Zip Us In product info Single Zip Slider Panel Pack Pack contains: Zip Us In panel with a single slider zip Adapter for a single slider YKK metal zip Adapter for a single slider YKK coil zip Single Panel 66cm in length, 13cm wide at the lower end and 28cm wide at the top. Two layers of black polyester 3 layer water resistant breathable performance softshell (fabric must be the same as its been tested for a tog rating). 66cm YKK 5VS single slider seperating zip with flip over pull slider in black. 2 (#20) Kam fastners in a very specific position on each side of the panel. 2 elastic pull cords with toggle and stopper. Reinforced button hole to pull the toggle through to make the panel reversible. Single Metal Adapter (forms a connection between the panel and a jacket with a metal zip) YKK 5VS 66cm single slider zip with flip over slider as inserted in the panel attached too a thin piece of water resistant fabric or binding, then attached to a YKK single slider metal zip - RAOR-58 DU (the thiner the width the better and I am flexible on the fabric as long as its water resistant) Single Coil Adapter (forms a connection between the panel and a jacket with a coil zip) YKK 5VS 66cm single slider zip with flip over slider as inserted in the panel attached too a thin piece of water resistant fabric or binding, then attached to a YKK single slider coil zip - CIFOL (the thiner the width the better and I am flexible on the fabric as long as its water resistant) Picture of adapter shows a double slider coil Double Zip Slider Panel Pack Pack contains: Zip Us In panel with a double slider zip Adapter for a double slider YKK metal zip Adapter for a double slider YKK coil zip Double Panel 66cm in length, 13cm wide at the lower end and 28cm wide at the top. Two layers of black polyester 3 layer water resistant breathable performance softshell (fabric must be the same as its been tested for a tog rating). 66cm YKK 5VS double slider seperating zip with standard puller on the bottom and a flip over pull slider on top, in black. 2 (#20) Kam fastners in a very specific position on each side of the panel. 2 elastic pull cords with toggle and stopper. Reinforced button hole to pull the toggle through to make the panel reversible. Double Metal Adapter (forms a connection between the panel and a jacket with a metal zip) YKK 5VS 66cm double slider zip with flip over slider as inserted in the panel attached too a thin piece of water resistant fabric or binding, then attached to a YKK double slider metal zip with standard puller on the bottom and a flip over pull slider on top, - RAOR-58 DU (the thiner the width the better and I am flexible on the fabric as long as its water resistant) Double Coil Adapter (forms a connection between the panel and a jacket with a coil zip) YKK 5VS 66cm double slider zip with standard puller on the bottom and a flip over pull slider on top, as inserted in the panel attached too a thin piece of water resistant fabric or binding, then attached to a YKK double slider coil zip with standard puller on the bottom and a flip over pull slider on top, CIFOL (the thiner the width the better and I am flexible on the fabric as long as its water resistant) Hood Double layer of water resistant soft shell fabric stitched with water proof thread. Attaches to the panel with KAM fasterners (no.20) black. For full details and more pictures see www.zipusin.co.uk Packaging Moudled plastic blister pack. 28cm wide, 21cm high with a 5cm dip in the middle for hanger. Printed card insert. Top of heart shape cut from the central clear plastic for the product to be touched.