Electro-mechanical Assembly Press

Electro-mechanical Assembly Press
UFM Classic 150-400-145
Art. Nr.: 374151VPM
MAIN FUNCTIONS
Nominal load (push / pull)
Stroke
Nominal speed
Acceleration
Dwell time of nominal load
Weight mechanics
Max. tool weight *
Force
Measuring principle
System accuracy **
Amplifier PDM-S / (WxHxD)
Output signal
Protection class
Power supply
DISTANCE MEASURING
150 / 150 kN
400 mm
145 mm/s
1000 mm/s2
Min. 4 s
14 kg
90 kg
Strain gauge
<1% with 2-point-calibration / <0,3% with characteristic map
Aluminum die-cast (125x80x57mm)
digital
IP 40
19 - 36 VDC, (3W)
Encoder systeme
Repeatability of positioning ***
SERVO AMPLIFIER
Type
Dimensions (WxHxD)
Mains voltage
Cable cross section (input)
Cable cross section (output)
Protection class
Weight
Recommended protection
Temperature range
Power loss
MAINS FILTER
Resolver
< 0,01 mm
Weight
Cable cross section input (max.)
Power loss
Dimensions (WxHxD)
Protection class
PC INTERFACE
SPS SCHNITTSTELLE (24 VDC)
EXTENSION OPTIONS
PROMESS-BUS
PLC FIELDBUS INTERFACE
6,7 kg
10 mm² / 6 AWG
54 W
210 x 434 x 60 mm
IP 20
Ethernet
3I / 4O
M702-064 00350 A
210x391x227 mm
3 AC 380 V … 480 V, +/-10 %
IEC 10 mm² / UL 6 AWG
IEC 10 mm² / UL 6 AWG
IP 20
14 kg
IEC 63 A gR / UL/USA 40 HSJ or DFJ
-20°C…+50°C
532W
PDM-A: 4x Analogue | PDM-P: Piezo | PDM-I/O: 16I / 16O
Profibus, Profinet, EtherCat, EtherNet/IP, Modbus/TCP
* if using a holding break: max. permitted tool weight = 10% nominal load. For a heavier tool weight please consult PROMESS
** Force measuring system, static calibration / *** at thermal steady-state
PROMESS Gesellschaft für Montage- und Prüfsysteme mbH
Nunsdorfer Ring 29
Fax: +49/30/62 88 72 59
D - 12277 Berlin
e-mail: [email protected]
Tel.: +49/30/62 88 72 0
web: www.promessmontage.de
All specifications in the data sheets are valid at the print date.
Before basing your own calculations/usage on the listed information,
please inform yourself whether the information at your disposal is upto-date. We do not accept any liability for correctness of the
information. Jun-16
PROMESS Gesellschaft für Montage- und Prüfsysteme mbH
Nunsdorfer Ring 29
Fax: +49/30/62 88 72 59
D - 12277 Berlin
e-mail: [email protected]
Tel.: +49/30/62 88 72 0
web: www.promessmontage.de
All specifications in the data sheets are valid at the print date.
Before basing your own calculations/usage on the listed information,
please inform yourself whether the information at your disposal is upto-date. We do not accept any liability for correctness of the
information. Jun-16