Anschlussformen nach Output drives according to EN ISO 5210 DIN 3210 AUMA Stirnradgetriebe Typ AUMA spur gearbox type Anschlussformen output drives Maße dimensions Gewindebuchse stem nut EN ISO DIN 5210 3210 Ø d5 GSTN 25.1 GSTN 30.1 F 25 F 30 Fmax kN ∅ d1 L g Form / type EN ISO 5210 A DIN 3210 A ∅ d2 f8 h >h h3 Ø d6 L1 >h h3 d7 b L1 ≥h h3 b d10 dy 230 180 260 300 298 300 356 406 175 g 100 125 185 225 h 5 5 5 8 h3 20 25 38 45 L 95 118 175 210 Z 8 8 8 8 35 56 125 200 28 32 40 45 100 120 160 180 75 90 120 140 kg 1) H9 h3 25 32 48 58 L1 110 130 180 200 t 1) 106,4 127,4 168,1 189,1 – – – – 14 18 22 28 50 60 80 100 75 90 120 140 h3 25 32 48 58 L1 110 130 180 200 t kg 1) H9 1) kg Fmax kN 53,8 64,4 85,4 106,4 5,1 8,6 21,2 27,5 200 325 700 800 ∅ d5 88 104 152 180 ∅ d6 max. 85 102 150 175 g 200 235 315 400 h2 21 25 28 38 L 126 155 210 258 54 90 180 320 h h2 h3 L g 160 155 Gewicht weight Form / type AF 475 115 ∅ dy max. Ø d5 415 95 ∅ d10 Federgelagerte Gewindebuchse spring loaded stem nut 350 180 b JS 9 Fehlende Masse siehe Form A missing dimensions refer to output drive A 300 160 Gewicht weight t 1100 120 ∅ d7 min. Bohrung mit Nut bore with keyway 700 100 ∅ d7 Fehlende Masse siehe Form A missing dimensions refer to output drive A 325 M 36 b JS 9 t F 40 M 30 Gewicht weight Form / type EN ISO 5210 B 1 = Ø d7 EN ISO 5210 B 2 < Ø d7 > Ød7 min. DIN 3210 B = Ø d7 F 35 M 20 ∅ d6 max. Steckbuchse plug sleeve GSTN 40.1 M 16 ∅ d5 Anordnung der Schraubenlöcher d4 arrangement of holes d4 G5 GSTN 35.1 200 254 d4 Ø d1 G4 200 ∅ d3 Ø d2 Ø d3 Z x d4 Form / type EN ISO 5210 B 3= Ø d10 EN ISO 5210 B 4≤ Ø dy DIN 3210 E = Ø d10 GSTN 25.1 - GSTN 40.1 Z x d4 Ø d6 Ø d2 Ø d3 Ø d1 Fehlende Maße siehe Form A missing dimensions refer to output drive A Gewicht weight kg 1) Maße abhängig von ∅ d7 / ∅ d10, siehe DIN 6885 T1 / Dimensions depend on ∅ d7 / ∅ d10, refer to DIN 6885 part 1 R Ausgabe Issue 1.05 Y000.549/001/de-en
© Copyright 2024 ExpyDoc