Download Presentation

GasGuard Nozzles
Elaflex Latin América
·
Safety and Reliability!
• Over 27 years of experience in the Autogas industry,
• One of the safest and most reliable nozzles in the world market,
• Global leader in many International markets.
− These markets include Canada, USA, Mexico, Chile, China, Hong
Kong, Thailand, Indonesia, India, Australia, Germany and the UK.
• The ACME range of GasGuard nozzles has been UL listed for over 20
years.
2
·
Moving forward
LG1DN Nozzle
LG1E Nozzle
LG20 Nozzle
LG50 Nozzle
GG1DN Nozzle
GG1E Nozzle
GG20 Nozzle
ZVG2 DISH Nozzle
Phase out of LG style nozzles, upgrade to GG
From January 2015, the “LG” range of nozzles will be discontinued due to
the performance of the more popular “GG” range. LG equipment will continue
to stock and supply spare parts (except nozzles bodies) for the LG range up
until 31st December 2019 in order to support any scheduled maintenance of
LG nozzles. No LG nozzles would be sold after December 2014.
3
·
The New GG Range
Some advantages of the GG range of nozzles are:
• Better performance features Easier to use
− Single handed Lever Latch operation (when fitted)
− Very small losses on disconnect
− Improved flow rate up to 65 L/min
− Lower lever pressure
•
•
•
•
•
•
•
4
LG1DN same price as GG1DN
All nozzles fitted with strainer EK172.1
Safer and more reliable
Lighter and better balance
Operating temperature range: -40°c to 110°C
More robust construction = longer life time,
Longer maintenance periods
·
The GG Nozzle Range
GG1E
5
GG1EH
GG1DN
GG20
GG20H
GG20DN
GG30 - Bayonet
GG50 - DISH
GG10 – High Flow
·
Improvements to the GG Range
ACME Thread Guide
All Gasguard nozzles for use in Autogas
and light duty transfers will be fitted with
the new guided connectors. This will assist
the user, in safely connecting the nozzle to
the vehicle or fill point.
Nozzle Body with Magnet
All GG nozzles come with an optional
magnet assembly located in the nozzle
body. Used for reed switch dispenser
systems.
6
·
Improvements to the GG Range
Unified Nozzle Boot (holster)
GasGuard now includes the NB-GG
nozzle boot to its range. This nozzle boot
is capable of housing every nozzle in the
GG range (excluding GG10). It is also
designed for use with reed switch
dispenser systems.
GG1EH
Same modular components as GG1E,
however it has a new H (hybrid) nose
piece:
• Lower lever force
• Reduced discharge volume
7
·
Improvements to the GG Range
GG30 Bayonet Nozzle Development
• Nose assembly; Reduces the released
volume by 23%.
• New lip seal; Reduces the push on and
pull off force. Nozzle is easier to use.
• New 4-slot design; Makes it easier for
customers to connect the nozzle.
• Red anodized Lever Latch; Reduces the
chance of misusing the nozzle.
• Stickers; Also assist users in operating
the nozzle
• Magnet in Nozzle Body; come with
optional Magnet Assembly for dispensers
using reed switches
• Splashguard; Protects the customer’s
hands against any normal gas release.
8
·
Nozzle Maintenance
ELAFLEX provides maintenance training for all of our GasGuard and
ZVG2 range of refuelling nozzles. We have numerous certified repair
partners around the globe to ensure that our nozzles are repaired,
maintained and re-used by trained technicians.
ELAFLEX makes a serious
commitment to maintenance on
nozzles. This allows us to
extend the working life of the
nozzle whilst ensuring safety,
reliability and performance. The
allows our customers to
appreciate the total cost of
ownership our nozzles provide,
which is seen in our success
across the globe.
9
·
Who uses it?
ELAFLEX GasGuard Customers
10
·
Why to select it?
A small investment, a differential qualitative leap
High-quality components
Clean, modern lines, reliable
Superior end-user experience
Long life cycle
Minimum maintenance
Continual support over the life of the nozzle
11
·
Safety
Easy and safe to operate
Cannot discharge LPG to atmosphere.
Must be connected to allow product to flow.
Patented Pressurised Dual Nose Piece which provides a complete seal
with the filler valve, even when the nozzle is not fully screw connected
(only on “DN” nozzles).
Nozzles are approved and designed in accordance with current EU
directives
All ACME nozzles are listed with Underwriters Laboratories (UL)
12
·
Technical Assistance
Technical assistance
Training material
Ensuring available spare parts
•Factory repair/overhaul
•Refurbishment
•Exchange of components
•Hardware upgrades
13
·
Complete line of products
ZVG 2 LPG NOZZLES
14
Standard Hose for L. P. Gas Dispensers
·
“LPG 16”
Standard Hose for L. P. Gas
Dispensers
The standard Auto gas hose.
Free of Plasticisers
Highest Cold Flexibility
Robust and Durable
Size DN 16 mm, PN 25, test pressure 40 bar, burst
pressure > 100bar. Temperature range -40°C up to
+70°C.
Tube of NBR black, electrically conductive, Low tensile textile
braids with crossed copper threads. Cover of CR black,
perforated,
electrically conductive, highly flame and abrasion resistant,
highly ozone- UV and ageing resistant.
Good Looks, no need for ugly reducing, nipples and additional sealing.
15
·
“ARK 19”
16
·
“Swivel”
Improved easy rotating action
17
·
“ZVG 2”
• LPG nozzle for vehicle refuelling with liquefied
petroleum gas (propane, butane + mixtures)
• Up to 50 l / min.
• Working pressure 25 bar. Test pressure 40 bar.
Burst
• pressure > 100 bar.
• Temperature range - 25°up to +70°Celsius,
'LT'-Type down to - 40°Celsius.
• Safety features: The nozzle only allows gas to
flow
• when it is correctly coupled. No opening
possible when coupled misaligned / tilted.
• The discharge volume of gas when uncoupling
is minimal, direction of dischargeturned away
from the user
Lightweight and more user-friendly
18
·
GG10 – High Flow Nozzle
• filling of small to medium LPGas storage tanks
− e.g. forecourt, light trucks, household and remote storage tanks
• intrinsically safe operation
• ACME 1¾'' thread connection
• UL listed
• optional strainer (new)
• up to 380 l/min
45°swivel
• integrated 360°swivel
• gas release volume 11 cm³
• Standard low temperature seals -40 °C
•
360°swivel function
•
Two axis of rotation
•
Easier handling
•
Removes hose kinking
•
New stronger ·plating
GG11 – Safety Back-Check Valves
• Used to contain leaks at storage tank filling point, allows
driver to move to next fill point without delay
• GG11R: with external pressure release screw
• GG11: without external pressure release screw
• intrinsically safe operation when used with the GG10
• pending UL listing
• ACME 1¾'' thread connection
• minimal pressure drop
• gas release volume 23 cm³
• Standard low temperature seals -40 °C
·
“Other LPG”
21
·
LG1DN & GG1DN Nozzles
•
•
•
•
•
•
•
•
Connection type: 1 ¾" ACME
Service: unattended sites
Weight: 2.2kg
Flow rate: Up to 55 L/min
Discharge Volume: 1.6cm³
Easy operation: Two handed (one hand without latch)
Safety: Must be connected to allow product to flow
Patented Dual Nose Piece
•
•
•
•
•
•
•
•
•
•
•
•
•
Connection type: 1 ¾" ACME
Service: Unattended sites
Weight: 1.8kg
Flow rate: Up to 60 L/min
Easy operation: One handed
Discharge Volume: 1.5cm³
Lever hold open force reduced by 25%
Safety: Must be connected to allow product to flow
Patented Dual Nose Piece
Guided ACME thread, reduce chance of cross-threading
Robust stainless steel components
Magnet option in Nozzle Body
·
Lower maintenance costs
LG1DN Nozzle
GG1DN Nozzle
22
23
·
LG1E & GG1E Nozzles
•
•
•
•
•
•
•
•
Connection type: 1 ¾" ACME
Service: Attended sites
Weight: 2.1kg
Flow rate: Up to 63 L/min
Discharge Volume: 1.8cm³
Easy operation: Two handed (one hand without latch)
Safety: Must be connected to allow product to flow
Will seal to tank even when fill point gasket is missing
•
•
•
•
•
•
•
•
•
•
•
•
•
Connection type: 1 ¾" ACME
Service: Attended sites
Weight: 1.75kg
Flow rate: Up to 68 L/min
Easy operation: One handed
Discharge Volume: 1.8cm³
Lever hold open force reduced by 25%
Safety: Must be connected to allow product to flow
Will seal to tank even when fill point gasket is missing
Robust stainless steel components
Magnet option in Nozzle Body
Lower maintenance costs
·
Guided ACME thread, reduce chance of
cross-threading
LG1E Nozzle
GG1E Nozzle
24
25
·
LG30 & GG30 Nozzles
•
•
•
•
•
•
•
•
Connection type: Bayonet
Service: unattended sites
Weight: 2.2kg
Flow rate: Up to 53 L/min
Discharge Volume: 1.2cm³ (nozzle only)
Easy operation: Two handed (one hand without latch)
Safety: Must be connected to allow product to flow
Dual Nose Piece, creates positive seal even when the
nozzle is not fully screw connected.
•
•
•
•
•
•
•
•
•
•
•
•
•
Connection type: Bayonet
Weight: 1.9kg
Flow rate: Up to 58 L/min
Easy operation: One handed
Discharge Volume: 1.2cm³ (nozzle only)
23% reduction in nozzle/fillpoint discharge volume
Lower lever hold open force
Safety: Must be connected to allow product to flow
Dual Nose Piece
4-slot Bayonet insert for easy use
Robust stainless steel components
Magnet option in Nozzle Body
·
Lower maintenance costs
LG30 Nozzle
GG30 Nozzle
26
27
·
NEW GG1EH Nozzle
GG1EH Nozzle
28
•
•
•
•
•
•
•
•
•
•
•
Connection type: 1 ¾" ACME
Weight: 1.75kg
Flow rate: Up to 65 L/min
Easy operation: Two handed (one hand without latch)
Discharge Volume: 1.5cm³
Lower lever hold open force
Safety: Must be connected to allow product to flow
Will seal to tank even when fill point gasket is missing
Magnet option in Nozzle Body
Lower maintenance costs
Guided ACME thread, reduce chance of cross-threading
·

Download Report