Street lighting luminaire

Street lighting luminaire
KAOS
Registered model
NERO e GRIGIO per marchi piccoli
(ha il filo ingrossato)
Kaos is available in a wide range of solutions, capable
of meeting all the vehicular traffic and residential street illumination
requirements.
Kaos is available in two sizes, with four different types of optics,
and two cover alternatives, die cast aluminium and technopolymer.
Kaos 1 for SHP and MHL lamps up to 150W and CPO lamps
up to 140W*.
Kaos 2 for SHP and MHL lamps up to 400W and CPO lamps
up to 140W*.
NERO e GRIGIO per marchi piccoli
(ha il filo ingrossato)
*All the maximum powers shown are for ST optics.
KAOS | TECHNICAL DATA SHEET | 2
KAOS
MECHANICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
1 Support frame in die cast aluminum alloy UNI EN 1706, RAL 7035.
• Insulation class: I, II.
2 Top cover in technopolymer or die cast aluminum alloy UNI EN 1706 , RAL 7021.
• Ferromagnetic power supply unit, efficiency EEI = A3.
3 EPDM or silicone seal.
4 Closure screen in flat tempered glass (4mm thickness) featured by high transparency and optimum thermal and mechanical resistance (IK09).
• Available dimming options:
• Integrated on-load switch for luminaries in class II.
• Power supply: 230V - 50Hz.
• Anti-burst capacitor.
• Ceramic lamp holder.
• Superimposed pulse ignotor with timer upon request.
• Power factor: > 0.9 (at full load).
• Wire connection for cables featured by a maximum cross section of 4mmq.
9
5 Optical unit in pure anodized and polished aluminum (99.85%).
2
6 Technopolymer gear plate removable without tools.
3
7 Membrane grommet.
8 Fixing system in die cast aluminum alloy UNI EN 1706.
5
9 Stainless steel lock and spring.
10 Regulation of the lamp focus in 6 different positions.
IP66 protection degree.
1
10
4
6
8
7
NERO e GRIGIO per marchi piccoli
(ha il filo ingrossato)
KAOS | TECHNICAL DATA SHEET | 3
211
Available versions
Ø 60/76
KAOS 1
KAOS 2
692
692
228 228
211 211
626
626
Ø 60/76
Ø 60/76
408
379
228
692
Ø 60/76
626
WATTAGES
50 W
70 W
100 W
150 W
692
LAMP TYPE
SHP-T
SHP-T
SHP-T
SHP-T
KAOS 1
LAMP HOLDER
E27
E27
E40
E40
OPTIC
ST
ST
ST
ST
50 W
70 W
100 W
150 W
MHL-E
MHL-E
MHL-E
MHL-E
E27
E27
E27
E27
ST
ST
ST
ST
45 W
60 W
90 W
140 W
CPO-TW*
CPO-TW*
CPO-TW*
CPO-TW*
PGZ12
PGZ12
PGZ12
PGZ12
ST
ST
ST
ST
50 W
70 W
100 W
150 W
CDO-TT
CDO-TT
CDO-TT
CDO-TT
E27
E27
E40
E40
ST
ST
ST
ST
WATTAGES
150 W
250 W
400 W
LAMP TYPE
SHP-T
SHP-T
SHP-T
KAOS 2
LAMP HOLDER
E40
E40
E40
OPTIC
ST
ST
ST
150 W
250 W
MHL-E
MHL-E
E27
E40
ST
ST
250 W
400 W
MHL-T
MHL-T
E27
E40
ST
ST
140 W
CPO-TW*
PGZ12
ST
150 W
250 W
Cdo-tt
Cdo-tt
E27
E40
ST
ST
For CDO-TT lamps, please, order SHP wiring.
*Only available with electronic power supply unit.
For CDO-TT lamps, please, order SHP wiring.
*Only available with electronic power supply unit.
NERO e GRIGIO per marchi piccoli
(ha il filo ingrossato)
KAOS | TECHNICAL DATA SHEET | 4
KAOS optic
AVAILABLE OPTICS
ST: asymmetrical optic for
street lighting.
OC: asymmetrical optic for
pedestrian and cycle paths
lighting.
OP-DX: Right asymmetrical
optic for pedestrian crossings
ST
250W SHP-T
Gamma Angles 180
105
120
60
105
90
75
60
90
60
75
120
60
180
45
45
240
300
cd/klm
KAOS
30
15
0
15
30
Coordinate system C-Gamma, polar graph.
Street lighting
lighting.
OP-SX: Left asymmetrical
optic for pedestrian crossings
lighting.
In the street version (ST) it is
possible to adjust the lamp
focus placing the reflector
in different positions. This
allows to vary the photometric
asymmetry in order to
optimize the light beam
according to the road width.
Please, download
Kaos photometric data at
www.aecilluminazione.com
NERO e GRIGIO per marchi piccoli
(ha il filo ingrossato)
KAOS | TECHNICAL DATA SHEET | 5
K aos - B r a c k e t s
768
Ø 60
155
Ø 102
MK/K BRACKET
1592
768
Bracket in hot-dip galvanized
155
Ø 89/102
Ø 60
steel tubular Ø 60mm.
Ø 102
stainless steel AISI 316.
Ø 102
Cable rod support ring for
Ø 60
Double top cable rod in
913
Ø89/102mm in hot-dip
2091
galvanized steel.
1592
Ø 89/102
Fixing system in hot-dip
Ø 89/102
galvanized steel for PK - PN PA - EC poles Ø 102mm.
Ø 60
Ø 60
Ø 102
Ø 102
Stainless steel screws.
1412
Projection: 155mm - 913mm -
913
1412mm.
Compositions:
- Groups of 1-2-3 brackets.
MK/K
MODEL
COLOUR
STANDARD
COMPOSITIONS
MK-K 1.02
MK-K 1.10
MK-K 1.15
MK-K 2.02
MK-K 2.10
MK-K 2.15
MK-K 3.02
MK-K 3.10
MK-K 3.15
NERO e GRIGIO per marchi piccoli
(ha il filo ingrossato)
GRAPHITE (CODE 01)
KAOS | TECHNICAL DATA SHEET | 6
K aos - B r a c k e t s
1560
947
Ø 60/70
MB/K BRACKET
1525
Ø 60
Bracket in in hot-dip
galvanized steel tubular Ø
60mm with decorative cover
912
in moulded aluminium.
Ø 60/70
Post top mounting system for
poles Ø 60 - 70mm.
Device inserction: Ø 60mm.
Stainless steel screws.
Projection: 912mm
Compositions:
- Groups of 1-2-3 brackets.
MB/K
MODELLO
COLOUR STANDARD
housing and
BRACKETS
fairing
COMPOSITIONS
MB-K 1.10
MB-K 2.10
MB-K 3.10
RAL 7035 (CODE 05)
RAL 7021 (CODE 06)
NERO e GRIGIO per marchi piccoli
(ha il filo ingrossato)
KAOS | TECHNICAL DATA SHEET | 7
Installation examples
For more information about AEC Pole Division poles, please, consult the catalogue “The Best in Pole Design”.
NERO e GRIGIO per marchi piccoli
(ha il filo ingrossato)
PK
PK
PK
KAOS | TECHNICAL DATA SHEET | 8
NERO e GRIGIO per marchi piccoli
(ha il filo ingrossato)
The information contained in this
catalogue aren’t binding.
In order to guarantee a continuos
updating of its products,
AEC reserves itself the right to modify
the contents without notice.
AEC Illuminazione Srl
I-52010 Subbiano - Arezzo - Italy
Via Righi, 4 - Zona Industriale Castelnuovo
Tel. +39 0575 041110
Fax +39 0575 420878
[email protected]
www.aecilluminazione.com

Download Report