Download

T R A D E
CATALOG
2013
H O U S E
TABLE OF CONTENTS
UDOL PDC DRILLING BITS STANDARD DESIGNATION .............................................................................4
FORMATION TYPES ...................................................................................................................................5
PDC BITS ...................................................................................................................................................6
PDC CORE BITS ........................................................................................................................................16
SMALL-SCALE CORE BARREL YKC-Y-109/67 .........................................................................................26
CORE BREAKERS .....................................................................................................................................27
BICENTRIC PDC BITS ...............................................................................................................................30
SPECIAL APPLICATION BITS ...................................................................................................................32
HARD-ALLOY BITS...................................................................................................................................32
STABILIZERS............................................................................................................................................34
LINER HANGING EQUIPMENT .................................................................................................................36
WELL CEMENTING EQUIPMENT .............................................................................................................62
WELL CEMENTING HARDWARE ..............................................................................................................68
DOWN HOLE MOTOR VALVES ..................................................................................................................74
STOP BALL COCKS ..................................................................................................................................77
HYDRAULICS JET DISPERSER .................................................................................................................78
3
TABLE OF CONTENTS
TABLE OF CONTENTS
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
UDOL PDC DRILLING BITS
STANDARD DESIGNATION
FORMATION TYPES
BIT DESIGNATION
Y 6 - 215,9 ST - 6 М
Y – UDOL
trademark
M – formation
type
6 – Blade count*
6 - PDC cutter size
215.9 – bit (core bit, equipment) size in mm
ST – bit type
* Does not apply to bicentric PDC bits
BIT SIZE
For bicentric bits designation (SR) the first number is bit drift size, the second is drill
out size and the third is “pilot” size. For example:
Y-120.6x142.8 x 95 SR-4MC
For core bits designation (SC) the first number is bit size and the second is core size.
For example: Y9-214./100 SC-2T
CORE BIT TYPE FORMATION TYPE
Grey and dark grey clays, dense, thinly bedded, bedded and nonbedded, comminuted, limey and
nonlimey, often psammitic and micaceous, sometimes with pyrites and siderites nodules, with
assises and interbeds of sands, siltstones and very fine sandstones, dense and unconsolidated,
M
polymistic, clayed, micaceous, interbeded with dolomitic marls, limestones, sometimes micaceous
argillites, sometimes limey and dolomites. Clays interbeded with fine-grained and very fine-grained
sand, volcanic ash, shelly limestones and sandstones.
Clays, in places claystone-like, psammitic, micaceous, opoka-like, pyritized, bedded argillites,
micaceous, sometimes coal, interbedded with consertal sandstones, quartz, clayed, conglomerates,
MC
consolidated by calcareous clayed material, siltstones unevenly clayed, limey and limestones.
Interbedded, flysch alternation of clays, sandstones, sands, siltstones, rarer – argillites, separate
conglomerate levels and marl interbeds. Clays, dark grey to black and light green, usually dense,
thinly bedded, sometimes coarsely-stratified and crumbling, fucoid, opoka-like, argellic-like,
psammitic, silty, limey and nonlimey, micaceous, sometimes plastered, bituminous, with pyrites
patches. Sandstones of different density, sometimes soft, from fine-grained to coarse grained,
quartz-glauconitic, quartz, polymict, often limey and clayed, sometimes with pyrites and bitumen
C
patches. Siltstones, dense and soft, micaceous, limey. Sands, slightly consolidated, fine grained,
silty. Argillites, bedded, foliated, limey and nonlimey. Psammitic marls, sometimes clayed. Different
pebbled and sometimes boulder conglomerates. Limestones and dolomites, pelitomorphic, finecrystalline, stilolitic, sometimes brecciform, crumbling, cavern, clayed, sometimes slightly dolomitic
with interbeds of clay and argillites, shelly limestones, writing and loose chalk. Large-grained rock
salt with interbeds of clay, anhydrides, dolomites and limestones.
СТ
BIT TYPE
ST
Bladed PDC bits for
continuous drilling
SR
SC
Bicentric PDC bits
PDC core bits
T
PDC CUTTERS SIZES
2
3
4
5
6
8 mm
10 mm
13.5 mm
16 mm
19 mm
КАТЕГОРИИ ТВЕРДОСТИ ПОРОД
М
МС
С
СТ
Т
ТК
4
For bits with cutters of two different
sizes, the cutter size is designated by
two digits.
For example: Y8-295.3 ST-64C
TK
TK, TK3
Limestones and dolomites, fine-grained and differently grained, sometimes brecciform,
massive, often fine-cavern and crumbling, irregular clayed, in some places silicified, dolomites
often limey. Interbedding of silty and very often plastered clays, siltstones, medium-grained and
fine- grained sandstones, quartz, poorly consolidated, argillites, thin-slabby, limey, crystalline
anhydrites, gypsums, marls. Large-grained rock-salt with interbeds of clay, marls, anhydrites and
dolomites.
Siltstones and dolomites. Siltstones are organogenous and clastic, fine- and very fine-grained,
pelitomorphic, in some places overcrystallized, massive, crumbling, fine-cavern, often dolomitic,
in varying degrees of silicification, sometimes pyritized, with interbeds of clay and anhydride and
gypsum patches. Dolomites, fine- and very fine-grained, pelitomorphic, dense and irregular porous,
sometimes massive, in some places fine-cavern, crumbling, rarely clayed, anhydrite, plastered,
with anhydrite and silicon patches. Interbedding of clays and clayed psammitic shales, micaceous,
quartz siltstones, clayed, carbonic, fine-grained and large grained sandstones, sometimes porous,
quartz, polymistic, micaceous, carbonic, in some places conglomerates and gravelstones.
Siltstones and dolomites. Siltstones, organogenous and clastic, pelitomorphic, very fine-grained,
bedded with overcrystollized, porous and cavern, often dolomitic, silicified, anhydrite, bituminous,
sometimes bedded with marls and oil shale. Dolomites, fine- and very fine-grained, overcrystallized,
dense, unevenly porous, sometimes massive, fine-cavern, with anhydrite and silicon patches.
Argillites, shaly, conchoidal, siltstones and quartz sandstones, carbonic, fine- and very fine-grained
sandstones, sometimes bedded with mineral coal and coal shales.
Limestones, ogranogenic, organogenic and clastic, fine-grained, pelitomorphic, sometimes
silicified, sometimes clayed and bituminous, dolomitic, crumbling and cavern. Dolomites, finegrained, in some places silicified, with gypsum patches, interlayers of thin-bedded clay and marls.
Argillites, sometimes silicified, siltstones and fine-grained sandstones, quartz, clay shales, cherts,
andesites, andesite-basalts.
Soft
Soft to Medium
Medium
Medium to hard
Hard
Very Hard
5
UDOL PDC DRILLING BITS STANDARD DESIGNATION
T R A D E
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
ТРЕХПЛАСТНЫЕ ДОЛОТА
ST LINE
PDC bits of ST line are designed for continuous vertical, directional and horizontal drilling.
PDC CUTTERS
with high impact and abrasive wear resistance are used to protect the bit form impact
caused by vibrations and to increase bit life
Tungsten carbide
hardfacing for blades
protection
Spiral gauge
for improved bit
stabilization
Increased junk slot area
for improved bottom hole
cleaning from cuttings
6
Hardfacing of ports
to protect from washout
The positioning of
ports is at
an angle to the
blades for
improved cutter
cleaning and
cooling
PDC BITS
T R A D E
Основная область применения трехлопастных долот - бурение в мягких неабразивных
породах.
BIT TYPE
BIT SIZE, MM
IADC CODE
CONNECTION TYPE
FORMATION TYPE
УЗ-151 STD-4 М
151
S133
3-88 box
Soft
УЗ-126 STD-4 М
126
S132
3-76
Soft
УЗ-123,8 STD-4 M
123,8
S132
3-76
Soft
УЗ-123 ST-4 М
123
S132
3-76
Soft
УЗ-120,6 ST-4 М
120,6
S132
3-76
Soft
УЗ-98,4 STD-4 М
98,4
S132
3-66 box
Soft
У3-123,8
STD-4 М
IADC S132
BIT SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
1233,8 mm
3 x ∅ 12,7 mm
3-76
2-6
60-220
8-12
Diamond-impregnated
inserts and
tungsten carbide
hardfacing for
bit gauge protection
7
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
Bits with PDC cutters of a smaller size, as well as with a second row of cutters are applied in
harder and more abrasive formations.
FOUR-BLADED BITS
Four-bladed bits are designed for drilling in soft and soft to medium nonabrasive formations.
BIT TYPE
BIT SIZE, MM
IADC CODE
CONNECTION TYPE
FORMATION TYPE
BIT TYPE
BIT SIZE, MM
IADC CODE
CONNECTION TYPE
FORMATION TYPE
УЗ-95 ST-2 CT
95
S342
3-66
Medium to hard
У4-295,3 ST-6 М
295,3
S123
3-152
Soft
УЗ-94 ST-2 CT
94
S342
3-66
Medium to hard
У4-215,9 STD-5 MC
215,9
S223
3-117
Soft to medium
УЗ-92 ST-2 CT
92
S342
3-66
Medium to hard
У4-142,9 ST-4 M
142,9
S132
3-88
Soft
У4-139,7 ST-4 М
139,7
S132
3-88
Soft
У4-130,2 ST-4 MC
130,2
S223
3-76
Soft to medium
У4-123,8 ST-4 MC
123,8
S223
3-76
Soft to medium
УЗ-93 ST-2 CT
92
S342
3-66
Medium to hard
УЗ-92
ST-2 CT
IADC S342
BIT SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
92 mm
3 х ∅ 12,7 mm
3-66
2-3
40-120
6-10
У4-295,3
ST-6 М
IADC S123
BIT SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
8
PDC BITS
T R A D E
295,3 mm
4 х ∅ 12,7 mm
4 х ∅ 18 mm
3-152
6-12
60-250
54-64
9
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
Bits with PDC cutters of a smaller size, as well as with a second row of cutters are applied in
harder and more abrasive formations.
FIVE-BLADED BITS
Five-bladed bits are designed for drilling in soft to medium and medium nonabrasive formations.
BIT TYPE
BIT SIZE, MM
IADC CODE
CONNECTION TYPE
FORMATION TYPE
BIT TYPE
BIT SIZE, MM
IADC CODE
CONNECTION TYPE
FORMATION TYPE
У4-123,8 ST-3 С
123.8
S332
3-76
Medium
У5-295,3 ST-6 MC
295,3
S222
3-152
Soft to medium
У4-123 ST-2 T
123
S442
3-76
Hard
У5-215,9 STD-4 C
215,9
S333
3-117
Medium
У5-190,5 ST-4 MC
190,5
S232
3-117
Soft to medium
У5-123,8 ST-4 C
123,8
S232
3-76
Medium
У4-123,8
ST-3 С
IADC S332
BIT SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
123,8 mm
4 х ∅ 12,7 mm
3-76
2-6
60-220
8-12
У5-295,3
ST-6 МС
IADC S222
BIT SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
10
295,3 mm
5 х ∅ 18 mm
3-152
5-10
60-220
42-58
11
PDC BITS
T R A D E
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
SIX-BLADED BITS
Six-bladed bits are designed for drilling in soft to medium and medium interbedded with slightly
abrasive formations.
BIT TYPE
BIT SIZE, MM
IADC CODE
CONNECTION TYPE
FORMATION TYPE
Y6-295,3 ST-6 MC
У6-269,9 ST-6 MC
У6-269,9 ST-5 С
У6-215,9 ST-6 MC
У6-215,9 STD-5 C
У6-152,4 ST-4 MC
У6-149,2 ST-4 MC
У6-142,9 ST-4 MC
У6-139,7 ST-4 MC
У6-123,8 STD-4 МС
У6-120,6 ST-4 MC
У6-119 ST-4 МС
У6-118 ST-4MC
У6-112 ST-24 С
295,3
269,9
269,9
215,9
215,9
152,4
149,2
142,9
139,7
123,8
120,6
119
118
112
S223
S222
S323
S222
S323
S332
S332
S232
S232
S232
S232
S232
S232
S232
3-152
3-152
3-152
3-117
3-117
3-88
3-88
3-88
3-88
3-76
3-76
3-76
3-76
3-76
Soft to medium
Soft to medium
Medium
Soft to medium
Medium
Soft to medium
Soft to medium
Soft to medium
Soft to medium
Soft to medium
Soft to medium
Soft to medium
Soft to medium
Medium
У6-215,9
STD-5 C
IADC S442
BIT SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
12
215,9 mm
8 х ∅ 12,7 mm
3-117
4-8
80-220
32-42
Bits with PDC cutters of a smaller size, as well as with a second row of cutters are applied in
harder and more abrasive formations..
ОБОЗНАЧЕНИЕ
ДОЛОТА
ДИАМЕТР
ДОЛОТА, ММ
КОД IADC
ПРИСОЕДИНИТЕЛЬНАЯ
РЕЗЬБА
КАТЕГОРИЯ ПОРОД
ПО БУРИМОСТИ
У6-165,1 ST-2 TK
165,1
S442
3-88
Very hard
У6-149,2 ST-2 TK
149,2
S442
3-88
Very hard
У6-142,9 ST-2 TK
142,9
S442
3-88
Very hard
У6-139,7 ST-2 TK
139,7
S442
3-88
Very hard
У6-123,8 ST-3 CT
123,8
S332
3-76
Medium to hard
У6-114,3 ST-3 CT
114,3
S332
3-76
Medium to hard
У6-105 ST-3 CT
105
S332
3-66
Medium to hard
У6-139,7
ST-2 ТК
IADC S442
BIT SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
139,7 mm
6 х ∅ 12,7mm
3-88
2-6
60-220
14-18
54-64
13
PDC BITS
T R A D E
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
EIGHT-BLADED BITS
Eight-bladed bits are designed for drilling in medium to hard and hard slightly abrasive formations.
Nine-bladed and ten-bladed bits are designed for drilling in hard interbeded with very hard
abrasive formations.
BIT TYPE
BIT SIZE, MM
IADC CODE
CONNECTION TYPE
FORMATION TYPE
BIT TYPE
BIT SIZE, MM
IADC CODE
CONNECTION TYPE
FORMATION TYPE
У8-295,3 ST-64 C
295,3
S323
3-152
Medium
У9-215,9 ST-3 TK
215,9
S432
3-117
Very hard
У8-215,9 ST-4 CT
215,9
S333
3-117
Medium to hard
У9-139,7 ST-3 T
139,7
S432
3-88
Hard
У8-190,5 ST-4 СТ
190,5
S332
3-117
Medium to hard
У10-295,3 ST-4 TK
295,3
S432
3-152
Very hard
У8-190,5 ST-3 T
190,5
S432
3-117
Hard
У8-188,9 ST-4 СТ
188,9
S332
3-117
Medium to hard
У8-188,9 ST-3 T
188,9
S432
3-117
Hard
У8-120,6 ST-3 СТ
120,6
S332
3-76
Medium to hard
У8-114,3 ST-2 T
114,3
S342
3-76
Hard
У8-114,3 ST-2 TH
114,3
S343
3-76
Hard
У8-105 ST-3 CT
105
S333
3-66
Medium to hard
У8-215,9
ST-4 CT
IADC S333
BIT SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
14
NINE-BLADED AND TEN-BLADED BITS
PDC BITS
T R A D E
У10-295,3
ST-4 ТК
IADC S432
BIT SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
295,3 mm
5 х ∅ 18 mm
5 х ∅ 10 mm
3-152
5-10
80-220
48-60
215,9 mm
8 х ∅ 12,7 mm
3-117
4-8
60-220
35-45
54-64
15
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
SC LINE
DBS SECURITY 6-3/4 “X4” (171.4X101.6) CORE BARREL
PDC core bits of ST line are designed for core collection using Russian core barrels such as YKR,
SKU, YKCS-Y, etc., as well as foreign such as “DBS Security” and “Baker Hughes”.
PDC CUTTERS
with high abrasive wear resistance are used
to guarantee core shaping at the end of core
bit operation
The distance for core set in the core breaker is reduced to the minimum in order to
prevent it from grouting and maximum core
breakoff
PDC CUTTERS
with high impact
and abrasive wear
resistance are
used to protect
the core bit form
impacts caused by
vibrations
Hardfacing of ports to protect
from washout
The positioning of
ports is at an angle to the blades
for improved cutter cleaning and
cooling
CORE BIT TYPE
CORE BIT SIZE,
MM
CORE SIZE,
MM
IADC
CODE
CONNECTION TYPE
FORMATION TYPE
У6-215,9/101,6 SСD-4 М
У8-215,9/101,6 SСD-4 С
У9-215,9/101,6 SСD-4 СТ
У12-215,9/101,6 SСD-3 Т
У9-215,9/101,6 SС-2 ТК
УТ-215,9/101,6 SС-ИСМ
У6-214,3/101,6 SСD-4 М
У8-214,3/101,6 SСD-4 С
У9-214,3/101,6 SСD-4 СТ
У12-214,3/101,6 SСD-3 Т
У9-214,3/101,6 SС-2 ТК
УТ-214,3/101,6 SС-ИСМ
У6-212,7/101,6 SСD-4 М
У8-212,7/101,6 SСD-4 С
У9-212,7/101,6 SСD-4 СТ
У12-212,7/101,6 SСD-3 Т
У9-212,7/101,6 SС-2 ТК
УТ-212,7/101,6 SС-ИСМ
215,9
215,9
215,9
215,9
215,9
215,9
214,3
214,3
214,3
214,3
214,3
214,3
212,7
212,7
212,7
212,7
212,7
212,7
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
S232
S332
S332
S432
S442
S432
S232
S332
S332
S432
S442
S432
S232
S332
S332
S432
S442
S432
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
(DBS) 160x4.233x1:16
Soft
Medium
Medium to hard
Hard
Very hard
Hard
Soft
Medium
Medium to hard
Hard
Very hard
Hard
Soft
Medium
Medium to hard
Hard
Very hard
Hard
У9-215,9/101,6
SСD-4 СТ
IADC S332
CORE BIT SIZE
CORE SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
Increased junk slot area for improved
bottom hole cleaning from cuttings and
reduced core washout
16
215,9 mm
101,6 mm
9 х ∅ 14,5 mm
160х4, 233х1:16
2–8
60 – 180
16 – 22
Diamond-impregnated inserts for bit
gauge protection
17
PDC CORE BITS
T R A D E
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
YKR – 172/100 CORE BARREL
YKR – 164/80 CORE BARREL
CORE BIT TYPE
CORE BIT SIZE,
MM
CORE SIZE,
MM
IADC
CODE
CONNECTION TYPE
FORMATION TYPE
CORE BIT TYPE
CORE BIT SIZE,
MM
CORE SIZE,
MM
IADC
CODE
CONNECTION TYPE
FORMATION TYPE
У9-220/100 SСD-4 СТ
У6-215,9/100 SСD-4 М
У8-215,9/100 SСD-4 С
У9-215,9/100 SСD-4 СТ
У9-215,9/100 SС-2 ТК
У9-215,9/100 SС-ИСМ
У6-214,3/100 SСD-4 М
У8-214,3/100 SСD-4 С
У9-214,3/100 SСD-4 СТ
У9-214,3/100 SС-2 ТК
У9-214,3/100 SС-ИСМ
У6-212,7/100 SСD-4 М
У8-212,7/100 SСD-4 С
У9-212,7/100 SСD-4 СТ
У9-212,7/100 SС-2 ТК
У9-212,7/100 SС-ИСМ
У9-190,5/100 SСD-4 CТ
У9-190,5/100 SС-2 ТК
У9-188,9/100 SСD-4 CТ
У9-188,9/100 SС-2 ТК
У9-187,3/100 SСD-4 CТ
У9-187,3/100 SС-2 ТК
215,9
215,9
215,9
215,9
215,9
215,9
214,3
214,3
214,3
214,3
214,3
212,7
212,7
212,7
212,7
212,7
190,5
190,5
188,9
188,9
187,3
187,3
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
S332
S232
S332
S332
S442
S432
S232
S332
S332
S442
S432
S232
S332
S332
S442
S432
S332
S442
S332
S442
S332
S442
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
З-161
Medium to hard
Soft
Medium
Medium to hard
Very hard
Hard
Soft
Medium
Medium to hard
Very hard
Hard
Soft
Medium
Medium to hard
Very hard
Hard
Medium to hard
Very hard
Medium to hard
Very hard
Medium to hard
Very hard
У6-215,9/80 SС-4 МC
У9-215,9/80 SС-3 Т
У9-215,9/80 SС-2 ТК
У6-214,3/80 SС-4 МC
У9-214,3/80 SС-3 Т
У9-214,3/80 SС-2 ТК
У6-212,7/80 SС-4 МC
У9-212,7/80 SС-3 Т
У9-212,7/80 SС-2 ТК
У6-190,5/80 SС-4 МC
У9-190,5/80 SС-4 С
У9-190,5/80 SС-3 Т
У9-190,5/80 SС-2 ТК
У6-188,9/80 SС-4 МC
У9-188,9/80 SС-4 С
У9-188,9/80 SС-3 Т
У9-188,9/80 SС-2 ТК
У6-187,3/80 SС-4 МC
У9-187,3/80 SС-4 С
У9-187,3/80 SС-3 Т
У9-187,3/80 SС-2 ТК
215,9
215,9
215,9
214,3
214,3
214,3
212,7
212,7
212,7
190,5
190,5
190,5
190,5
188,9
188,9
188,9
188,9
187,3
187,3
187,3
187,3
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
S232
S332
S442
S232
S332
S442
S232
S332
S442
S232
S332
S332
S442
S232
S332
S332
S442
S232
S332
S332
S442
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
МК-150х6х1:8
Soft to medium
Hard
Very hard
Soft to medium
Hard
Very hard
Soft to medium
Hard
Very hard
Soft to medium
Medium
Hard
Very hard
Soft to medium
Medium
Hard
Very hard
Soft to medium
Medium
Hard
Very hard
У9-215,9/101,6
SСD-4 СТ
IADC S332
CORE BIT SIZE
CORE SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
18
212,7 mm
100 mm
6 х ∅14,5 mm
З-161
2–6
60 – 180
12 – 18
У9-190,5/80
SС-4 C
IADC S332
CORE BIT SIZE
CORE SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
190,5 mm
80 mm
9 х ∅ 10 mm
МК-150х6х1:8
2–6
60 – 180
10 – 14
19
PDC CORE BITS
T R A D E
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
DBS SECURITY 4-3/4 “X2-5/8” (120.6X66.7) CORE BARREL
CORE BIT TYPE
CORE BIT SIZE,
MM
CORE SIZE,
MM
IADC
CODE
PIN CONNECTION
FORMATION TYPE
У6-165,1/67 SС-2 Т
165,1
67
S342
(DBS) 112х4.233х1:16
Hard
У8-165,1/67 SС-2 ТК
165,1
67
S342
(DBS) 112х4.233х1:16
Very hard
У6-157,1/67 SС-2 Т
157,1
67
S342
(DBS) 112х4.233х1:16
Hard
У8-152,4/66 SС-2 ТК
152,4
66
S442
(DBS) 112х4.233х1:16
Very hard
У8-142,9/66 SСD-2 ТК
142,9
66
S442
(DBS) 112х4.233х1:16
Very hard
У8-139,7/66 SС-2 ТК
139,7
66
S442
(DBS) 112х4.233х1:16
Very hard
У8-138,1/66 SС-2 ТК
138,1
66
S442
(DBS) 112х4.233х1:16
Very hard
У8-142,9/66
SСD-2 ТК
IADC S442
CORE BIT SIZE
CORE SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
142,9 mm
66 mm
8 х ∅ 10 mm
112х4.233х1:16
2–4
60 – 120
12 – 16
YKR – 138/67 AND SKU – 138/67 CORE BARRELS
CORE BIT TYPE
CORE BIT SIZE,
MM
CORE SIZE,
MM
IADC
CODE
CONNECTION TYPE
FORMATION TYPE
У6-165,1/67 SС-4 МC
165,1
67
S232
З-133
Soft to medium
У8-165,1/67 SС-2 ТК
165,1
67
S442
З-133
Very hard
У6-163,5/67 SС-4 МC
163,5
67
S232
З-133
Soft to medium
У8-163,5/67 SС-2 ТК
163,5
67
S442
З-133
Very hard
У6-158,7/67 SС-4 МC
158,7
67
S232
З-133
Soft to medium
У6-158,7/67 SС-2 ТК
158,7
67
S442
З-133
Very hard
У6-157,1/67 SС-4 МC
157,1
67
S232
З-133
Soft to medium
У6-157,1/67 SС-2 ТК
157,1
67
S442
З-133
Very hard
У6-152,4/67 SС-2 ТК
152,4
67
S442
З-133
Very hard
У6-149,2/67 SС-2 ТК
149,2
67
S442
З-133
Very hard
У6-157,1/67
SС-4 МС
IADC S232
CORE BIT SIZE
CORE SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
20
157,1 mm
67 mm
6 х ∅ 14 mm
З-133
2–6
60 – 90
10 – 14
21
PDC CORE BITS
T R A D E
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
YKR – 122/67 AND SKU – 122/67 CORE BARRELS
YK-127/80 CORE BARRELS
CORE BIT TYPE
CORE BIT SIZE,
MM
CORE SIZE,
MM
IADC
CODE
CONNECTION TYPE
FORMATION TYPE
CORE BIT TYPE
CORE BIT SIZE,
MM
CORE SIZE,
MM
IADC
CODE
CONNECTION TYPE
FORMATION TYPE
У8-165,1/67 SСD-2 ТК
165,1
67
S442
МК-110х6х1:8
Very hard
У8-148,5/80 SС-3 СТ
148,5
80
S332
МК-119х4х1:16
Medium to hard
У6-142,9/67 SС-4 МC
142,9
67
S232
МК-110х6х1:8
Soft to medium
У8-142,9/80 SС-3 СТ
142,9
80
S332
МК-119х4х1:16
Medium to hard
У8-142,9/67 SС-2 ТК
142,9
67
S442
МК-110х6х1:8
Very hard
У8-142,9/80 SС-2 ТК
148,5
80
S442
МК-119х4х1:16
Very Hard
У6-139,7/67 SС-4 МC
139,7
67
S232
МК-110х6х1:8
Soft to medium
У8-139,7/67 SС-2 ТК
139,7
67
S442
МК-110х6х1:8
Very hard
У8-139,7/67
SС-2 ТК
IADC S442
CORE BIT SIZE
CORE SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
22
139,7 mm
67 mm
8 х ∅ 9 mm
МК-110х6х1:8
2–8
60 – 120
12 – 16
У8-142,9/80
SС-3 CT
IADC S332
CORE BIT SIZE
CORE SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
142,9 mm
80 mm
8 х ∅ 10 mm
МК-119х4х1:16
2–6
60 – 180
12 – 16
23
PDC CORE BITS
T R A D E
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
YKR – 114/52, SKU – 114/52 AND SKU – 122/52 CORE BARRELS
CORE BIT SIZE,
MM
CORE SIZE,
MM
IADC
CODE
CONNECTION TYPE
У6-138,1/52 SС-4 МC
138,1
52
S132
МК-110х6х1:8
Soft to medium
У6-138,1/52 SС-2 Т
138,1
52
S342
МК-110х6х1:8
Hard
CORE BIT TYPE
У6-138,1/52
SС-2 Т
IADC S342
CORE BIT SIZE
CORE SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
YKS – 109/67 CORE BARREL
CORE BIT TYPE
CORE BIT SIZE,
MM
CORE SIZE,
MM
IADC
CODE
CONNECTION TYPE
FORMATION TYPE
У6-139,7/67 SС-4 МC
139,7
67
S232
ТТ-94х5.05х1:32
Soft to medium
У8-139,7/67 SС-2 ТК
139,7
67
S442
ТТ-94х5.05х1:32
Very hard
У6-138,1/67 SС-4 МC
138,1
67
S232
ТТ-94х5.05х1:32
Soft to medium
У8-138,1/67 SС-2 ТК
138,1
67
S442
ТТ-94х5.05х1:32
Very hard
У6-122/67 SС-2 CТ
122
67
S242
ТТ-94х5.05х1:32
Medium to Hard
У6-120,6/67 SС-2 CТ
120,6
67
S242
ТТ-94х5.05х1:32
Medium to Hard
У6-118/67 SС-2 CТ
118
67
S242
ТТ-94х5.05х1:32
Medium to Hard
FORMATION TYPE
138,1 mm
52 mm
6 х ∅ 14 mm
МК-110х6х1:8
2–4
60 – 90
10 – 14
У8-139,7/67
SС-2 ТК
IADC S442
CORE BIT SIZE
CORE SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
24
139,7 mm
67 mm
8 х ∅ 10 mm
ТТ-94х5.05х1:32
2–8
60 – 120
12 – 16
25
PDC CORE BITS
T R A D E
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
SMALL-SCALE CORE BARREL YKC-Y-109/67
Due to the spread of old well stock reanimation works by drilling horizontal sideholes with the
purpose of oil recovery intensification and its full extraction there is a necessity for reliable geological information about subsurface conditions. UDOL’s engineers with a direct assistance of
leading core recovery experts have designed a universal core barrel YKC-Y-109/67 for data collection on the condition of core layers in the horizontal wellbore.
Universal small-scale core barrel YKC-Y--109/67 is used for drilling with core collection in vertical, horizontal and directional wells and is assembled with downhole motors or a rotary table.
A small overall core barrel length (4 m) and its flexible joint allow to core with an angle increase
therefore it does not interfere with the drilling program. YKC-Y--109/67 is used with a core lifter
with an increased core receiver length (6 mm) for core recovery in the wellbore with a small drift
angle as well as in the vertical and horizontal sections.
UDOL’s PDC core bits sized 118/67, 120.6/67, 122/67, 138.1/67 and 139.7/67 for different formations as well as different types of core breakers (including a collet with a diamond coating) were
designed considering all features of YKC-Y--109/67 core barrel and their combined application
allows to receive a very high percentage of core recovery.
CORE BARREL SIZE IN THE MIDDLE PART
CORE BARREL SIZE IN THE CONNECTION PART
UPPER STABILIZER SIZE
BALL JOINT SIZE
CORE SIZE
105 мм
109 мм
Less than core bit size
by 2 mm
109 мм
YKC-Y-109/67 core barrel assembly for
slide drilling
SMALL-SCALE CORE BARREL YKC-Y-109/67
SMALL-SCALE CORE BARREL YKC-Y-109/67
Ball joint with ballholder
T R A D E
YKC-Y-109/67 core barrel assembly for
slide drilling
Upper adaptor
Bearing hanger
67 мм
RECOMMENDED CORE BIT SIZE
118... 139,7 мм
DRAIN VALVE BALL DIAMETER
25,4 мм
CORE BARREL LENGTH:
ROTARY DRILLING ASSEMBLY
6525 мм
SLIDE DRILLING ASSEMBLY (USING MOTOR SHAFT)
4033 мм
Core barrel body
CORE RECEIVING PART LENGTH:
ROTARY DRILLING ASSEMBLY
6105 мм
SLIDE DRILLING ASSEMBLY (USING MOTOR SHAFT)
3080 мм
CONNECTION TYPE:
UPPER TO MOTOR, ROTOR
LOWER TO CORE BIT
CORE BARREL WEIGHT
Pin 3-76
national Standard
5286-75
Pin SP. TT 94x5,08x1:32
125 kg ... 160 kg
Core catcher
Bottom adaptor
Core breaker
Y6-122/67 SC-3 CT core bit
26
27
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
CORE BREAKERS
UDOL produces core breakers for the
majority of Russian core barrel types
such as YKR, SKU, YKCS-Y, etc., as well
as for foreign “DBS Security” and “Baker
Hughes”.
UDOL core breakers with their use of
different types of cutters from spade cutter
for soft and loose formations to double
collet-type for hard formations provide 100
% core recovery in formations of various
drillability rates. For reliable core breaking
and catching collet fingers are coated with
hard-alloy hardfacing, which ensures a
quick core break-off from the bottom hole.
Hard alloy diamond hardfacing, that is
applied on the internal surface of the collet
ensures reliable core retention during its
recovery.
To reduce core washout while drilling, core
breakers are provided with an additional
barrel that stops the mud from effecting
the core.
ЗDue to fingers of the rotating shoe,
the core catcher stays fixed during core
recovery. Because of that core friction on
pipe walls is reduced, which results in the
increase of the core recovery percentage.
CORE BREAKERS
#
1
2
3
4
5
6
7
8
9
10
11
12
28
DESIGNATION
CORE BREAKKRS
T R A D E
APPLICATION
Y KPC2 - 52
YKP – 122/52, CKY -122/52 Core barrel
Y KP2-67
YKP – 122/67, CKY -122/67 Core barrel
Spare parts for Y KP2-67:
-
finger-type breaker YPP-67
-
∅ 67 mm core breaker assembling key
Y KPC-67A
UDOL YKC-Y-109/67 Core barrel
Spare parts for Y KPC-67A:
-
finger-type breaker YPP-67
-
collet-type catcher YCP-67A (with diamond coating)
Y KC - 80
YKP -164/80 Core barrel
Y KCP - 80
YKP -164/80 Core barrel
Y KPCB - 80
YKP -164/80 Core barrel
Spare parts for Y KC-80, Y KCP – 80 and Y KPCB - 80:
-
finger-type breaker YPP-80
-
collet-type catcher YCP-80
-
∅ 80 mm core breaker assembling key
Y KC - 100
CKY-172/100; YKP-172/100 Core barrel
Y KCP - 100
CKY-172/100; YKP-172/100 Core barrel
Y KPCB - 100
CKY-172/100; YKP-172/100 Core barrel
Spare parts for Y KC-100, Y KCP – 100 and Y KPCB - 100:
-
finger-type breaker YPP-100
-
rolling finger-type breaker YPPB-100
-
collet-type catcher YCP-100 (101.6)
-
∅ 100 mm core breaker assembling key
«Security DBS» 6-3/4"х4" (171.4/101.6)
Y KC – 101.6
Core barrel
«Security DBS» 6-3/4"х4" (171.4/101.6)
Y KCP – 101.6
Core barrel
«Security DBS» 6-3/4"х4" (171.4/101.6)
Y KPCB – 101.6
Core barrel
Spare parts for Y KC-101.6, Y KC2 – 101.6 and Y KPCB – 101.6:
-
collet-type breaker YCP- 101.6 (100)
-
finger-type catcher YPP-101.6
-
core breaker barrel (shoe) PC-3604.003
-
∅ 101.6 mm core breaker assembling key
29
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
SR LINE
SR LINE
Bicentric bits of SR line are designed for hole enlargement while drilling vertical, directional and
horizontal wells.
UDOL TWO MAIN BICENTRIC BIT TYPES
elongated profile to hold a given trajectory
shortened profile for control of deviation and
drift angles
Wide gauge for
bit stabilization
Narrow and shortened gauge
for increased steerability
of the bit
Tungsten carbide
hardfacing
to prevent
bit gauge wear
PDC
cutters
of a specially designed
impact resistant shape
Undereamer is equipped
with extra wear resistant
cutters to prolong bit life
BIT TYPE
DRIFT SIZE, MM
DRILL OUT SIZE,
MM
CONNECTION TYPE
FORMATION TYPE
У-93,5x108x79 SR-3 С
У-93,5x115x65 SR-2 СТ
У-100х114,Зхх76 SR-2 C
У-112x125x95 SR-4 МС
У-112x125x95 SR-2 C
У-114,2x132x95 SR-4 МС
У-116x127x105 SR-4 МС
У-120,6х132x105 SR-4 МС
У-120,6x132x105 SR-43 С
У-120,6x139x90 SR-2 С
У-120,6x142,8x95 SR-4 МС
У-120,6x146x95 SR-3 СТ
У-139,7x165x105 SR-4 МС
У-146Х161Х127 SR-4 МС
У-150х175х120 SR-4 МС
У-165,1x200x127 SR-4 МС
У-188x200x165 SR-24 С
У-215,9x237x155 SR-4 МС
93,5
93,5
100
112
112
114
116
120,6
120,6
120,6
120,6
120,6
139,7
146
150
165,1
146
215,9
108
115
114,3
125
125
132
127
132
132
139
142,8
146
165
161
175
200
161
237
3-66 box
3-66 box
3-65
3-76
3-76
3-76
3-76
3-76
3-76
3-76
3-76
3-76
3-76
3-88
3-88
3-88
3-117
3-117
Medium
Medium to Hard
Medium
Soft to medium
Medium
Soft to medium
Soft to medium
Soft to medium
Medium
Medium
Soft to medium
Medium to Hard
Soft to medium
Soft to medium
Soft to medium
Soft to medium
Medium
Soft to medium
У-120,6 X 132 X 105
SR-4 МС
DRIFT SIZE
DRILL OUT SIZE
MAXIMUM ABOVE BIT TOOL SIZE
NOZZLES
CONNECTION TYPE
WOB, T
RPM
FLOW RATE, L/S
120,6 mm
132 mm
105 mm
3 х ∅ 12 mm
3-76
2-4
60-220
8-12
PDC cutters with high impact
resistance are used
for protection from impacts
caused by vibrations
Stabilizing elements
that protect the cutters
from chipping
30
31
BICENTRIC PDC BITS
T R A D E
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
SPECIAL APPLICATION BITS
UDOL offers various special application bits designed
for different nonstandard use. Each bit is designed in
accordance with special requirements of a customer
and is manufactured with high quality like all UDOL
products.
Bits for borehole reaming, for hole walls
strengthening in unstable areas, for kickoff in open
holes at great depths in hard and very hard formations
are just a few tasks that UDOL engineers successfully
accomplish.
Using a wide experience in producing high quality
tools and equipment for drilling and well casing,
UDOL can solve the most difficult problems with
promptitude and reliability that are so important to
the customer.
HARD-ALLOY BITS
UDOL hard alloy bits have been designed for drilling-out of cement plugs and metal details of
casing bottom and liners, lowered into horizontal sideholes.
High wear resistance of cutting elements, absence of a weak rotating element in bearing arrangement that is typical for roller cone bits make bits of this line highly effective for breaking
down rubber and metal elements of the casing, as well as for drilling through cement sleeves and
plugs, while reducing risks of accidents.
Combined clearing system with washover ports directed to each cutting plate improves well
cleaning quality and its clearing from cuttings, as well as cools down the cutting plate more efficiently.
32
BIT TYPE
У 59 РИС
У 70 РИС
У 76 РИС
У 78 РИС
У 79 РИС
У 83 РИС, РВК, РСФ
У 84 РИС, РВК, РСФ
У 86 РИС, РВК, РСФ
У 92 РИС, РВК, РСФ
У 93 РИС, РВК, РСФ
У 94 РИС, РВК, РСФ
У 95 РИС , РВК, РСФ
У 98,4 РИС
У 103 PC
У 104.8 PC
У 108 PC
У 110 PC
У 114 PC
У 115 PC
У 116 PC
У 118 PC
У 120,6 PC
У 121 PC
У 122 PC
У 123 PC
У 123,8 PC
У 124 PC
У 124 ST-BK
У 125 PC
У 125,6 PC
У 128 PC
У 138,1 PC
У 139,7 PC
У 142РСП
У 142,9 РСП
У 144 РСП
У 146 РСП
У 152 РСП
У 215,9 РСП
У ДРЛ 212 (for borehole reaming)
У ДРЛ 214 (for borehole reaming)
У ДРЛ 215,9 (for borehole reaming)
У ДРЛ 290 (for borehole reaming)
У ДРЛ 292,3 (for borehole reaming)
SPECIAL APPLICATION BITS • HARD-ALLOY BITS
T R A D E
CONNECTION TYPE
Box 3-42
Box 3-42 (3-50)
Box 3-50
Box 3-50
Box 3-50
Box/ pin 3-65 (3-66)
Box/ pin 3-65 (3-66)
Box/ pin 3-65 (3-66)
Box/ pin 3-65 (3-66)
Box/ pin 3-65 (3-66)
Box/ pin 3-65 (3-66)
Box/ pin 3-65 (3-66)
Box/ pin 3-65 (3-66)
Box/ pin 3-65 (3-66)
Box/ pin 3-65 (3-66)
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-76
Pin 3-88
Pin 3-88
Pin 3-88
Pin 3-88
Pin 3-88
Pin 3-88
Pin 3-88
Pin 3-117
Pin 3-117
Pin 3-117
Pin 3-117
Pin 3-152
Pin 3-152
33
PDC BITS, PDC CORE BITS AND STABILIZERS
H O U S E
STABILIZERS
Spiral stabilizers (Y-KC) and stabilizers with straight blades (Y-KP) are intended for smoothing borehole walls and maintaining their sizes in medium and hard formations interbedded with
abrasive.
To meet customers’ demands UDOL produces stabilizers of different types and sizes beginning
from 110 to 295.3 mm with different types of connection threads. This enables drilling without
additional adaptors and placing stabilizers directly above the bits
STABILIZER TYPE
У-КС 110 СТ
У-КП 110 СТ
У-КС 112 СТ
У-КП 112 СТ
У-КС 114,3 СТ
У-КП 114,3 СТ
У-КС 118 СТ
У-КП 118 СТ
У-КС 120 СТ
У-КП 120 СТ
У-КС 120,6 СТ
У-КП 120,6 СТ
У-КС 122,8 СТ
У-КП 122,8 СТ
34
CONNECTION TYPE
FROM THE WELL HEAD SIDE
FROM THE WELL BOTTOM SIDE
Box/ pin 3-65...3-76
Box/ pin 3-65...3-76
Box/ pin 3-65...3-76
Box/ pin 3-65...3-76
Box/ pin 3-65...3-76
Box/ pin 3-65... 3-76
Box/ pin 3-76.. 3-86
Box/ pin 3-76... 3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76..,3-86
ОБОЗНАЧЕНИЯ
У-КС 123 СТ
У-КП 123 СТ
У-КС 123,8 СТ
У-КП 123,8 СТ
У-КС 124 СТ
У-КП 124 СТ
У-КС 125 СТ
У-КП 125 СТ
У-КС 138 СТ
У-КП 138 СТ
У-КС 138,1 СТ
У-КП 138,1 СТ
У-КС 139,7 СТ
У-КП 139,7 СТ
У-КС 141 СТ
У-КП 141 СТ
У-КС 142 СТ
У-КП 142 СТ
У-КС 142,9 СТ
У-КП 142,9 СТ
У-КС 144 СТ
У-КП 144 СТ
У-КС 144,4 СТ
У-КП 144,4 СТ
У-КС 145 СТ
У-КП 145 СТ
У-КС 146 СТ
У-КП 146 СТ
У-КС 149,2 СТ
У-КП 149,2 СТ
У-КС 151 СТ
У-КП 151 СТ
У-КС 152,4 СТ
У-КП 152,4 СТ
У-КС 152,4 СТ
У-КП 152,4 СТ
У-КС 155,4 СТ
У-КП 155,4 СТ
У-КС 155,6 СТ
У-КП 155,6 СТ
У-КС 163 СТ
У-КП 163 СТ
У-КС 165,1 СТ
У-КП 165,1 СТ
У4-КС 215,9 СТ
У4-КП 215,9 СТ
У4-КС 295,3 СТ
У4-КП 295,3 СТ
STABILIZERS
T R A D E
ПРИСОЕДЕНИТЕЛЬНАЯ РЕЗЬБА
СО СТОРОНЫ УСТЬЯ
СО СТОРОНЫ ЗАБОЯ
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-76...3-86
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-88...3-102
Box/ pin 3-117...3-147
Box/ pin 3-117...3-147
Box/ pin 3-152...3-171
Box/ pin 3-152...3-171
35
LINER HANGING EQUIPMENT
UDOL has designed and set up a production line of eight main types of liner hanging equipment
∅ 101.6 mm and 114 mm TGS-type of different configurations and functions for various geological and technical conditions.
A use of retrievable setting tool BM.YU not only allows to safely cement by means of an advance
disconnection with a following possibility of drill string reciprocation during cement slurry injection and displace, but also reduces well casing cost.
MAIN OPTIONS OF LINER HANGING
LINER SIZE
102 mm
114 mm
102 mm
114 mm
102 mm
114 mm
36
LINER HANGING EQUIPMENT
H O U S E
PRODUCTION STRING SIZE
140 mm
146 mm
168 mm
178 mm
Without cementing
ТГС-101.6.00.000-02
ТГС-101.6.00.000-04
(abutting on
(abutting on
the bottomhole)
the bottomhole)
ТГС-114.000-02
(abutting on
the bottomhole)
ТГС.ОТН-114.10.000
(with a hydraulics hanger and a
relief valve)
WITH CONTINUOUS CEMENTING
ТГС-101.6.00.000
ТГС-101.6.00.000-03 ТГС-114.102.000-03
(with a mechanical
(with a hydraulics
(combined with a
hanger)
hanger)
hydraulics hanger)
ТГС-114.000
(with a mechanical
hanger)
ТГС-114.000-03
(with a hydraulics
hanger)
WITH COLLAR CEMENTING
ТГС-101.6.00.000-06
(with a hydraulics
hanger and
a cut-off
sealing packer
Y-P3GO-102.00.000)
ТГС-114.000-06
(with a hydraulics
hanger and
a cut-off
sealing packer
Y-P3GO-114.000)
PRODUCTION STRING SIZE
140 mm
146 mm
168 mm
178 mm
WITH COLLAR CEMENTING WITH FILTERS
ТГС-101.6.00.000-08
(with a hydraulics
hanger and a cement102 mm
ing closing collar TGC.
MC3-102.000 and cutoff packer TGC.PGO102.000)
ТГС-114.000-08
(with a hydraulics
hanger and a cementing closing
114 mm
collar TGC. MC3114.000 and cut-off
packer TGC.PGO114.000)
WITH CONTINUOUS CEMENTING WITHOUT A HANGER (ABUTTING ON THE BOTTOMHOLE)
102 mm
ТГС-101.6.00.000-02
ТГС-101.6.00.000-04
ТГС-114.102.000
114 mm
ТГС-114.000-02
LINER SIZE
In addition to the main types of tools for most common liner connection types, our equipment
can be produced individually for various purposes and for special well casing conditions.
37
LINER HANGING EQUIPMENT
T R A D E
T R A D E
39
Liner
Polished rod
Adjustment tool
ВМ.УИ-00.000-01
Slip hange
ТГС-101.6.11.000
Seal assembly
Paker ТГС-101.6.12.000
Top cementing plug
ТГС-101.6.17.000
Adjustment tool
ВМ.УИ-00.000-01
H O U S E
Liner
Adapter ТГС-102.330
Back pass valve ТГС-101.6.15.000
Stop ring ТГС-101.6.15.000
Shoe ТГС-101.6.19.000
225 + 10 atm
SEALNESS TESTS PRESSURE OF ALL UNITS
Liner wiper plug ТГС-101.6.16.000
350 ± 35 atm
Box 3-86 national standard
52BG-75
ОТТМ-Ю2 ТУ 14-161-163-96
85 mm
105 ± 10 atm
6. ..9 t
STRENGTH TESTS PRESSURE OF CASES OF ALL
UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
AXIAL LOAD FOR TOP PACKER GO OFF
CUTTING PRESSURE OF LINER WIPER PLUG
INTERNAL DRIFT DIAMETER
TECHNICAL FEATURES:
• A reusable adjustment tool reduces well casing expenses
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• The ratio of a maximal possible internal diameter of a hanger to the
minimal outside diameter allows to use this equipment set in the wells
with a heavyweight casing;
• This equipment set allows to work pipe during the liner cementing
with a tension stress application of up to 90 tF;
SPECIAL FEATURES:
LINER HANGER X ∅ 102 MM IN 140 MM DRILLSTRING
Using BM.YU-00.000-01 and TGC-101.6.00.000 equipment sets
LINER HANGING EQUIPMENT
T R A D E
41
Liner
Polished rod
Adjustment tool
ВМ.УИ-00.000-01
Hydraulic hanger
ТГС-102.210
Seal assembly
Paker ТГС-102.220
Brass ball ∅ 25.4 mm
Top cementing plug
ТГС-102.270
Adjustment tool
ВМ.УИ-00.000-01
H O U S E
Liner
10-12 t
CUTTING PRESSURE OF LINER WIPER PLUG
AXIAL LOAD FOR TOP PACKER GO OFF AND
FIXATION
Back pass valve ТГС-102.070
Ball-and-seat ТГС-102.250
Stop ring ТГС-102.240
Grab ТГС-102.320
Shoe ТГС-102.490
225 + 10 atm
SEALNESS TESTS PRESSURE OF ALL UNITS
Liner wiper plug ТГС-102.560 М5
350 ± 35 atm
STRENGTH TESTS PRESSURE OF CASES OF ALL
UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
CUTTING PRESSURE OF BALL-AND-SEAT
Box 3-S6 national standard
5286-75
ОТТМ-102 TV 14-161-163-96
160 ± 10 atm
HYDRAULIC HANGER GOING OFF PRESSURE
INTERNAL DRIFT DIAMETER
88 mm
95 + 20 atm
134 ± 8 atm
ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ:
• A reusable adjustment tool reduces well casing expenses .
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• The internal drift diameter of the TGC hanger after fixation equals to
the drift diameter of the liner;
• This equipment set allows to work pipe during the liner cementing;
SPECIAL FEATURES:
LINER HANGER X ∅102 MM IN 146 MM DRILLSTRING
Using BM.YU-00.000-01 and TGC-101.6.00.000-03 equipment sets
LINER HANGING EQUIPMENT
T R A D E
43
Polished rod
Liner
Back pass valve ТГС-102.070
Stop ring
ТГС-102.240
Liner
Adjustment tool
ВМ.УИ-00.000-01
Paker ТГС-102.220
LINER HANGING EQUIPMENT
225 +10 atm
SEALNESS TESTS PRESSURE OF ALL
UNITS
Shoe ТГС-102.390
Liner wiper plug ТГС-102.560 М5
350 ±35 atm
STRENGTH TESTS PRESSURE OF CASES
OF ALL UNITS
LINER CONNECTION
TOOL CONNECTION
Box 3-86 national standard
5286-75
ОТТМ-102 ТУ 14-161-183-96
10-12 t
AXIAL LOAD FOR TOP PACKER GO OFF
AND FIXATION
CONNECTION TYPES:
160 ±10 atm
88 mm
CUTTING PRESSURE OF LINER WIPER
PLUG
INTERNAL DRIFT DIAMETER
TECHNICAL FEATURES:
• A reusable adjustment tool reduces well casing expenses.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working
condition due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an
evenly sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a
guaranteed back off a tool from the liner, before or after
cementing;
• The internal drift diameter of the TGC hanger after fixation
equals to the drift diameter of the liner;
• This equipment set allows to work pipe during the liner cementing;
SPECIAL FEATURES:
LINER HANGER X ∅ 102 MM IN 146 MM DRILLSTRING
Using BM.YU-00.000-01 and TGC-101.6.00.000-04 equipment sets
Seal assembly
Top cementing plug
ТГС-102.270
Adjustment tool
ВМ.УИ-00.000-01
H O U S E
T R A D E
45
Paker У-ПЗГО-102.00.000
Liner
Polished rod
Adjustment tool
ВМ.УИ-00.000-01
Hydraulic hanger
ТГС-102.210
Seal assembly
Paker ТГС-102.220
Brass ball ∅ 25.4 mm
Top cementing plug
ТГС-102.270
Adjustment tool
ВМ.УИ-00.000-01
H O U S E
Liner
170 ± 15 atm
10-12 t
CUTTING PRESSURE OF LINER WIPER PLUG
PAKER Y-P3GO GOING OFF PRESSURE
Back pass valve ТГС-102.070
Ball-and-seat ТГС-102.250
Stop ring ТГС-102.240
Shoe ТГС-102.490
Grab ТГС-102.320
Liner wiper plug ТГС-102.560 М5
SEALNESS TESTS PRESSURE OF ALL UNITS
STRENGTH TESTS PRESSURE OF CASES OF ALL UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
AXIAL LOAD FOR TOP PACKER GO OFF AND FIXATION
CUTTING PRESSURE OF BALL-AND-SEAT
Box 3-86 national standard
5286-75
ОТТМ-Ю2 ТУ 14-161-163-96
350 ± 35 atm
225 + 10 atm
160 ± 10 atm
HYDRAULIC HANGER GOING OFF PRESSURE
INTERNAL DRIFT DIAMETER
88 mm
95 + 20 atm
134 ± 8 atm
TECHNICAL FEATURES:
• A reusable adjustment tool reduces well casing expenses.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• The internal drift diameter of the TGC hanger after fixation equals to
the drift diameter of the liner;
• This equipment set allows to work pipe during the liner cementing;
SPECIAL FEATURES:
с применениеUsing BM.YU-00.000-01 and TGC-101.6.00.000-06 equipment sets
ПОДВЕСКLINER HANGER X ∅ 102 MM IN 146 MM DRILLSTRING
LINER HANGING EQUIPMENT
T R A D E
47
LINER HANGING EQUIPMENT
Box ТГС.МЦЗ-102.000
170 + 18 atm
50 ± 5 atm
10-12 t
PAKER TGC-PGO GOING OFF PRESSURE
BOX FILLING HOLE OPENING PRESSURE TGC.
MC3
BOX FILLING HOLE CLOSING PRESSURE TGC.
MC3
AXIAL LOAD FOR TOP PACKER GO OFF AND
FIXATION
Filter
Ball-and-seat choke
ТГС-102.450
Paker ТГС.ПГО-102.000
Shoe ТГС-102.490
225 + 10 atm
SEALNESS TESTS PRESSURE OF ALL UNITS
Stabilizer adapter ТГС-102.340
350 ± 35 atm
STRENGTH TESTS PRESSURE OF CASES OF ALL
UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
CUTTING PRESSURE OF LINER WIPER PLUG
Box 3-86 national standard
5286-75
ОТТМ-Ю2 ТУ 14-161-163-96
135 + 15 atm
HYDRAULIC HANGER GOING OFF PRESSURE
INTERNAL DRIFT DIAMETER
88 mm
95 + 20 atm
134 ± 8 atm
TECHNICAL FEATURES:
• A reusable adjustment tool reduces well casing expenses.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• The ratio of a maximal possible internal diameter of a hanger to the
minimal outside diameter allows to use this equipment set in the wells
with a heavyweight casing;
• This equipment set allows to work pipe during the liner cementing
with a tension stress application of up to 90 tF;
SPECIAL FEATURES:
LINER HANGER X ∅ 102 MM IN 146 MM DRILLSTRING
Using BM.YU-00.000-01 and TGC-101.6.00.000-08 equipment sets
Liner wiper plug ТГС-102.560 М5
Liner
Polished rod
Adjustment tool
ВМ.УИ-00.000-01
Hydraulic hanger
ТГС-102.210
Paker ТГС-102.220
Seal assembly
Brass ball ∅ 25.4 mm
Top cementing plug
ТГС-102.270
Adjustment tool
ВМ.УИ-00.000-01
H O U S E
T R A D E
49
Liner
Polished rod
Adjustment tool
ВМ.УИ-114.400
Slip hanger
ТГС-114.200
Seal assembly
Paker ТГС-114.400
Top cementing plug
ТГС-114.600
Adjustment tool
ВМ.УИ-114.000
H O U S E
Liner
Back pass valve ТГС-114.070
Stop ring ТГС-114.400
Shoe ТГС-114.710
250 + 10 atm
SEALNESS TESTS PRESSURE OF ALL UNITS
Liner wiper plug ТГС-114.500
340 + 10 atm
Box 3-102 national standard
5286-75
OTTM-114 national standard
632-80
98 mm
120 ± 10 atm
18 ± 2 t
STRENGTH TESTS PRESSURE OF CASES OF ALL
UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
AXIAL LOAD FOR TOP PACKER GO OFF
CUTTING PRESSURE OF LINER WIPER PLUG
INTERNAL DRIFT DIAMETER
TECHNICAL FEATURES:
• A reusable adjustment tool reduces well casing expenses.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• This equipment set allows to work pipe during the liner cementing with
a tension stress application of up to 90 tF;
SPECIAL FEATURES:
LINER HANGER X ∅ 114 MM IN 168 MM DRILLSTRING
Using BM.YU-114.000 and TGC-114.000 equipment sets
LINER HANGING EQUIPMENT
T R A D E
51
Liner
Polished rod
Back pass valve ТГС-114.070
Liner wiper plug
ТГС-114.400
Liner
Adjustment tool
ВМ.УИ-114.000
Paker ТГС-114.100
LINER HANGING EQUIPMENT
Shoe ТГС-114.710
Stop ring ТГС-114.500
SEALNESS TESTS PRESSURE OF ALL UNITS
STRENGTH TESTS PRESSURE OF CASES OF ALL UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
AXIAL LOAD FOR TOP PACKER GO OFF AND FIXATION
CUTTING PRESSURE OF LINER WIPER PLUG
INTERNAL DRIFT DIAMETER
TECHNICAL FEATURES:
Box 3-102 national standard
5286-75
OTTM-114 national standard
632-80
330 ±10 atm
330 ±10 atm
98 mm
120 ± 10 atm
18 ± 2 t
• A reusable adjustment tool reduces well casing expenses.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• The internal drift diameter of the TGC hanger after fixation equals to
the drift diameter of the liner;
• This equipment set allows to work pipe during the liner cementing;
SPECIAL FEATURES:
LINER HANGER X ∅ 114 114 MM IN 168 MM DRILLSTRING
Using BM.YU-114.000 and TGC-114.000-02 equipment sets
Seal assembly
Top cementing plug
ТГС-114.600
Adjustment tool
ВМ.УИ-114.000
H O U S E
T R A D E
53
Liner wiper plug ТГС-114.500
Liner
Polished rod
Adjustment tool
ВМ.УИ-114.000
Hydraulic hanger
ТГС-114.030
Seal assembly
Paker ТГС-114.100
Brass ball ∅ 25.4 mm
Liner
• This equipment set allows to work pipe during the liner cementing with
a tension stress application of up to 90 tF;
Top cementing plug
ТГС-114.600
120 ± 10 atm
CUTTING PRESSURE OF LINER WIPER PLUG
Box 3-102 national standard
5286-75
OTTM-U2 national standard
632-80
340 ± 10 atm
225 ± 10 atm
Back pass valve ТГС-114.070
Ball-and-seat choke ТГС-114.050
Stop ring ТГС-114.400
Shoe ТГС-114.710
Back pass valve with a grab
ТГС-114.070
SEALNESS TESTS PRESSURE OF ALL UNITS
STRENGTH TESTS PRESSURE OF CASES OF ALL UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
AXIAL LOAD FOR TOP PACKER GO OFF AND FIXATION
CUTTING PRESSURE OF BALL-AND-SEAT
10 ± 2 t
S6 mm
125 ± 5 atm
160 ±10 atm
INTERNAL DRIFT DIAMETER
HYDRAULIC HANGER GOING OFF PRESSURE
TECHNICAL FEATURES:
• A reusable adjustment tool reduces well casing expenses.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• The internal drift diameter of the TGC hanger after fixation equals to
the drift diameter of the liner;
SPECIAL FEATURES:
LINER HANGER X ∅ 114 MM IN 168 MM DRILLSTRING
Using BM.YU-114.000 and TGC-114.000-03 equipment sets
LINER HANGING EQUIPMENT
Adjustment tool
ВМ.УИ-114.000
H O U S E
T R A D E
55
Paker У-ПЗГО-114.000
Liner
Polished rod
Adjustment tool
ВМ.УИ-114.000
Hydraulic hanger
ТГС-114.030
Seal assembly
Paker ТГС-114.100
Brass ball ∅ 25.4 mm
Top cementing plug
ТГС-114.600
Adjustment tool
ВМ.УИ-114.000
H O U S E
CUTTING PRESSURE OF LINER WIPER PLUG
Liner
Shoe ТГС-114.710
Back pass valve with a grab ТГС-114.060
Ball-and-seat choke ТГС-114.050
Stop ring ТГС-114.400
Liner wiper plug ТГС-114.500
TOOL CONNECTION
Box 3-102 national standard
5286-75
OTTM-114 national standard
LINER CONNECTION
632-80
STRENGTH TESTS PRESSURE OF CASES OF ALL UNITS
340 ± 10 atm
SEALNESS TESTS PRESSURE OF ALL UNITS
250 ± 10 atm
CONNECTION TYPES:
AXIAL LOAD FOR TOP PACKER GO OFF AND FIXATION
CUTTING PRESSURE OF BALL-AND-SEAT
18 ± 2 t
120 ± 10 atm
HYDRAULIC HANGER GOING OFF PRESSURE
INTERNAL DRIFT DIAMETER
98 mm
125 ± 5 atm
160 ± 10 atm
TECHNICAL FEATURES:
• A reusable adjustment tool reduces well casing expenses.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• The internal drift diameter of the TGC hanger after fixation equals to
the drift diameter of the liner;
• This equipment set allows to work pipe during the liner cementing;
SPECIAL FEATURES:
LINER HANGER X ∅ 114 MM IN 168 MM DRILLSTRING
Using BM.YU-114.000 and TGC-114.000-06 equipment sets
LINER HANGING EQUIPMENT
T R A D E
57
LINER HANGING EQUIPMENT
Box ТГС.МЦЗ-114.000
170 ± 10 atm
55 ± 5 atm
18 ± 2 t
PAKER TGC-PGO GOING OFF PRESSURE
BOX FILLING HOLE OPENING PRESSURE TGC.
MC3
BOX FILLING HOLE CLOSING PRESSURE TGC.
MC3
AXIAL LOAD FOR TOP PACKER GO OFF AND
FIXATION
Filter
Ball-and-seat choke
ТГС-114.080
Shoe ТГС-114.710
250 ± 10 atm
SEALNESS TESTS PRESSURE OF ALL UNITS
Paker ТГС.ПГО-114.000
340 ± 10 atm
STRENGTH TESTS PRESSURE OF CASES OF ALL
UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
CUTTING PRESSURE OF LINER WIPER PLUG
Box 3-102 national standard
5286-75
OTTM-114 national standard
632-80
140 ± 10 atm
HYDRAULIC HANGER GOING OFF PRESSURE
INTERNAL DRIFT DIAMETER
98 mm
125 ± 5 atm
120 ± 10 atm
TECHNICAL FEATURES:
• A reusable adjustment tool reduces well casing expenses.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• The internal drift diameter of the TGC hanger after fixation equals to
the drift diameter of the liner;
• This equipment set allows to work pipe during the liner cementing;
SPECIAL FEATURES:
LINER HANGER X ∅ 114 MM IN 168 MM DRILLSTRING
Using BM.YU-114.000 and TGC-114.000-08 equipment sets
Liner wiper plug ТГС-114.500
Liner
Polished rod
Adjustment tool
ВМ.УИ-114.000
Hydraulic hanger
ТГС-114.030
Paker ТГС-114.100
Seal assembly
Brass ball ∅ 25.4 mm
Top cementing plug
ТГС-114.600
Adjustment tool
ВМ.УИ-114.000
H O U S E
T R A D E
59
Back pass valve
ТГС-102.070
Stop ring
ТГС-102.240
Polished rod
Liner
Adapter
ТГС-114.102.070
Adjustment tool
ВМ.УИ-114.000
Paker ТГС-114.100
LINER HANGING EQUIPMENT
225 ± 10 atm
SEALNESS TESTS PRESSURE OF ALL UNITS
Shoe ТГС-102.390
Liner wiper plug ТГС-102.570
330 ± 10 atm
Box 3-102 national standard
5286-75
ОТТМ-102 ТУ 14-161-163-96
18 ± 2 t
98 mm
120 ± 10 atm
STRENGTH TESTS PRESSURE OF CASES OF ALL
UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
AXIAL LOAD FOR TOP PACKER GO OFF AND
FIXATION
CUTTING PRESSURE OF LINER WIPER PLUG
INTERNAL DRIFT DIAMETER
TECHNICAL FEATURES:
• A reusable adjustment tool reduces well casing expenses.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner, before or after cementing;
• The internal drift diameter of the TGC hanger after fixation equals to
the drift diameter of the liner;
• This equipment set allows to work pipe during the liner cementing;
SPECIAL FEATURES:
LINER HANGER X ∅ 102 MM IN 168 MM DRILLSTRING
Using BM.YU-114.000 and TGC-114.102.000 equipment sets
Seal assembly
Top cementing plug
ТГС-102.070
Adjustment tool
ВМ.УИ-114.000
H O U S E
T R A D E
61
H O U S E
Liner
Hanger
ТГС.ОТН-114.10.000
Filter
SEALNESS TESTS PRESSURE OF ALL UNITS
STRENGTH TESTS PRESSURE OF CASES OF ALL UNITS
LINER CONNECTION
TOOL CONNECTION
CONNECTION TYPES:
AXIAL LOAD FOR TOP PACKER GO OFF AND FIXATION
CUTTING PRESSURE OF BALL-AND-SEAT
HYDRAULIC HANGER GOING OFF PRESSURE
INTERNAL DRIFT DIAMETER
TECHNICAL FEATURES:
Shoe ТГС-114.710
Box 3-102 national standard
5286-75
OTTM-114 national standard 53280
320 ±10 atm
250 + 10 atm
22 ± 2 t
98 mm
130 ± 5 atm
102 ± 3 atm
• The design of the hanger, materials used as well as high quality
manufacture allows to apply tensile strength of up to 90 t during liner
setting.
• Every part of the hanger is tensile, strength and sealness tested;
• After going off the packer securely fixates in its open working condition
due to its arresting device;
• A rubber sealing of a packer of an unusual shape allows for an evenly
sealed coverage of an annular space;
• A mechanical paker is independent from the well pressure which
eliminates the possibility of it going off before the liner run in hole is
completed;
• Adapter sub unit design with a left-hand thread ensures a guaranteed
back off a tool from the liner;
• The internal drift diameter of the TGC hanger after fixation equals to the
drift diameter of the liner;
• This equipment set is completely ready for use and does not require any
preparation before run in hole;
SPECIAL FEATURES:
LINER HANGER X ∅ 114 MM IN 168 (178) MM DRILLSTRING
Using TGC.OTH-114.10.000 equipment sets
LINER HANGING EQUIPMENT
H O U S E
LEAP SEAL
A leap seal is used with sealing equipment TGC to eliminate cement pipe lowering into the pay
zone while cementing.
LEAP SEAL TYPE
LEAP SIZE, MM
УМ-ТГС-101.6.21.000-01
УМ-ТГС-101.6.21.000-02
УМ-ТГС-114.800
126
129
146
TECHNICAL FEATURES:
DRIFT HOLE SIZE
CONNECTION THREADS IN ACCORDANCE WITH THE NATIONAL
STANDARD 5286-75
WORKING SUBSTANCE
WEIGHT
МЦС.М-146
ОТТМ
МЦС.М-146
БТС
CONNECTION TYPE
ОТТМ - 146
бтс - 146
OUTSIDE DIAMETER
178 mm
178 mm
INSIDE DIAMETER OF SETTING
PLUG
110 mm
110 mm
INSIDE DIAMETER OF STOP-RING
100 mm
100 mm
PASS DIAMETER AFTER DRILLOUT
128 mm
128 mm
FILLING HOLE CLOSING PRESSURE *
20…40 atm
20…40 atm
2
2
20 mm
20 mm
МЦС.М-168
ОТТМ
МЦС.М-168
БТС
CONNECTION TYPE
ОТТМ - 168
бтс - 168
OUTSIDE DIAMETER
197 mm
197 mm
INSIDE DIAMETER OF SETTING
PLUG
132 mm
132 mm
INSIDE DIAMETER OF STOP-RING
110 mm
110 mm
PASS DIAMETER AFTER DRILLOUT
150 mm
150 mm
FILLING HOLE CLOSING PRESSURE *
20…40 atm
20…40 atm
3
3
20 mm
20 mm
FILLING HOLES DIAMETER
The purpose of this tool is to cement liners sized 101.6 mm
and 114.3 mm while allowing for simultaneous strings settings
during cementing.
PILOT PRESSURE
Multi-stage cementing collars are used for casing cementing operations in conditions of noninsolated lost circulation zones with a purpose of reducing overburden on lost and pay zones.
Collars MCS.M are produced with 2 types of flushing hole opening:
01 – under a pressure of 135 atm
02 – under a pressure of 160 atm
FILLING HOLES NUMBER
UNIVERSAL CEMENT HEAD
GCY-102/114-250-3
WORK PRESSURE
MULTI-STAGE CEMENTING COLLARS
250 atm
375 atm
57 mm
Box 3-102 pin 3-86
(to the drillstring)
Cement and drill muds
92 kg
FILLING HOLES NUMBER
FILLING HOLES DIAMETER
62
63
WELL CEMENTING EQUIPMENT
T R A D E
H O U S E
МЦС.М-178 БТС
CONNECTION TYPE
БТС – 178
OUTSIDE DIAMETER
205 mm
INSIDE DIAMETER OF SETTING
PLUG
140 mm
INSIDE DIAMETER OF STOP-RING
125 mm
PASS DIAMETER AFTER DRILLOUT
158 mm
FILLING HOLE CLOSING PRESSURE *
20…40 atm
3
FILLING HOLES NUMBER
SHUTOFF PACKER PGO-146
A shutoff packer PGO-146 is used for
increasing nearby beds separation quality
while ∅146 mm production string cementing
and shaping a high-strength, sealed rubber
and cement barrier.
A shutoff packer together with MCS.M-146
type multiple- stage collar is used for
increasing nearby beds separation quality
with two- stage cementing method under
the difficult conditions without time breaks for waits on cement.
An important design feature of the shutoff packer is internal flush diameter with ∅ 146 mm
casing strings and absence of elements that close the flowing channel before pucker goes off or
after it.
20 mm
FILLING HOLES DIAMETER
SHUTOFF PACKER TYPE
ПГО-146.ОТТМ-13
CONNECTION TYPE
PACKER GO OFF PRESSURE
LENGTH
CONNECTION TYPE
МЦС.М-245
БТС
ОТТМ-245
БТС-245
OUTSIDE DIAMETER
275 mm
INSIDE DIAMETER OF SETTING
PLUG
200 mm
INSIDE DIAMETER OF STOP-RING
175 mm
PASS DIAMETER AFTER DRILLOUT
224 mm
FILLING HOLE CLOSING PRESSURE *
30…60 atm
FILLING HOLES NUMBER
FILLING HOLES DIAMETER
* over the end working pressure
3
28 mm
WEIGHT
ПГО-146.ОТТМ-16
ПГО-146.БТС-16
ОТТМ-146
БТС-146
100…120 atm
OUTSIDE DIAMETER
МЦС.М-245
ОТТМ
ПГО-146.БТС-13
1250 mm
90 kg
ОТТМ-146
БТС-146
130…150 atm
192 mm
1350 mm
1250 mm
1350 mm
96 kg
90 kg
96 kg
HYDROMECHANICAL PACKER PGM-195
Hydromechanical packer is set
in open borehole oil and gas fields
while researching and isolating
lost circulation zones. It consists of
three main units: anchor, packing
and nipple.
PERMISSIBLE PRESSURE DROP ON PACKER
PRESSURE DROP WHILE PACKING
AXIAL LOAD ON RUBBER SEALING ELEMENTS WHILE PACKING
DIAMETER OF PACKER PASS LINE
JAWS DIAMETER IN OPERATION POSITION
CONNECTION TYPE
160 atm
20-30 atm
15 t
70 mm
230 mm
3-147 national
standard 5286-75
OVERALL DIMENSIONS:
DIAMETER
LENGTH
WEIGHT
64
195 mm
2260 mm
240 kg
65
WELL CEMENTING EQUIPMENT
T R A D E
H O U S E
RETRIEVABLE DRILLABLE PACKER PRC-112
RETRIEVABLE DRILLABLE PACKER PRC-195
A retrievable drillable packer PRS-112 is applied
together with a hydraulic head GP-112 as a sealing for
annular space separation from lost circulation zones
by isolating these zones in 124 mm wells, and as an
isolator for the bottom part of the borehole to create a
plugged back total depth.
The paker is designed to be applied in two situations:
1. With a plug as a shutoff bridge
2. With an end-to-end channel for a possibility of
cementing operation after packing
.
A retrievable drillable packer PRS-195 is applied
together with the hydraulic head GP-195 as a sealing
for annular space separation from lost circulation
zones by isolating these zones in 215.9 mm wells, and
as an isolator for the bottom part of the borehole to
create a plugged back total depth.
The paker is designed to be applied in two situations:
1. With a plug as a shutoff bridge
2. With an end-to-end channel for a possibility of
cementing operation after packing.
PAKING PRESSURE
PACKING AXUAL LOAD
MAXIMUM BOREHOLE DIAMETER, OVERLAPPED BY PACKER
DIAMETER OF PACKER PASS HOLE
DIAMETER OF PACKER SADDLE PORT
CONNECTION THREAD TO THE HYDRAULIC HEAD GP-112
75...90 atm
10...12 t
134 mm
48 mm
40 mm
Tr 55x3LH national standard 9484-81
OVERALL DIMENSIONS:
MAXIMUM SHOE PACKER DIAMETER
OUTSIDE COLLAR DIAMETER
LENGTH
WEIGHT
112 mm
112 mm
420 mm
10 kg
PAKING PRESSURE
PACKING AXUAL LOAD
MAXIMUM BOREHOLE DIAMETER, OVERLAPPED BY PACKER
DIAMETER OF PACKER PASS HOLE
DIAMETER OF PACKER SADDLE PORT
CONNECTION THREAD TO THE HYDRAULIC HEAD GP-112
MAXIMUM SHOE PACKER DIAMETER
OUTSIDE COLLAR DIAMETER
LENGTH
WEIGHT
HYDRAULIC HEAD GP-195
The purpose of the hydraulic head
GP-112 is to delivery the PRS-112
packer to the set place in the well
and put it into an operating position.
The purpose of the hydraulic head
GP-195 is to deliver the PRS-195
packer to the set place in the well
and put it into an operating position.
PACKING AXUAL LOAD
DIAMETER OF PACKER PASS
75...90 atm
10...12 t
46 mm
PRS-112 PACKER
3-76 national standard 50864-96
Tr 55x3LH national standard 9484-81
LENGTH
WEIGHT
66
PACKING AXUAL LOAD
DIAMETER OF PACKER PASS
75...90 atm
12...15 t
85 mm
DRILL STRINGS
PRS-112 PACKER
3-113 national standard 5286-75
Tr 100x5LH national standard 9484-81
OVERALL DIMENSIONS:
OVERALL DIMENSIONS:
DIAMETER
PAKING PRESSURE
200 mm
195 mm
695 mm
40 kg
CONNECTION THREADS TO:
CONNECTION THREADS TO:
DRILL STRINGS
75...90 atm
12...15 t
227 mm
95 mm
70 mm
Tr 100x5LH national standard 9484-81
OVERALL DIMENSIONS:
HYDRAULIC HEAD GP-112
PAKING PRESSURE
WELL CEMENTING EQUIPMENT
T R A D E
112 mm
980 mm
60 kg
DIAMETER
LENGTH
WEIGHT
195 mm
1365 mm
130 kg
67
H O U S E
SOLID BOW-SPRING CENTRALIZERS
ЦПН-168/216
The main feature of the CPN centralizer is its solid design, which gives it the following advantages:
A PASSAGE DIAMETER SUITABLE FOR THE CASING
BOWS MAXIMUM DIAMETER
• A MORE RELIABLE STABILIZATION OF A CASING STRING IN A BOREHOLE;
• NO NEED FOR A CENTRALIZER PRE-ASSEMBLY;
• A FAST AND EASY PLACEMENT ON THE STRING;
• A REDUCED RISK OF COMPONENTS LOSS;
• A MORE RELIABLE FIXATION ON THE STRING;
• A CONVENIENT KEY FOR CENTRALIZER FIXATION INCLUDED IN THE SET.
OUTSIDE RING DIAMETER
BOW COUNT
WELL CEMENTING HARDWARE
T R A D E
168 mm
267±2 mm
180 mm
6
CENTRALIZER WEIGHT
2 kg
CENTRALIZER LENGTH
420 mm
A PASSAGE DIAMETER SUITABLE FOR THE CASING
178 mm
ЦПН-102/140
A PASSAGE DIAMETER SUITABLE FOR THE CASING
102 mm
BOWS MAXIMUM DIAMETER
154 mm
OUTSIDE RING DIAMETER
115 mm
BOW COUNT
ЦПН-178/216
BOWS MAXIMUM DIAMETER
OUTSIDE RING DIAMETER
5
CENTRALIZER WEIGHT
1 kg
CENTRALIZER LENGTH
330 mm
BOW COUNT
265±2 mm
192 mm
6
CENTRALIZER WEIGHT
2 kg
CENTRALIZER LENGTH
445 mm
A PASSAGE DIAMETER SUITABLE FOR THE CASING
245 mm
ЦПН-114/155
A PASSAGE DIAMETER SUITABLE FOR THE CASING
BOWS MAXIMUM DIAMETER
OUTSIDE RING DIAMETER
BOW COUNT
114 mm
160±2 mm
126 mm
6
CENTRALIZER WEIGHT
1,3 kg
CENTRALIZER LENGTH
330 mm
ЦПН-245/295
BOWS MAXIMUM DIAMETER
OUTSIDE RING DIAMETER
BOW COUNT
328±2 mm
264 mm
8
CENTRALIZER WEIGHT
5 kg
CENTRALIZER LENGTH
445 mm
ЦПН-146/216
A PASSAGE DIAMETER SUITABLE FOR THE CASING
BOWS MAXIMUM DIAMETER
OUTSIDE RING DIAMETER
BOW COUNT
68
146 mm
240±2 mm
159 mm
6
CENTRALIZER WEIGHT
1,7 kg
CENTRALIZER LENGTH
423 mm
69
ТЕХНОЛОГИЧЕСКОЕ ОБОРУДОВАНИЕ И ОСНАСТКА
H O U S E
GOVERNOR REVERSE VALVES
Governor reverse valves are used for continuous self-filling of casing string with mud while running and for prevention of mud backflow from annual space into casing while cementing.
Governor reverse valves application allows running a casing string with or without a ball on a
valve saddle, which ensures self-filling of casing with mud.
SPIRAL CAST TURBOLIZERS
DESIGNATION
CONNECTION TYPE
ЦКОД -146 ОТТМ
ЦКОД-146 БТС
ОТТМ-146
БТС-146
150 atm
10…15 atm
166 mm
320 mm
19,8 kg
OPERATING PRESSURE
BALL PUSHING PRESSURE
ЦТСЖ-146/206-210
A PASSAGE DIAMETER SUITABLE FOR THE CASING
INSIDE DIAMETER
OUTSIDE BLADE DIAMETER
BLADE COUNT
HEIGHT
146 mm
149 mm
206÷210 mm
4
235 mm
OUTSIDE DIAMETER
LENGTH
WEIGHT
DESIGNATION
CONNECTION TYPE
ЦКОД -168 ОТТМ
ЦКОД-168 БТС
ОТТМ-168
БТС-168
150 atm
10…15 atm
188 mm
350 mm
20,3 kg
OPERATING PRESSURE
BALL PUSHING PRESSURE
ЦТСЖ-168/206-210
A PASSAGE DIAMETER SUITABLE FOR THE CASING
INSIDE DIAMETER
OUTSIDE BLADE DIAMETER
BLADE COUNT
HEIGHT
OUTSIDE DIAMETER
168 mm
170 mm
206÷210 mm
4
235 mm
LENGTH
WEIGHT
DESIGNATION
CONNECTION TYPE
ЦКОД -178 ОТТМ
ЦКОД-178 БТС
ОТТМ-178
БТС-178
150 atm
10…15 atm
198 mm
320 mm
26 kg
OPERATING PRESSURE
BALL PUSHING PRESSURE
OUTSIDE DIAMETER
STRAIGHT-BLADED CAST POSITIVE CENTRALIZERS
LENGTH
ЦПЖ-146/206-210
DESIGNATION
A PASSAGE DIAMETER SUITABLE FOR THE CASING
INSIDE DIAMETER
OUTSIDE BLADE DIAMETER
BLADE COUNT
HEIGHT
146 mm
149 mm
206÷210 mm
4
235 mm
WEIGHT
CONNECTION TYPE
OPERATING PRESSURE
BALL PUSHING PRESSURE
OUTSIDE DIAMETER
LENGTH
WEIGHT
DESIGNATION
ЦПЖ-168/206-210
A PASSAGE DIAMETER SUITABLE FOR THE CASING
INSIDE DIAMETER
OUTSIDE BLADE DIAMETER
BLADE COUNT
HEIGHT
70
CONNECTION TYPE
168 mm
170 mm
206÷210 mm
4
235 mm
OPERATING PRESSURE
BALL PUSHING PRESSURE
OUTSIDE DIAMETER
LENGTH
WEIGHT
ЦКОД -245 ОТТМ
ЦКОД-245 БТС
ОТТМ-245
БТС-245
150 atm
10…15 atm
270 mm
380 mm
43,5 кг
ЦКОД -324 ОТТМ
ОТТМ-324
150 atm
10…15 atm
351 mm
350 mm
78,5 kg
71
WELL CEMENTING HARDWARE
T R A D E
ТЕХНОЛОГИЧЕСКОЕ ОБОРУДОВАНИЕ И ОСНАСТКА
H O U S E
CASING SHOES
Casing shoes are made to avoid damage of lower casing end while running in the hole. A guiding
shoe plug (drill-out part) is made of cloth laminate for easier drill out. A shoe design is simple,
practical and reliable during casing string run. It excludes any possibility of metal entry during the
future well deepening.
DESIGNATION
CONNECTION TYPE
БКП-146 ОТТМ
БКП-146 БТС
ОТТМ-146
БАТРЕСС-146
OUTSIDE DIAMETER
166 mm
LENGTH
295 mm
WEIGHT
16 kg
DESIGNATION
CONNECTION TYPE
TOP CEMENTING PLUGS
Top cementing plugs are used during cementing (backfill) operations in the
well for separating backfill mud from displacement fluid, that circulate in
the casing string, cleaning the internal surface of the casing pipe from the
cement mud left and also for receiving a signal of cementing process end
(stop).
ПВЦ-146
SLEEVE DIAMETER
БКП-168 ОТТМ
БКП-168 БТС
ОТТМ-168
БАТРЕСС-168
OUTSIDE DIAMETER
188 mm
LENGTH
340 mm
WEIGHT
17 kg
PLUG HEIGHT
CONNECTION TYPE
80 mm
TIP HEIGHT
20 mm
WEIGHT
2 kg
ПВЦ-168
БКП-178 ОТТМ
БКП-178 БТС
ОТТМ-178
БАТРЕСС-178
PLUG HEIGHT
157+3 mm
220 mm
BORE DIAMETER OF THE TIP
80 mm
198 mm
TIP HEIGHT
20 mm
LENGTH
365 mm
WEIGHT
2,8 kg
WEIGHT
19 kg
OUTSIDE DIAMETER
DESIGNATION
CONNECTION TYPE
ПВП-178
БКП-245 ОТТМ
БКП-245 БТС
ОТТМ-245
БАТРЕСС-245
OUTSIDE DIAMETER
270 mm
LENGTH
395 mm
WEIGHT
23 kg
DESIGNATION
72
215 mm
BORE DIAMETER OF THE TIP
SLEEVE DIAMETER
DESIGNATION
140+3 mm
БКП-324 ОТТМ
CONNECTION TYPE
ОТТМ-324
OUTSIDE DIAMETER
SLEEVE DIAMETER
PLUG HEIGHT
170+3 mm
280 mm
BORE DIAMETER OF THE TIP
88 mm
TIP HEIGHT
35 mm
WEIGHT
3 kg
ПВЦ-245
SLEEVE DIAMETER
230+3 mm
PLUG HEIGHT
320 mm
346 mm
BORE DIAMETER OF THE TIP
177 mm
LENGTH
340 mm
TIP HEIGHT
WEIGHT
54 kg
WEIGHT
50 mm
7 kg
73
WELL CEMENTING HARDWARE
T R A D E
ТЕХНОЛОГИЧЕСКОЕ ОБОРУДОВАНИЕ И ОСНАСТКА
H O U S E
BYPASS VALVES
ПК-172
A bypass valve is used for mud discharge from drill pipes during pulling-out of drill string with
screw bottomhole motor and also for filling the drill string with water and drill muds during its
lowering.
CONNECTION THREAD
MAXIMUM AXIAL LOAD
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
FLOW PART DIAMETER
LENGTH
WEIGHT
ПК-95
CONNECTION TYPE
MAXIMUM AXIAL LOAD
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
FLOW PART DIAMETER
LENGTH
WEIGHT
3-76
national standard P 50864-96
70 t
150 atm
10 ± 5 atm
95 mm
18 mm
455 mm
22 kg
MAXIMUM AXIAL LOAD
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
FLOW PART DIAMETER
LENGTH
WEIGHT
3-88
national standard P 50864-96
100 t
150 atm
10 ± 5 atm
108 mm
18 mm
475 mm
30 kg
CONNECTION THREAD
MAXIMUM AXIAL LOAD
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
FLOW PART DIAMETER
LENGTH
WEIGHT
MAXIMUM AXIAL LOAD
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
FLOW PART DIAMETER
LENGTH
WEIGHT
3-88 or 3-101
national standard P 50864-96
100 t
150 atm
10 ± 5 atm
120 mm
25 mm
480 mm
38 kg
ПК-127
CONNECTION TYPE
MAXIMUM AXIAL LOAD
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
FLOW PART DIAMETER
LENGTH
WEIGHT
74
3-102
national standard P 50864-96
100 t
150 atm
10 ± 5 atm
127 mm
25 mm
435 mm
30 kg
З-133
national standard Р 50864-96
180 t
150 atm
10 ± 5 atm
180 mm
40 mm
575 mm
76 kg
ПК-195
CONNECTION THREAD
MAXIMUM AXIAL LOAD
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
FLOW PART DIAMETER
LENGTH
WEIGHT
ПК-120
CONNECTION TYPE
З-147
national standard Р 50864-96
180 t
150 atm
10 ± 5 atm
172 mm
36 mm
620 mm
95 kg
ПК-178
ПК-108
CONNECTION TYPE
DOWN HOLE MOTOR VALVES
T R A D E
З-147
national standard Р 50864-96
180 t
150 atm
10 ± 5 atm
195 mm
70 mm
845 mm
103 kg
ПК-240
CONNECTION THREAD
MAXIMUM AXIAL LOAD
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
FLOW PART DIAMETER
LENGTH
WEIGHT
З-171
national standard Р 50864-96
180 t
150 atm
10 ± 5 atm
203 mm
80 mm
845 mm
106 kg
75
ТЕХНОЛОГИЧЕСКОЕ ОБОРУДОВАНИЕ И ОСНАСТКА
H O U S E
STOP BALL COCKS
DOWN HOLE MOTOR REVERSE VALVES Y-CODE
A reverse Y-CODE valve is used together with the down hole motor while drilling oil and gas wells
to prevent the motor from sludging-up.
SPECIAL FEATURES:
• A ball-and-seat is manufactured from tungsten carbide to prolong valve life;
• An individual adjustment of the ball-and-seat ensures the valve is sealed;
• A spring undergoes a chemical heat treatment for protection from washout;
• Valve design allows to perform its maintenance in field conditions.
Stop ball cocks are used for pipe channel overlap of drill pipes in order to prevent shows of gas,
oil and water and wild gushers or in the process of their elimination while drilling oil and gas wells.
КЗШ-114-50-21
OUTSIDE DIAMETER
PASS DIAMETER
MAXIMUM OPERATING PRESSURE
MAXIMUM AXIAL LOAD
MAXIMUM LOAD ON THE SWITCH
DURING COCK OPENING UNDER
THE PRESSURE OF 100 ATM
CONNECTION TYPE
У-КОД-95
CONNECTION TYPE
EFFICIENT RATE
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
LENGTH
З-76
12 HP
300 atm
3 atm
95 mm
95 mm
У-КОД-120
CONNECTION TYPE
EFFICIENT RATE
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
LENGTH
EFFICIENT RATE
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
LENGTH
З-102
22 HP
300 atm
3 atm
120 mm
370 mm
EFFICIENT RATE
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
LENGTH
76
EFFICIENT RATE
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
LENGTH
CONNECTION TYPE
EFFICIENT RATE
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
LENGTH
WEIGHT
З-88
15 HP
300 atm
3 atm
106 mm
340 mm
3-86
780 mm
48 kg
КЗШ-165-60-35
OUTSIDE DIAMETER
PASS DIAMETER
ATM
З-102
22 HP
300 atm
3 atm
127 mm
370 mm
50 kg
MAXIMUM OPERATING PRESSURE
MAXIMUM AXIAL LOAD
MAXIMUM LOAD ON THE SWITCH
DURING COCK OPENING UNDER
THE PRESSURE OF 100 ATM
CONNECTION TYPE
LENGTH
WEIGHT
165 mm
60 mm
350 atm
180 t
50 kg
3-133
610 mm
74 kg
У-КОД-176
З-102
38-40 HP
300 atm
3 атм
172 mm
410 mm
У-КОД-195
CONNECTION TYPE
CONNECTION TYPE
У-КОД-127
У-КОД-172
CONNECTION TYPE
LENGTH
У-КОД-106
114 mm
46 mm
210 atm
87 t
CONNECTION TYPE
EFFICIENT RATE
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
LENGTH
З-133
38-40 HP
300 atm
3 atm
176 mm
410 mm
У-КОД-240
З-147
40-42 HP
300 atm
3 atm
195 mm
460 mm
CONNECTION TYPE
EFFICIENT RATE
MAXIMAL PRESSURE
OPERATING PRESSURE
OUTSIDE DIAMETER
LENGTH
З-171
50-55 HP
300 atm
3 atm
203 mm
520 mm
КЗШ-178МА
OUTSIDE DIAMETER
PASS DIAMETER
MAXIMUM OPERATING PRESSURE
MAXIMUM AXIAL LOAD
MAXIMUM LOAD ON THE SWITCH
DURING COCK OPENING UNDER
THE PRESSURE OF 100 ATM
CONNECTION TYPE
LENGTH
WEIGHT
178 mm
80 mm
350 atm
276 t
50 kg
3-147
490 mm
55 kg
77
DOWN HOLE MOTOR VALVES
T R A D E
T R A D E
H O U S E
HYDRAULICS JET DISPERSER DGC-40-20
Hydraulics jet disperser is used for solid phase grinding
and for liquid phase emulsification by means of hydraulics
«stream into stream» effect of drill and cementing muds and
special– purpose liquids during their preparation and treatment while constructing and doing workover operations of oil
and gas wells.
Its use allows to considerably reduce materials consumption
while preparing, treating and weighting drill muds and to increase well casing quality.
Design features:
• High efficiency of operation by means of optimal distance
ratio between nozzles and operating chamber volume;
• Original unit design increases its reliability and life;
• Simplicity of operation and technical service;
• A possibility of immediate regulation of efficiency rate and
downstream pressure;
• Small overall dimensions and light weight.
MAXIMAL OPERATING PRESSURE
EFFICIENT RATE
NOZZELS
WEIGHT
78
20 mPa
50-100 m3/h
9; 12; 16 mm
45 kg
T R A D E
H O U S E
Office 11, 82 Nekrasovskaya st.,
Samara, Russia, 443020
Tel/Fax: 8 846 277 72 03; 8 846 277 72 04
Email: [email protected]

Download Report