HPE 525 802.11ac Dual Radio Access Point Series

QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Overview
HPE 525 802.11ac Dual Radio Access Point Series
Models
HP 525 Wireless Dual Radio 802.11ac (AM) Access Point
HP 525 Wireless Dual Radio 802.11ac (WW) Access Point
HP 525 Wireless Dual Radio 802.11ac (JP) Access Point
HP 525 Wireless Dual Radio 802.11ac (IL) Access Point
HP 525 Wireless Dual Radio 802.11ac (AM) 8-unit Eco-pack Access Points
HP 525 Wireless Dual Radio 802.11ac (WW) 8-unit Eco-pack Access Points
JG993A
JG994A
JG995A
JG996A
JG997A
JG998A
Key features
•
•
•
•
•
Two-spatial stream 802.11ac MIMO Access Point with optional external antennas
Up to 867 Mbps on the 802.11ac radio and 300 Mbps on the 2.4 GHz 802.11n radio
Built-in spectral analysis scans the 2.4 GHz and 5 GHz bands to identify sources of RF interference
Comprehensive WLAN security with intrusion detection and prevention offers threat protection
Limited Lifetime Warranty
Introduction
HPE 525 802.11ac Dual Radio Access Point Series bring 867 Mbps performance, faster application processing, and increased range
to 802.11 clients over 802.11n access points. Ideal for dense client environments and high bandwidth applications, the access points
can be powered by Power over Ethernet (PoE) and offer full compatibility with legacy 802.11 clients and existing HP Unified
wireless controllers.
The access points provide Radio Frequency spectrum analysis with detection and classification of non-IEEE 802.11 interference and
has the ability to automatically avoid interference. Wireless security is comprehensive when operating with a controller; with
integrated wireless IDS/IPS, support for internal and external authentication, authorization, and accounting (AAA) servers; built-in
Page 1
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Overview
stateful firewall; per-user VLAN mapping; and authentication.
Features and benefits
Management
•
•
•
•
•
•
•
•
•
Wi-Fi Clear Connect
provides a system-wide approach to improving WLAN reliability by proactively determining and adjusting to changing RF
conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using
spectrum analysis capabilities built into the access points, identifying rogue activity, and making decisions at a systemwide level.
Advanced radio resource management
o Automatic radio power adjustments
include real-time power adjustments based on changing environmental conditions and signal coverage
adjustment
o Automatic radio channel
provides intelligent channel switching and real-time Interference detection
o Intelligent client load balancing
determines number of clients across neighboring APs and adjusts client allocation to balance the load
o Airtime fairness
provides equal RF transmission time for wireless clients
Spectrum analysis
o Power/frequency spectrum analysis
measures noise from IEEE 802.11 remote sources
o Signal detection/classification
identifies source of RF interference, for example, Bluetooth®, cordless phones, and microwave ovens
o Evaluation of channel quality
helps detect severe channel degradation and improve the reporting of poor RF performance
Integrated Wireless IDS/IPS
detects and locates and mitigates unknown and rogue devices (see controller datasheet for details))
Access point management via a wireless controller
provides secure web browser (SSL and VPN), command-line interface, SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS
Authentication Client MIB (RFC 2618); offers embedded HTML management tool with secure access (SSL and VPN);
implements scheduled configuration and firmware upgrades from a central controller
HPE Intelligent Management Center and Wireless Services Manager Software
provides central management for discovery, logging, status, and configuration management
Diagnostics
records association, authentication, and DHCP events in client event log; packet capture tool for Ethernet and IEEE 802.11
interfaces (PCAP format); includes data rate matrix
Compatible with HPE Unified Switches, Controllers and Module
o Refer to the HPE Access Point—Controller Compatibility Matrix at
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA5-0345ENW&cc=us&lc=en
o Refer to the release notes for minimum version numbers required.
Quality of Service (QoS)
•
•
•
Rate limiting
supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums
Centralized traffic
maintains Layer 2 and Layer 3 QoS settings when using centralized traffic or guest access
IEEE 802.1p prioritization
Page 2
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Overview
•
delivers data to devices based on the priority and type of traffic
Wireless
o L2/L3/L4 classification
supports IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ
o Multiple SSIDs per radio
Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority
Connectivity
•
•
IEEE 802.3 (PoE)
o simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost
involved in supplying local power at each access point location
o 802.3af the AP will operate with both radios at full performance
Auto-MDIX
adjusts automatically for straight-through or crossover cables on the Ethernet interface
Mobility
•
•
•
•
•
•
•
•
Two spatial stream MIMO technology
provides the latest in Wi-Fi technology, which allows for 867 Mbps in the 5GHz frequency band and 300 Mbps in the
2.4GHz band of signaling
Band steering
redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum
HPE 525 embedded antennas
provides excellent coverage through use of embedded high-gain antennas (4 dBi antenna at 2.4 GHz and 5 dBi antenna
at 5 GHz); no need for the added cost of external antennas
External antenna
o Optional external antenna for better antenna placement via RP-SMA connectors
Anywhere, anytime wireless coverage
dual-radio IEEE 802.11b/g/n and 802.11a/n/ac access point; per-radio software-selectable configuration of frequency
bands; self-healing, self-optimizing local mesh that extends network availability; Wi-Fi Alliance Certifications for
interoperability with all IEEE 802.11a/b/g/n/ac client devices
Medical standards
meets the European EN60601-1-2 standard for healthcare
Multiple SSIDs
o Up to 16 SSIDs per radio, each with unique MAC address, configurable SSID broadcasts
o Individual security and QoS profiles
o Configurable DTIM and minimum data rate
o Each mapped to separate IEEE 802.1Q VLANs
o WMM and/or WMM-PS
o Security filter
AP client access control functions
o offers IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP
o delivers MAC address authentication using local or RADIUS access lists
o provides RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2
o supports RADIUS Client (RFC 2865 and 2866) with location-aware support
o provides Layer 2 wireless client isolation
Security
Page 3
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Overview
•
•
•
•
Integrated IDS support
o Automated AP and client classification
reduces manual effort (administrator can override AP classification)
o Comprehensive detection capabilities
detects a wide range of attacks
o Flexible event reporting
enables configuration of which events will result in notifications
o Location tracking capabilities
helps identify the rogue device location
o Flexible deployment models
supports time slicing or dedicating a radio to detect full-time
o see the controller datasheet for more detail
Choice of IEEE 802.11i, WPA2, or WPA
locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced
Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless
traffic
TKIP/WEP encryption
is supported only on legacy IEEE 802.11a/b/g clients as it has been deprecated from the IEEE 802.11n and 802.11ac
standards
Local wireless bridge client traffic filtering
prevents communication between wireless devices associated with the same access point
Additional information
•
RFC and standards
refer to the controller datasheet for details
Warranty and support
•
•
Limited Lifetime Warranty
see http://www.hpe.com/networking/warrantysummary for warranty and support information included with your
product purchase.
Software releases
to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software
releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary
Page 4
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
HP 525 Wireless 802.11ac (AM) AP
• 2 RJ-45 autosensing 10/100/1000 port (only one supporting PoE)
JG993A
See Configuration
NOTE:1
HP 525 Wireless 802.11ac (WW) AP
• 2 RJ-45 autosensing 10/100/1000 port (only one supporting PoE)
JG994A
See Configuration
NOTE:2
HP 525 Wireless 802.11ac (JP) AP
• 2 RJ-45 autosensing 10/100/1000 port (only one supporting PoE)
JG995A
See Configuration
NOTE:3
HP 525 Wireless 802.11ac (IL) AP
• 2 RJ-45 autosensing 10/100/1000 port (only one supporting PoE)
JG996A
See Configuration
NOTE:4
HP 525 Wireless 802.11ac (AM) 8 Pack AP
• 2 RJ-45 autosensing 10/100/1000 port (only one supporting PoE) (Each)
JG997A
See Configuration
NOTE:1
HP 525 Wireless 802.11ac (WW) 8 Pack AP
• 2 RJ-45 autosensing 10/100/1000 port (only one supporting PoE) (Each)
JG998A
See Configuration
NOTE:2
Configuration Rules:
Note 1
Only available in AMS. (Warning in Clic only)
Note 2
Not available in AMS, Japan or Israel. (Warning in Clic only)
Note 3
Only available in Japan. (Warning in Clic only)
Note 4
Only available in Israel. (Warning in Clic only)
Access Point Options
External Power Supplies
HP 1-port Power Injector
J9407B
Page 5
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Configuration
See Configuration
NOTE:1, 2
HP Gigabit IntelliJack 48V Power Supply
JD055B
See Configuration
NOTE:1, 2
Configuration Rules:
Note 1
Note 2
This power supply is supported on the following Access Points:
HP 525 Wireless Dual Radio 802.11ac (AM) Access Point
HP 525 Wireless Dual Radio 802.11ac (WW) Access Point
HP 525 Wireless Dual Radio 802.11ac (JP) Access Point
HP 525 Wireless Dual Radio 802.11ac (IL) Access Point
HP 525 Wireless Dual Radio 802.11ac (AM) 8-unit Eco-pack Access Points
HP 525 Wireless Dual Radio 802.11ac (WW) 8-unit Eco-pack Access Points
JG993A
JG994A
JG995A
JG996A
JG997A
JG998A
Localization required. (See Localization Menu)
External Antenna
HP Indoor Omni 2.5/6dBi MIMO 4 Elmnt Ant
Note 1
This Antenna is supported on the following Access Points:
HP 525 Wireless Dual Radio 802.11ac (AM) Access Point
HP 525 Wireless Dual Radio 802.11ac (WW) Access Point
HP 525 Wireless Dual Radio 802.11ac (JP) Access Point
HP 525 Wireless Dual Radio 802.11ac (IL) Access Point
HP 525 Wireless Dual Radio 802.11ac (AM) 8-unit Eco-pack Access Points
HP 525 Wireless Dual Radio 802.11ac (WW) 8-unit Eco-pack Access Points
JG696A
See Configuration
NOTE:1
JG993A
JG994A
JG995A
JG996A
JG997A
JG998A
Page 6
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Technical Specifications
HP 525 Wireless Dual Radio 802.11ac (AM) Access Point
HP 525 Wireless Dual Radio 802.11ac (WW) Access Point
HP 525 Wireless Dual Radio 802.11ac (JP) Access Point
HP 525 Wireless Dual Radio 802.11ac (IL) Access Point
HP 525 Wireless Dual Radio 802.11ac (AM) 8-unit Eco-pack Access Points
HP 525 Wireless Dual Radio 802.11ac (WW) 8-unit Eco-pack Access Points
I/O ports and slots
Additional ports and
slots
AP characteristics
Physical characteristics
Memory and processor
JG993A
JG994A
JG995A
JG996A
JG997A
JG998A
1 RJ-45 autosensing 10/100/1000 PoE port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 RJ-45 serial console port
Radios (built-in)
802.11b/g/n, a/n/ac
Radio operation modes
Client access, Local mesh, Packet capture
AP operation modes
Controlled
Wi-Fi Alliance Certification a/b/g/n/ac Wi-Fi Certified
Antenna
(2) 4 dBi 2.4 GHz and (2) 5 dBi 5 GHz omnidirectional antennas
Number of internal antennas 4
Number of external
4
antennas
Dimensions
8.66(w) x 8.66(d) x 2.36(h) in (22 x 22 x 6 cm)
Weight
1.65 lb (0.75 kg) mounting bracket
Single core @ 720 MHz, 128 MB flash, 256 MB SDRAM
Mounting and enclosure Indoor, plenum rated; Includes ceiling/wall mount kit as well as two ceiling mounting clips
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Electrical characteristics Description
Maximum power rating
Notes
Frequency band and
Americas
Operating channels
European Union
32°F to 113°F (0°C to 45°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
IEEE 802.3af PoE compliant for Gigabit Ethernet
12.9 W
Optional 48V DC power supply
2.412 - 2.462 GHz (1 - 11 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)
Page 7
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Technical Specifications
Rest of World (Actual
channels designated by
selecting country in UI)
Safety
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
5.745 - 5.825 GHz (149 - 165 channels)
Taiwan
2.412 - 2.462 GHz (1 - 11 channels)
5.280 - 5.320 GHz (56 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)
Japan
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
Israel
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA
Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval
(Korea)
UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1
Medical
EN60601-1-2
RF Exposure
FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health
Safety Code 6; Australian Radiation Protection Std.
Dual radio: IEEE 802.11a/n/ac for very high-throughput applications and IEEE 802.11b/g/n for legacy
support applications
- Integrated antennas for both IEEE radios, supporting two spatial streams and 2x2 MIMO
- Four embedded antennas
- Both radios operate at full power and full performance on IEEE 802.3af PoE/Gigabit Ethernet
- External antenna, optional
EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B
Radio
Features
Emissions
Notes
Services
Supported data rates
• 802.11b: 1, 2, 5.5, 11 Mbps
• 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11n: 6.5 to 300 Mbps (MCS0 to MCS15, 1 and 2 spatial streams)
• 802.11ac: 6.5 Mbps to 866 Mbps (MCS0 to MCS9, 1 and 2 spatial streams)
• 802.11n high-throughput (HT) 20/40
• 802.11ac very high throughput (VHT) 20/40/80
• 802.11n/ac packet aggregation A-MPDU and A-MSDU
The HPE 525 access point power information listed includes the embedded antenna. Review the
Hewlett Packard Enterprise documentation for your AP to understand the maximum output setting
for your AP based on your country's regulations.
Two spatial stream AP, supporting 866 Mbps in the 5GHz band and 300 Mbps in the 2.4GHz band.
Maximum transmit power varies by country.
Regulatory model number: BJNGA-FB0004
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
Radio characteristics
HP 525 Wireless Dual Radio 802.11ac (AM) Access Point
HP 525 Wireless Dual Radio 802.11ac (WW) Access Point
JG993A
JG994A
Page 8
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Technical Specifications
HP 525 Wireless Dual Radio 802.11ac (JP) Access Point
JG995A
HP 525 Wireless Dual Radio 802.11ac (IL) Access Point
JG996A
HP 525 Wireless Dual Radio 802.11ac (AM) 8-unit Eco-pack Access Points
JG997A
HP 525 Wireless Dual Radio 802.11ac (WW) 8-unit Eco-pack Access Points
JG998A
NOTE: This transmit power data is EIRP and includes the embedded antennas. The receiver sensitivity also includes the antenna
gain.
IEEE 802.11ac 5GHz @
80MHz channel
Data rate
MCS9 - 866
Mbps
-64 dBm
22 dBm
MCS0 - 65
Mbps
-89 dBm
27 dBm
MCS9 - 400
Mbps
-67 dBm
22 dBm
MCS0 - 30
Mbps
-92 dBm
27 dBm
MCS15 - 300
Mbps
-72 dBm
24 dBm
MCS8 - 30
Mbps
-92 dBm
27 dBm
MCS15 - 144.4
Mbps
-75 dBm
24 dBm
MCS8 - 14.4
Mbps
-95 dBm
27 dBm
MCS15 - 300
Mbps
-72 dBm
26 dBm
MCS8 - 30
Mbps
-91 dBm
26 dBm
Receiver sensitivity
Transmit power
MCS15 - 144.4
Mbps
-75 dBm
26 dBm
MCS8 - 14.4
Mbps
-95 dBm
26 dBm
IEEE 802.11a 5GHz
Data rate
Receiver sensitivity
Transmit power
54 Mbps
-78 dBm
25 dBm
6 Mbps
-95 dBm
27 dBm
IEEE 802.11b/g 2.4GHz
Data rate
Receiver sensitivity
Transmit power
54 Mbps
-78 dBm
26 dBm
11 Mbps
-93 dBm
26 dBm
Receiver sensitivity
Transmit power
IEEE 802.11ac 5GHz @
40MHz channel
Data rate
Receiver sensitivity
Transmit power
IEEE 802.11n 5GHz @
40MHz channel
Data rate
Receiver sensitivity
Transmit power
IEEE 802.11n 5GHz @
20MHz channel
Data rate
Receiver sensitivity
Transmit power
IEEE 802.11n 2.4GHz @
40MHz channel
Data rate
Receiver sensitivity
Transmit power
IEEE 802.11n 2.4GHz @
20MHz channel
Data rate
6 Mbps
-95 dBm
26 dBm
1 Mbps
-98 dBm
26 dBm
Page 9
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Technical Specifications
Standards and Protocols
(applies to all products in series)
Mobility
IEEE 802.11a High Speed Physical Layer in the 5 GHz Band
IEEE 802.11ac WLAN Enhancements for Very High Throughput
IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band
IEEE 802.11d Global Harmonization
IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band
IEEE 802.11h Dynamic Frequency Selection
IEEE 802.11i Medium Access Control (MAC) Security Enhancements
IEEE 802.11n WLAN Enhancements for Higher Throughput
Page 10
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Accessories
HPE 525 802.11ac Dual Radio Access Point Series accessories
Power Supply
HP 1-port Power Injector
HP Gigabit Intellijack 48V Power Supply
J9407B
JD055B
External Antenna
HP Indoor Omnidirectional Dual Band 2.5/6dBi MIMO 4 Element Antenna
JG696A
Page 11
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Summary of Changes
Date
01-Dec-2015
Version History
From Version 1 to 2
Action
Changed
Description of Change
Overview and Technical Specifications updated
Sign up for updates
Rate this document
© Copyright 2015 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
To learn more, visit http://www.hp.com/networking
c04469066 - 15106 - Worldwide - V2 - 1-December-2015
Page 12

Download Report