ÖLFLEX® VFD SLIM ÖLFLEX® VFD XL

MOTOR &
DRIVE
ÖLFLEX® VFD SLIM
Reduced-Diameter VFD Cable; 600/1000V; UL & c(UL) TC Approval
Construction
Conductors: Finely stranded tinned copper
Insulation: “Lapp Surge Guard” insulation system
Shielding: Barrier tape; triple layer foil tape (100% coverage); tinned copper braid (85% coverage)
Jacket: Specially formulated black PVC
Technical Data
Minimum Bend Radius:
7.5 x cable diameter
Temperature Range:
- UL/CSA TC:
- for stationary use:
- for flexible use:
-25°C to +90°C
-40°C to +105°C
-25°C to +105°C
Nominal Voltage:
- UL/CSA TC:
- UL WTTC:
- UL Flexible
Motor Supply:
Part
Number
Size / Number
of Conductors
(incl. ground)
761804
761604*
761404
761204
761004
760804
760604
760404
760204
18 AWG/4c
16 AWG/4c
14 AWG/4c
12 AWG/4c
10 AWG/4c
8 AWG/4c
6 AWG/4c
4 AWG/4c
2 AWG/4c
600V
1000V
Class 5 fine wire
Class K fine wire
Color Code:Black with white numbers,
plus green/yellow ground
Approvals:
UL:
1000V
TC-ER per UL 1277
MTW per UL 1063
WTTC per UL 2277
AWM 20886
* 18 AWG meets only the Class 5 cross section
and DC resistance
Nominal Outer
Diameter
(in)
(mm)
0.394
0.465
0.514
0.583
0.697
0.829
1.002
1.186
1.395
Conductor Stranding:
- 18 - 6 AWG*:
- 4 - 2 AWG:
Approx.
Weight
(lbs/mft)
SKINTOP®
MS-SC
PG Thread
SKINTOP®
MS-M
BRUSH
112
154
194
254
346
596
785
965
1339
53112230
53112240
53112240
53112250
53112260
53112260
53112270
53112270
—
—
53112676
53112676
53112676
53112677
53112678
53112678
53112679
53112680
10.0
11.8
13.1
14.8
17.7
21.1
25.5
30.1
35.4
Attributes:
UL Oil Res I/II
75°C Wet; 90°C Dry
-40°C Cold Bend;
-25° Cold Impact
Sunlight Resistant
Submersible Pump
(14 AWG & larger)
Direct Burial
NFPA 79 2012
NEC:Class 1 Division 2 per NEC
Articles 336, 501
Canada: c(UL) CIC/TC FT4
CSA AWM I/II A/B FT4
Additional: MSHA P-07KA050013-MSHA
CE & RoHS
Cable Attributes, page 73
OR-03
FR-03
FL-01
MP-03
OIL
FLAME
MOTION
MECH
* 16 AWG cable has a drain wire
MOTOR &
DRIVE
ÖLFLEX® VFD XL
Precision Control VFD Cable; 600/1000V; UL & c(UL) TC Approval
Construction
Conductors: Finely stranded tinned copper
Insulation: XLPE
Shielding: Barrier tape; triple layer foil tape (100% coverage);
tinned copper braid (85% coverage)
Jacket: Specially formulated black PVC
Technical Data
Minimum Bend Radius:
7.5 x cable diameter
Temperature Range:
- UL/CSA TC:
- for stationary use:
- for flexible use:
-25°C to +90°C
-40°C to +105°C
-25°C to +105°C
Nominal Voltage:
- UL/CSA TC:
- UL WTTC:
- UL Flexible
Motor Supply:
Part
Number
Size / Number
of Conductors
(incl. ground)
731604
731404
731204
731004
730804
730604
730404
730204
16 AWG/4c
14 AWG/4c
12 AWG/4c
10 AWG/4c
8 AWG/4c
6 AWG/4c
4 AWG/4c
2 AWG/4c
600V
1000V
Conductor Stranding:
- 16 - 8 AWG:
- 6 - 2 AWG:
Class 5 fine wire
Class K fine wire
Color Code:Black with white numbers,
plus green/yellow ground
Approvals:
UL:
TC-ER per UL 1277
WTTC per UL 2277
Attributes:
NEC:
Canada:
Additional:
UL Oil Res I/II
90°C Wet or Dry
-40°C Cold Bend;
-25°C Cold Impact
Sunlight Resistant
Direct Burial
NFPA 79 2012
Class 1 Division 2 per NEC
Articles 336, 501
c(UL) CIC/TC FT4
CE & RoHS
1000V
Nominal
Outer Diameter
(in)
(mm)
0.508
0.581
0.649
0.700
0.887
1.022
1.158
1.332
12.9
14.8
16.5
17.8
22.5
25.9
29.4
33.8
Approx.
Weight
(lbs/mft)
SKINTOP®
MS-SC
PG Thread
SKINTOP®
MS-M BRUSH
Metric Thread
167
214
274
361
571
885
1136
1460
53112240
53112250
53112250
53112260
53112260
53112270
53112270
—
53112676
53112676
53112677
53112677
53112678
53112678
53112679
53112679
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
Cable Attributes, page 73
OR-03
FR-03
FL-01
MP-03
OIL
FLAME
MOTION
MECH
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
35
MOTOR &
DRIVE
ÖLFLEX® VFD with Signal
Flexible VFD Cable with a Pair for Signal or Temperature Sensor; 600/1000V; UL & c(UL) TC Approval
Construction
Conductors: Finely stranded tinned copper
Insulation: “Lapp Surge Guard” insulation system
Shielding: Barrier tape; triple layer foil tape (100% coverage);
tinned copper braid (85% coverage)
Jacket: Specially formulated black PVC
Technical Data
Minimum Bend Radius:
7.5 x cable diameter
Temperature Range:
- UL/CSA TC:
- for stationary use:
- for flexible use: -25°C to +90°C
-40°C to +105°C
-25°C to +105°C
Nominal Voltage:
- UL/CSA TC:
- UL WTTC:
- UL Flexible
Motor Supply:
Approvals:
UL:
1000V
Size / Number
of Conductors
1 Shielded Pair
for Signal
7416048
7414048
7414044
7412048
7412044
7410044
7408044
7406044
16 AWG/4c
14 AWG/4c
14 AWG/4c
12 AWG/4c
12 AWG/4c
10 AWG/4c
8 AWG/4c
6 AWG/4c
18 AWG
18 AWG
14 AWG
18 AWG
14 AWG
14 AWG
14 AWG
14 AWG
Conductor Stranding:
- 18 - 6 AWG: - 4 AWG:
Color Code: 600V
1000V
Part
Number
MOTOR &
DRIVE
Nominal
Outer Diameter
(in)
(mm)
0.519
0.573
0.600
0.632
0.662
0.745
0.896
1.026
13.2
14.6
15.2
16.1
16.8
18.9
22.8
26.1
Class 5 fine wire
Class K fine wire
lack with white numbers,
B
plus green/yellow ground; one
black pair with white numbers
TC-ER per UL 1277
MTW per UL 1063
WTTC per UL 2277
AWM 20886
Approx.
Weight
(lbs/mft)
SKINTOP®
MS-SC
PG Thread
SKINTOP®
MS-M BRUSH
Metric Thread
180
216
254
286
326
406
617
848
53112240
53112250
53112250
53112250
53112250
53112260
53112260
53112270
53112676
53112676
53112676
53112677
53112677
53112677
53112678
53112678
Attributes:
UL Oil Res I/II
75°C Wet; 90°C Dry
-40°C Cold Bend;
-25°C Cold Impact
Sunlight Resistant
Direct Burial
Submersible Pump
(14 AWG & larger)
Bus Drop
NFPA 79 2012
NEC: Class 1 Division 2 per NEC
Articles 336, 501
Canada: c(UL) CIC/TC FT4
CSA AWM I/II A/B FT4
Additional: MSHA P-07-KA050011-MSHA
CE & RoHS
Cable Attributes, page 73
OR-03
FR-03
FL-01
MP-03
OIL
FLAME
MOTION
MECH
V 2000
VFD Symmetrical 2kV Motor Supply Cable for Large HP VFD Drives; UL TC-ER Approval
Construction
Conductors: Bare stranded copper
Insulation: XLPE + 3 bare stranded copper grounds
Shielding: Helical copper tape (100% coverage)
Jacket: Black PVC
Technical Data
Conductor Stranding:
Minimum Bend Radius:
15 x cable diameter
Temperature Range:
-25°C to +90°C
Color Code: Class B stranded wire
lack with white numbers: 1,
B
2, 3, plus 3 bare symmetrical
grounds
Nominal Voltage:
- UL TC:
600/2000V
Approvals:
UL:
Attributes:
NEC:
Part
Number
Size / Number
of Conductors
3 Symmetrical
Grounds
812984
812985
812986
812987
812988
812989
812990
812991
1 AWG/3c
1/0 AWG/3c
2/0 AWG/3c
3/0 AWG/3c
4/0 AWG/3c
250 KCMIL/3c
350 KCMIL/3c
500 KCMIL/3c
8 AWG
6 AWG
6 AWG
5 AWG
4 AWG
2 AWG
2 AWG
1 AWG
36
Nominal
Outer Diameter
(in)
(mm)
1.26
1.35
1.44
1.55
1.73
1.90
2.12
2.40
32.0
34.3
36.6
39.4
43.4
48.3
53.8
61.0
Approx.
Weight
(lbs/mft)
SKINTOP®
MS-M BRUSH
Metric Thread
1427
1836
2137
2609
3254
3988
5106
6886
53112679
53112679
53112680
53112680
53112680
53112681
53112681
53112501
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
TC-ER per UL 1277
90°C Wet or Dry
Sunlight Resistant
Direct Burial
NFPA 79 2012
Class 1 Division 2: Hazardous
Locations
Class 1: Control Circuit
Cable Attributes, page 73
OR-01
FR-03
FL-01
MP-02
OIL
FLAME
MOTION
MECH
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
MOTOR &
DRIVE
ÖLFLEX® SERVO FD 796 P
High-Acceleration Continuous Flex Servo Cable with PUR Jacket; Unshielded
Construction
Conductors: Extra fine bare copper
Pairs: 1 pair: twisted together; tinned copper braid (85% coverage);
2 pair: laminated foil shield; drain wire; tinned copper braid (85%
coverage)
Insulation: Polypropylene
Jacket: Black polyurethane
Cable Attributes, page 73
Acceleration: up to 50m/s3
Travel speed: up to 5m/s
Travel length: up to 100m
OR-05
FR-02
CF-04A
MP-05
OIL
FLAME
MOTION
MECH
Technical Data
Test Voltage:
Minimum Bend Radius:
- for continuous flexing:
- for stationary use:
7.5 x cable diameter
4 x cable diameter
Temperature Range:
- for continuous flexing:
- for stationary use:
-40°C to +80°C
-50°C to +80°C
Nominal Voltage:
- UL/CSA:
- IEC:
1000V
600/1000V
Part
Number
0025319
0025320
0025321
0025322
0025323
0025324
0025326
0025327
0025328
0025312
0025329
0025330
Conductor Stranding:Class 6 super fine
wire
Color Code:
- Power:Black with white print:
U/L1/C/L+; V/L2; W/L3/D/L plus green/yellow ground
- 1 pair: Black & white
- 2 pair: Black with white numbers:
5, 6, 7, 8
Max.
Outer Diameter
(in)
(mm)
Size / Number of Conductors
Power Conductors + Control Pairs
16 AWG/4c
14 AWG/4c
12 AWG/4c
10 AWG/4c
8 AWG/4c
6 AWG/4c
19 AWG/4c
16 AWG/4c
14 AWG/4c
12 AWG/4c
12 AWG/4c
10 AWG/4c
+
+
+
+
+
+
+
+
+
+
+
+
4000V
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
2 x (22 AWG/1pr)
2 x (19 AWG/1pr)
2 x (18 AWG/1pr)
2 x (18 AWG/1pr)
(18 AWG/1pr) + (16 AWG/1pr)
(18 AWG/1pr) + (16 AWG/1pr)
0.461
0.516
0.559
0.630
0.724
0.870
0.429
0.484
0.563
0.606
0.614
0.673
11.7
13.1
14.2
16.0
18.4
22.1
10.9
12.3
14.3
15.4
15.6
17.1
Approvals:
UL:
Attributes:
Canada:
Additional:
Approx.
Weight
(lbs/mft)
SKINTOP®
MS-SC
PG Thread
SKINTOP®
MS-M BRUSH
Metric Thread
146
181
224
271
390
596
96
140
206
256
261
309
53112240
53112240
53112250
53112250
53112260
53112650
53112230
53112240
53112250
53112250
53112250
53112260
53112676
53112676
53112676
53112676
53112677
53112678
53112676
53112676
53112676
53112676
53112676
53112677
AWM 20234
VW-1
cRU AWM I/II A/B 1kV FT1
VDE Reg. no 8591 (16 AWG &
larger)
CE & RoHS
( ) = shielded pairs
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
37
MOTOR &
DRIVE
ÖLFLEX® SERVO FD 796 CP
High-Acceleration Continuous Flex Servo Cable with PUR Jacket; Shielded
Construction
Conductors: Extra fine bare copper
Pairs: One pair: shielded with tinned copper serve wires; nonwoven wrapping; Two core pairs arranged as pair: shielded with
foil, drain wire, tinned copper serve wires; non-woven wrapping
twisted together
Insulation: Power and pair conductors: polypropylene
Shielding: Overall non woven wrapping; overall tinned copper braid
Jacket: Orange polyurethane
Technical Data
Minimum Bend Radius:
- for continuous flexing:
- for stationary use:
see table below
4 x cable diameter
Temperature Range:
- for continuous flexing:
- for stationary use:
-40°C to +80°C
-50°C to +80°C
Nominal Voltage:
- UL/CSA:
- IEC U0/U:
Conductor Stranding:
Part
Number
0027950
0027951
0027952
0027953
0027954
0027955
0027956
0027957
0027958
0027959
0027960
0027961
0027962
0027963
0027964
0027965
0027966
0027967
0027969
0027970
0027971
0027972
0027973
0027974
0027975
0027976
0027977
Approvals:
UL:
Attributes:
Canada:
Additional:
1000V
600/1000V
Class 6 super
fine wire
Size / Number of Conductors
Power Conductors + Control Pairs
16 AWG/4c
14 AWG/4c
12 AWG/4c
10 AWG/4c
8 AWG/4c
6 AWG/4c
4 AWG/4c
2 AWG/4c
1 AWG/4c
16 AWG/4c
14 AWG/4c
12 AWG/4c
10 AWG/4c
8 AWG/4c
6 AWG/4c
4 AWG/4c
2 AWG/4c
1 AWG/4c
16 AWG/4c
14 AWG/4c
12 AWG/4c
10 AWG/4c
8 AWG/4c
6 AWG/4c
4 AWG/4c
2 AWG/4c
1 AWG/4c
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Cable Attributes, page 73
Color Code:
- Power:Black conductors with white
letters: U/L1/C/L+; V/L2; W/L3/D/L plus green/yellow ground
- 1 pair: Black & white
- 2 pair: Black with white numbers:
5, 6, 7, 8
—
—
—
—
—
—
—
—
—
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
(16 AWG/1pr)
2 x (19 AWG/1pr)
2 x (18 AWG/1pr)
(18 AWG/1pr) + (16 AWG/1pr)
(18 AWG/1pr) + (16 AWG/1pr)
(18 AWG/1pr) + (16 AWG/1pr)
2 x (16 AWG/1pr)
2 x (16 AWG/1pr)
2 x (16 AWG/1pr)
2 x (14 AWG/1pr)
Acceleration: up to 50m/s3
Travel speed: up to 5m/s
Travel length: up to 100m
AWM 20234
Flame Retardant
VW-1
cRU AWM I/II A/B 1kV FT1
VDE Reg. no 859
CE & RoHS
Min. Bend Radius
for Cont. Flexing
(x cable diameter)
7.5
7.5
7.5
7.5
7.5
7.5
10
10
10
7.5
7.5
7.5
7.5
7.5
7.5
10
10
10
7.5
7.5
7.5
7.5
7.5
7.5
10
10
10
Nominal
Outer Diameter
(in)
(mm)
0.362
0.418
0.469
0.567
0.693
0.867
0.993
1.131
1.316
0.473
0.544
0.587
0.670
0.764
0.938
1.064
1.229
1.367
0.481
0.575
0.642
0.713
0.859
1.005
1.139
1.237
1.450
9.2
10.6
11.9
14.4
17.6
22.0
25.2
28.7
33.4
12.0
13.8
14.9
17.0
19.4
23.8
27.0
31.2
34.7
12.2
14.6
16.3
18.1
21.8
25.5
28.9
31.4
36.8
OR-05
FR-02
CF-04A
MP-05
OIL
FLAME
MOTION
MECH
Approx.
Weight
(lbs/mft)
SKINTOP®
MS-SC
PG Thread
SKINTOP®
MS-M BRUSH
Metric Thread
94
132
180
267
397
642
898
1189
1658
175
214
259
327
471
704
1030
1409
1829
210
265
326
395
550
763
1048
1406
1962
53112220
53112230
53112240
53112250
53112260
53112260
53112270
53112270
—
53112240
53112240
53112250
53112250
53112260
53112260
53112270
53112270
—
53112240
53112250
53112250
53112260
53112260
53112270
53112270
53112270
—
—
53112676
53112676
53112676
53112677
53112678
53112678
53112679
53112679
53112676
53112676
53112676
53112677
53112677
53112678
53112678
53112679
53112679
53112676
53112676
53112676
53112677
53112678
53112678
53112679
53112679
53112680
( ) = shielded pairs
38
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
MOTOR &
DRIVE
ÖLFLEX® SERVO FD 798 CP
High-Acceleration Continuous Flex Encoder & Resolver Cable; UL & CSA Approval
Construction
Conductors: Extra fine tinned copper
Pairs: Twisted and bundled; shielded (see chart)
Insulation: Polypropylene
Shielding: Tinned copper braid (85% coverage)
Jacket: Green polyurethane
Extra fine wire
Color Code:
See following color chart
Approvals:
UL:
Attributes:
Canada:
Additional:
-50°C to +80°C
-40°C to +80°C
Maximum
Outer Diameter
(in)
(mm)
Power Conductors + Control Pairs
20 AWG/4c
2 x (20 AWG/1c)
26 AWG/4c
26 AWG/4c + 26 AWG/4c
20 AWG/9c
18 AWG/2c
20 AWG/2c
26 AWG/10c
26 AWG/10c + 20 AWG/4c
20 AWG/4c
—
—
—
24 AWG/12c
20 AWG/2c
20 AWG/4c + (26 AWG/4c)
20 AWG/2c
20 AWG/2c
+
+
+
+
+
+
+
+
+
+
+
+
22 AWG/4pr
3 x (26 AWG/1pr)
3 x (26 AWG/1pr) + 20 AWG/1pr
3 x (26 AWG/1pr) + 20 AWG/1pr
—
24 AWG/4pr
24 AWG/6pr
20 AWG/1pr
—
26 AWG/4pr
24 AWG/4pr
26 AWG/8pr
26 AWG/4pr
—
24 AWG/4pr
26 AWG/2pr + 2 x (26 AWG/1pr)
2 x (24 AWG/1pr)
24 AWG/2pr
0.350
0.350
0.346
0.370
0.346
0.346
0.406
0.303
0.319
0.323
0.299
0.307
0.252
0.272
0.335
0.358
0.343
0.287
8.9
8.9
8.8
9.4
8.8
8.8
10.3
7.7
8.1
8.2
7.6
7.8
6.4
6.9
8.5
9.1
8.7
7.3
AWM 20236
VW-1
CSA AWM I/II A/B FT1
RoHS
MUD acc. to IEC 61892-4
Annex D
Approx.
Weight
(lbs/mft)
SKINTOP®
MS-SC
PG Thread
SKINTOP®
MS-M BRUSH
Metric Thread
84
81
74
87
74
73
81
55
66
64
50
57
35
49
66
91
66
48
53112220
53112220
53112220
53112220
53112220
53112230
53112220
53112220
53112220
53112220
53112220
53112210
53112210
53112210
53112220
53112220
53112210
53112210
—
—
—
53112676
—
53112676
—
—
—
—
—
—
—
—
—
—
—
—
Cable
Attributes,
page 73
OIL
Conductor Stranding:
Size / Number of Conductors
Part
Number
0036910
0036911
0036912
0036913
0036914
0036915
0036916
0036917
0036918
0036920
0036921
0036923
0036924
0036926
0036927
0036928
0036929
0036930
30V
OR-05
FLAME
Temperature Range:
- for stationary use:
- for continuous flexing:
Nominal Voltage:
FR-02
MOTION
Minimum Bend Radius:
- for continuous flexing:
7.5 x cable diameter
- for installation:
4 x cable diameter
( ) = shielded pairs/conductors
Part Number
MP-05
Power Cores
Control Pairs
Size
Color Code & Shielding
Size
Color Code & Shielding
0036910
20 AWG/4c
bl/w — bk/w — r/w — y/w
22 AWG/4pr
bk & br — r & o — y & gn — bl & v
0036911
20 AWG/2c
w — br
26 AWG/3pr
y & gn — r & bl — gy & pk
26 AWG/3pr
20 AWG/1pr
26 AWG/3pr
20 AWG/1pr
y & gn — bk & br — r & o
br/r & br/bl
y & gn — bk & br — r & o
br/r & br/bl
—
br & gn — gy & pk — bl & v — r & bk
w & br — gn & y — gy & pk —
bl & r — bk & v — gy/pk & r/bl
w & br
0036912
0036913
0036914*
0036915*
26 AWG/4c
gy — bl — w/y — w/bk
26 AWG/4c
26 AWG/4c
20 AWG/9c
18 AWG/2c
gy — bl — w/y — w/bk
br/y — br/gy — gn/bk — gn/r
bl — w — r — pk — gn — y — br — bk — gy
w — br
24 AWG/4pr
0036916*
20 AWG/2c
w — br
24 AWG/6pr
0036917
26 AWG/10c
26 AWG/10c
20 AWG/4c
w — br — gn — y — gy —pk — bl — r — bk — v
w — br — gn — y — gy — pk — bl — r — bk — v
w — br — bl — bk
20 AWG/1pr
20 AWG/4c
0036918
0036920
—
w — bl — w/gn — br/gn
26 AWG/4pr
r & bk — br & gn — y & v — gy & pk
0036921
—
24 AWG/4pr
0036923
—
26 AWG/8pr
—
bk — br — r — o — y — gn — bl —
v — gy — w — w/bk — w/br
w — br
w — br — gn — y
w — br — gn — y
pk — gy
w — br
26 AWG/4pr
w & br — gn & y — gy & pk — bl & r
w/y & w/gn — w/r & w/o — w/bk & w/br —
gy & w — bl & v y & gn — r & o — bk & br
bk & br — r & o — y & gn — bl & v
0036924
0036926
26 AWG/12c
0036927*
20 AWG/2c
26 AWG/4c
20 AWG/4c
20 AWG/2c
20 AWG/2c
0036928
0036929*
0036930*
CF-04A
MECH
Technical Data
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
—
24 AWG/4pr
26 AWG/2pr
26 AWG/2pr
24 AWG/2pr
24 AWG/2pr
br & gn — gy & pk — bl & v — r & bk
bl & r — gy & pk
w & br — gn & y
w & br — gn & y
r & bk — gy & pk
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
39
MOTOR &
DRIVE
ÖLFLEX® CHAIN 896 P
High-Acceleration Continuous Flexing Control Cable with PUR Jacket
Construction
Conductors: Extra fine bare copper conductors
Insulation: Polypropylene; non-woven wrapping
Jacket: Black polyurethane
Cable Attributes, page 73
Acceleration: up to 50m/s3
Travel speed: up to 5m/s
Travel length: up to 100m
OR-05
FR-02
CF-04A
MP-05
OIL
FLAME
MOTION
MECH
Technical Data
Minimum Bend Radius:
- for flexible use:
- 16 - 6 AWG:
7.5 x cable diameter
- 4 AWG:
10 x cable diameter
- for stationary use:
4 x cable diameter
Temperature Range:
- for flexible use:
- for stationary use:
40
Nominal Voltage:
- UL/CSA:
1000V
- IEC: 600/1000V
Conductor Stranding:Class 6 super fine
wire
Approvals:
UL:
Attributes:
Canada:
Additional:
Color Code:
Black with white numbers
AWM 20234
VW-1
cRU AWM I/II A/B 1kV FT1
VDE Reg. no. 8661
MUD acc. to
IEC 61892-4 Annex D
CE & RoHS
-40°C to +80°C
-50°C to +80°C
Nominal
Outer Diameter
Part
Number
Size / Number
of Conductors
(incl. ground)
(in)
(mm)
1023229
1023230
1023238
1023239
1023245
1023246
1023248
1023249
1023250
1023251
1023252
1023253
1023254
1023255
16 AWG/4c
16 AWG/5c
14 AWG/4c
14 AWG/5c
12 AWG/4c
12 AWG/5c
10 AWG/4c
10 AWG/5c
8 AWG/4c
8 AWG/5c
6 AWG/4c
6 AWG/5c
4 AWG/4c
4 AWG/5c
0.378
0.394
0.433
0.473
0.493
0.540
0.563
0.619
0.670
0.745
0.835
0.938
1.020
1.143
9.6
10.0
11.0
12.0
12.5
13.7
14.3
15.7
17.0
18.9
21.2
23.8
25.9
29.0
Approx. Weight
(lbs/mft)
SKINTOP®
MS-SC
PG Thread
81
96
117
141
163
212
225
295
338
446
544
843
843
1063
S2113
S2113
S2113
S2116
S2116
S2121
S2121
S2121
S2121
S2129
S2129
S2129
S2136
S2136
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
MOTOR &
DRIVE
Servo Cable according to SIEMENS® Standard 6FX 8 Plus
Highly Flexible Servo Cable for High-Acceleration Continuous Flexing Motion
Construction
Conductors: Signal cables: tinned copper; Power cables: bare copper
Pairs: Twisted together; shielded with tinned copper braid and
non-woven wrap
Insulation: Polypropylene
Shielding: Overall tinned copper braid and non-woven wrap
Jacket: Feedback/signal: green polyurethane; Servo/motor: orange polyurethane
Technical Data
Conductor Stranding:
Minimum Bend Radius:
- for continuous flexing:
- for stationary use: Temperature Range:
- for continuous flexing:
- for stationary use: see table below
4 x cable diameter
-20°C to +60°C
-50°C to +80°C
Color Code:
- Feedback/signal:
- Motor/servo: - 16 - 14 AWG: Nominal Voltage:
- Signal conductors: 30V
- Power/control conductors: 1000V
Part
Number
Cable Type
00277101
00277111
Feedback/Signal
Feedback/Signal
00277121
Feedback/Signal
00277131
Feedback/Signal
00277141
Feedback/Signal
00277151
00277161
00277171
00277992
0027784
0027785
0027786
0027787
0027788
0027789
0027790
0027791
0027792
0027793
0027794
0027795
0027796
0027797
0027798
Feedback/Signal
Feedback/Signal
Feedback/Signal
Feedback/Signal
Motor
Motor
Motor
Motor
Motor
Motor
Servo
Servo
Servo
Servo
Servo
Servo
Servo
Servo
Servo
Part Number
Size / Number of
Conductors
00277101
26 AWG/8pr
00277111
00277121
00277131
00277141
00277151
00277161
00277171
22 AWG/4pr
20 AWG/4c
26 AWG/3pr
20 AWG/2c
26 AWG/3pr
26 AWG/4c
20 AWG/1pr
26 AWG/3pr
26 AWG/4c
26 AWG/4c
20 AWG/2c
26 AWG/4pr
26 AWG/2pr
26 AWG/12c
Size / Number
of Conductors
26 AWG/8pr
22 AWG/4pr + 20 AWG/4c
3 x (26 AWG/1pr) +
2 x (20 AWG/1c)
3 x (26 AWG/1pr) +
26 AWG/4c + 20 AWG/1pr
3 x (26 AWG/1pr) +
26 AWG/4c + 20 AWG/2c +
26 AWG/4c
26 AWG/4pr
26 AWG/2pr
26 AWG/12c
26 AWG/2pr + 21 AWG/1pr
16 AWG/4c
14 AWG/4c
12 AWG/4c
10 AWG/4c
8 AWG/4c
6 AWG/4c
16 AWG/4c + (16 AWG/1pr)
14 AWG/4c + (16 AWG/1pr)
12 AWG/4c + (16 AWG/1pr)
10 AWG/4c + (16 AWG/1pr)
8 AWG/4c + (16 AWG/1pr)
6 AWG/4c + (16 AWG/1pr)
4 AWG/4c + (16 AWG/1pr)
2 AWG/4c + (16 AWG/1pr)
1 AWG/4c + (16 AWG/1pr)
C
lass 6 super fine
wire
see color chart below
Black with white print:
V/L2
U/L1/C/L +
W/L3/D/L plus green/yellow ground
- 12 - 1 AWG:
Approvals:
UL:
Canada:
Additional:
Nominal
Outer Diameter
(in)
(mm)
Min. Bend Radius
Continuous Flexing
(x cable diameter)
SIEMENS®
Part Number
8
8
6FX8008-1BD11
6FX8008-1BD21
0.307
0.350
8
6FX8008-1BD31
8
/L1/C/L +
U
V/L2
W/L3/D/L plus green/yellow ground
AWM 21223
AWM 20236 (sensor leads)
CSA AWM I/II A/B 1kV 80°C
FT1
Based on VDE specifications
CE & RoHS
Approx.
Weight
(lbs/mft)
SKINTOP®
MS-SC
PG Thread
SKINTOP®
MS-M BRUSH
Metric Thread
7.8
8.9
57
81
53112210
53112220
—
—
0.350
8.9
76
53112220
—
6FX8008-1BD41
0.346
8.8
68
53112220
—
8
6FX8008-1BD51
0.370
9.4
93
53112220
53112676
8
8
8
8
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10
10
10
6FX8008-1BD61
6FX8008-1BD71
6FX8008-1BD81
6FX8008-2DC00
6FX8008-1BB11-Plus
6FX8008-1BB21-Plus
6FX8008-1BB31-Plus
6FX8008-1BB41-Plus
6FX8008-1BB51-Plus
6FX8008-1BB61-Plus
6FX8008-1BA11-Plus
6FX8008-1BA21-Plus
6FX8008-1BA31-Plus
6FX8008-1BA41-Plus
6FX8008-1BA51-Plus
6FX8008-1BA61-Plus
6FX8008-1BA25-Plus
6FX8008-1BA35-Plus
6FX8008-1BA50-Plus
0.252
0.197
0.272
0.283
0.359
0.418
0.469
0.571
0.690
0.851
0.457
0.528
0.583
0.662
0.764
0.910
1.048
1.217
1.340
6.4
5.0
6.9
7.2
9.1
10.6
11.9
14.5
17.5
21.6
11.6
13.4
14.8
16.8
19.4
23.1
26.6
30.9
34.0
36
24
51
50
101
148
202
302
444
679
155
202
255
356
514
732
1028
1371
1855
53112220
53112210
53112210
53112210
53112220
53112230
53112240
53112250
53112260
53112260
53112230
53112240
53112250
53112250
53112260
53112660
53112270
53112270
—
—
—
—
—
53112676
53112676
53112676
53112676
53112677
53112678
53112676
53112676
53112676
53112676
53112677
53112678
53112678
53112679
53112679
( ) = shielded pairs
Color Code
w/y & w/gn — w/r & w/o — w/bk & w/br — gy & w — bl & v — y & gn — r & o — bk & br
br & bk — r & o — y & gn — bl & v
w/bl — w/bk — w/r — w/y
y & gn — bk & br — r & o
bk — r
y & gn — bk & br — r & o
gy — bl — w/y — w/bk
br/r & br/bl
y & gn — bk & br — r & o
gy — bl — w/y — w/bk
br/y — br/gy — gn/bk — gn/r
br/r — br/bl
bk & br — r & o — y & gn — bl & v
r & o — bk & br
bk — br — r — o — y — gn — bl — v — gy — w — w/bk — w/br
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
Cable Attributes, page 73
Acceleration: up to 50m/s3
Travel speed: up to 5m/s
Travel length: up to 100m
OR-05
FR-02
CF-04A
MP-05
OIL
FLAME
MOTION
MECH
SIEMENS® is a registered trademark of SIEMENS AG. SIEMENS part
numbers are supplied for informational purposes only.
41
MOTOR &
DRIVE
Servo Cable according to INDRAMAT® Standard INK
Continuous Flex Cable according to INDRAMAT® Standard INK
Construction
Conductors: Finely stranded bare copper
Insulation: Pairs & power conductors: TPE
Pairs: Shielded with foil and tinned copper (not all feedback pairs are shielded)
Shielding: Overall tinned copper braid
Jacket: Orange polyurethane
Technical Data
Conductor Stranding:
Minimum Bend Radius:
- Feedback/signal cables: 10 x cable diameter
- Servo/motor cables:
7.5 x cable diameter
Temperature Range:
- for continuous flexing:
- for stationary use:
Nominal Voltage:
- Feedback/signal cond.: 300V
- Power/control cond:
1000V
-30°C to +80°C
-50°C to +80°C
Class 6 fine wire
Color Code:
- Feedback cables: See color chart below
- Power conductors:Black with white numbers:
1, 2, 3 plus green/yellow
ground
- Control pairs:Black with white numbers:
5/6, 7/8
Part
Number
Cable
Type
Size / Number of Conductors
INDRAMAT®
Part Number
7072400
7072401
7072402
7072414
7072415
7072416
7072417
7072403
7072404
7072405
7072406
7072407
7072408
7072409
7072410
Feedback/Signal
Feedback/Signal
Feedback/Signal
Feedback/Signal
Feedback/Signal
Feedback/Signal
Servo/Motor
Servo/Motor
Servo/Motor
Servo/Motor
Servo/Motor
Servo/Motor
Servo/Motor
Servo/Motor
Servo/Motor
24 AWG/4pr + 18 AWG/2c
24 AWG/4pr + 20 AWG/2c
20 AWG/9c
18 AWG/4c + 26 AWG/4pr + (26 AWG/4c)
2 x (24 AWG/1pr) + 20 AWG/2c
24 AWG/2pr + 20 AWG/2c
19 AWG/4c + 20 AWG/1pr
18 AWG/4c + 2 x (19 AWG/1pr)
16 AWG/4c + 2 x (19 AWG/1pr)
14 AWG/4C + 2 x (18 AWG/1pr)
12 AWG/4c + (18 AWG/1pr) + (16 AWG/1pr)
10 AWG/4c + (18 AWG/1pr) + (16 AWG/1pr)
8 AWG/4c + (18 AWG/1pr) + (16 AWG/1pr)
6 AWG/4c + 2 x (16 AWG/1pr)
4 AWG/4c + 2 x (16 AWG/1pr)
INK-0209
INK-0448
INK-0208
INK-0532
INK-0234
INK-0750
INK-0670
INK-0653
INK-0650
INK-0602
INK-0603
INK-0604
INK-0605
INK-0606
INK-0607
Approvals:
UL:
Canada:
Additional:
Nominal
Outer Diameter
(in)
(mm)
Approx.
Weight
(lbs/mft)
0.347
0.335
0.347
0.382
0.343
0.299
0.394
0.453
0.481
0.595
0.630
0.741
0.867
0.993
1.103
8.8
8.5
8.8
9.7
8.7
7.6
10.0
11.5
12.2
15.1
16.0
18.8
22.0
25.2
28.0
81
67
85
94
60
62
89
152
180
215
316
403
571
685
954
AWM 20234 (servo/motor)
AWM 20236 (signal)
CSA AWM I/II A/B FT1
CE & RoHS
SKINTOP®
MS-MC
PG Thread
SKINTOP®
MS-M BRUSH
Metric Thread
53112220
53112220
53112220
53112220
53112220
53112210
53112230
53112240
53112240
53112250
53112250
53112260
53112260
53112270
53112270
—
—
—
53112676
—
—
53112676
53112676
53112676
53112676
53112676
53112677
53112678
53112678
53112679
( ) = shielded pairs
Part Number
7072400
7072401
7072402
7072414
7072415
7072416
Size / Number
of Conductors
24 AWG/4pr
18 AWG/2c
24 AWG/4pr
20 AWG/2c
20 AWG/9c
26 AWG/4c
26 AWG/4pr
18 AWG/4c
2 x (24 AWG/1pr)
20 AWG/2c
24 AWG/2pr
20 AWG/2c
Cable Attributes, page 73
Color Code
brown & green — gray & pink — blue & violet — red & black
white — brown
brown & green — gray & pink — blue & violet — red & black
white — brown
green — brown — gray — yellow — black — blue — red — white
— pink
yellow/black — blue/black — green/black — red/black
red & black — brown & green — yellow & violet — gray & pink
white — brown/green — white/green — blue
white & brown — green & yellow
pink — gray
red & black — gray & pink
white — brown
OR-05
FR-02
CF-02
MP-05
OIL
FLAME
MOTION
MECH
INDRAMAT® is a registered trademark of Bosch Reroth AG. INDRAMAT part numbers are supplied for informational purposes only.
42
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
MOTOR &
DRIVE
AB Assemblies for Rockwell Automation Motors
Feedback & Power Cable Assemblies for Flexing Applications
All raw cable is Lapp product; datasheets are available on our website or by contacting sales. Assembly drawings are available on our website.
Custom versions are available upon request.
Cable Technical Data
Cable Type:
see table below
Minimum Bend Radius:
Feedback:
- for stationary use:
- cable P/N 812308:
- cable P/N 602206TP:
- for continuous flex:
Power:
- for stationary use:
- for continuous flex:
Power with brake:
- for stationary use:
- for continuous flex:
10 x cable diameter
8 x cable diameter
12 x cable diameter
Nominal Voltage:
- MP series:
- Feedback:300V (stationary)
600V (cont. flex)
- Power/
power with brake:
600V
- TLY series:
- Feedback:
300V
- Power/
power with brake:
600V
Connector Technical Data
Connector Type:
- MP series motors:M23 series
Speedtec type M7
(M4 still available)
- MPF series motors:M23 series
Speedtec type M7
(M4 still available)
- TLY series motors:Tyco CPC; tab-locking
4 x cable diameter
10 x cable diameter
7.5 x cable diameter
10 x cable diameter
Cable Construction
Motion Type
MP Series Motors
Stationary
Stationary
Stationary
Stationary
Continuous Flex
Continuous Flex
TLY Series Motors
Stationary
Stationary
Stationary
Continuous Flex
Continuous Flex
Continuous Flex
Application
Feedback
Feedback
Power
Power with brake
Feedback
Power/
Power with brake
Feedback
Power
Power with brake
Feedback
Power
Power with brake
Jacket
Color
Jacket Material
Jacket
Insulation
Gray
Gray
Black
Black
Green
PVC
PVC
PVC
PVC
TPE
Orange
Gray
Black
Black
Black
Black
Orange
Approvals
Cable Part Number
PVC
TPE
PVC/Nylon
PVC/Nylon
PVC
UL/CSA CMG
UL/CSA
UL/CSA TC-ER
UL/CSA TC-ER
UL/CSA CMG, PLTC*
TPE
PVC
UL/CSA TC-ER
602206TP
812308
2216040, 2214040, 2210040
7416048, 7414048, 7410044
812876*, 812872
812866, 812867, 812868,
812869, 812870, 812871
PVC
PVC
PVC
PVC
PVC
TPE
TPE
PVC/Nylon
PVC/Nylon
PVC
PVC
PVC
UL/CSA
UL/CSA TC-ER
UL/CSA TC-ER
UL/CSA CMG
UL/CSA
UL/CSA TC-ER
812308
2216040
7416048
812701
891604CY
812866
* Lapp cable 812876 is PLTC.
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
43
MOTOR &
DRIVE
AB Assemblies for Rockwell Automation Motors
Feedback & Power Cable Assemblies for Flexing Applications
MP Series Motors
Motion Type
Lapp Part Number
Power
Flexing
93577xxx-16
Flexing
93547xxx-16
Flexing
93577xxx-14
Flexing
93547xxx-14
Flexing
93577xxx-10
Flexing
93547xxx-10
Flexing
93577xxx-8
Flexing
93547xxx-8
Stationary
83577xxx-16
Stationary
83547xxx-16
Stationary
83577xxx-14
Stationary
83547xxx-14
Stationary
83577xxx-10
Stationary
83547xxx-10
Stationary
83577xxx-8
Stationary
83547xxx-8
Power with Brake
Flexing
93579xxx-16
Flexing
93549xxx-16
Flexing
93579xxx-16E
Flexing
93579xxx-14
Flexing
93549xxx-14
Flexing
93579xxx-14-E
Flexing
93579xxx-10
Flexing
93549xxx-10
Replace “xxx” with desired cable length in feet.
Rockwell Part Number
2090-CPWM7DF-16AFxx
2090-CPWM4DF-16AFxx
2090-CPWM7DF-14AFxx
2090-CPWM4DF-14AFxx
2090-CPWM7DF-10AFxx
2090-CPWM4DF-10AFxx
2090-CPWM7DF-8AFxx
2090-CPWM4DF-8AFxx
2090-CPWM7DF-16AAxx
2090-CPWM4DF-16AAxx
2090-CPWM7DF-14AAxx
2090-CPWM4DF-14AAxx
2090-CPWM7DF-10AAxx
2090-CPWM4DF-10AAxx
2090-CPWM7DF-8AAxx
2090-CPWM4DF-8AAxx
2090-CPBM7DF-16AFxx
2090-CPBM4DF-16AFxx
2090-CPBM7E7-16AFxx
2090-CPBM7DF-14AFxx
2090-CPBM4DF-14AFxx
2090-CPBM7E7-14AFxx
2090-CPBM7DF-10AFxx
2090-CPBM4DF-10AFxx
Motion Type
Lapp Part Number
Rockwell Part Number
Flexing
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Stationary
Stationary
Stationary
Stationary
Stationary
Feedback
Flexing
Flexing
Flexing
Flexing
Flexing
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Stationary
93579xxx-10-E
93579xxx-8
93549xxx-8
93579xxx-8-E
83579xxx-16
83549xxx-16
83579xxx-14
83549xxx-14
83579xxx-10
83549xxx-10
83579xxx-8
83549xxx-8
2090-CPBM7E7-10AFxx
2090-CPBM7DF-8AFxx
2090-CPBM4DF-8AFxx
2090-CPBM7EF-8AFxx
2090-CPBM7DF-16AAxx
2090-CPBM4DF-16AAxx
2090-CPBM7DF-14AAxx
2090-CPBM4DF-14AAxx
2090-CPBM7DF-10AAxx
2090-CPBM4DF-10AAxx
2090-CPBM7DF-8AAxx
2090-CPBM4DF-8AAxx
93572xxx
93574xxx
93542xxx
93572xxx-E
93576xxx
93578xxx
93546xxx
93576xxx-E
83572xxx
83574xxx
83576xxx
83546xxx
2090-CFBM7DF-CEAFxx
2090-CFBM7DD-CEAFxx
2090-CFBM4DF-CEAFxx
2090-CFBM7E7-CEAFxx
2090-CFBM7DF-CDAFxx
2090-CFBM7DD-CDAFxx
2090-CFBM4DF-CDAFxx
2090-CFBM7E7-CDAFxx
2090-CFBM7DF-CEAAxx
2090-CFBM7DD-CEAAxx
2090-CFBM7DF-CDAAxx
2090-CFBM4DF-CDAAxx
TLY Series Motors
Motion Type
Lapp Part Number
Power
Flexing
72505xxx
Stationary
62505xxx
Power with Brake
Flexing
74505xxx
Stationary
64505xxx
Replace “xxx” with desired cable length in feet.
44
Rockwell Part Number
2090-CPWM6DF-16AFxx
2090-CPWM6DF-16AAxx
2090-CPBM6DF-16AAxx
2090-CPBM6DF-16AAxx
Motion Type
Feedback
Flexing
Flexing
Stationary
Stationary
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
Lapp Part Number
Rockwell Part Number
72515xxx
72514xxx
62515xxx
62514xxx
2090-CFBM6DD-CCAFxx
2090-CFBM6DF-CBAFxx
2090-CFBM6DD-CCAAxx
2090-CFBM6DF-CBAAxx
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
MOTOR &
DRIVE
AB Legacy Assemblies for Rockwell Automation Motors
Legacy Feedback & Power Cable Assemblies
Cable Construction
Jacket: Feedback: gray or black PVC
Power with brake: gray or black PVC (ÖLFLEX® 190 CY &
ÖLFLEX® FD 890 CY); orange polyurethane or PVC (ÖLFLEX®
SERVO cable)
All raw cable is Lapp product; datasheets are available on our website or via sales. Assembly drawings are available on our website.
All overmolded products are molded with UL 94 V-0 PVC.
Cable Technical Data
Cable Type:
- Feedback P/N:812090, 812308, 812701,
892206TP, 602208TP
- Power/
power with brake:ÖLFLEX® 190 CY
ÖLFLEX® FD 890 CY
ÖLFLEX® servo cables
Nominal Voltage:
- Feedback:
300V
- Power/
power with brake: 600V
Minimum Bend Radius:
Feedback:
- for stationary use:
- Cable 812090, 812308: 10 x cable diameter
- Cable 602208TP:
8 x cable diameter
- for continuous flex:
- Cable 812701:
12 x cable diameter
- Cable 892206TP:
10 x cable diameter
Power/
power with brake: see specific cable
catalog page
Connector Technical Data
Connector Type:
- MP series motors: ITT Cannon TNM; bayonet
- MPF series motors: M23 series; threaded
- N series motors:
M26482 series; bayonet
- H & F series motors: M5015 series; threaded
- Y series motors:
Tyco CPC black plastic;
threaded
- TL series motors:
Tyco MATE-N-LOK, tablocking
MP Series Motors
Motion Type
Power: 230V
Flexing
Flexing
Flexing
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Stationary
Stationary
Stationary
Power: 460V
Flexing
Flexing
Flexing
Flexing
Flexing
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Stationary
Lapp Part Number
Rockwell Part Number
73529xxx-10
73529xxx-14
73529xxx-16
73529xxx-10
73529xxx-14
73529xxx-16
63529xxx-10
63529xxx-14
63529xxx-16
63529xxx-10
63529xxx-14
63529xxx-16
2090-UXNPAMP-10Sxx
2090-UXNPAMP-14Sxx
2090-UXNPAMP-16Sxx
2090-XXNPMP-10Sxx
2090-XXNPMP-14Sxx
2090-XXNPMP-16Sxx
2090-UXNPAMP-10Sxx
2090-UXNPAMP-14Sxx
2090-UXNPAMP-16Sxx
2090-XXNPMP-10Sxx
2090-XXNPMP-14Sxx
2090-XXNPMP-16Sxx
73529xxx-8
73529xxx-10
73529xxx-14
73529xxx-16
73529xxx-8
73529xxx-10
73529xxx-14
73529xxx-16
63529xxx-8
63529xxx-10
63529xxx-14
63529xxx-16
2090-UXNPBMP-8Sxx
2090-UXNPBMP-10Sxx
2090-UXNPBMP-14Sxx
2090-UXNPBMP-16Sxx
2090-XXNPMP-8Sxx
2090-XXNPMP-10Sxx
2090-XXNPMP-14Sxx
2090-XXNPMP-16Sxx
2090-UXNPBMP-8Sxx
2090-UXNPBMP-10Sxx
2090-UXNPBMP-14Sxx
2090-UXNPBMP-16Sxx
Replace “xxx” with desired cable length in feet.
For a 90° connector on the motor end, add “-R” to end of Lapp P/N.
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
Motion Type
Lapp Part Number
Stationary
63529xxx-8
Stationary
63529xxx-10
Stationary
63529xxx-14
Stationary
63529xxx-16
Power: 460V 1394C-SJTXX-D (D29)
Flexing
73529xxx-8
Flexing
73529xxx-10
Flexing
73529xxx-14
Flexing
73529xxx-16
Stationary
63529xxx-8
Stationary
63529xxx-10
Stationary
63529xxx-14
Stationary
63529xxx-16
Feedback: 230/460V
Flexing
73528xxx
Flexing
73526xxx
Flexing
75926xxx
Stationary
63528xxx
Stationary
63526xxx
Stationary
65926xxx
1394 (D29)
Flexing
71100125-xxx
Stationary
61100125-xxx
ULTRA 3000/5000 with 1394 Brake
Flexing
73524xxx
Stationary
63524xxx
Rockwell Part Number
2090-XXNPMP-8Sxx
2090-XXNPMP-10Sxx
2090-XXNPMP-14Sxx
2090-XXNPMP-16Sxx
2090-CDNPBMP-8Sxx
2090-CDNPBMP-10Sxx
2090-CDNPBMP-14Sxx
2090-CDNPBMP-16Sxx
2090-CDNPBMP-8Sxx
2090-CDNPBMP-10Sxx
2090-CDNPBMP-14Sxx
2090-CDNPBMP-16Sxx
2090-UXNFBMP-Sxx
2090-UXNFDMP-Sxx
2090-XXNFMP-Sxx
2090-UXNFBMP-Sxx
2090-UXNFDMP-Sxx
2090-XXNFMP-Sxx
2090-CDNFDMP-Sxx
2090-CDNFDMP-Sxx
2090-UXNBMP-18Sxx
2090-UXNBMP-18Sxx
For an extension assembly (male-female), add “-E” to end of Lapp P/N.
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
45
MOTOR &
DRIVE
AB Legacy Assemblies for Rockwell Automation Motors
Legacy Feedback & Power Cable Assemblies
H/F Series Motors
Motion Type
Power
Flexing
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Stationary
Feedback
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Brake
Flexing
Stationary
H Series Motors
Lapp Part Number
Rockwell Part Number
73502xxx
73502xxx
73503xxx
73506xxx
63502xxx
63502xxx
63503xxx
63506xxx
2090-UXNPAHF-14SXX
2090-XXNPHF-14SXX
2090-UXNPAHF-10SXX
2090-UXNPAHF-8SXX
2090-UXNPAHF-14SXX
2090-XXNPHF-14SXX
2090-UXNPAHF-10SXX
2090-UXNPAHF-8SXX
73513xxx
73525xxx
75925xxx
63513xxx
63525xxx
65925xxx
2090-UXNFBHF-SXX
2090-UXNFDHF-SXX
2090-XXNFHF-SXX
2090-UXNFBHF-SXX
2090-UXNFDHF-SXX
2090-XXNFHF-SXX
73544xxx
63544xxx
—
—
Motion Type
Power
Flexing
Flexing
Stationary
Stationary
Feedback
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Brake
Flexing
Stationary
Rockwell Part Number
73501xxx
63501xxx
2090-XXNPH-16Sxx
2090-XXNPH-16Sxx
Lapp Part Number
Rockwell Part Number
(Stationary)
73507xxx
73507xxx
63507xxx
63507xxx
2090-UXNPAN-16Sxx
2090-XXNPN-16Sxx
2090-UXNPAN-16Sxx
2090-XXNPN-16Sxx
73516xxx
73527xxx
75927xxx
63516xxx
63527xxx
65927xxx
2090-UXNFBN-Sxx
2090-UXNFDN-Sxx
2090-XXNFN-Sxx
2090-UXNFBN-Sxx
2090-UXNFDN-Sxx
2090-XXNFN-Sxx
73534xxx
63534xxx
—
—
Lapp Part Number
Rockwell Part Number
400270-xxx-10
400270-xxx-10NB
400270-xxx-14
400270-xxx-14NB
400270-xxx-16
400270-xxx-16NB
300270-xxx-10
300270-xxx-10NB
300270-xxx-14
300270-xxx-14NB
300270-xxx-16
300270-xxx-16NB
2090-XXNPMF-10Sxx
Without brake
2090-XXNPMF-14Sxx
Without brake
2090-XXNPMF-16Sxx
Without brake
2090-XXNPMF-10Sxx
Without brake
2090-XXNPMF-14Sxx
Without brake
2090-XXNPMF-16Sxx
Without brake
400271-xxx-15P
400271-xxx
300271-xxx-15P
300271-xxx
With drive connector
2090-XXNFMF-SXX
With drive connector
2090-XXNFMF-SXX
Power
Flexing
Stationary
N Series Motors
Motion Type
Power with Brake
Flexing
Flexing
Stationary
Stationary
Feedback
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Brake
Flexing
Stationary
TL Series Motors
Motion Type
Lapp Part Number
MPF Series Motors
Lapp Part Number
Rockwell Part Number
71529xxx-16
71529xxx-16
61529xxx-16
61529xxx-16
2090-XXNPT-16Sxx
2090-DANPT-16Sxx
2090-XXNPT-16Sxx
2090-DANPT-16Sxx
71526xxx
71528xxx
72528xxx
61526xxx
61528xxx
62528xxx
Flying lead configuration
2090-XXNFT-Sxx
2090-DANFCT-Sxx
Flying lead configuration
2090-XXNFT-Sxx
2090-DANFCT-Sxx
500058xxx
300058xxx
2090-DANBT-18Sxx
2090-DANBT-18Sxx
Motion Type
Power
Flexing
Flexing
Flexing
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Stationary
Stationary
Stationary
Feedback
Flexing
Flexing
Stationary
Stationary
For a 90° connector on the motor end, add “-R” to end of Lapp P/N.
For an extension assembly (male-female), add “-E” to end of Lapp P/N.
Y Series Motors
Motion Type
Lapp Part Number
Power with Brake
Flexing
Flexing
Stationary
Stationary
Rockwell Part Number
73505xxx
73505xxx
63505xxx
63505xxx
2090-UXNPAY-16Sxx
2090-XXNPY-16Sxx
2090-UXNPAY-16Sxx
2090-XXNPY-16Sxx
Motion Type
Feedback
Flexing
Flexing
Flexing
Stationary
Stationary
Stationary
Lapp Part Number
Rockwell Part Number
73515xxx
73514xxx
75914xxx
63515xxx
63514xxx
65914xxx
2090-UXNFBN-Sxx
2090-UXNFD4-Sxx
2090-XXNF4-Sxx
2090-UXNFBY-Sxx
2090-UXNFDY-Sxx
2090-XXNFY-Sxx
Ultra 100/200 Series Motors
Motion Type
Lapp
Part Number
Rockwell
Part Number
F Series: Power with Brake & Feedback
Flexing
71103xxx
9101-1383
Flexing
71121xxx
9101-1365
Stationary
61103xxx
9101-1383
Stationary
61121xxx
9101-1365
F/H Series: Power with Brake & Feedback
Flexing
71101xxx
9101-1381
Flexing
71102xxx
9101-1382
Flexing
71106xxx
9101-1399
Flexing
71113xxx
9101-1366
Motion Type
Lapp
Part Number
Rockwell
Part Number
Flexing
71118xxx
9101-2027
Stationary
61101xxx
9101-1381
Stationary
61102xxx
9101-1382
Stationary
61106xxx
9101-1399
Stationary
61113xxx
9101-1366
Stationary
61118xxx
9101-2027
N Series: Power with Brake & Feedback
Flexing
71107xxx
9101-1467
Flexing
71116xxx
9101-1468
Flexing
71117xxx
9101-1474
Motion Type
Lapp
Part Number
Rockwell
Part Number
Stationary
61107xxx
9101-1467
Stationary
61116xxx
9101-1468
Stationary
61117xxx
9101-1474
Y Series: Power with Brake & Feedback
Flexing
71105xxx
9101-1385
Flexing
71114xxx
9101-1373
Flexing
71115xxx
9101-1375
Stationary
61105xxx
9101-1385
Stationary
61114xxx
9101-1373
Stationary
61115xxx
9101-1375
Replace “xxx” with desired cable length in feet.
46
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
MOTOR &
DRIVE
Servo Assemblies acc. to SIEMENS® Standards
SIEMENS® Standards 6FX 8002 & 6FX 5002
Technical Data: 6FX 8002
Minimum Bend Radius:
Power cable:
- for continuous flex:
- 16 - 6 AWG:
- 4 - 1 AWG:
- for stationary use:
Signal cable:
- for continuous flex:
- for stationary use:
7.5 x cable diameter
10 x cable diameter
4 x cable diameter
8 x cable diameter
4 x cable diameter
Nominal Voltage:
Power cable, power conductors:
- UL/CSA:
1000V
- IEC:
600/1000V
Power cables, control conductors:
- UL/CSA:
1000V
- IEC:
250V AC
Signal cable:
- UL/CSA:
30V AC/DC
- IEC:
30V AC
Nominal Voltage:
Power cable, power conductors:
- UL/CSA:
1000V
- IEC:
600/1000V
Power cables, control conductors:
- UL/CSA:
750V
- IEC:
30V AC
Signal cable:
- UL/CSA:
30V AC/DC
- IEC:
30V AC
Technical Data: 6FX 5002
Minimum Bend Radius:
- for flexible use:
- for stationary use:
12 x cable diameter
5 x cable diameter
SIEMENS® Standard 6FX 8002
Lapp
Part Number
SIEMENS® Part Number
Assemblies for Feedback
335100xxx
6FX8002-1AD00-XXXX
335104xxx
6FX8002-1AD04-XXXX
335500xxx
6FX8002-2AD00-XXXX
335304xxx
6FX8002-2AD04-XXXX
335200xxx
6FX8002-2AH00-XXXX
335211xxx
6FX8002-2CA11-XXXX
335231xxx
6FX8002-2CA31-XXXX
335234xxx
6FX8002-2CA34-XXXX
335331xxx
6FX8002-2CB31-XXXX
335201xxx
6FX8002-2CF01-XXXX
335202xxx
6FX8002-2CF02-XXXX
335204xxx
6FX8002-2CF04-XXXX
335300xxx
6FX8002-2CG00-XXXX
335400xxx
6FX8002-2CH00-XXXX
335600xxx
6FX8002-2DC00-XXXX
335310xxx
6FX8002-2DC10-XXXX
335220xxx
6FX8002-2DC20-XXXX
335210xxx
6FX8002-2EQ10-XXXX
335214xxx
6FX8002-2EQ14-XXXX
335421xxx
6FX8002-4AA21-XXXX
Assemblies for Power
335501xxx
6FX8002-5CA01-XXXX
335505xxx
6FX8002-5CA05-XXXX
335531xxx
6FX8002-5CA31-XXXX
335541xxx
6FX8002-5CA41-XXXX
335551xxx
6FX8002-5CA51-XXXX
335601xxx
6FX8002-5CS01-XXXX
335511xxx
6FX8002-5CS11-XXXX
Assemblies for Power with Brake
335601xxx
6FX8002-5DA01-XXXX
335605xxx
6FX8002-5DA05-XXXX
335631xxx
6FX8002-5DA31-XXXX
335641xxx
6FX8002-5DA41-XXXX
335651xxx
6FX8002-5DA51-XXXX
335701xxx
6FX8002-5DS01-XXXX
335611xxx
6FX8002-5DS11-XXXX
Temperature Range:
- for continuous flex:
- for stationary use:
Approvals:
UL:
Canada:
Additional:
AWM 21223
AWM 20236
AWM I/II A/B FT1
Based on VDE specifications
CE & RoHS
Temperature Range:
- for flexible use:
- for stationary use:
Approvals:
UL:
Additional:
-20°C to +60°C
-50°C to +80°C
0°C to +60°C
-20°C to +60°C
AWM 2570 (power)
AWM 2502 (signal)
Based on VDE specifications
CE & RoHS
SIEMENS® Standard 6FX 5002
Lapp Cable
00277131
00277131
00277131
00277131
00277131
00277111
00277141
00277141
00277171
00277131
00277131
00277131
00277111
00277131
see note
see note
see note
00277141
00277141
00277151
0027784
0027784
0027785
0027786
0027787
0027784
0027785
0027790
0027790
0027791
0027791
0027793
0027790
0027791
* Replace “xxx” with the desired cable length in meters.
Note: Made with a special Lapp cable design. Specs are available upon request.
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
Lapp
Part Number
SIEMENS® Part Number
Assemblies for Feedback
235100xxx
6FX5002-1AD00-XXXX
235104xxx
6FX5002-1AD04-XXXX
235500xxx
6FX5002-2AD00-XXXX
235304xxx
6FX5002-2AD04-XXXX
235200xxx
6FX5002-2AH00-XXXX
235211xxx
6FX5002-2CA11-XXXX
235231xxx
6FX5002-2CA31-XXXX
235234xxx
6FX5002-2CA34-XXXX
235331xxx
6FX5002-2CB31-XXXX
235201xxx
6FX5002-2CF01-XXXX
235202xxx
6FX5002-2CF02-XXXX
235204xxx
6FX5002-2CF04-XXXX
235300xxx
6FX5002-2CG00-XXXX
235400xxx
6FX5002-2CH00-XXXX
235600xxx
6FX5002-2DC00-XXXX
235310xxx
6FX5002-2DC10-XXXX
235220xxx
6FX5002-2DC20-XXXX
235210xxx
6FX5002-2EQ10-XXXX
235214xxx
6FX5002-2EQ14-XXXX
Assemblies for Power
235501xxx
6FX5002-5CA01-XXXX
235505xxx
6FX5002-5CA05-XXXX
235531xxx
6FX5002-5CA31-XXXX
235541xxx
6FX5002-5CA41-XXXX
235551xxx
6FX5002-5CA51-XXXX
235601xxx
6FX5002-5CS01-XXXX
235511xxx
6FX5002-5CS11-XXXX
Assemblies for Power with Brake
235601xxx
6FX5002-5DA01-XXXX
235605xxx
6FX5002-5DA05-XXXX
235631xxx
6FX5002-5DA31-XXXX
235641xxx
6FX5002-5DA41-XXXX
235651xxx
6FX5002-5DA51-XXXX
235701xxx
6FX5002-5DS01-XXXX
235611xxx
6FX5002-5DS11-XXXX
Lapp Cable
0025725
0025725
0025725
0025725
0025725
0025724
0025726
0025726
0025725
0025725
0025725
0025725
0025724
0025725
see note
see note
see note
0025726
0025726
00257001
00257001
00257011
00257021
00257031
00257001
00257011
00257151
00257151
00257161
00257171
00257181
00257151
00257161
Custom configurations are available upon request.
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
47
MOTOR &
DRIVE
Servo LK-INX Assemblies according to INDRAMAT® Standards
INDRAMAT® Standard IKG/RKL
Technical Data
Minimum Bend Radius:
- for stationary use:
- for continuous flex:
6 x cable diameter
10 x cable diameter
Nominal Voltage:
- Power conductors:
- UL/CSA:
- IEC:
- Control conductors:
- UL/CSA:
- IEC:
1000V
600/1000V
1000V
250V AC
Temperature Range:
- for stationary use:
- for continuous flex:
Approvals:
UL:
-50°C to +80°C
-30°C to +60°C
AWM 20234
INDRAMAT® Standard RKL
INDRAMAT® Standard IKG
Lapp
Part Number
Length
(m)
INDRAMAT
Part Number
Lapp Cable
70345476
70345503
70345521
70345522
70345541
70345542
70345543
70345545
10
10
10
10
10
10
10
10
IKG4009-010
IKG4087-010
IKG4163-010
IKG4170-010
IKG4020-010
IKG4018-010
IKG4016-010
IKG4050-010
7072403
7072406
7072408
7072408
7072403
7072403
7072403
7072404
Lapp
Part Number
Length
(m)
INDRAMAT
Part Number
Lapp Cable
70410000
70392839
70410001
10
10
10
RKL4330-010
RKL4302-010
RKL4303-010
7072409
7072403
7072403
Listed part numbers are for 10m lengths.
Other lengths are available.
INDRAMAT® Standard IKS/RKG
Technical Data
Minimum Bend Radius:
- for stationary use:
- for continuous flex:
5 x cable diameter
10 x cable diameter
Temperature Range:
- for stationary use:
- for continuous flex:
Nominal Voltage:300V
-30°C to +90°C
-30°C to +80°C
INDRAMAT® Standard IKS
AWM 20234
INDRAMAT® Standard RKG
Lapp
Part Number
Length
(m)
INDRAMAT
Part Number
Lapp Cable
70335583
70335584
70335595
70665596
10
10
10
10
IKS4374-010
IKS4376-010
IKS4103-010
IKS4153-010
7072401
7072401
7072401
7072401
48
Approvals:
UL:
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
Lapp
Part Number
Length
(m)
INDRAMAT
Part Number
Lapp Cable
70392984
70410002
10
10
RKG4200-010
RKG4201-010
7072401
7072401
Listed part numbers are for 10m lengths.
Other lengths are available.
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
MOTOR &
DRIVE
Servo Assemblies according to LENZE® Standard
Technical Data
Minimum Bend Radius:
- for stationary use:
- for continuous flex:
7.5 x cable diameter
10 x cable diameter
Temperature Range:
- for stationary use:
- for continuous flex:
-25°C to +80°C
-5°C to +70°C
Nominal Voltage:
- Resolver & encoder cable:
- UL/CSA:
300V
- VDE:
30V
- Motor cable, power conductors:
- UL/CSA:
600V
- VDE:
600/1000V
Test Voltage:
- Resolver & encoder cable: 1500V
- Motor cable:
- Power conductors: 4000V
- Control conductors: 2000V
Approvals:
UL:
AWM 21165
(resolver/encoder cable,
flexing)
AWM 2464
(resolver/encoder cable,
stationary)
AWM 20940
(motor cable, flexing)
AWM 2570
(motor cable, stationary)
Lapp
Part Number
Cable Type
Application
Type
Length
(m)
Size / Number of
Conductors
LENZE Assembly
Part Number
74321272
74321426
74320320
74320499
70415002
74322629
70415001
74322480
74323073
70415005
74320540
74323672
74323522
Servo Cable
Servo Cable
Servo Cable
Servo Cable
Servo Cable
Fan Cable
Fan Cable
Fan Cable
Resolver Cable
Resolver Cable
Resolver Cable
Encoder Cable
Encoder Cable
Flexing
Flexing
Stationary
Stationary
Stationary
Flexing
Flexing
Stationary
Flexing
Flexing
Stationary
Flexing
Stationary
10
10
10
10
10
10
10
10
10
10
10
10
10
16 AWG/4c + (20 AWG/1pr)
14 AWG/4c + (20 AWG/1pr)
16 AWG/4c + (20 AWG/1pr)
14 AWG/4c + (20 AWG/1pr)
16 AWG/4c
20 AWG/5c
19 AWG/5c
20 AWG/5c
3x(26 AWG/1pr) + (20 AWG/1pr)
26 AWG/3c + 26 AWG/3pr
3x(26 AWG/1pr) + (20 AWG/1pr)
4x(26 AWG/1pr) + (18 AWG/1pr)
4x(26 AWG/1pr) + (18 AWG/1pr)
EWLM-010GMS-015
EWLM-010GMS-025
EWLM-010GM-015
EWLM-010GM-025
EYP-0003-A-0100-M01-A00
EWLL-010GMS
EYL-0001-V-0100L02-J02
EWLL-010GM
EWLR-010GMS-T
EYF-0020-A-0100-F01-S04
EWLR-010GM-T
EWLE-010GMS-T
EWLE-010GM-T
( ) = shielded pairs
MOTOR &
DRIVE
Servo Assemblies according to SEW® Standard
Technical Data
Minimum Bend Radius:
- Power cable:
- Signal cable:
Temperature Range:
- Power cable:
- Signal cable:
15 x cable diameter
15 x cable diameter
-10°C to +80°C
-5°C to +70°C
Nominal Voltage:
- Power cable, power conductors:
- UL:
600V
- IEC:
750V
- Power cable, signal conductors:
- UL:
600V
- IEC:
350V
- Signal cable:
250V
Test Voltage:
- Power cable:
- Signal cable:
Approvals:
UL:
Lapp
Part Number
Cable Type
Application
Type
Length
(m)
Size / Number of
Conductors
SEW Assembly
Part Number
70430251
70430250
70430252
70430249
Power Cable
Power Cable
Signal Cable
Signal Cable
Stationary
Stationary
Flexing
Stationary
10
10
10
10
16 AWG/4c
16 AWG/4c + 18 AWG/3c
24 AWG/6pr
24 AWG/6pr
05904544
13324853
1995405
13324535
Recommended SKINTOP® assumes minimal OD variance. Additional configurations are available. Photographs
are not to scale and are not true representations of the products in question. For current information go to our
website. If not otherwise specified, all values relating to the product are nominal values.
800-774-3539 • www.lappusa.com
www.lappcanada.com • www.lappmexico.com
2000V
1500V
AWM 2587
49

Download Report