CRG20 Angular Rate Sensor Evaluation Boards CRG20 is a single axis MEMS angular rate sensor. The attractive cost/performance ratio makes these gyros attractive to a variety of different applications where space and cost are a premium. CRG20 gyros are supplied in a PCBA surface mountable 36-pad LCC package and are intended to be integrated into a user’s own electronics. To aid with product assessment and integration Silicon Sensing have a development board available for the designers to easily connect and access the data. The CRG20 evaluation boards are available for the standard -01, -02, -12 and -22 variants of the gyro. Part Number: CRG20-xx-0300 xx is the variants required CRG20 part mounted: CRG20-01 or CRG20-02 or CRG20-12 or CRG20-22 Size: 21mm x 40.4mm (including pins) Power Supply: +5V and 0V Analogue Outputs: Yes Digital Output: Yes via SPI® interface Optional: USB interface kit The boards are not intended to be used as an integral part of a system. They are available purely for evaluation and assessment purposes. © Silicon Sensing is an Atlantic Inertial Systems, Sumitomo Precision Products joint venture company CRG20 Angular Rate Sensor Evaluation Boards CRG20 Evaluation Board Schematic VDD_A VDD_D C10 100n 10% 16V C6 100n 10% 16V VDD_A AGND AGND VDD VDD PL1 1 3 ST1 VDD_A VDD_D 32 33 2 35 1 2 PL1 7 3 ST2 1 C8 10u 10% 16V 23 28 25 27 VSSA AGND2 AGND 6 19 24 8 RATE1 RATE2 1 34 FRB_INT 21 FSYNC 20 CBITA 15 BIT_OK 14 AGND PL1 ANALOGUE OUT PL1 AGND AGND + C3 10u 10% 16V AGND + C1 22u 10% 16V AGND C4 1n 10% 50V VDD 1 AGND 2 R1 0R 3 4 5 6 7 R3 10k 1% PL2 VDD PL2 VREF_1 PL2 AUX_1 PL2 RATE_1 PL2 CBITA PL2 BIT_OK PL2 GND GND 18 C5 22n 10% 50V AGND2 RESETB_IN AGND AUX1 AUX2 SPI_PROC_ACQ_SELB SPI_PROC_ACQ_CLK SPI_PROC_ACQ SPI_ACQ_PROC C9 100n 10% 16V 29 30 26 5 3 VZAP EXTSYNC TEST_IN_1 TEST_PIN_2 AGND AGND 2 GND VDDA3V VDD3V VCC_D RESETB_IN RESETB_OUT RESETB_PROC AGND AGND 9 7 C2 100n 10% 16V TP2 TP1 + GND VREF1 VREF2 6 47R R2 C11 1% 100n 10% 16V IC1 CRG20-1 16 VHT PL1 5 17 GND_MEMS SPI_SELB PL1 SPI_IN SPI_OUT CLK_IN SPI_SELB 22 GND_D SPI_CLK 12 11 10 13 3 VDD5V_1 PL1 36 VDD_MEMS SPI_OUT AGND2 4 31 VSS PL1 4 VDD5V_0 SPI_IN C7 100n 10% 16V AGND AGND 2 8 2.5 29.0 4 x Ø3.00 PL2 PIN 1 SAMTEC PT. NO MMT-107-01-S-SH 2.0 TYP PIN No. PL1 PIN-OUT PL2 PIN-OUT 1 VDD VDD 2 RESETB_IN VREF_1 3 SPI_OUT AUX_1 4 SPI_IN RATE_1 2.0 TYP 21.0 26.0 2.5 5 SPI_CLK CBITA 6 SPI_SELB BIT_OK 7 GND GND 8 RATE2 N/A 3.2 REF 34.0 3.2 REF PL1 PIN 1 SAMTEC PT. NO MMT-108-01-S-SH 5.4 MAX 1.6 MAX Available to purchase online at www.siliconsensing.com Ordering Part Number Description Silicon Sensing Systems Limited Clittaford Road, Southway, Plymouth, Devon PL6 6DE United Kingdom T +44 (0)1752 723330 F +44 (0)1752 723331 E [email protected] W siliconsensing.com Silicon Sensing Systems Japan Limited 1-10 Fuso-Cho, Amagasaki, Hyogo 6600891, Japan T +81 (0)6 6489 5868 F +81 (0)6 6489 5919 E [email protected] W siliconsensing.com CRS20-01-0300 CRS20-01 mounted on evaluation board as described above CRS20-02-0300 CRS20-02 mounted on evaluation board as described above CRS20-12-0300 CRS20-12 mounted on evaluation board as described above © Copyright 2013 Silicon Sensing Systems Limited All rights reserved. Printed in England 07/13 CRS20-22-0300 CRS20-22 mounted on evaluation board as described above CRG20-00-0300-131 Rev 1 DCR No. 710005026 Silicon Sensing Systems Limited Registered in England & Wales No. 3635234 Clittaford Road, Southway, Plymouth, Devon PL6 6DE The device mark Silicon Sensing is a registered trade mark of Silicon Sensing Systems Community Trade Mark 003587664 Specification subject to change without notice.
© Copyright 2024 ExpyDoc
