigid solid bar stock & billet aluminium body results in a lightweight
and easy to install product.
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
14
[4:6] A.I.TECH. Thermal insulating materials and Acoustical Mat
From ADVANCED INNOVATION TECHNOLOGY is now available the 2007 newest complete range of HI-TECH Thermal and acoustic
insulation materials. Are 1 square meter sheets manufactured in sandwich structure layer with aluminium and E fiberglass various
thicknesses, these can be self adhesives or not.
The products has large choice of reflecting thermal protections, starting from 120 since over 750 celsius degrees.
Ref.
Description
EURO (c)
AIT-S-ECO.K
Alu blanket, simple layer heat shield.Weight ca. 0,5 kg/m², 1 mtr. X 1 mtr. nominal tick.0.6mm th.
€
23,40
Not Self adhesive.
AIT-S-GLASS.K
E-glass fiber fabric , 1 side coated with alu-polymer film, 1 side with pressure adhesive film. Weight
€
49,50
1,2 kg/m², size 1 mtr. x 1 mtr. X 1,2mm thickness. Self adhesive. Folded in 4.
AIT-S-LITE.K
E-glass fiber fabric ,1 side coated with a aluminum film, 1 side with pressure adhesive film.Weight ca. €
39,50
AIT-S-FEL.K
0,9 kg/m²,size 1 mtr.X1 mtr. nominal tick. 0.8mm th. Self adhesive.Folded in 4.
E-glass needled felt, 1 side with aluminium film, 1 side with pressure sensitive adhesive. Nominal
€
43,50
€
85,00
€
109,00
thickness from, weight (according the thickness) 1,9 kg/m² size 1 mtr. X 1 mtr. X 7 mm thickness.
AIT-TK-FIBRA-2
Folded in 2.
Insulating material resistance to direct heat up to 350°. Very low weight only 410gr/mt². Size 1mtr x
AIT-TK-MET/4
AIT-TK/15G
AIT-TK/25G
AIT-TK/40G
AIT-FILM10
AIT-FILM76/30
AIT-FILM152/30
AIT-HEADLIGHT
AIT-SKIN
0,73 mtr x 2,0mm thickness.
(aa)
Insulating material resistance to direct heat up to 350°. Very low weight only 570gr/mt². Size 1mtr x
0,73 mtr x 4,0mm thickness.
(aa)
Coil Insulating material resistance to direct heat up to 350°. Very low weight only 410gr/mt². Size
10mtr x 1,46 mtr x 2,0mm thickness.
Coil Insulating material resistance to direct heat up to 350°. Very low weight only 570gr/mt². Size
10mtr x 1,46 mtr x 4,0mm thickness.
Coil Insulating material resistance to direct heat up to 350°. Very low weight only 410gr/mt². Size
20mtr x 1,46 mtr x 2,0mm thickness.
Coil Insulating material resistance to direct heat up to 350°. Very low weight only 570gr/mt². Size
20mtr x 1,46 mtr x 4,0mm thickness.
Rigid 0,62 mtr x 0,265 mtr adhesive.
(aa)
Teknofibra sleeve bar - inside diameter 11 mm. - Lenght 140cms
(aa)
Teknofibra sleeve bar - inside diameter 21 mm. - Lenght 140cms
(aa)
Teknofibra sleeve bar - inside diameter 31 mm. - Lenght 140cms
(aa)
Safety adhesive film. Size 76cm x 1mt. (compulsory on racing and rally cars)
Safety adhesive film roll. Size 76cm x 30mt. (as above)
NET PRICE
Safety adhesive film roll. Size 152cm x 30mt. (as above)
NET PRICE
Safety adhesive film for protection of the headlights. Size 68cm x 70cm x 1mm Th. (Specify yellow or
Safety adhesive film for the painted body. Size 30cm x 2,5mt x 0,8mm.
Ref.
Description
AIT-TK-FIBRA-4
AIT-TK-ROL10/2
AIT-TK-ROL10/4
AIT-TK-ROL20/2
AIT-TK-ROL20/4
poa
poa
poa
€
€
€
€
€
€
€
€
poa
61,00
25,00
37,00
46,00
29,30
575,58
1.151,15
130,81
d.d.
Ducting Hose Tuflex
EURO (c)
TUFLEX25
Ducting hose diameter 25mm single
€
28,71
TUFLEX25-A
TUFLEX45
Ducting hose diameter 25mm double
Ducting hose diameter 45mm single
€
€
27,45
23,71
TUFLEX45A
Ducting hose diameter 45mm double
€
37,61
TUFLEX50
TUFLEX50A
Ducting hose diameter 50mm single
Ducting hose diameter 50mm double
€
€
24,55
35,21
TUFLEX57
TUFLEX57A
Ducting hose diameter 57mm single
Ducting hose diameter 57mm double
€
€
26,83
43,42
TUFLEX64
Ducting hose diameter 64mm single
€
29,20
TUFLEX64A
Ducting hose diameter 64mm double
€
37,55
TUFLEX70
Ducting hose diameter 70mm single
€
44,29
TUFLEX70A
Ducting hose diameter 70mm double
€
46,03
TUFLEX76
Ducting hose diameter 76mm single
€
35,71
TUFLEX76A
Ducting hose diameter 76mm double
€
49,41
TUFLEX82
Ducting hose diameter 82mm single
€
32,19
TUFLEX82A
Ducting hose diameter 82mm double
€
49,83
TUFLEX89
Ducting hose diameter 89mm single
€
32,79
TUFLEX89A
Ducting hose diameter 89mm double
€
46,70
TUFLEX95
Ducting hose diameter 95mm single
€
47,50
TUFLEX95A
Ducting hose diameter 95mm double
€
55,04
TUFLEX102
Ducting hose diameter 102mm single
€
39,89
TUFLEX102A
Ducting hose diameter 102mm double
€
49,69
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
15
[5:0] SPECIAL ENGINE PARTS
[5:1] A.I.Tech. Special head bolts
A.I.Tech. special cylinder head bolts are a direct replacement for the standard bolts.These bolts are made from very high
tensile steel blanks.Basic machining is carried out prior to heat treating and then finally the finishing process cleans up the
thread profile. These bolts help to protect the head gasket integrity in uprated engines. Special group A & WRC cyl head bolts
are avallable on demand.
Ref.
Description
AIT100-KIT
UNO TURBO (10 pcs)
AIT101-KIT
DELTA 8V (10 pcs)
AIT102-KIT
DELTA 16V (10 pcs)
AIT105-KIT
FORD SIERRA - ESCORT COSWORTH (10 pcs)
AIT107-KIT
TOYOTA TURBO 2Lt.
AIT108-KIT
RENAULT 5 GT TURBO (10 pcs)
AIT109-KIT
RENAULT CLIO Williams 16V(10 pcs)
AIT110-KIT
DELTA 8 -16V Gr.A (10 pcs)
AIT112-KIT
PEUGEOT 106 1,6-SAXO VTS (10 pcs)
€
€
€
€
€
€
€
€
€
EURO (c)
129,48
138,10
142,71
168,58
101,76
138,10
155,38
174,43
147,14
AIT114-KIT
RENAULT CLIO RS 2.0 Lt. 16V (10pcs)
€
155,38
AIT116-KIT
PEUGEOT 306 2.0 Lt.
€
155,38
AIT118-KIT
FIAT COUPE' 5 cylinder
€
314,11
[5:2] A.I.Tech. Special head gaskets
TECNO 2 being sole distributors for SPESSO RACING gaskets in Italy can offer a full range of cylinder head gaskets.
cylinder head gaskets.SPESSO are the brand leader for competition gaskets with either a standard pattern gasket using
DURIX-DA (with kevlar fibre) and AISI304 stainless steel crimped fire rings or a skeleton type DURIX-DA (with kevlar fibre)
and individual solid stainless steel fire rings for high comp ratio engines or recessed GP A block applications.
compratio engines or recessed GP A block applications.
Ref.
Description
ALFA ROMEO
GUA040
ALFA ROMEO 2,0lt.16V F3 sp.1,5mm (65515)
GUA041
ALFA ROMEO 1,5 Boxer sp.1,5mm (20951/2216) 2xcar
GUA042
ALFA ROMEO 1,7 Boxer sp.1,6mm (21071/2216) 2xcar
GUA043
GIULIA 1,3 SUPER-NUOVA SUPER sp.1,6 (20427/2216)
GUA044
GIULIA 1,6 GT-GTA-GTC-GTV sp.1,6mm(20659/2216)
GUA045
ALFA GTV 2.0 sp.1,6mm(20835/2216)
AUTOBIANCHI
GUA005
AUTOBIANCHI A112 ABARTH sp.1,6mm (20167/2216)
GUA006
A 112 Junior R/79-R/82 sp. 1,6mm (20588/2216)
CITROEN
GUA060
CITROEN SAXO 1600 16V sp.1,3 (21132/7713)
GUA063
CITROEN SAXO 1600 16V sp.1,2 (21132/7712)
FIAT
GUA001
FIAT UNO TURBO 1301 cc. sp.1,9mm (21038/2219)
GUA002
FIAT UNO TURBO e PUNTO GT 1372 cc. sp.1,9mm (21118/22189)
GUA 002-C
AS ABOVE BUT WITH SEPARATELY RING. TOGETHER (21118/2319)
GUA126
FIAT 126 Bis 700 sp. 1,4mm (21075/2214)
GUA128
FIAT128 1.1 C-CL-SL-Special-Coupè sp.1,6mm (20667/2216)
GUA035
FIAT UNO 1300 cc. sp.1,9mm (21007/2219)
GUA036
FIAT UNO 903 cc. sp.1,6mm (20588/2216)
GUA003
FIAT 131 ABARTH 16V sp.1,6mm (75596)
EURO (c)
€
€
€
€
€
€
153,24
136,90
136,90
100,00
100,00
100,00
€
€
68,45
68,45
€
€
100,00
100,00
€
€
€
€
€
€
€
€
100,00
100,00
300,61
100,00
100,00
86,31
68,45
100,00
GUA004
FIAT 127 1050 cc. sp.1,6mm (20927/2216)
€
100,00
GUA030
GUA031
FIAT 127 1301 cc. sp.1,6mm (20999/2216)
FIAT 128 1100 cc. sp.1,6mm (20667/2216)
€
€
94,50
94,50
GUA032
FIAT 128 1300 cc. sp.1,6mm (20947/2216)
€
94,50
GUA007
FIAT CINQUECENTO 900i sp.1,6mm (21110/2216)
€
77,38
GUA033
FIAT RITMO 1995 cc. sp.1,85mm (20998/22185)
€
100,00
GUA034
FIAT RITMO 1300/1500 cc. sp.1,6mm (20983/2216)
€
94,51
GUA049
FIAT Cinquecento 1,1 i.e Sporting sp.1,4mm (21076/2214)
€
86,31
GUA050
FIAT CINQUECENTO SPORTING sp.1,6mm (21076/2216)
€
86,31
GUA200
FIAT 2000 Spyder Europa VX sp.1,9mm (21011/2219)
€
100,00
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
TECNO 2 S.r.l.
Ref.
Price list effective from
01 January 2014
16
Description
FORD
FORD ESCORT COSWORTH sp.1,4mm (66993)
FORD ESCORT COSWORTH sp.1,6mm (65815)
FORD ESCORT CSW for separetely fire rings sp.1,2mm (67538)
FORD ESCORT CSW for separetely fire rings sp.1,4mm (67173)
FORD ESCORT CSW for separetely fire rings sp.1,6mm (67765)
EURO (c)
€
€
€
€
€
100,00
100,00
100,00
100,00
100,00
STAINLESS STEEL FIRE RINGS FOR GUA008-C/008-C1/009
LANCIA
LANCIA DELTA 4WD & INT. 8V sp.1,9mm (65507)
LANCIA DELTA INT.16V & EV.sp.1,4mm (67837)
LANCIA DELTA INT.16V & EV.sp.1,6mm (67178)
LANCIA DELTA INT.16V & EV.sp.1,9mm (66212)
€
117,82
€
€
€
€
100,00
100,00
100,00
100,00
€
€
€
€
€
€
€
€
40,00
40,00
100,00
100,00
100,00
117,82
100,00
100,00
€
€
€
€
€
€
€
€
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
GUA022
GUA024
GUA022C
GUA024C
ANEL3
GUA023
GUA028
EXHAUST SIDE GASKET LANCIA DELTA 8V sp.2,1 (66245)
EXHAUST SIDE GASKET LANCIA DELTA 16V sp.2,1 (66225)
LANCIA DELTA INT.& EV.16V for separetely fire rings sp.1,4mm
LANCIA DELTA INT.& EV.16V for separetely fire rings sp.1,6mm (67422)
LANCIA DELTA INT.& EV.16V for separetely fire rings sp.1,9mm (67662)
STAINLESS STEEL FIRE RINGS FOR GUA010-C/011-C/012-C sp. 1,4-1,6-1,9mm
FULVIA 1,3 GT-GTE-HP-SPORT-HF-Co sp.1,6mm (20607/2216)
FULVIA 1,6 COUPE'-HF-SPORT sp.1,6mm (66260)
PEUGEOT
PEUGEOT 106-205 RALLY 1,3,309 1,1 sp.1,6mm (66227)
PEUGEOT 205-309 1,6 GTI/1,9 sp.1,6mm (66485)
PEUGEOT 309 1,9 GTI/405 16V MI sp 1,6mm (66986)
PEUGEOT 306 2,0 16S sp. 1,4mm (67759)
PEUGEOT 106 1600 16V sp. 1,4(21155/2214)
PEUGEOT 306 16V 2,0 lt.rally sp.1mm (21147/7710)
PEUGEOT 106 1.1/1.4 - 205 1.1/1.4- 306 1.1/1.4- 309 16V SP.1.1mm(2108/7710)
PEUGEOT 106 1600 16V SP 1.2mm (21132/7712)
RENAULT
RENAULT 5 GT TURBO sp. 1,6mm (21002/2216)
RENAULT 5 GT TURBO sp. 1,9mm (21002/2219)
RENAULT 5 GT TURBO for separetely fire rings sp.1,6mm (67803)
RENAULT 5 GT TURBO for separetely fire rings sp.1,9mm (67808)
STAINLESS STEEL FIRE RINGS FOR GUA022-C/024-C
RENAULT CLIO 16V sp.1,4 (21107/2214)
RENAULT CLIO 16V sp.1,6 (21107/2216)
€
€
€
€
€
€
€
100,00
100,00
100,00
100,00
123,70
100,00
100,00
GUA055
RENAULT GT5 Turbo 2 sp.1,6mm (20975/2216)
€
100,00
GUA056
GUA057
GUA058
€
€
€
100,00
100,00
100,00
€
€
€
€
100,00
100,00
100,00
100,00
GUA070
ANEL-4
RENAULT GT5 Turbo 2 sp.1,9mm (20975/2219)
RENAULT CLIO Williams 2,0i sp.1,3mm (21107/7513)
RENAULT CLIO Williams 2,0i sp.1mm (21107/7710)
OPEL
OPEL CORSA 1600 16V sp. 1,4 (21129/2214)
OPEL MANTA,ASCONA,KADETT GTE sp.1,6mm (65813)
OPEL ASTRA,VECTRA,CALIBRA 16V sp.1,6mm (65813)
OPEL ASTRA,VECTRA,CALIBRA 16V sp.1,9mm (67104)
SUBARU
SUBARU IMPREZA sp.1.2 (2xcar)
SUBARU IMPREZA sp.1.2
€
€
240,86
117,82
GUA025
GUA026
GUA029
VOLKSWAGEN
VOLKSWAGEN GOLF GTI 1,8 8V-16V sp.1,6mm (67352)
VOLKSWAGEN GOLF GTI 1,8 F3 sp.1,9mm (65636)
VOLKSWAGEN GOLF GTI 1,8 8V-16V sp.1,9mm (66311)
€
€
€
121,28
142,86
121,28
GUA008
GUA009
GUA008C
GUA008C1
GUA009C
ANEL-2
GUA010
GUA013
GUA011
GUA012
GUA010S
GUA011S
GUA010C
GUA011C
GUA012C
ANEL1
GUA0142
GUA0141
GUA019
GUA020
GUA021
GUA027
GUA060-1
GUA061
GUA062
GUA063
GUA014
GUA015
GUA017
GUA018
MANY OTHER NEW SPESSO GASKETS ARE IN DEVELOP. Please ask for your needs.
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
17
[5:3] BLOW OFF valves fuel line accessories
TURBO dump valves are manufactured by Advance Innovation Technology.Options include silicon rubber and kevlar valve
seals with closed circuit venting or direct venting to air . These units for competition & fast road use reduce turbo lag &
turbine stalling.
Ref.
Description
AIT-B-OFF K
Turbo dump valve ventil to air
AIT B-DEB-K
Turbo dump valve for recyrcle closed circuit
AIT B-DEB-KS
as above for SUBARU Impreza till 99 m.y.
AIT B-KS99
as above for SUBARU Impreza '99 -'00 m.y.
AIT B-KS01
as above for SUBARU Impreza '01 m.y. on
AIT-B-RIC
rebuilt kit (membrane,spring,cup and naylon rings)
AIT-B-RIC 2
heavy duty spring "type 2" with nylon rings
AIT-B-RIC 3
heavy duty spring "type 3" with nylon rings
AIT-W-G
Valvle Vaste Gate universal
AIT-OFF-AJ10
Dump valve-piston type adjustable
AIT-DEB-AJ10
Recycle closed circuit, dump valve-piston type
AIT-W-G07
Valve Vaste Gate universal
AIT-W-GKS
Valve Vaste Gate for SUBARU Impreza
AIT-FL SUB99
Subaru Impreza '99 flange adapter for all our blow of valve
AIT-FL SUB01
Subaru Impreza '01 flange adapter for all our blow of valve
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (c)
141,35
107,43
110,82
141,35
141,35
53,75
26,57
26,57
136,83
123,26
123,26
136,83
203,54
54,28
54,28
[5:4] Fuel and oil line accessories
Ref.
Description
EURO (c)
FU51501
Fuel pressure regulator (injection) - 10AN 1,72bar -> 6,2bar (25-90 PSID)
(b) €
204,00
FU51502-2
Fuel pressure regulator (injection) - 6AN 1,72bar -> 6,2bar (25-90 PSID)
(b) €
204,00
FU51504-5
Fuel pressure regulator (carburettors) -6AN 0,28bar -> 0,83bar (4-12 PSID)
(b) €
204,00
FU51505
Fuel pressure regulator (injection) - 10AN as above
€
190,00
FU52501
FU54501-2
FU54502
AIT-WFR305
AIT-WFR505
AIT-WFR2
AIT-CR9411
AIT-ARL1
WFP501
WFP502
FACET-RED
FACET-RAC-D
FACET-RED-90
FACET-SOL
T0316010106
T0316012
T0316515
T0316516
TC43-180
TC43-330
TC43-33045
TC43-90
TE513
TE520
TE521
TE530
AIT510A
AIT510C
Fuel pressure regulator (injection) on line - 6AN 1,72bar -> 6,2bar (25-90 PSID)
Fuel pressure regulator (injection) -6 AN 1,72bar -> 6,2bar (25-90 PSID) (Little)
Fuel pressure regulator (injection) -6 AN (Little)
Injection system fuel pressure regulator (high pressure 0-5 bar)
Injection system fuel pressure regulator (high pressure 0-5 bar)
Fuel pressure regulator (injection) ( 0,3-15 bar )
Carburettor system fuel pressure regulator (low pressure 0,07-0,34 bar)
Electronic Rpm limiter
Electric in-line fuel pump 0,34bar -> 0,62bar. / 90-130 Lt/h port
Electric in-line fuel pump 0,17bar -> 0,32bar. / 90-130 Lt/h port
Facet Red pump for carburettors 0,30bar a 0,41bar
Straight fittings for Faced red pumps
90° degree fittings for Faced red pumps
Pompa benzina Facet Solenoide
Titan three stages oil pump 180° fitting s with pulley and fittings
Titan three stages oil pump 90° fittings wi th pulley and fittings
Oil pump flanged union -10 jic 90° for Tita n / Pace oil pump
Oil pump flanged union -10 jic for Titan / Pace oil pump
Laminova oil heat exchanger lenght 245mm.
Laminova oil heat exchanger lenght 395mm, diameter bore till 32mm
Laminova oil heat exchanger lenght 395mm, diameter bore till 42mm
Laminova oil heat exchanger lenght 160mm.
Remote takes filter 1/2" fittings
Sandwich block
Takes filter
Sandwich block with thermostat
Adapter fitting for takes filter (EB3-FIAT-VW-FORD-PEUGEOT-OPEL 3/4"x16)
Adapter fitting for takes filter (EB34 Renault 20x1,5)
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
180,00
186,00
186,00
102,00
102,00
345,00
39,00
153,00
64,00
67,00
110,00
4,20
5,20
60,00
900,00
900,00
43,70
43,70
380,00
470,00
580,00
300,00
40,00
40,00
59,21
72,00
9,51
9,51
(b)
(b)
(b)
(b)
(Red colour) (b)
(Blue colour)(b)
(b)
(b)
(b)
Net Price
Net Price
(b)
(b)
(b)
(b)
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
Ref.
AIT-TR40/30
AIT-TR40/40
AIT-TR40/60
AIT-TR40/90
AIT-TR40/110
AIT-TR42/130
AIT-TR42/150
AIT-TR42/200
AIT-TR45/30
AIT-TR45/55
AIT-TR45/127
AIT-TR45/145
AIT-TR48/30
AIT-TR48/50
AIT-TR48/70
AIT-TR48/90
AIT-TR48/105
AIT-TR48/110
AIT-TR48/130
AIT-TR48/150
S140026
S140027
S140028
S140029
Description
Carburettor inlet air home, inside diam. 40mm.,h. 30mm
Carburettor inlet air home, inside diam. 40mm.,h.40mm
Carburettor inlet air home, inside diam. 40mm.,h.60mm
Carburettor inlet air home, inside diam. 40mm.,h.90mm
Carburettor inlet air home, inside diam. 40mm.,h.110mm
Carburettor inlet air home, inside diam. 42mm.,h.130mm
Carburettor inlet air home, inside diam. 42mm.,h.150mm
Carburettor inlet air home, inside diam. 42mm.,h.200mm
Carburettor inlet air home, inside diam. 45mm.,h. 30mm
Carburettor inlet air home, inside diam. 45mm.,h. 55mm
Carburettor inlet air home, inside diam. 45mm.,h. 127mm
Carburettor inlet air home, inside diam. 45mm.,h. 145mm
Carburettor inlet air home, inside diam. 48mm.,h.30mm
Carburettor inlet air home, inside diam. 48mm.,h.50mm
Carburettor inlet air home, inside diam. 48mm.,h.70mm
Carburettor inlet air home, inside diam. 48mm.,h.90mm
Carburettor inlet air home, inside diam. 48mm.,h.105mm
Carburettor inlet air home, inside diam. 48mm.,h.110mm
Carburettor inlet air home, inside diam. 48mm.,h.130mm
Carburettor inlet air home, inside diam. 48mm.,h.150mm
3 l. header tank. Dimension : diam. 122mm. , lenght 268mm.
Fuel swirl pot. Dimension : diam. 80mm. , lenght 245mm.
2 l. header tank. Dimension : diam. 122mm. , lenght 180mm.
Fuel swirl pot.With -6 fittings. Dimension : diam. 80mm. , lenght 245mm.
18
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
cad.
(a)
(a)
(a)
(a)
€uro (b)
€
40,00
€
40,00
€
40,00
€
44,00
€
65,00
€
70,00
€
72,00
€
78,00
€
40,00
€
40,00
€
70,00
€
74,00
€
40,00
€
40,00
€
40,00
€
44,00
€
56,00
€
60,00
€
70,00
€
74,00
€
83,00
€
77,00
€
77,00
€
77,00
[5:5] ADVANCED INNOVATION TECHNOLOGY Silicone hoses
Advanced Innovation Technology has now his own silicone hoses production.
These hoses are designed for continuos use in heating and coolant system at temperatures from -60°C+17 0°C.
The brust pression renge is between 5,6 and 12,7 bars.The raccomended working pressure from 2,1 to 4,2 bar ( the
pressure dependent on shape and size). Finishing colours is shining blue. The straight lengths are of 1 mtr
with inside diameter ranging from 6mm to 127mm. Advanced Innovation Technology manufacture include elbow of any
angle, reduces, multiple bend, convoluted and corrugated or spiral reinforced hoses: quotations on demand.
Ref.
AHL 6,5
AHL 8
AHL 9,5
AHL 11
AHL 13
AHL 16
AHL 19
AHL 22
AHL 25
AHL 28
AHL 30
AHL 32
AHL 35
AHL 38
AHL 41
AHL 45
AHL 48
AHL 51
AHL 54
AHL 57
AHL 60
AHL 63
AHL 70
AHL 76
AHL 80
AHL 83
AHL 89
AHL 102
STRAIGHT HOSES
Description
Straight 1 mt. Lenght I.d. 6,5mm
Straight 1 mt. Lenght I.d. 8mm
Straight 1 mt. Lenght I.d. 9,5mm
Straight 1 mt. Lenght I.d. 11mm
Straight 1 mt. Lenght I.d. 13mm
Straight 1 mt. Lenght I.d. 16mm
Straight 1 mt. Lenght I.d. 19mm
Straight 1 mt. Lenght I.d. 22mm
Straight 1 mt. Lenght I.d. 25mm
Straight 1 mt. Lenght I.d. 28mm
Straight 1 mt. Lenght I.d. 30mm
Straight 1 mt. Lenght I.d. 32mm
Straight 1 mt. Lenght I.d. 35mm
Straight 1 mt. Lenght I.d. 38mm
Straight 1 mt. Lenght I.d. 41mm
Straight 1 mt. Lenght I.d. 45mm
Straight 1 mt. Lenght I.d. 48mm
Straight 1 mt. Lenght I.d. 51mm
Straight 1 mt. Lenght I.d. 54mm
Straight 1 mt. Lenght I.d. 57mm
Straight 1 mt. Lenght I.d. 60mm
Straight 1 mt. Lenght I.d. 63mm
Straight 1 mt. Lenght I.d. 70mm
Straight 1 mt. Lenght I.d. 76mm
Straight 1 mt. Lenght I.d. 80mm
Straight 1 mt. Lenght I.d. 83mm
Straight 1 mt. Lenght I.d. 89mm
Straight 1 mt. Lenght I.d. 102mm
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
€
EURO (c)
21,71
22,81
23,60
24,02
24,31
24,57
26,35
28,13
29,91
31,69
32,88
34,06
35,84
37,62
39,40
41,77
45,33
45,33
47,11
48,89
50,67
52,45
56,60
77,16
80,32
82,70
87,44
97,72
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com
Price list effective from
01 January 2014
TECNO 2 S.r.l.
Ref.
ELBOWS
Description
AE 6,5
AE 8
AE 9,5
AE 11
AE 13
AE 16
AE 19
AE 22
AE 25
AE 28
AE 32
Elbow 6,5 mm I.d.
Elbow 8 mm I.d.
Elbow 9,5 mm I.d.
Elbow 11 mm I.d.
Elbow 13 mm I.d.
Elbow 16 mm I.d.
Elbow 19 mm I.d.
Elbow 22 mm I.d.
Elbow 25 mm I.d.
Elbow 28 mm I.d.
Elbow 32 mm I.d.
AE 35
AE 38
19
€
€
€
€
€
€
€
€
€
€
€
90°
EURO (c)
10,76
10,82
10,89
10,95
11,01
11,39
11,86
12,33
12,81
13,28
13,91
€
€
€
€
€
€
€
€
€
€
€
45°
EURO (c)
12,33
12,40
12,46
12,52
12,58
11,38
11,85
12,33
12,81
13,28
13,91
Elbow 35 mm I.d.
€
14,38
€
14,38
Elbow 38 mm I.d.
€
14,85
€
14,85
AE 41
Elbow 41 mm I.d.
€
15,33
€
15,33
AE 45
Elbow 45 mm I.d.
€
15,96
€
15,96
AE 48
Elbow 48 mm I.d.
€
16,43
€
16,43
AE 51
Elbow 51 mm I.d.
€
16,90
€
16,90
AE 54
Elbow 54 mm I.d.
€
17,38
€
17,38
AE 57
Elbow 57 mm I.d.
€
17,85
€
17,85
AE 60
Elbow 60 mm I.d.
€
18,32
€
18,32
AE 63
Elbow 63 mm I.d.
€
18,79
€
18,79
AE 70
Elbow 70 mm I.d.
€
23,41
€
23,41
AE 76
Elbow 76 mm I.d.
€
29,83
€
29,83
AE 80
Elbow 80 mm I.d.
€
30,82
€
30,82
AE 83
Elbow 83 mm I.d.
€
31,56
€
31,56
AE 89
Elbow 89 mm I.d.
€
33,04
€
33,04
AE102
Elbow 102 mm I.d.
€
36,26
€
36,26
Ref.
Description
ALUMINIUM BENDS
90°
45°
EURO (b)
EURO (b)
AIT-ALU32
Aluminium bends 32 mm (1 1/4")
€
21,12
€
21,12
AIT-ALU35
Aluminium bends 35 mm (1 3/8")
€
23,62
€
23,62
AIT-ALU38
Aluminium bends 38 mm (1 1/2")
€
24,66
€
24,66
AIT-ALU45
Aluminium bends 45 mm (1 3/4")
€
26,58
€
26,58
AIT-ALU51
Aluminium bends 51 mm (1")
€
33,86
€
33,86
AIT-ALU57
Aluminium bends 57 mm (1/4")
€
34,86
€
34,86
AIT-ALU63
Aluminium bends 61 mm (1/2")
€
36,11
€
36,11
Prices quoted are correct at date of print but may change without notification.
Many Advanced Innovation Technology products are sold for competition use only & TECNO 2 can
not be held responsible for any use against the law of the land or damage caused by
poor or incorrect fitting which may affect any vehicle manufacturer warranty.
Goods supplied incomplete or inoperative upon receipt will be completed or
exchange within 8 working days f.o.c. upon receipt of the defective parts and
relevant paperwork / invoicing.
TECNO 2 s.r.l. - Strada del Cascinotto 139/43 - Torino (TO) - ITALY
www.tecno2.com
Phone +39 011 8224969 Fax +39 011 8225073
www.aitechitaly.com

District Quota Admission

2013-2014モデル

Sonderpreisliste 2015

IPL, T540XP, Chain Saw - M