FG20341 12 Volt 3.4 Ah FG series

FG20341
FG20721 is a general purpose application battery. Within the FG range Fiamm
offer 6V and 12V monoblocs at various amp hour capacities enable the right
battery selection for each requirement. FIAMM Sealed Power is a Manufacturer
of VRLA batteries; and is supported by a dedicated sales network with market
knowledge and experience of small sealed lead acid battery applications.
FIAMM Sealed Power
FG series
12 Volt
3.4 Ah
Features
Nominal Voltage
12 Volt
Nominal Capacity
3.4 Ah at 20 hours rate to 1.75 Vpc at 25 °C
Float charging voltage
13.50 - 13.80 V/bloc at 25 °C
Boost charge voltage
14.40 - 15.00 V/bloc at 25 °C
Float voltage compensation
-18mV/°C
Maximum charging current
0.85 A
Case
ABS with HB flammability rate (according UL94)
Internal resistance
106 mΩ in full charged conditionΩ
Weight
1.41 kg
Dimensions
L x W x H (TH): 134 x 67 x 60 (67)
Operative temperature range
-20 °C to 50 °C
Storage
As batteries lose part of their capacity, during storage, due to self discharge.
Fiamm Sealed Power recommends FG range of batteries can be stored for 6 months
at an ambient temperature of 20 and 25 °C (see attached graph on reverse). Longer
storage requires a recharge. This should be carried out in line with Fiamm Sealed
Power recommended method; 2.4 V/cell for no longer than 24 hours at 20 °C
Faston 4.8 mm
4.75
3.4
67
60
www.fiamm.com
FG 20341
12V 3.4Ah
Rechargeable Lead Acid Battery
6.45
9.87
0.8
NON SPILLABLE BATTERY
RISK OF FIRE, EXPLOSION OR BURN
DO NOT DISASSEMBLE, HEAT ABOVE 50°C OR INCINERATE
BATTERY MUST BE RECYCLED
11.7
Charging Instruction (at 20°C)
STANDBY USE CYCLIC USE
14.4 - 15.0 V
13.50 - 13.80 V
0.85 A MAX
VOLTAGE REGULATION
INITIAL CURRENT
67
The dimensions have
a tollerance of : ± 1.6%
134
FG series
100
Capacity loss
during storage
at various
temperatures
The battery can be used
without refreshing charge
80
Refreshing charge at 2.4
Vpc for 24 hours (at 2025°C) must be applied as
soon as possible.
5°C
60
Refreshing charge of 2.4
Vpc may be insufficient to
recover the battery capacity.
It is important to avoid
this area
0
2
4
6
0.10 C20
60
40
0.05 C20
13
16
18
20
13
Recharged Capacity (%)
12
11
10
12
11
10
2.60 C 2 C
20
0
14
Charging Current (A)
0
Discharge 100%
50%
1
0
1.22 C 0.68 C
0.26 C
0.10 C
0.05 C
9
10
100
1.000
10.000
Discharge time (min)
0
10
5
15
20
25
Charging time (h)
Constant Current discharge table (Amperes)
end voltage
5 min
10 min
15 min
20 min
30 min
45 min
1 hour
2 hour
3 hour
5 hour
10 hour
20 hour
09.60
10.6
7.11
5.59
4.63
3.55
2.62
2.13
1.21
0.86
0.56
0.31
0.18
09.90
9.88
6.83
5.39
4.52
3.47
2.57
2.10
1.20
0.85
0.55
0.31
0.18
10.02
9.60
6.69
5.30
4.46
3.42
2.54
2.07
1.19
0.85
0.55
0.31
0.17
10.20
9.32
6.55
5.20
4.40
3.37
2.52
2.05
1.18
0.84
0.55
0.31
0.17
10.50
8.76
6.25
4.97
4.18
3.24
2.45
2.00
1.15
0.83
0.54
0.30
0.17
10.80
8.30
5.96
4.77
3.98
3.13
2.37
1.90
1.10
0.79
0.51
0.29
0.17
Constant Power discharge table (Watts per bloc)
end voltage
5 min
10 min
15 min
20 min
30 min
45 min
1 hour
2 hour
3 hour
5 hour
10 hour
20 hour
09.60
106
74.1
59.3
49.7
38.7
29.1
24.0
13.8
9.87
6.42
3.61
2.05
09.90
99.2
71.3
57.3
48.7
38.0
28.6
23.7
13.7
9.81
6.41
3.60
2.05
10.02
96.5
69.9
56.4
48.1
37.5
28.4
23.4
13.6
9.78
6.38
3.60
2.05
10.20
93.8
68.5
55.4
47.6
37.0
28.1
23.2
13.5
9.75
6.38
3.59
2.04
10.50
88.4
65.5
53.2
45.3
35.8
27.5
22.7
13.3
9.61
6.28
3.57
2.03
10.80
84.2
62.8
51.3
43.5
34.8
26.7
21.7
12.8
9.23
6.02
3.46
1.99
FIAMM reserves the right to change or revise without notice any information or detail given in this pubblication
80
12
10
Discharge curves at different current / final voltage (at 25°C)
Battery Voltage (V)
100
Battery Voltage (V)
14
Charging Voltage (V)
120
8
Storage Time (months)
15
Charging Current (A)
Recharged Capacity (%)
140
25°C
40
MH27960
Battery Voltage and Charge Time for Standby Use (at 25°C)
30°C
40°C
Remaining Capacity (%)
FG20341_Ver_1_02/22/2008
FIAMM Sealed Power

Download Report