Interaktiver Produktkatalog Profile Version 1.1 ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen Inhaltsverzeichnis Masse in mm Primär UK 2000 Seite 4 Winkelprofil 2 mm 2000 5 Winkelprofil 2.3 mm 2100 5 Winkelprofil HM 2200 6 Winkelprofil HM (Doppelauflage für Lattenstoss) 2200 Winkelprofil MM T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 2 Alle Profile in 6m Stangen an Lager, lackierte Profile und andere Längen nach Absprache. U-Tragprofil KA 3100 25 KA Gleithalter komplett Fuge 0-6 mm 3100 26 KA Gleithalter komplett Fuge 6-13 mm 3100 26 6 KA Gleithalter komplett Fuge 13-20 mm 3100 26 2300 7 Tragprofil TF 1 3100 27 Winkelprofil MM 92° 2300 7 Eckprofil TF 2-3 3100 28 Eckprofil MM 2300 8 Eckprofil kurz TF 2-3 3100 28 Roggerprofil 2200 9 Leibungsprofil TF 2-3 3100 29 Rogger-C-Profil 2200 9 Aussen-Eck-Leibungsprofil TF 2-3 3100 29 Rogger-C-Profil spez. (Dachkonstruktion) 2200 10 Abschlussprofil unten TF 1 3100 29 T-Profil 2400 11 Abschlusshalter oben TF 2 3100 30 T-Profil exz. 2400 11 Abschlusshalter unten TF 2 3100 30 U-Profil 2500 12 Turnfix TF 1 3100 31 Z-Profil 95° 2600 13 Turnfix TF 2 3100 31 Z-Profil 2600 13 Turnfix TF 3 3100 31 System UB 3000 Seite 14 System KA light 3140 Seite 32 Tragprofil UB 3000 15 Omegaprofil KA light 3140 33 Tragprofil UB V2 3000 15 Einhänger KA light 3140 33 Doppel-Tragprofil UB 25 3000 16 System OM 3200 Seite 34 Doppel-Tragprofil UB 35 3000 16 Omegaprofil OM 3200 35 Eckprofil UB 3000 17 T-Profil OM 3200 36 Agraffen BE 3000 18 Omega T-Profil OM 3200 36 Doppel-Agraffen BE 3000 19 Omegaprofil OM spez. 3200 37 Wind-Agraffen FS 3000 20 Z-Profil OM 3200 38 Untersichtsagraffe US 3000 20 Z-Profil OM spez. 3200 38 Tragagraffen V2 3000 21 Z-Profil 80° OM 3200 39 Wind-Agraffen V2 3000 22 System SZ 3300 Seite 40 System KA/TF 3100 Seite 23 Anfangsprofil SZ 3300 41 Tragprofil KA/TF 3100 24 S-Profil SZ 3300 41 ½ Tragprofil KA/TF 3100 24 S-Profil 85° SZ 3300 42 T-Tragprofil KA/TF 3100 25 S-Profil spez. 3300 42 ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 3 Z-Profil SZ (15/20/50) 3300 43 Halter ZF 3800 60 Z-Profil 85° SZ (15/20) 3300 43 Halter unten ZF 3800 60 Omegaprofil SZ 3300 44 Klemme Abschlussprofil ZF 3800 61 Abschluss Z-Profil SZ 3300 44 Steckprofile 4000 Seite 62 Versteifungsprofil SZ 3300 45 F-Steckprofil 4000 63 Versteifungs U-Profil SZ 3300 45 F-Abschlussprofil 4000 63 System RA 3400 Seite 46 U-Abschlussprofil 4000 64 T-Profil exz. RA 3400 47 System ProdEX 4050 Seite 65 T-Profil RA 3400 47 ProdEX-Profil 4050 66 Doppel-T-Profil RA 3400 48 ProdEX-Abschlussprofil 4050 66 ½-T-Abschlussprofil RA 3400 48 ProdEX-Profil vertikal 4050 67 C-Profil RA 3400 49 ProdEX-Eckprofil 4050 67 T-Inneneckprofil RA 3400 49 Eckprofile 4100 Seite 68 System KH 3500 Seite 50 Eckprofil 42/42/2.0 4100 69 Tragprofil KH 3500 51 Eckprofil 34/34/2.7 4100 69 Halter oben + unten KH 3500 51 Sonderprofile 4200 Seite 70 System UB2 3600 Seite 52 Fugenprofil 32/4.3 4200 71 Einhänger UB2 Doppelloch (Nieten) 3600 53 Fugenprofil 32/7.3 4200 71 Einhänger UB2 Einzelloch (KEIL Hinterschnittanker) 3600 53 Profilverbinder 9000 Seite 72 9000 73 System GH 3700 Seite 54 Profilverbinder mit Rundloch für Omega-/Z-Profil Glashalteprofil oben GH 27/26 3700 55 Profilverbinder mit Ohren für Omega-/Z-Profil 9000 74 Glashalteprofil oben GH 28/28 3700 55 74 3700 55 Provilverbinder für Doppel-Tragprofil UB 9000 Tragprofil perforiert GH 35/26 Glashalteprofil oben GH 106/39 3700 56 9000 75 Glashalteprofil unten GH 67/55 3700 56 Profilverbinder 120mm für HM-/MM-/Rogger-Profil Tragprofil vertikal GH 114/35 3700 57 Profilverbinder 145mm für HM-/MM-/Rogger-Profil 9000 75 Tragprofil seitlich GH 50/50 3700 57 Anschlusswinkel HM-I/MM-A 9000 76 System ZF 3800 Seite 58 Anschlusswinkel HM-A/MM-I 9000 76 Tragprofil ZF 3800 59 Verbindungsblech für Winkel-/T-Profil 9000 77 Abschlusstragprofil ZF 3800 59 Halter oben ZF 3800 60 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen s Eigentum. Es darf ohne unsere ausdrückliche Genehmigung wertet, noch an Dritte weitergegeben werden. Zuwiderhandlung rfolgt. Copyright reserved! © ECOLITE AG We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 2000-000 Primär UK 1 3 2 Seite 4 4 Die Primäre Unterkonstruktion besteht aus Konsolen und horizontal oder vertikal angeordneten Winkel- oder T-Profilen aus Aluminium. Sie bildet eine in der Tiefe nivellierbare Ebene für den Ausgleich von Unebenheiten im Untergrund. Ferner dient A sie als Basis für die Montage der Sekundären Unterkonstruktion, welche – je nach Anwendung – aus einer einfachen Holzlatte, einem lackierten Omega-Profil, einem objekt- oder systemspezifischen Tragprofil usw. bestehen kann. In einigen Fällen von vertikalen Lösungen sind Primär- und Sekundärunterkonstruktion miteinander vereint. A B B C C D D E E Änd. Datum Name Änderung Erstellt Geprüft 03.09.2015 Joel Studer Massstab 1:5 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ng ung 3 5 4 Winkelprofil 2.0 mm 6 A b a c B a 2010-020 30.0 2020-020 45.0 2030-020 40.0 Art.-Nr. 2040-020 40.0 2010-020 2020-020 2030-020 3 2040-020 2041-023 2041-023 45.0 b a 30.0 45.0 40.0 40.0 45.0 c roh lackiert 40.0 2.0 ab Lager Termin n. Abspr. 45.0 2.0 ab Lager Termin n. Abspr. ab Lager Termin n. Abspr. 60.0 2.0 b 2.0 40.0 2.25 45.0 460.0 180.0 220.0 180.0 220.0 Winkelprofil 2.3 mm Änd. Datum a Name Änderung Detailzeichnung cTermin n. Abspr. roh Termin n. Abspr. lackiert Termin nach Absprache 2.0 ab Lager reserve alln. rights in this document and its subject matter. Termin n. Abspr. WeTermin Abspr. TheLager recipient herby acknowledges rights and assures the use of this Termin nachthese Absprache 2.0 ab document only for the purpose it was delivered. © ECOLITE AG Termin nach Absprache C 2.0 5ab Lager 6 Termin nach Absprache 2.0 ab Lager Termin nach Absprache 2.25 ab Lager Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt Ohne sep. Stückliste Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für 3 Art.-Nr. Freigegeben Format A4 Zeichnungs-Nr. Winkelprofil 2.0 mm c a b 5 c 1/1 roh B lackiert 2110-023 35.0 45.0 2.3 ab Lager Termin n. Abspr. 45.0 45.0 2.3 ab Lager Termin n. Abspr. c Roh Lackiert 2.3 ab Lager Termin nach 2.3 Ab Lager Absprache 2.3 ab Lager Termin nach 2.3 Ab Lager Absprache 2.3 ab Lager Termin nach 2.3 Ab Lager Absprache 2.3 ab Lager Termin nach 2.3 Ab Lager Absprache Termin nach 2.3 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Index Plotdatum: 14.08.2015 2120-023 Art.-Nr. a b 2130-023 45.0 60.0 2110-023 35.0 45.0 2140-023 45.0 75.0 2120-023 45.0 45.0 2145-023 45.0 90.0 2130-023 45.0 60.0 2150-023 65.0 75.0 2140-023 45.0 75.0 2150-023 65.0 75.0 Strangpressprofile: Standardlänge = 6000mm Blatt / Anz. WEB-001-03 4 A CAD-System: SolidWorks Art.-Nr. b g ung Seite 5 Termin n. Abspr. Termin n. Abspr. Termin n. Abspr. Termin n. Abspr. C T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG g ng Winkelprofil HM 3 5 4 6 b a c A B Art.-Nr. a 2210-023 b c 45.0 50.0 2.3 3 2220-023 45.0 4 80.0 2.3 2230-023 45.0 120.0 2.3 roh We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this ab Lager document only for the purpose it was delivered. © ECOLITE AG 5 6 ab Lager ab Lager Winkelprofil HM (Doppelauflage für Lattenstoss) a 45.0 b 45.0 45.0 b 50.0 80.0 120.0 c 2.3 2.3 2.3 A Roh Ab Lager Ab Lager Ab Lager C c Art.-Nr. 2210-023 2220-023 2230-023 Name Änderung Roger Mingard Erstellt Massstab 1:1/1:5 Geprüft Freigegeben Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Zeichnungs-Nr. a b4 c 2250-023 87.7 50.0 2.3 ab Lager 2260-023 87.7 80.0 2.3 ab Lager Änd. Datum a 87.7 87.7 Name b 50.0 80.0 Änderung c 2.3 2.3 Blatt / Anz. 1/1 WEB-003-03 3 Art.-Nr. Art.-Nr. 2250-023 2260-023 B Freigegeben Winkelprofil HM 5 CAD-System: SolidWorks Datum Index Plotdatum: 14.08.2015 roh Roh Ab Lager Ab Lager C Erstellt Geprüft Freigegeben Auftrags-Nr. Roger Mingard Massstab 1:2/1:5 Works Änd. a ng Seite 6 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen Seite 7 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG g ng 3 5 4 Winkelprofil MM 6 A a c b B We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG g 3 Art.-Nr. a b4 c 5 2310-023 45.0 50.0 2.3 6 Detailzeichnung roh ab Lager Winkelprofil MM 92° c Roh Lackiert Termin nach 2.3 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Änd. Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt Ohne sep. Stückliste Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Winkelprofil MM b c Art.-Nr. a 3 2330-023 45.0 90.0 2331-023 45.0 100.0 Art.-Nr. 2319-023 2320-023 Änd. Datum a 45.0 45.0 Name 4 2.3 ab Lager Änderung Format A4 roh ab Lager b 90.0 100.0 Freigegeben Zeichnungs-Nr. 2.3 c 2.3 2.3 Erstellt lackiert 5 Blatt / Anz. 1/1 Index WEB-007-04 Detailzeichnung Plotdatum: 26.08.2015 Termin n. Abspr. Termin n. Abspr. roh ab Lager ab Lager lackiert C Termin in Absprache Termin in Absprache Roger Mingard Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Ersatz für B CAD-System: SolidWorks Änderung C Format A4 Blatt / Anz. 1/1 tem: SolidWorks Name a 92 Datum ° Art.-Nr. a b 2310-023 45.0 50.0 b Strangpressprofile: Standardlänge = 6000mm c A ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen igung andlung 3 T +41 (0)55 240 84 52 Seite 8 F +41 (0)55 240 84 55 We reserve all rights in this document and its subject matter. [email protected] The recipient herby acknowledges these rights and assures the use of this www.ecolite.ch document only for the purpose it was delivered. © ECOLITE AG 5 4 6 Eckprofil MM A x a c Dimension der Fassadenplatte 2-20mm x B b Art.-Nr. a b c roh lackiert Detailzeichnung 2320-023 51.8 90.0 2.3 ab Lager Termin n. Abspr. C Änd. Datum a 51.8 Name b 90.0 Änderung c 2.3 roh ab Lager lackiert Termin in Absprache Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. Eckprofil 52x90x2.3 3 4 Blatt / Anz. 1/1 WEB-084-03 5 Index Plotdatum: 21.08.2015 CAD-System: SolidWorks Art.-Nr. 4113-023 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen Seite 9 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG g ng 3 5 4 6 Roggerprofil b a c A B Art.-Nr. a b 2240-238 80.0 52.0 2240-298 80.0 52.0 3 c 4 Länge Doppellöcher 2.3 2380 mm 2.3 2980 mm Detailzeichnung We reserve all rights in this document and its subject matter. 24 Stck. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 30 Stck.. 5 6 Art.-Nr. a b c Länge Doppellöcher 2240-238 2240-298 80.0 80.0 52.0 52.0 2.3 2.3 2380 mm 2980 mm 24 Stk. 30 Stk. Rogger-C-Profil b C c A Name Änderung Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben a Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. Roggerprofil 3 Änd. 4 5 a b c Länge 2241-400 100.0 25.0 2.3 4000 mm Detailzeichnung 40 Stck. a b c Länge Doppellöcher 2241-400 100.0 25.0 2.3 4000 mm 40 Stk. Änderung Erstellt Geprüft Freigegeben Auftrags-Nr. Index Plotdatum: 14.08.2015 Doppellöcher Art.-Nr. Name 1/1 WEB-005-03 Art.-Nr. Datum Blatt / Anz. B Roger Mingard C Massstab 1:2/1:5 CAD-System: SolidWorks Datum rks Änd. T +41 (0)55 240 84 52 ECOLITE AG g ung 3 Fosbergstrasse 16 CH-8633 Wolfhausen 4 Seite 10 F reserve +41 (0)55 We all rights240 84 55 in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this [email protected] document only for the purpose it was delivered. © ECOLITE AG 5 www.ecolite.ch 6 Rogger-C-Profil spez. (Dachkonstruktion) A b c B a Art.-Nr. a b c Länge Doppellöcher 2242-298 132.0 45.0 2.5 2980 mm 30 Stck. Detailzeichnung Art.-Nr. a b c Länge Doppellöcher 2242-298 132.0 45.0 2.5 2980mm 30 Stk. Datum Name Änderung Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Zeichnungs-Nr. Rogger-C-Profil spez. 3 4 WEB-104 5 Blatt / Anz. 1/1 Index Plotdatum: 20.08.2015 CAD-System: SolidWorks Änd. C T-Profil Seite 11 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 6 b c a A a 45.0 a60.0 45.0 80.0 60.0 80.0 80.0 80.0 100.0 80.0 100.0 80.0 120.0 100.0 120.0 100.0 130.0 120.0 45.0 b 65.0 b 45.0 65.0 50.0 45.0 50.0 60.0 50.0 50.0 50.0 45.0 60.0 50.0 50.0 45.0 45.0 50.0 50.0 75.0 c 2.3 c 2.3 2.3 2.3 2.3 3.0 2.3 2.3 2.3 3.0 2.8 2.3 2.3 2.3 2.0 2.8 2.3 2.3 2.3 2451-020 2460-023 120.0 130.0 45.0 50.0 2.0 2.3 Änd. Datum Name Änderung 4 Auftrags-Nr. Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für b Massstab 1:2/1:5 5 6 Freigegeben Format A4 Blatt / Anz. 1/1 Zeichnungs-Nr. T-Profil WEB-008-03 4 5 Index A Plotdatum: 14.08.2015 d 3 C We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG Freigegeben Verwendungsbereich, Projekt Detailzeichnung Abspr. Abspr. Abspr. Abspr. Abspr. Abspr. Abspr. Abspr. Termin n. Abspr. Termin n. Abspr. Roger Mingard Erstellt 3 Ohne sep. Stückliste ab Lager ab Lager Geprüft T-Profil exz. B roh lackiert Termin nach Absprache ab Lager roh lackiert Termin nach Absprache ab Lager ab Lager Termin n. Termin nach Absprache ab Lager Termin nach Absprache ab Lager Termin n. ab Lager ab Lager ab Lager Termin nach Absprache Termin n. ab Lager ab Lager Termin nach Absprache Termin n. Termin nach Absprache ab Lager ab Lager Termin n. Termin nach Absprache ab Lager ab Lager Termin nach Absprache Termin n. ab Lager ab Lager Termin n. Termin nach Absprache ab Lager ab Lager Termin nach Absprache Termin n. ab Lager CAD-System: SolidWorks Art.-Nr. 2409-023 Art.-Nr. 2420-023 2409-023 2430-023 2420-023 2430-030 2431-023 2430-023 2440-023 2430-030 2441-028 2431-023 2450-023 2440-023 2451-020 2441-028 2460-023 2450-023 3275-045 c ung dlung Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch a gung ndlung ECOLITE AG B Art.-Nr. a b c d roh lackiert 2491-020 120.0 50.0 2.0 17.0 ab Lager Termin n. Abspr. ab Lager Termin n. Abspr. ab Lager Termin n. Abspr. Art.-Nr. a 2492-023 130.0 2491-020 120.0 2493-019 130.0130.0 2492-023 2493-019 130.0 Änd. Datum Name b 50.0 50.0 60.0 Änderung 50.0 60.0 c 2.0 2.3 1.9 d 17.0 1.9 17.0 17.0 2.3 Roh 17.0 Ab Lager 17.0 Ab Lager Ab Lager Erstellt Geprüft Lackiert Termin nach Absprache Termin nach Absprache Termin nach Absprache Roger Mingard Massstab Detailzeichnung C T +41 (0)55 240 84 52 Seite 12 We reserve rights in this document and its subject matter. F +41 (0)55 all240 84 55 The recipient herby acknowledges these rights and assures the use of this [email protected] document only for the purpose it was delivered. © ECOLITE AG www.ecolite.ch 5 6 ECOLITE AG hmigung erhandlung AG 3 4 Fosbergstrasse 16 CH-8633 Wolfhausen U-Profil A a d c b B a 2510-019 55.0 2520-019 50.0 b Art.-Nr. 2510-019 2520-019 Änd. Datum c d roh lackiert 90.0 1.9 48.5 ab Lager Termin n. Abspr. 110.0 1.9 48.0 ab Lager Termin n. Abspr. a 55.0 50.0 Name b 90.0 110.0 c 1.9 1.9 Änderung d 48.5 48.0 Detailzeichnung roh ab Lager ab Lager lackiert Termin in Absprache Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. U-Profil 3 C Termin in Absprache Blatt / Anz. 1/1 WEB-011-03 4 5 Index Plotdatum: 14.08.2015 CAD-System: SolidWorks Art.-Nr. 3 4 Fosbergstrasse 16 CH-8633 Wolfhausen Seite 13 Freserve +41 (0)55 We all rights240 84 55 in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this [email protected] document only for the purpose it was delivered. © ECOLITE AG 5 www.ecolite.ch 6 Z-Profil 95° A a 95 c ° d B b Art.-Nr. a b c d roh 2630-030 30.0 30.0 30.0 2.0 ab Lager c d Roh Lackiert Termin nach 30.0 2.0 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport b Datum Name 6 Änderung C A Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben d Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für c Sep. Stückliste gleicher Nr. Freigegeben Format A4 Zeichnungs-Nr. Z-Profil 95° 5 a b c d roh lackiert 2656-040 40.0 56.0 40.0 2.0 ab Lager Termin n. Abspr. 2696-040 40.0 96.0 40.0 2.0 ab Lager Termin n. Abspr. Änd. Datum Name Änderung 1/1 Index Detailzeichnung c d Roh Lackiert Termin nach 40.0 2.0 Ab Lager Absprache Termin nach 40.0 2.0 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Erstellt Geprüft Freigegeben Auftrags-Nr. B Plotdatum: 14.08.2015 Art.-Nr. Art.-Nr. a b 2656-040 40.0 56.0 2696-040 40.0 96.0 Strangpressprofile: Standardlänge = 6000mm Blatt / Anz. WEB-012-03 4 3 CAD-System: SolidWorks a b 2630-030 30.0 30.0 Strangpressprofile: Standardlänge = 6000mm Änd. 5 4 Z-Profil Art.-Nr. lackiert Detailzeichnung We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document onlyn. for Abspr. the purpose it was delivered. © ECOLITE AG Termin C Roger Mingard Massstab 1:2/1:5 Works 3 a ng T +41 (0)55 240 84 52 ECOLITE AG g ng ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 14 3000-000 System UB igentum. Es darf ohne unsere ausdrückliche Genehmigung rtet, noch an Dritte weitergegeben werden. Zuwiderhandlung lgt. Copyright reserved! © ECOLITE AG We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG Das System UB eignet sich für die unsichtbare Befestigung von Fassadenplatten aus Faserzement, Naturstein, Keramik, Eternit, Blech usw. Die Agraffen sind höhenverstellbar, migrationsgeschützt und einfach ein- und auszuhängen. Die auf die jeweilige Anwendung angepassten Agraffen werden bei uns konfektioniert und im Werk oder vor Ort auf die Platten montiert. Für eine flexible Montage existieren Tragprofile in 2verschiedenen Ausprägungen und3 Bautiefen. 4 1 A A B B C C D D E E Änd. Datum Name Änderung Erstellt Geprüft 16.10.2015 Joel Studer Massstab Fosbergstrasse 16 CH-8633 Wolfhausen g ng The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 6 Tragprofil UB b a A c a b 3010-017 72.3 56.8 3010-025 72.3 56.8 3010-035 72.3 56.8 3 Art.-Nr. a b 3010-017 72.3 56.8 3010-025 72.3 56.8 3010-035 72.3 56.8 Strangpressprofile: Standardlänge = 6000mm Tragprofil UB V2 Änd. Datum Name c 4 roh 17.0 ab Lager 25.0 ab Lager 35.0 ab Lager lackiert 5 c Roh Lackiert Termin nach 17.0 Ab Lager Absprache Termin nach 25.0 Ab Lager Absprache Termin nach 35.0 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Änderung Detailzeichnung We reserve all rights in this document and its subject matter. Termin n. Abspr. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG Termin n. Abspr. 6 Termin n. Abspr. C A Roger Mingard Erstellt Massstab 1:1/1:5 Geprüft Ohne sep. Stückliste b Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. Tragprofil UB 3 c Blatt / Anz. 1/1 WEB-014-03 4 5 Index CAD-System: SolidWorks Art.-Nr. B a B Plotdatum: 14.08.2015 Art.-Nr. a b c roh lackiert Detailzeichnung 3011-017 72.3 97.3 17.0 ab Lager Termin n. Abspr. C Art.-Nr. 3011-017 Änd. Datum a 72.3 Name Änderung b 97.3 c 17.0 Erstellt Geprüft Freigegeben Auftrags-Nr. roh ab Lager lackiert Termin in Absprache Roger Mingard Massstab 1:2/1:5 rks g ng T +41 (0)55 240 84 52 Seite 15 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch We reserve all rights in this document and its subject matter. ECOLITE AG 3 Fosbergstrasse 16 CH-8633 Wolfhausen 4 Seite 16 We reserve all rights in this document and its subject matter. F +41 (0)55 240 84 55 The recipient herby acknowledges these rights and assures the use of this [email protected] document only for the purpose it was delivered. © ECOLITE AG 5 www.ecolite.ch 6 A b a Doppel-Tragprofil UB 25 B c Art.-Nr. a 3015-025 72.3 Art.-Nr. 3015-025 b 3 c 122.3 a 72.3 b 122.3 reserve all rights in this document and its subject matter. lackiert We Detailzeichnung The recipient herby acknowledges these rights and assures the use o roh 25.0 4 Termin n.document Abspr.only for the purpose it was delivered. ab Lager c 25.0 roh 5 ab Lager lackiert C © ECOLITE AG 6 Termin in Absprache Doppel-Tragprofil UB 35 Datum Name Änderung Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt Ohne sep. Stückliste Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. b Doppel-Tragprofil UB 25 3 Blatt / Anz. 1/1 Index WEB-201 4 CAD-System: SolidWorks Änd. a he Genehmigung n. Zuwiderhandlung OLITE AG T +41 (0)55 240 84 52 ECOLITE AG ng lung 5 Plotdatum: 03.11.2015 c Art.-Nr. a b Art.-Nr. 3015-035 72.3 3015-035 Änd. Datum a 142.3 72.3 Name Änderung c b 35.0 142.3 roh c ab Lager 35.0 Erstellt lackiert roh Termin n. Abspr. ab Lager Detailzeichnung lackiert Termin nach Absprache Roger Mingard Massstab T +41 (0)55 240 84 52 Seite 17 F +41 (0)55 240 84 55 We reserve all rights in this document and its subject matter. [email protected] The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG www.ecolite.ch ECOLITE AG g ung Fosbergstrasse 16 CH-8633 Wolfhausen 3 5 4 6 Eckprofil UB A b c B a Art.-Nr. a b c roh lackiert 3020-020 75.0 75.0 2.0 ab Lager Termin n. Abspr. Änd. Datum Name c Roh Lackiert Termin nach 2.0 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Änderung C Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. Eckprofil UB 3 4 Blatt / Anz. 1/1 WEB-015-03 5 Index Plotdatum: 14.08.2015 CAD-System: SolidWorks Art.-Nr. a b 3020-020 75.0 75.0 Strangpressprofile: Standardlänge = 6000mm Detailzeichnung A A Fosbergstrasse 16 CH-8633 Wolfhausen 3 Agraffen BE 2 2 3 4 3 A B Art.-Nr. 3042-050 Tragagraffe BE 1er mit Gewindestift M8x20mm 3040-050 Länge = 50mm fe BE 1er 3041-050 3043-050 Tragagraffe BE 1er mit Gewindestift M8x20mm und Migrationsschutz Länge = 50mm Art.-Nr. efeBE BE1er 1er e20mm BE 2er 20mm fe BE 1er e BE 1er e20mm BE 2er z20mm z 3042-050 Tragagraffe BE 1er 3042-250 Tragagraffe BE 3er mit Gewindestift M8x20mm 3042-050 mit Gewindestift M8x20mm Länge = 50mm Länge = 250mm B 3043-050 Tragagraffe BE 1er3043-050 3043-250 Tragagraffe BE C 3er mit Gewindestift M8x20mm mit Gewindestift M8x20mm und Migrationsschutz und Migrationsschutz Länge = 50mm Länge = 250mm Art.-Nr. 3er e BE 2er e BE 4er 1er 20mm x20mm z20mm z 3043-250 Tragagraffe BE 3er mit Gewindestift M8x20mm und Migrationsschutz Länge = 250mm 3043-150 Länge Detailzeichnung 50.0 mm mit Migrationsschutz A 50.0 mm A C Tragagraffe BE 1er Länge mit Gewindestift M8x20 mm 50.0 mm mit Gewindestift M8x20 mm und Migrationsschutz 50.0 mm Detailzeichnung C B C Tragagraffe BE 2er Länge mit Gewindestift M8x20 mm 150.0 mm mit Gewindestift M8x20 mm und Migrationsschutz 150.0 mm D e BE 4er e BE 3er 20mm x20mm z e BE 3er x20mm z fe BE 2er x20mm Länge 3042-250 mit Gewindestift M8x20 mm 250.0 mm 3043-250 mit Gewindestift M8x20 mm und Migrationsschutz 21.8 250.0 mm 94 Verwendungsbereich, Projekt oder Thermostop auf Anfrage lieferbar Format Web-Site rung r Nr. zr Nr. für A4 Sach- / Artikel-Nr. Zeichnungs-Nr. Benennung 2 Roger Mingard 94 3043-350 Auftrags-Nr. Status Blatt / Anz. Ursprung E Ersatz für Index 1/1 21.8 94 AgraffenWEB-018-02 BE 3 Art.-Nr. Blatt / Anz. D 1/1 Index Printdate: 09.06.2015 3 1:5 Printdate: 09.06.2015 mit Gewindestift M8x20 mm und Migrationsschutz 350.0 mm Format Blatt / Anz. A4 1/1 Zeichnungs-Nr. Vormontierter Moosgummi Vormontierter Moosgummi oder Thermostop oder Thermostop auf Anfrage lieferbar auf Anfrage lieferbar Index WEB-018-02E E Printdate: 09.06.2015 Massstab 1:5 üft egeben Erstellt Erstellt Geprüft Geprüft Format Blatt / Anz. D Länge Massstab WEB-018-02 mit Gewindestift M8x20 mm 350.0 mm Tragagraffe 4er Roger BE Mingard 21.8 94 Vormontierter Moosgummi s A4 3042-350 1:5Geprüft Freigegeben 3 2 x20mm z ags-Nr. Format Massstab Erstellt 21.8 fe BE 4er egeben E Ersatz für CAD-System: SolidWorks üft 1:5 Zeichnungs-Nr. AgraffenRoger BEMingard Detailzeichnung Massstab Vormontierter Moosgummi oder Thermostop auf Anfrage lieferbar Ursprung SolidWorks 94 Sach- / Artikel-Nr. Benennung fe BE 4er llt x20mm Roger Mingard Status Web-Site er Nr. C E Tragagraffe BE 3er 3042-250 3042-250 Tragagraffe BE 3erTragagraffe BE 3er Erstellt mit Gewindestift M8x20mm mit Gewindestift M8x20mm Länge = 250mm Länge = 250mm Vormontierter Moosgummi Geprüft oder Thermostop 3043-250 3043-250 Tragagraffe BE 3erTragagraffe BE D 3er auf Anfrage lieferbar M8x20mm Freigegeben mit Gewindestift M8x20mm mit Gewindestift und Migrationsschutz E und Migrationsschutz Auftrags-Nr. Länge = 250mm Länge = 250mm Verwendungsbereich, Projekt er Nr. C Art.-Nr. 21.8 fe BE 2er x20mm z Vormontierter Moosgummi oder Thermostop auf Anfrage lieferbar 94 3043-050 3043-050 Tragagraffe BE 1erTragagraffe BE 1er mit Gewindestift M8x20mm mit Gewindestift M8x20mm und Migrationsschutz und Migrationsschutz Länge = 50mm Länge = 50mm CAD-System: SolidWorks ffe BE 1er z e BE 4er 20mm Detailzeichnung 21.8 3042-050 BE 1er 3042-050 Tragagraffe BE 1erTragagraffe D mit Gewindestift M8x20mm mit Gewindestift M8x20mm Länge = 50mm Länge = 50mm Massstab Massstab Roger Mingard Roger Mingard 1:5 CAD-System: SolidWorks e BE 1er x20mm z ffe BE 1er rung B Windagraffe BE 1er D 3042-250 Tragagraffe BE 3er mit Gewindestift M8x20mm 3042-150 Länge = 250mm s 4 B 3er e BE 2er e BE 4er 20mm 20mm ags-Nr. Seite 18 4 fe BE 1er llt T +41 (0)55 240 84 52 B F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG 1:5 Detailzeichnung 3 4 A Fosbergstrasse 16 CH-8633 Wolfhausen 3 Doppel-Agraffen BE3 2 2 3062-050 Doppel-Tragagraffe BE 1er mit Gewindestift M8x20mm 3 Länge = 50mm 4 3063-050 Doppel-Tragagraffe BE 1er A mit Gewindestift M8x20mm und Migrationsschutz B Länge = 50mm -Tragagraffe BE 1er M8x20mm hutz 4 B Art.-Nr. Doppel-Tragagraffe BE 1er Länge 3062-050 mit Gewindestift M8x20 mm 50.0 mm 3063-050 mit Gewindestift M8x20 mmAundA 50.0 mm Migrationsschutz -Tragagraffe BE 2er M8x20mm -Tragagraffe BE 1er M8x20mm 3062-250 Doppel-Tragagraffe BE 3er mit Gewindestift M8x20mm Länge = 250mm -Tragagraffe BE 2er -Tragagraffe BE BE 1er 3er M8x20mm -Tragagraffe M8x20mm hutz M8x20mm hutz -Windagraffe affe BE 1er BE 1er -Tragagraffe BE 3er M8x20mm -Windagraffe hutz affe BE 1er BE 1er utz mit Gewindestift M8x20mm und Migrationsschutz C Länge = 250mm Doppel-Tragagraffe 3062-0503062-050 Doppel-Tragagraffe BE 1er BE 1er mit Gewindestift M8x20mm mit Gewindestift M8x20mm Länge = 50mm Länge = 50mm Art.-Nr. Doppel-Tragagraffe BE 2er 3063-250 Doppel-Tragagraffe BE 3er3062-150 B 3063-150 mit Gewindestift M8x20 mm und Migrationsschutz B Art.-Nr. -Tragagraffe BE 4er M8x20mm -Tragagraffe BE 3er hutz M8x20mm hutz -Tragagraffe affe BE 2er BE 2er M8x20mm m 3062-250 mit Gewindestift M8x20 mm D 3063-250 mit Gewindestift M8x20 mm und Migrationsschutz 21.8 C 250.0 mm 250.0 mm C 170.5 Vormontierter Moosgummi oder Thermostop auf Anfrage lieferbar E 170.5 E 21.8 Art.-Nr. Doppel-Tragagraffe BE 4er 3062-350 mit Gewindestift M8x20 mm 3063-350 mit Gewindestift M8x20 mm und Massstab Roger Mingard Migrationsschutz Erstellt Geprüft 21.8 Freigegeben RogerVormontierter MingardMoosgummi Massstab 170.5 oder Thermostop auf Anfrage lieferbar Verwendungsbereich, Projekt Web-Site Index WEB-019-002 Roger Mingard 170.5 170.5 A4BE 1 / 1 Doppel-Agraffen Zeichnungs-Nr. 2 CAD-System: SolidWorks Format Ersatz für E Blatt / Anz. Länge D 1:5 21.8 Auftrags-Nr. Ursprung Sach- / Artikel-Nr. Benennung D 1:5Status Format Blatt / Anz. A4 1/1 Vormontierter Moosgummi Vormontierter Moosgummi oder Thermostop oder Thermostop auf Anfrage lieferbar auf Anfrage lieferbar Zeichnungs-Nr. Index WEB-019-002 Printdate: 09.06.2015 E E 3 Printdate:Massstab 09.06.2015 1:5 eigegeben ftrags-Nr. ErstelltErstellt atus Geprüft Geprüft Blatt / Freigegeben Anz. Freigegeben Format sprung A4 atz für Zeichnungs-Nr. Verwendungsbereich, Projekt Verwendungsbereich, Projekt 1/1 Auftrags-Nr. Auftrags-Nr. Index StatusStatus Ursprung Ursprung WEB-019-002 ErsatzErsatz für für Web-Site Web-Site her . Nr. / Artikel-Nr. / Artikel-Nr. .rer Nr. Sach-Sach3 Benennung Benennung Mingard RogerRoger Mingard Printdate: 09.06.2015 Massstab Massstab 1:5 1:5 D-System: SolidWorks prüft CAD-System: SolidWorks tellt 3 Detailzeichnung Vormontierter Moosgummi oder Thermostop auf Anfrage lieferbar -Tragagraffe affe BE 4er BE 4er M8x20mm m hutz tellt Länge D Doppel-Tragagraffe 3063-2503063-250 Doppel-Tragagraffe BE 3er BE 3er mit Gewindestift M8x20mm mit Gewindestift M8x20mm und Migrationsschutz und Migrationsschutz Länge = 250mm Länge = 250mm 21.8 -Tragagraffe affe BE 4er BE 4er M8x20mm m prung B Doppel-Tragagraffe BE 3er D atz für Detailzeichnung 150.0 mm 150.0 mm C Doppel-Tragagraffe 3062-2503062-250 Doppel-Tragagraffe BE 3er BE 3er mit Gewindestift M8x20mm mit Gewindestift M8x20mm Länge = 250mm Länge = 250mm -Tragagraffe affe BE 2er BE 2er M8x20mm m hutz erer tus Nr. Länge Detailzeichnung Doppel-Tragagraffe 3063-0503063-050 Doppel-Tragagraffe BE 1er BE 1er mit Gewindestift M8x20mm mit Gewindestift M8x20mm und Migrationsschutz und Migrationsschutz Länge = 50mm Länge = 50mm -Tragagraffe BE 4er M8x20mm -Tragagraffe BE 3er M8x20mm prüft eigegeben her Nr. trags-Nr. C mit Gewindestift M8x20 mm CAD-System: SolidWorks -Windagraffe BE 1er utz -Tragagraffe BE 1er M8x20mm Seite 19 4 Format Format Blatt / Blatt Anz. / Anz. A4 A4 1 / 11 / 1 Zeichnungs-Nr. Zeichnungs-Nr. Index Index D-System: SolidWorks -Windagraffe BE 1er e T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG A 350.0 mm 350.0 mm Detailzeichnung T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 B CH-8633 Wolfhausen 3 2 1 4 Wind-Agraffen FS ndagraffe FS 1er m C 4 A 3030-150 Windagraffe FS 2er Länge = 150mm Art.-Nr. Windagraffe FS 1er Länge 3030-050 21.8 Windagraffe FS 1er 50.0 mm 3030-150 Windagraffe FS 2er Länge = 150mm C Detailzeichnung A Vormontierter Moosgummi oder Thermostop auf Anfrage lieferbar 88.5 graffe FS 1er C 3 2 Seite 20 D ndagraffe FS 2er mm Art.-Nr. Windagraffe FS 2er Länge D 3030-150 Windagraffe FS 2er 150.0 mm B 21.8 Detailzeichnung 21.8 B 88.5 88.5 Vormontierter Moosgummi oder Thermostop Vormontierter Moosgummi auf Anfrage lieferbar oder Thermostop auf Anfrage lieferbar D E E C Untersichtsagraffe US Änderung Verwendungsbereich, Projekt Web-Site eicher Nr. Verwendungsbereich, Projekt e Sach- / Artikel-Nr. nderer Nr. Web-Site US 1er cher Nr. 3050-050 Untersichtsagraffe Benennung Länge = 50mm Sach- / Artikel-Nr. erer Nr. Benennung Windagraffe FS Erstellt Wind-Agraffen FS 2 87 1:5 1:5 A4 A4 Roger Mingard 2 Freigegeben Auftrags-Nr. Status Format Ursprung A4 Ersatz für Zeichnungs-Nr. FS Blatt / Anz. 1/1 WEB-016-02 3 Index C Detailzeichnung D Printdate: 09.06.2015 1:5 3 1/1 1/1 WEB-016-02 WEB-016-03 3 Massstab Geprüft ojekt Massstab CAD-System: SolidWorks CAD-System: SolidWorks sagraffe US 1er iste Roger Mingard Erstellt Geprüft Massstab Erstellt Roger Mingard Freigegeben Geprüft Auftrags-Nr. Art.-Nr. Untersichtsagraffe US 1er Länge Freigegeben Status Auftrags-Nr. E 3050-050 Moosgummi Untersichtsagraffe US 1er 50.0 mm Format Blatt / Anz. Ursprung Vormontierter oder Thermostop Status auf Anfrage lieferbar Ersatz für Format Blatt / Anz. Ursprung Index Zeichnungs-Nr. Ersatz für Vormontierter Moosgummi oder Thermostop Index Zeichnungs-Nr. 87 auf Anfrage lieferbar 21.8 Name Änderung Printdate: 20.08.2015 D CAD-System: SolidWorks Name 21.8 m Printdate: 09.06.2015 E E Roger Mingard Erstellt Änd. er Nr. Datum Name Änderung Verwendungsbereich, Projekt Web-Site Freigegeben Auftrags-Nr. Status Ursprung Massstab 1:5 Geprüft Roger Mingard Erstellt Geprüft Freigegeben Auftrags-Nr. Format Blatt / Anz. Massstab 1:5 rks Änderung : SolidWorks Name T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 2 2 2 3 Tragagraffen V2 2 2 3 V2 1er V2 1er agraffe mm ft1er M8x20mm mClip UB 3 3 2 3 3 4 4 4 4 4 4 Art.-Nr. Tragagraffe V2 1er Länge 3072-050 mit Gewindestift M8x20 mm und Kunststoff-Clip UB 50.0 mm 3073-050 A A mit Gewindestift M8x20 mm und Migrationsschutz A 50.0 A mm A Art.-Nr. Tragagraffe BE 1er Länge 3072-150 mit Gewindestift M8x20 mm und Kunststoff-Clip UB 150.0 mm 3073-150 mit Gewindestift M8x20 mm und Migrationsschutz 150.0 mm V2 1er V2 1er agraffe mm ft1er M8x20mm schutz m 2 2er V2 2er agraffe mm t M8x20mm 2er Clip m UB m 2 2er V2 2er agraffe mm t M8x20mm 2er schutz m m 2 3er V2 3er agraffe mm t M8x20mm 3er Clip m UB m B Seite 21 B Detailzeichnung A B B B Detailzeichnung B Art.-Nr. Tragagraffe BE 2er Länge 3072-250 mit Gewindestift M8x20 mm und Kunststoff-Clip UB 250.0 mm 3073-250 mit Gewindestift M8x20 mm und Migrationsschutz 250.0 mm Detailzeichnung 2 3er V2 3er agraffe mm t M8x20mm 3er schutz m m V2 4er V2 4er agraffe mm ft4er M8x20mm Clip m UB m C C C C C C Art.-Nr. Tragagraffe BE 3er 3072-350 mit Gewindestift M8x20 mm und Kunststoff-Clip UB Länge 350.0 mm 3073-350 mit Gewindestift M8x20 mm und Migrationsschutz 350.0 mm Detailzeichnung V2 4er V2 4er agraffe mm ft4er M8x20mm schutz m m D D D D D Art.-Nr. Tragagraffe BE 4er Länge 3072-450 mit Gewindestift M8x20 mm und Kunststoff-Clip UB 450.0 mm 3073-450 mit Gewindestift M8x20 mm und Migrationsschutz 450.0 mm 2 5er V2 5er agraffe mm t M8x20mm 5er Clip m UB m 21.8 2 5er V2 5er agraffe mm t M8x20mm 5er schutz m m Änderung ung me Änderung Name Änderung e Änderung D 21.8 21.8 21.8 21.8 94 94 Vormontierter Moosgummi Vormontierter Moosgummi oder Thermostop Vormontierter Moosgummi Vormontierter Moosgummi Vormontierter Moosgummi oder Thermostop E auf Anfrage oder lieferbar Thermostop oder Thermostop oder Thermostop E Vormontierter Moosgummi auf Anfrage lieferbar E auf Anfrage lieferbar E auf Anfrage lieferbar auf Anfrage lieferbar oder Thermostop Kunststoff-Clip UB E aufUB Anfrage lieferbar Kunststoff-Clip Kunststoff-Clip UB Kunststoff-Clip UB Kunststoff-Clip UB Kunststoff-Clip UB 94 94 94 94 21.8 Massstab Erstellt Mingard Massstab 03.11.2015 RogerRoger Mingard 03.11.2015 Massstab Erstellt RogerRoger Mingard Massstab 03.11.2015 Erstellt Roger Massstab ErstelltErstellt 03.11.2015 Mingard Mingard 03.11.2015 Geprüft Massstab Erstellt Roger Mingard Geprüft 03.11.2015 Geprüft Geprüft Geprüft Freigegeben 1:5 1:5 1:5 1:5 1:5 E Detailzeichnung T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen Seite 22 C C C Wind-Agraffen V2 r Art.-Nr. Windagraffe V2 1er Länge 3080-050 Mit Kunststoff-Clip UB 50.0 mm Art.-Nr. Windagraffe V2 2er D Länge 3080-150 Mit Kunststoff-Clip UB 150.0 mm Detailzeichnung D D 21.8 21.8 89.5 89.5 89.5 21.8 Vormontierter Moosgummi oder Thermostop auf Anfrage lieferbar Vormontierter Moosgummi oder Thermostop Vormontierter Moosgummi auf Anfrage lieferbar Kunststoff-Clip UB oder Thermostop auf Anfrage lieferbar Kunststoff-Clip UB Kunststoff-Clip UB E E Massstab Roger Mingard 03.11.2015 Massstab Erstellt Geprüft03.11.2015 Roger Mingard 1:5 Massstab Erstellt Roger Mingard 03.11.2015 Geprüft Freigegeben nderung 2 Format 3 Blatt / Anz. A4 1/1 1/1 1 / 1Index Format Blatt / Anz. Format Blatt / Anz. Index Zeichnungs-Nr. A4 A4 WEB-203 Index WEB-203 WEB-203 Zeichnungs-Nr. Zeichnungs-Nr. 3 3 CAD-System: SolidWorks Wind-Agraffen V2 d-Agraffen V2 2 graffen V2 1:5 CAD-System: SolidWorks erwendungsbereich, Projekt 1:5 Geprüft Auftrags-Nr. Freigegeben Freigegeben Status Auftrags-Nr. Auftrags-Nr. Ursprung Status Status UrsprungErsatz für Ursprung Ersatz für Ersatz für Printdate: 05.11.2015 Printdate: 05.11.2015 Printdate: 05.11.2015 CAD-System: SolidWorks Erstellt Web-Site Projekt ungsbereich, ereich, Projekt ach- / Artikel-Nr. Site enennung tikel-Nr. Nr. ng 2 E Detailzeichnung Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 23 3100-000 System KA/TF A We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 1 Das System KA eignet sich für vertikale (stehende) Kassetten aus Blech oder Verbundwerkstoffen mit unsichtbarer Befestigung. Das System basiert auf diversen Tragprofilen in verschiedenen Bautiefen und Ausführungen mit in der Höhe beliebig verstellbaren Gleithaltern für Fugen von ca. 4 mm bis 20 mm. Die Einhängebolzen werden im Werk vorab in die Abkantung der Kassetten eingenietet. Für breite Kasset3 2 ten die eine Zwischenabstützung verlangen oder für flache Paneele z.B. aus Glas oder Wabenplatten besteht zudem A die Möglichkeit, rückseitig Winkel mit vormontierten Bolzen aufzukleben. Das System TF eignet sich für eine Befestigung von Feinsteinzeug-Platten mit sichtbaren, lackierten Turnfixhaltern. In die unterschiedlichen Tragprofile werden die Turnfix eingedreht und mit einer Punzung in der Höhe festgestellt. Die Feinsteinzeug-Platten können anschliessend in die Turnfixhalter gestellt und mittels Federn gegen Migration gesichert 3 2 werden. 1 4 4 A B B B C C C D D D E Änd. Datum Name Änderung Erstellt Freigegeben Auftrags-Nr. Ohne sep. Stückliste F Sep. Stückliste anderer Nr. Status Ursprung Sep. Stückliste gleicher Nr. Ersatz für Sach- / Artikel-Nr. Benennung Systemzeichnung KA 1 2 E Änd. 3 Datum Joel Studer 08.10.2015 Geprüft Verwendungsbereich, Projekt E Name Erstellt 1:5 1 3100-000 Massstab 1:5 Freigegeben Verwendungsbereich, Projekt 1/1 Status Format Ursprung A4 Ersatz für Sach- / Artikel-Nr. Sep. Stückliste anderer Nr. Format Blatt / Anz. Benennung Zeichnungs-Nr. Joel Studer Auftrags-Nr. Sep. Stückliste gleicher Nr. A4 02.10.2015 Geprüft Massstab Ohne sep. Stückliste F Änderung CAD-System: SolidWorks Dieses Dokument ist unser geistiges Eigentum. Es darf ohne unsere ausdrückliche Genehmigung weder kopiert, vervielfältigt oder verwertet, noch an Dritte weitergegeben werden. Zuwiderhandlung ist strafbar und wird strafrechtlich verfolgt. Copyright reserved! © ECOLITE AG The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG weder kopiert, vervielfältigt oder verwertet, noch an Dritte weitergegeben werden. Zuwiderhandlung ist strafbar und wird strafrechtlich verfolgt. Copyright reserved! © ECOLITE AG ECOLITE AG Zeichnungs-Nr. Systemzeichnung TF Index Plotdatum: 09.10.2015 2 3100-000 3 Blatt / Anz. 1/1 Index Plotdatum: 09.10.2015 Fosbergstrasse 16 CH-8633 Wolfhausen ng lung document only for the purpose it was delivered. 3 5 4 © ECOLITE AG 6 Tragprofil KA/TF A a b c B Art.-Nr. a b c roh lackiert 3110-025 82.0 50.0 25.0 ab Lager Termin n. Abspr. 3110-035 Art.-Nr. 82.0 50.0 b 35.0 50.0 50.0 50.0 50.0 4 50.0 50.0 60.0 c ab Lager 25.0ab Lager 35.0ab Lager 50.0 80.0 50.0 3110-025 3110-050 82.0 3110-035 3113-050 92.0 3 3110-050 3110-080 3113-050 a 82.0 82.0 82.0 82.0 92.0 50.0 60.0 ½ Tragprofil KA/TF Detailzeichnung Termin n. Abspr. lackiert roh nach Absprache reserve all inTermin this document and its subject matter. abWe Lager Termin n.rights Abspr. The recipient herby acknowledges these rights and assures the use of this Termin nach Absprache the purpose it was delivered. © ECOLITE AG abdocument Lager only Termin n.forAbspr. 5ab Lager 6 Termin nach Absprache C Termin nach Absprache ab Lager Termin nach Absprache ab Lager A Datum Name Änderung Roger Mingard Erstellt c 1:2/1:5 Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt Ohne sep. Stückliste Status Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für a Sep. Stückliste gleicher Nr. Freigegeben Format A4 Zeichnungs-Nr. Tragprofil KA / TF 5 a b c roh lackiert 3111-025 57.3 38.0 25.0 ab Lager Termin n. Abspr. 3111-035 57.3 38.0 35.0 ab Lager Termin n. Abspr. Datum a 57.3 57.3 Name Änderung b 38.0 38.0 1/1 c 25.0 35.0 roh ab Lager ab Lager Erstellt Index Plotdatum: 17.08.2015 Art.-Nr. Art.-Nr. 3111-025 3111-035 Blatt / Anz. WEB-020-03 4 3 Änd. Massstab Geprüft CAD-System: SolidWorks Änd. b ng lung T +41 (0)55 240 84 52 Seite 24 F +41 (0)55 240 84 55 [email protected] We reserve all rights in this document and its subject matter. www.ecolite.ch The recipient herby acknowledges these rights and assures the use of this ECOLITE AG B Detailzeichnung lackiert C Termin nach Absprache Termin nach Absprache Roger Mingard Massstab T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG g 5 4 6 T-Tragprofil KA/TF d A b a c B Art.-Nr. a b c d roh 3112-075 82.0 50.0 25.0 75.0 ab Lager 3 Detailzeichnung We lackiert reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this Termin document onlyn. for Abspr. the purpose it was delivered. © ECOLITE AG 5 4 6 U-Tragprofil KA Datum Name Änderung CA Roger Mingard Erstellt c Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt Ohne sep. Stückliste Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. T-Tragprofil KA / TF Art.-Nr. 3 a b 3140-045 94.4 45.0 Art.-Nr. a b 3140-045 94.4 45.0 Strangpressprofile: Standardlänge = 6000mm Änd. Datum Name Änderung 4 Massstab 1:2/1:5 Geprüft Blatt / Anz. 1/1 WEB-022-04 c roh 78.8 ab Lager 5 lackiert Index Erstellt Freigegeben Auftrags-Nr. B Detailzeichnung Plotdatum: 08.09.2015 Termin n. Abspr. c Roh Lackiert Termin nach 78.8 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Geprüft CAD-System: SolidWorks Änd. c d Roh Lackiert Termin nach 25.0 75.0 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport C Roger Mingard Massstab 1:2/1:5 orks Art.-Nr. a b b 3112-075 82.0 50.0 Strangpressprofile: Standardlänge = 6000mm a g ng 3 Seite 25 um. Es darf ohne unsere ausdrückliche Genehmigung och an Dritte weitergegeben werden. Zuwiderhandlung Copyright reserved! © ECOLITE AG ECOLITE AG 3 2 We reserve all rights in this docum The recipient herby acknowledges document only for the purpose it w T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 4 Fosbergstrasse 16 CH-8633 Wolfhausen Seite 26 5 KA Gleithalter komplett / Fuge 0-6 mm b 3150-027 KA Gleithalter links 9901-040 Kunststoff-Clip 4mm 3157-000 Niete Lagerbolzen 5.0x30mm (Alu/Inox) K14 c d a 3151-027 KA Gleithalter rechts 3156-000 KA Alu-Lagerbolzen Feststell-Schraube vormontiert Alucobond-Kassette (4mm) (transparent) istiges Eigentum. Es darf ohne unsere ausdrückliche Genehmigung er verwertet, noch an Dritte weitergegeben werden. Zuwiderhandlung lich verfolgt. Copyright reserved! © ECOLITE AG Art.-Nr. 3150-027 3151-027 a b c 27.0 40.0 40.0 27.0 40.0 40.0 2 3 d roh Info 4.0 ab Lager Halter links Detailzeichnung 4.0 ab Lager Halter rechts 4 We reserve all right The recipient herby document only for t 5 KA Gleithalter komplett / Fuge 6-13 mm b a 27.0 27.0 b 40.0 40.0 d 4.0 4.0 roh ab Lager ab Lager 3153-024 KA Gleithalter rechts 3156-000 KA Alu-Lagerbolzen H d a Änd. Datum Feststell-Schraube vormontiert Name Änderung Verwendungsbereich, Projekt Ohne sep. Stückliste 2 Art.-Nr. a 3152-024 23.5 3 b Sep. Stückliste c gleicher Nr. d roh 4 Web-Site 40.0 40.0 ab Lager Sep. Stückliste anderer Nr. 4.0 Sach- / Artikel-Nr. 23.5 4.0 Benennung ab Lager 40.0 40.0 Geprüft Freigegeben Auftrags-Nr. Status 5 Detailzeichnung Ursprung Halter links Ersatz für WEB KA Gleithalter komplett / Fuge 0-6 mm 3154-020 KA Gleithalter links 9901-040 Kunststoff-Clip 4mm Art.-Nr. 3152-024 3153-024 c Zeichnung Halter rechts a 23.5 23.5 5 b 40.0 40.0 c 40.0 40.0 3157-000 Niete Lagerbolzen 5.0x30mm (Alu/Inox) K14 3155-020 KA Gleithalter rechts 3156-000 KA Alu-Lagerbolzen d 4.0 4.0 roh ab Lage ab Lage d a We reserve all rights in this document a The recipient herby acknowledges thes document only for the purpose it was d lackiert 4 3 KA2 Gleithalter komplett / Fuge 13-20 mm b Roger Min Erstellt Alucobond-Kassette (4mm) (transparent) s darf ohne unsere ausdrückliche Genehmigung n Dritte weitergegeben werden. Zuwiderhandlung opyright reserved! © ECOLITE AG 3153-024 c 40.0 40.0 3152-024 KA Gleithalter links 9901-040 Kunststoff-Clip 4mm 3157-000 Niete Lagerbolzen 5.0x30mm (Alu/Inox) K14 c Art.-Nr. 3150-027 3151-027 Feststell-Schraube vormontiert A A Änd. Datum Name Änderung Alucobond-Kassette (4mm) (transparent) Erstellt Geprüft Freigegeben Art.-Nr. a b 3154-020 19.5 40.0 3155-020 19.5 40.0 c d Ohne sep. Stückliste 40.0 4.0 Nr. Sep. Stückliste gleicher Sep. Stückliste anderer 40.0 4.0 Nr. roh lackiert Verwendungsbereich, Projekt ab Web-Site Lager Halter links Sach/ Artikel-Nr.Halter rechts ab Lager Benennung Auftrags-Nr. Detailzeichnung Status Ursprung Ersatz für KA Gleithalter komplett / Fuge 6-13 mm 2 3 4 5 T +41 (0)55 240 84 52 Seite 27 F +41 (0)55 240 84 55 We reserve all rights in this document and its subject matter. [email protected] Fosbergstrasse 16 The recipient herby acknowledges these rights and assures the use of this only for the purpose it was delivered. © ECOLITE AG www.ecolite.ch CH-8633 Wolfhausen document ECOLITE AG 3 5 4 6 Tragprofil TF 1 A a c b B Art.-Nr. a b c roh lackiert 3125-000 100.0 15.0 26.0 ab Lager Termin n. Abspr. Änd. Datum a 100.0 Name b 15.0 Änderung c 26.0 Erstellt roh ab Lager 12.06.2015 C lackiert Termin nach Absprache Roger Mingard Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Zeichnungs-Nr. Tragprofil TF 1-3 3 4 Blatt / Anz. 1/1 WEB-100-01 5 Index Plotdatum: 17.08.2015 CAD-System: SolidWorks Art.-Nr. 3125-000 Detailzeichnung Fosbergstrasse 16 CH-8633 Wolfhausen g ung 3 The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 5 4 6 Eckprofil TF 2-3 A a c B b Art.-Nr. a b c roh lackiert 3121-000 65.0 65.0 25.0 ab Lager Termin n. Abspr. We reserve all rights in this document and its subject matter. Art.-Nr. a b 3121-000 65.0 65.0 Strangpressprofile: Standardlänge = 6000mm Änd. Datum Name Detailzeichnung The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 5 4 6 c Roh Lackiert Termin nach 25.0 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Änderung C A Roger Mingard Erstellt Massstab 1:2 Geprüft Freigegeben Eckprofil TF 1-3 Auftrags-Nr. Verwendungsbereich, Projekt Ohne sep. Stückliste Status Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für c Sep. Stückliste gleicher Nr. Freigegeben Format A4 Zeichnungs-Nr. Eckprofil TF 1-3 1/1 WEB-024-03 4 3 Blatt / Anz. 5 Index CAD-System: SolidWorks 3 Eckprofil kurz TF 2-3 a B Plotdatum: 17.08.2015 Eckprofil kurz TF 1-3 b Art.-Nr. a b c Art.-Nr. 3124-000 25.7 a b 25.7 c 5.9 3124-000 25.7 25.7 Strangpressprofile: Standardlänge = 6000mm Änd. Datum Name Änderung roh lackiert Detailzeichnung Rohab Lager LackiertTermin n. Abspr. Termin nach 5.9 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Erstellt Geprüft Freigegeben Roger Mingard C Massstab 1:1/1:2 ks hmigung rhandlung G T +41 (0)55 240 84 52 Seite 28 F +41 (0)55 240 84 55 [email protected] We reserve all rights in this document and its subject matter. www.ecolite.ch ECOLITE AG T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 We reserve all rights in this document and its subject matter. The recipient these rights and assures the use of this [email protected] Fosbergstrasse 16 herby acknowledges document only for the purpose it was delivered. © ECOLITE AG www.ecolite.ch CH-8633 Wolfhausen ECOLITE AG Genehmigung uwiderhandlung TE AG 3 5 4 6 Leibungsprofil TF 2-3 a c A B b We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 Art.-Nr. a b4 c 5 3120-000 50.0 85.0 35.0 roh 6 lackiert ab Lager Termin n. Abspr. Aussen-Eck-Leibungsprofil TF 2-3 Art.-Nr. a b c 3120-000 Datum Name 85.0 35.0 Änderung A roh ab Lager Termin nach Absprache Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft c b Freigegeben Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Web-Site Ursprung Sach- / Artikel-Nr. Benennung Ersatz für Sep. Stückliste gleicher Nr. a Sep. Stückliste anderer Nr. Format A4 Zeichnungs-Nr. a 3122-000 b 52.0 3 5 c 49.0 1/1 Index Plotdatum: 17.08.2015 roh lackiert Detailzeichnung We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 25.0 ab Lager Termin n. Abspr. 5 4 Art.-Nr. a b 3122-000 52.0 49.0 Strangpressprofile: Standardlänge = 6000mm B Blatt / Anz. WEB-023-03 4 Art.-Nr. Freigegeben Leibungsprofil TF 1-3 3 6 c Roh Lackiert Termin nach 25.0 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport C Abschlussprofil unten TF 1 A a Änd. Datum Name Änderung Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Status Verwendungsbereich, Projekt b Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Aussen-Eck-Leibungsprofil TF 1-3 c 4 3 Zeichnungs-Nr. Blatt / Anz. 1/1 WEB-025-03 5 Index a b c roh lackiert 3123-000 42.5 48.0 35.0 ab Lager Termin n. Abspr. a 42.5 b 48.0 c 35.0 Roh Ab Lager Lackiert Termin nach Absprache B Plotdatum: 17.08.2015 Art.-Nr. Art.-Nr. 3123-000 C lackiert CAD-System: SolidWorks Änd. 50.0 Detailzeichnung CAD-System: SolidWorks igung andlung migung andlung Seite 29 Detailzeichnung C We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. ECOLITE AG © ECOLITE AG T +41 5 4 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 6 Fosbergstrasse 16 CH-8633 Wolfhausen Seite 30 A Abschlusshalter oben TF 2 a c b We reserve all rights in this documentBand its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 6 Art.-Nr. a b c roh lackiert Detailzeichnung 3128-016 60.0 22.8 16.0 ab Lager Termin n. Abspr. A Abschlusshalter unten TF 2 b 22.8 roh ab Lager lackiert C Termin nach Absprache a 0 c 16.0 Massstab B 1:2 Geprüft Freigegeben CAD-System: SolidWorks Auftrags-Nr. erwendungsbereich, Projekt Web-Site Art.-Nr. ach- / Artikel-Nr. 3128-017 enennung Status a 60.0 Ursprung Ersatz für c 22.8 10.0 .-Nr. 8-017 Datum WEB-101 5 a 60.0 Name roh b 22.8 Änderung Blatt / Anz. lackiert A4ab Lager1 / 1 Zeichnungs-Nr. Abschlusshalter oben TF 2 4 Format b Detailzeichnung Termin n. Abspr. Index Plotdatum: 17.08.2015 c 10.0 Erstellt roh ab Lager 17.07.2015 lackiert C Termin nach Absprache Roger Mingard Massstab 1:2 Geprüft Freigegeben Auftrags-Nr. Stückliste Verwendungsbereich, Projekt Status kliste gleicher Nr. Web-Site Ursprung kliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Zeichnungs-Nr. Abschlusshalter unten TF 2 3 4 WEB-102 5 Blatt / Anz. 1/1 Index Plotdatum: 17.08.2015 CAD-System: SolidWorks c Roger Mingard 17.07.2015 Erstellt b nderung The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 5 4 6 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch A ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen Seite 31 Turnfix TF 1 a c b 5 4 a b c roh lackiert 3129-000 26.0 30.5 4.0 ab Lager Termin n. Abspr. c c 4.0 Änderung roh ab Lager 20.07.2015 Erstellt lackiert Termin nach Absprache Roger Mingard Massstab B 1:2 Geprüft a Name C b 30.5 b Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt ckliste Status gleicher Nr. Web-Site Ursprung anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Turnfix TF26.01 3130-021 Art.-Nr. 3 a 26.0 26.0 26.0 a 4 b 26.0 3130-023 3130-026 20.8 26.0 22.8 25.8 Turnfix TF 3 Detailzeichnung A 4 Format Blatt / Anz. CAD-System: SolidWorks a 26.0 um 6 Art.-Nr. Turnfix TF 2 0 B We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG A4 1/1 We reserve all rights in this document and its subject matter. Index Zeichnungs-Nr. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG b c 20.8 4.0 c 22.8 4.0 25.8 4.0 4.0 4.0roh 5 5 ab Lager 4.0 ab Lager ab Lager lackiert WEB-106-01 6 ab Lager Termin n. Abspr. roh lackiert ab Lager Termin nach Absprache ab Lager Detailzeichnung Plotdatum: 16.09.2015 Termin n. Abspr. Termin n. Abspr. Termin nach Absprache C Termin nach Absprache A b c Änderung Erstellt 17.07.2015 Roger Mingard Massstab 1:2 Geprüft Freigegeben Auftrags-Nr. a Verwendungsbereich, Projekt Status Nr. Web-Site Ursprung Nr. Sach- / Artikel-Nr. Benennung Ersatz für c Format A4 Zeichnungs-Nr. Turnfix TF 2 Art.-Nr. 4 WEB-103 5 c roh Blatt / Anz. 1/1 Index CAD-System: SolidWorks Name Plotdatum: 17.08.2015 a b lackiert 3131-011 30.0 19.0 11.0 ab Lager Termin n. Abspr. 3131-013 30.0 19.0 12.5 ab Lager Termin n. Abspr. B Detailzeichnung T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 4 3141-000 System KA light A Das System KA light wurde für die kostengünstige Montage von stehenden Kassetten mit in der Fuge sichtbaren Bolzen entwickelt. Das System besteht aus einem vertikalen Tragprofil und in der Höhe verschiebbaren Einhängern, welche ihrerseits einen querstehenden Bolzen tragen. Die Kassetten werden seitlich ausgestanzt und in die Bolzen eingehängt. A B B C C D D E E Änd. Datum Name Änderung Erstellt Geprüft Freigegeben Auftrags-Nr. 23.10.2015 Joel Studer Massstab 1:5 orks We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG geistiges Eigentum. Es darf ohne unsere ausdrückliche Genehmigung oder verwertet, noch an Dritte weitergegeben werden. Zuwiderhandlung htlich verfolgt. Copyright reserved! © ECOLITE AG 3 2 1 Seite 32 T +41 (0)55 240 84 52 Seite 33 F +41 (0)55 240 84 55 [email protected] Fosbergstrasse 16 We reserve all rights in this document and its subject matter. herby acknowledges these rights and assures the use of this www.ecolite.ch CH-8633 Wolfhausen The recipient ECOLITE AG document only for the purpose it was delivered. 3 5 4 © ECOLITE AG 6 Omegaprofil KA light A a b c B ng lung Art.-Nr. a b 3142-040 3 95.0 60.0 4 c roh 40.0 ab Lager We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this lackiert Detailzeichnung document only for the purpose it was delivered. © ECOLITE AG 5 Termin n. Abspr. 6 Änd. Datum a 95.0 Name b 60.0 c 40.0 Änderung roh ab Lager 1:2/1:5 a b Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. Omegaprofil KA light 5 a b c roh lackiert 3141-030 95.0 35.0 30.0 ab Lager Termin n. Abspr. Änd. Datum a 95.0 Name b 35.0 Änderung c 30.0 roh ab Lager Auftrags-Nr. Status C lackiert Termin nach Absprache Massstab 1:2 Freigegeben Verwendungsbereich, Projekt Index Detailzeichnung Roger Mingard Erstellt Geprüft Ohne sep. Stückliste 1/1 Plotdatum: 28.09.2015 Art.-Nr. Art.-Nr. 3141-030 Blatt / Anz. WEB-030-04 4 3 B Massstab Geprüft Status A Termin nach Absprache Roger Mingard Erstellt C lackiert Freigegeben olidWorks c Art.-Nr. 3142-040 CAD-System: SolidWorks Einhänger KA light T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 3 2 4 Omega- und Z-Profile können für die verschiedensten Anwendungen eingesetzt werden. In dieser Systemzeichnung dienen A sie zum Beispiel als sekundäre Unterkonstruktion für sichtbar vernietete ALUCOBOND-Platten. Die vertikal stehenden Profile A B B C C D D E E bilden dabei Auflage und Hinterlüftungsraum in einem. Weitere Anwendungen sind geschweisste Dachrandkonstruktionen, Wasserführung, Überbrückung unterschiedlicher Bautiefen usw. Änd. Datum Name Änderung Erstellt Geprüft Freigegeben 02.10.2015 Joel Studer Massstab 1:5 ks istiges Eigentum. Es darf ohne unsere ausdrückliche Genehmigung er verwertet, noch an Dritte weitergegeben werden. Zuwiderhandlung lich verfolgt. Copyright reserved! © ECOLITE AG We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 1 3200-000 System OM Seite 34 ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 35 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 5 4 6 Omegaprofil OM lackiert min in Absprache min in Absprache A c min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache B a b min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache min in Absprache Art.-Nr. a b min in Absprache 3210-180 180.0 120.0 min in Absprache 3215-100 100.0 min in Absprache 3215-140 g 3215-180 3220-140 dungsbereich, Projekt b-Site 3225-100 3225-110 Artikel-Nr. ung 3225-150 egaprofil OM 3225-180 4 Erstellt 140.0 roh lackiert 10.0 ab Lager Termin n. Abspr. 50.0 15.0 ab Lager Termin n. Abspr. 80.0 15.0 ab Lager Termin n. Abspr. 120.0 15.0 ab Lager Termin n. Abspr. 140.0 80.0 20.0 ab Lager Termin n. Abspr. 100.0Freigegeben 50.0 ab Lager Termin n. Abspr. ab Lager Termin n. Abspr. ab Lager Termin n. Abspr. Geprüft 180.0 Freigegeben Auftrags-Nr. Status C c Ursprung 110.0 Ersatz für Roger Mingard 60.0 1:2/1:5 Format A4 150.0 Zeichnungs-Nr. 180.0 120.0 80.0 Massstab 25.0 Blatt / Anz. 25.0 1/ 1 Index 25.0 WEB-033-04 25.0 CAD-System: SolidWorks min in Absprache ab Lager Termin n. Abspr. 50.0 Plotdatum: 07.09.2015 30.0 ab Lager Termin n. Abspr. 150.0 80.0 30.0 ab Lager Termin n. Abspr. 3230-180 180.0 120.0 30.0 ab Lager Termin n. Abspr. 3235-100 100.0 50.0 35.0 ab Lager Termin n. Abspr. 3235-140 140.0 80.0 35.0 ab Lager Termin n. Abspr. 3235-180 180.0 120.0 35.0 ab Lager Termin n. Abspr. 3240-140 140.0 80.0 40.0 ab Lager Termin n. Abspr. 3240-180 180.0 120.0 40.0 ab Lager Termin n. Abspr. 3248-180 180.0 120.0 48.0 ab Lager Termin n. Abspr. 3250-120 120.0 50.0 50.0 ab Lager Termin n. Abspr. 3250-123 120.0 70.0 50.0 ab Lager Termin n. Abspr. 3250-150 150.0 80.0 50.0 ab Lager Termin n. Abspr. 3250-180 180.0 120.0 50.0 ab Lager Termin n. Abspr. 3260-140 140.0 80.0 60.0 ab Lager Termin n. Abspr. 3280-140 140.0 80.0 80.0 ab Lager Termin n. Abspr. 3290-140 140.0 80.0 90.0 ab Lager Termin n. Abspr. 3230-100 5 100.0 3230-150 Detailzeichnung T +41 (0)55 240 84 52 Seite 36 F +41 (0)55 240 84 55 We [email protected] reserve all rights in this document and its subject matter. Thewww.ecolite.ch recipient herby acknowledges these rights and assures the use of this ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen g 3 document only for the purpose it was delivered. 5 4 © ECOLITE AG 6 T-Profil OM A a c b B g Art.-Nr. a b 3275-045 45.0 75.0 3 4 c roh 2.3 ab Lager We reserve all rights in this document and its subject matter. lackiert Detailzeichnung The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 5 Termin n. Abspr. 6 Omega T-Profil OM Datum Name a 45.0 b 75.0 c 2.3 Änderung roh ab Lager lackiert Termin nach Absprache Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft c Freigegeben a Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. T-Profil OM Änd. 5 a b c roh lackiert 3275-085 85.0 75.0 2.3 ab Lager Termin n. Abspr. Datum Name Änderung Auftrags-Nr. Status C Roger Mingard Erstellt Massstab 1:2/1:5 Freigegeben Verwendungsbereich, Projekt B Detailzeichnung c Roh Lackiert Termin nach 2.3 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Geprüft Ohne sep. Stückliste Index Plotdatum: 18.08.2015 Art.-Nr. Art.-Nr. a b 3275-085 85.0 75.0 Strangpressprofile: Standardlänge = 6000mm 1/1 WEB-031-03 4 3 Blatt / Anz. CAD-System: SolidWorks Änd. b Freigegeben lidWorks Art.-Nr. 3275-045 C A T +41 (0)55 240 84 52 Seite 37 F +41 (0)55 240 84 55 [email protected] Fosbergstrasse 16 We reserve all rights in this document and its subject matter. recipient herby acknowledges these rights and assures the use of this www.ecolite.ch CH-8633 Wolfhausen The document only for the purpose it was delivered. © ECOLITE AG ECOLITE AG 3 5 4 6 Omegaprofil OM spez. A a c b B Art.-Nr. a b c roh lackiert Detailzeichnung 3245-096 96.0 45.0 45.0 ab Lager Termin n. Abspr. C Änd. Datum a 96.0 Name b 45.0 c 45.0 Änderung roh ab Lager lackiert Termin nach Absprache Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. Omegaprofil OM spez. 3 4 Blatt / Anz. 1/1 WEB-040-03 5 Index Plotdatum: 18.08.2015 CAD-System: SolidWorks Art.-Nr. 3245-096 ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 38 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 4 5 Z-Profil OM 6 b A iert Absprache c Absprache Absprache a Absprache Absprache Absprache Absprache B Absprache Absprache Absprache Absprache a b c roh lackiert 3215-030 30.0 15.0 50.0 ab Lager Termin n. Abspr. 3215-035 35.0 15.0 35.0 ab Lager Termin n. Abspr. 3220-035 35.0 20.0 35.0 ab Lager Termin n. Abspr. 3225-035 35.0 25.0 35.0 ab Lager Termin n. Abspr. 3230-035 35.0 30.0 35.0 ab Lager Termin n. Abspr. 3235-035 35.0 35.0 35.0 ab Lager Termin n. Abspr. 3240-035 35.0 40.0 35.0 ab Lager Termin n. Abspr. 3250-035 35.0 50.0 35.0 ab Lager Termin n. Abspr. 3260-035 35.0 35.0 ab Lager Termin n. Abspr. Massstab 35.0 ab Lager Termin n. Abspr. Erstellt 3275-035 35.0 60.0 Roger 75.0 Mingard Geprüft 35.0 95.0 3295-035 Freigegeben 3Auftrags-Nr. eich, Projekt Status Freigegeben Format 1/1 Zeichnungs-Nr. b OM Blatt / Anz. A4 Ersatz für . WEB-042-03 4 5 Index Detailzeichnung We reserve all rights in this document and its subject matter. 35.0 1:2/1:5 4 Ursprung OM spez. Z-Profil C The recipient herby acknowledges these rights and assures the use of this ab Lager Termin n. Abspr. document only for the purpose it was delivered. CAD-System: SolidWorks ung dlung Art.-Nr. 5 © ECOLITE AG 6 A c a Plotdatum: 21.08.2015 B Art.-Nr. a b c roh lackiert 3250-080 35.0 50.0 80.0 ab Lager Termin n. Abspr. Art.-Nr. a b c Roh Lackiert Detailzeichnung C ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 39 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG g ng 3 5 4 6 Z-Profil 80° OM b c A 80 ° a B a b c roh lackiert 3220-060 Art.-Nr. 3240-040 3220-060 3255-060 3255-060 3240-060 60.0 20.0 50.0 ab Lager roh ab Lager ab Lager ab Lager ab Lager ab Lager Termin n. Abspr. lackiert Termin n. Abspr. Termin nach Absprache Datum a 40.0 60.0 60.060.0 40.0 Name b 40.0 20.0 55.055.0 40.0 Änderung c 60.0 50.0 50.0 50.0 60.0 Detailzeichnung Termin n. Abspr. Termin nach Absprache Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. Z-Profil 80° OM 3 4 C Termin nach Absprache Blatt / Anz. 1/1 WEB-044-03 5 Index Plotdatum: 18.08.2015 CAD-System: SolidWorks Änd. Art.-Nr. ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 3300-000 System SZ An dieser Stelle werden wir Ihnen baldmöglichst die entsprechenden Systemzeichnungen anzeigen. Wir arbeiten daran. Seite 40 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ng ung 3 5 4 6 Anfangsprofil SZ A a c b B Art.-Nr. a b c roh lackiert Detailzeichnung 3310-018 50.0 40.0 1.8 ab Lager Termin n. Abspr. We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG S-Profil SZ 3 5 4 6 C Art.-Nr. 3310-018 a 50.0 b 40.0 c 1.8 roh ab Lager lackiert A Termin nach Absprache a Änd. Datum Name Änderung c Massstab 1:2/1:5 Freigegeben Auftrags-Nr. b Verwendungsbereich, Projekt Ohne sep. Stückliste Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Anfangsprofil SZ b c Art.-Nr. a 3311-018 35.5 40.5 3312-018 47.5 40.5 3 Art.-Nr. 3211-018 3212-018 Änd. Roger Mingard Erstellt Geprüft Datum a 35.5 47.5 Name Änderung 4 b 40.5 40.5 Freigegeben Format A4 Zeichnungs-Nr. roh 31.0 ab Lager 31.0 ab Lager c 31.0 31.0 Erstellt Geprüft 5 lackiert Blatt / Anz. 1/1 Index WEB-045-03 Detailzeichnung CAD-System: SolidWorks ung dlung Seite 41 B Plotdatum: 18.08.2015 Termin n. Abspr. Termin n. Abspr. roh ab Lager ab Lager lackiert C Termin nach Absprache Termin nach Absprache Roger Mingard Massstab T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ung dlung 3 S-Profil 85° SZ 5 4 6 a A 85 ° c b B Art.-Nr. a 3331-018 b 35.5 c 40.5 3 31.0 roh lackiert Detailzeichnung We reserve all rights in this document and its subject matter. Termin Abspr. The recipientn. herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ab Lager 5 4 6 S-Profil spez. A Änd. a 35.5 b 40.5 Datum Name c c 31.0 Änderung roh ab Lager C lackiert Termin nach Absprache Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben b Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Art.-Nr. a 3341-018 56.5 3 S-Profil 85° SZ 40.5 26.0 b c 4 Freigegeben B Format A4 Zeichnungs-Nr. Blatt / Anz. 1/1 WEB-052-03 roh lackiert ab Lager Termin n. Abspr. 5 CAD-System: SolidWorks Art.-Nr. 3331-018 a Index Detailzeichnung Plotdatum: 18.08.2015 C Art.-Nr. 3341-018 Änd. Datum a 56.5 Name Änderung b 40.5 c 26.0 roh ab Lager Erstellt Geprüft Freigegeben Auftrags-Nr. lackiert Termin nach Absprache Roger Mingard Massstab 1:2/1:5 orks ung dlung Seite 42 T +41 (0)55 240 84 52 Seite 43 F +41 (0)55 240 84 55 [email protected] Fosbergstrasse 16 www.ecolite.ch CH-8633 Wolfhausen We reserve all rights in this document and its subject matter. ECOLITE AG The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 6 Z-Profil SZ (15/20/50) c a A b Art.-Nr. B a b c roh lackiert Detailzeichnung 3313-018 79.0 46.0 28.0 ab Lager Termin n. Abspr. 3315-018 104.0 46.0 53.0 ab Lager Termin n. Abspr. 3316-018 67.0 46.0 19.0 ab Lager Termin n. Abspr. We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG g Art.-Nr.3 3313-018 3315-018 3316-018 a 79.0 104.0 67.0 b4 46.0 46.0 46.0 c 28.0 53.0 19.0 Z-Profil 85° SZ (15/20) roh ab Lager ab Lager ab Lager 5 lackiert Termin nach Absprache 6 C Termin nach Absprache Termin nach Absprache A Name Änderung Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben a Auftrags-Nr. ° Nr. Sep. Stückliste gleicher 85 Sep. Stückliste anderer Nr. Web-Site Ursprung Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. Z-Profil SZ (15/20/50) b a b 5 c roh lackiert 46.0 23.0 ab Lager Termin n. Abspr. 3321-018 79.0 46.0 26.0 ab Lager Termin n. Abspr. b 46.0 46.0 c 23.0 26.0 Index roh ab Lager ab Lager B Detailzeichnung 67.0 a 67.0 79.0 1/1 Plotdatum: 04.11.2015 3320-018 Art.-Nr. 3320-018 3321-018 Blatt / Anz. WEB-047-04 4 3 Art.-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste CAD-System: SolidWorks Datum c Änd. lackiert Termin nach Absprache Termin nach Absprache C T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen Seite 44 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG migung handlung G 3 5 4 6 Omegaprofil SZ c a b A B Art.-Nr. a b c roh lackiert Detailzeichnung 3317-018 100.0 50.0 25.0 ab Lager Termin n. Abspr. We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG Abschluss Z-Profil SZ4 3 5 6 C a 100.0 b 50.0 c 25.0 roh ab Lager lackiert A Termin nach Absprache c Art.-Nr. 3317-018 Datum Name Änderung Roger Mingard Erstellt Massstab 1:2/1:5 a Geprüft Freigegeben Auftrags-Nr. b Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Art.-Nr. 3346-023 3 a Omegaprofil SZ b 25.0 46.0 Art.-Nr. a b 3346-023 25.0 46.0 Strangpressprofile: Standardlänge = 6000mm Änd. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Datum Name Änderung 4 Freigegeben Format A4 Zeichnungs-Nr. 1/1 WEB-048-03 c roh lackiert 23.3 ab Lager Termin n. Abspr. 5 Blatt / Anz. Index B Detailzeichnung Plotdatum: 18.08.2015 c Roh Lackiert Termin nach 23.3 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Erstellt Geprüft C Roger Mingard Massstab CAD-System: SolidWorks Änd. T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] Fosbergstrasse 16 in this document We reserve all rights and its subject matter. The recipient herby acknowledges these rights and assures the use of this www.ecolite.ch CH-8633 Wolfhausen document only for the purpose it was delivered. © ECOLITE AG Seite 45 ECOLITE AG 3 5 4 6 Versteifungsprofil SZ A 3390-020 Verbindungselement SZ L= 20.2mm a b c 3318-022 Versteifungprofil SZ B L 3390-020 Verbindungselement SZ L= 20.2mm a b c roh lackiert 3318-022 43.0 50.0 20.0 ab Lager Termin n. Abspr. 3390-020 Verbindungselement SZ, L = 20.2 mm a 43.0 b c 50.0 20.0 3 4 Verbindungselement SZ, L= 20.2 mm g Datum Versteifungs U-Profil SZ Name Änderung ab Lager roh ab Lager ab Lager Termin n. Abspr. We reserve all rights in this document and its subject matter. C and assures the use of this The recipient herby acknowledges these rights lackiert document only for the purpose it was delivered. Termin nach Absprache 5 Termin nach Absprache Roger Mingard Erstellt Status Verwendungsbereich, Projekt Ursprung ückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für a Web-Site c ückliste gleicher Nr. Freigegeben Format A4 Zeichnungs-Nr. Versteifungsprofil SZ b 3 Blatt / Anz. 1/1 WEB-049-03 4 A 1:2/1:5 Freigegeben ep. Stückliste © ECOLITE AG 6 Massstab Geprüft Auftrags-Nr. Detailzeichnung 5 Index CAD-System: SolidWorks rt.-Nr. 18-022 90-020 Art.-Nr. Plotdatum: 20.08.2015 B Art.-Nr. a b c roh lackiert 3319-040 44.0 46.0 2.5 ab Lager Termin n. Abspr. Art.-Nr. a b 3319-040 46.0 44.0 Strangpressprofile: Standardlänge = 6000mm c Roh Lackiert Termin nach 2.5 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Detailzeichnung C igentum. Es darf ohne unsere ausdrückliche Genehmigung rtet, noch an Dritte weitergegeben werden. Zuwiderhandlung lgt. Copyright reserved! © ECOLITE AG We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 3400-000 System RA 1 Änd. Datum Name Änderung 2 Geprüft Erstellt T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 3 02.10.2015 Joel Studer Seite 46 4 An dieser Stelle werden wir Ihnen baldmöglichst die entsprechende Systembeschreibung anzeigen. Wir arbeiten daran. A A B B C C D D E E Massstab We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG T-Profil exz. RA 3 5 4 6 b a d c A B Art.-Nr. a b 3411-020 130.0 50.0 a 140.0 130.0 140.0 3 Datum Name 2.0 b 50.0 50.0 50.0 17.0 c 2.3 2.0 2.3 d 17.0 17.0 17.0 roh lackiert Detailzeichnung ab Lager Termin n. Abspr. roh lackiert ab Lager Termin n. Abspr. Termin nach Absprache ab Lager Termin nach Absprache ab Lager We reserve all rights in this document and its subject matter. Änderung 4 Erstellt 5 6 Roger Mingard Massstab 1:2/1:5 Geprüft Freigegeben b Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste C The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG T-Profil RA Änd. d Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben A Format A4 Blatt / Anz. 1/1 Zeichnungs-Nr. T-Profil exz. RA WEB-055-03 4 3 CAD-System: SolidWorks Art.-Nr. 3413-023 3411-020 3413-023 c 5 Index Plotdatum: 19.08.2015 c B Art.-Nr. a b c roh lackiert 3412-023 140.0 50.0 2.3 ab Lager Termin n. Abspr. C Art.-Nr. 3412-023 Änd. Datum a 140.0 Name b 50.0 Änderung c 2.3 roh ab Lager lackiert Termin nach Absprache Roger Mingard Erstellt Freigegeben Auftrags-Nr. Sep. Stückliste gleicher Nr. Verwendungsbereich, Projekt Web-Site Status Ursprung Massstab 1:2/1:5 Geprüft Ohne sep. Stückliste Detailzeichnung Freigegeben Format Blatt / Anz. : SolidWorks ung dlung Fosbergstrasse 16 CH-8633 Wolfhausen Seite 47 a gung ndlung T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen Doppel-T-Profil RA 3 Seite 48 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ng 5 4 6 b c a A B a b 3414-020a 154.0b Art.-Nr. 3414-020 154.0 50.0 Strangpressprofile: Standardlänge = 6000mm 50.0Lackiert c50.0 Roh Termin nach 50.0 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport ½-T-Abschlussprofil RA Änd. Datum Name c Änderung 3 Verwendungsbereich, Projekt Ohne sep. Stückliste Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für b ab Lager Termin n. Abspr. C 5 6 1:2/1:5 Freigegeben Format A4 Zeichnungs-Nr. Doppel-T-Profil RA Blatt / Anz. 1/1 WEB-058-03 4 5 Index A Plotdatum: 19.08.2015 c 3 Detailzeichnung Roger Mingard Freigegeben Auftrags-Nr. lackiert We reserve all rights in this document and its subject matter. Massstab The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG Erstellt Geprüft 4 roh CAD-System: SolidWorks Art.-Nr. a B Art.-Nr. a b c roh lackiert 3415-022 66.0 50.0 2.2 ab Lager Termin n. Abspr. Art.-Nr. a b 3415-022 66.0 50.0 Strangpressprofile: Standardlänge = 6000mm Änd. Datum Name c Roh Lackiert Termin nach 2.3 Ab Lager Absprache Preise auf Anfrage, exkl. MwSt. + Transport Änderung Freigegeben Ohne sep. Stückliste Verwendungsbereich, Projekt Status Massstab 1:2/1:5 Geprüft Auftrags-Nr. C Roger Mingard Erstellt Detailzeichnung Freigegeben Works ng ung T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Seite 49 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG C-Profil RA 3 5 4 6 A b c d B Art.-Nr. a b c d roh lackiert Detailzeichnung Art.-Nr. b Roh Lackiert 3416-019 a 80.0 30.0 c 1.9 d 10.0 ab Lager Termin n. Abspr. Termin nach 3416-019 80.0 30.0 1.9 10.0 Ab Lager Absprache 3417-020 80.0 30.0 2.0 12.5 ab Lager Termin n. Abspr. C Termin nach 3417-020 80.0 30.0 2.0 12.5 Ab Lager Absprache Strangpressprofile: Standardlänge = 6000mm Preise auf Anfrage, exkl. MwSt. + Transport We reserve all rights in this document and its subject matter. 3 Name Datum Änderung 5 4 Erstellt 6 Massstab Roger Mingard 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für a C-Profil RA Freigegeben Format A4 Blatt / Anz. 1/1 Zeichnungs-Nr. WEB-060-04 4 5 Index A Plotdatum: 17.09.2015 b 3 CAD-System: SolidWorks T-Inneneckprofil RA B Art.-Nr. a b c roh 3418-026 Art.-Nr. 175.0 2.6 Roh ab Lager a b 82.9 c Lackiert Termin nach 3418-026 175.0 82.9 2.6 Ab Lager Absprache Strangpressprofile: Standardlänge = 6000mm Preise auf Anfrage, exkl. MwSt. + Transport Änd. Datum Name Änderung lackiert Termin n. Abspr. Roger Mingard Erstellt Freigegeben Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Verwendungsbereich, Projekt Web-Site Status Ursprung C Massstab 1:2/1:5 Geprüft Auftrags-Nr. Detailzeichnung Freigegeben Format Blatt / Anz. : SolidWorks Änd. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG c iche Genehmigung en. Zuwiderhandlung ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch a ung dlung ECOLITE AG ntum. Es darf ohne unsere ausdrückliche Genehmigung t, noch an Dritte weitergegeben werden. Zuwiderhandlung . Copyright reserved! © ECOLITE AG We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 1 Änd. Datum 2 Name Änderung Erstellt T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 3 23.10.2015 Joel Studer Seite 50 3500-000 System KH An dieser Stelle werden wir Ihnen baldmöglichst die entsprechende Systembeschreibung anzeigen. Wir arbeiten daran. 4 A A B B C C D D E E Massstab ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen Seite 51 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG hmigung erhandlung AG 3 5 4 Tragprofil KH 6 A b a c Gleiches Tragprofil für oben ind unten B Art.-Nr. a b c roh lackiert Detailzeichnung 3510-020 82.0 21.0 58.0 ab Lager Termin n. Abspr. C a 82.0 b 21.0 c 58.0 Halter oben + unten KH 3 Änd. roh ab Lager 5 4 Datum Name Lackiert We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this Termin in Absprache document only for the purpose it was delivered. © ECOLITE AG 6 var Änderung Erstellt c Geprüft Roger Mingard . Massstab 1:2/1:5 Freigegeben a Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Web-Site Sep. Stückliste gleicher Nr. b Freigegeben Format Ursprung 1/1 Zeichnungs-Nr. Tragprofil KH WEB-062-03 4 3 Blatt / Anz. A4 Ersatz für Sach- / Artikel-Nr. 3511-036 Benennung Halter oben Sep. Stückliste anderer Nr. A 5 Index Plotdatum: 20.08.2015 var . b CAD-System: SolidWorks Art.-Nr. 3510-020 B a 3511-057 Halter unten c C Art.-Nr. 3511-036 Art.-Nr. 3511-057 a 40.0 a 40.0 3511-036 Änd. Datum 3511-057 b 33.2 b 33.2 40.0 Name 33.2 Änderung 40.0 33.2 c 36.0 c 56.8 36.0 Erstellt 56.8 Geprüft roh ab Lager roh ab Lager lackiert Termin in Absprache lackiert ab Lager Detailzeichnung Termin in Absprache Termin n. Abspr. Roger Mingard ab Lager Termin n.Massstab Abspr. 1:2 Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Halter oben + unten KH Freigegeben Format A4 Zeichnungs-Nr. Blatt / Anz. 1/1 WEB-063-03 Index CAD-System: SolidWorks gung ndlung T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 3600-000 System UB2 An dieser Stelle werden wir Ihnen baldmöglichst die entsprechenden Systemzeichnungen anzeigen. Wir arbeiten daran. Seite 52 T +41 (0)55 240 84 52 Seite 53 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch We reserve all rights in this document and its subject matter. ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen g ng The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 6 Einhänger UB2 Doppelloch (Nieten) A a c d b g 2x B 5.1mm Art.-Nr. a b c d roh 3610-055 80.0 10.7 50.0 55.0 ab Lager 3 lackiert Detailzeichnung We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for purpose it was delivered. © ECOLITE AG Termin n.the Abspr. 5 4 6 Einhänger UB2 Einzelloch (KEIL Hinterschnittanker) a 80.0 b 10.7 d c 50.0 d 55.0 roh ab Lager AC lackiert Termin in Absprache c Art.-Nr. 3610-055 Name Änderung Roger Mingard Erstellt Massstab 1:2 Geprüft Freigegeben Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Sep. Stückliste gleicher Nr. b Sep. Stückliste anderer Nr. Web-Site Freigegeben Format Ursprung a b c4 d roh 3620-055 80.0 10.7 50.0 55.0 ab Lager 5 1/1 Zeichnungs-Nr. Einhänger UB2 Doppelloch (Nieten) Art.-Nr.3 Blatt / Anz. A4 Ersatz für Sach- / Artikel-Nr. 1x 7.0mm Benennung CAD-System: SolidWorks Datum a Änd. WEB-065-03 B Index Plotdatum: 20.08.2015 Detailzeichnung lackiert Termin n. Abspr. C Änd. Datum a 80.0 Name b 10.7 Änderung c 50.0 d 55.0 Erstellt Geprüft Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt Status roh ab Lager lackiert Termin in Absprache Roger Mingard Massstab 1:2 Works Art.-Nr. 3620-055 igentum. Es darf ohne unsere ausdrückliche Genehmigung rtet, noch an Dritte weitergegeben werden. Zuwiderhandlung lgt. Copyright reserved! © ECOLITE AG We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 3700-000 System GH 1 Änd. Datum Name Änderung 2 Erstellt Geprüft T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 3 16.10.2015 Joel Studer Seite 54 4 An dieser Stelle werden wir Ihnen baldmöglichst die entsprechende Systembeschreibung anzeigen. Wir arbeiten daran. A A B B C C D D E E Massstab Tall+41 240 84 52 Seite 55 We reserve rights(0)55 in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this F +41 (0)55 240 84 55 document only for the purpose it was delivered. © ECOLITE AG ECOLITE AG 3 [email protected] www.ecolite.ch Fosbergstrasse 16 5 CH-8633 Wolfhausen 4 6 Glashalteprofil oben GH 27/26 A b d We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG a c g 3 5 4 6 B Art.-Nr. a b c d roh lackiert Detailzeichnung 3712-026 27.0 26.0 16.5 7.0 ab Lager Termin n. Abspr. A Glashalteprofil unten GH 28/28 b d C b 26.0 c a 27.0 c 16.5 d 7.0 roh ab Lager lackiert Termin nach Absprache B a Art.-Nr. 3712-026 Datum Name Änderung Erstellt 5 Geprüft 4 Roger Mingard 6 1:2/1:5 Freigegeben Art.-Nr. Ohne sep. Stückliste a b c Verwendungsbereich, Projekt 28.5 Web-Site 3711-028 Sep. Stückliste gleicher Nr.28.0 19.0 Auftrags-Nr. d Status lackiert 7.0 Ursprung ab Lager a 28.0 Termin n. Abspr. Format Blatt / Anz. A Zeichnungs-Nr. Index A4 Tragprofil perforiert GH oben 35/26GH 27/26 Glashalteprofil Art.-Nr. 3 3711-028 Detailzeichnung Ersatz für Sach- / Artikel-Nr. Benennung Sep. Stückliste anderer Nr. roh b 4 28.5 c 19.0 1/1 WEB-112 d 5 7.0 roh ab Lager lackiert CAD-System: SolidWorks Änd. 3 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG Massstab C Plotdatum: 15.09.2015 Termin nach Absprache d Änderung Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben B Auftrags-Nr. b Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Art.-Nr. a 3710-026 35.0 Format Glashalteprofil unten GH ab28/28 25.8 17.0 6.0 Lager b c d roh 4 3 Blatt / Anz. A4 lackiert 1/1 Index Zeichnungs-Nr. WEB-111 Detailzeichnung Termin n. Abspr. 5 Plotdatum: 15.09.2015 C Art.-Nr. a b c d roh lackiert CAD-System: SolidWorks Name a Datum c Änd. T +41 (0)55 240 84 52 Seite 56 F +41 (0)55 240 84 55 [email protected] We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen enehmigung widerhandlung E AG 3 document only for the purpose it was delivered. 5 4 © ECOLITE AG 6 Glashalteprofil oben GH 106/39 A a b c B d a b c d roh 3722-039 106.0 39.9 77.0 19.5 ab Art.-Nr. 3722-039 3 a 106.0 b 39.9 4 Glashalteprofil unten GH 67/55 Änd. Datum Name c 77.0 lackiert Detailzeichnung We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this Lager Termin Abspr. document only for the n. purpose it was delivered. © ECOLITE AG 5 Änderung d 19.5 roh ab Lager 6 lackiert Termin nach Absprache Roger Mingard Erstellt AMassstab 1:2/1:5 Geprüft Freigegeben d Auftrags-Nr. Verwendungsbereich, Projekt Ohne sep. Stückliste Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Format A4 a 4 3 Blatt / Anz. 1/1 Index Zeichnungs-Nr. Glashalteprofil oben GH 106x39 WEB-114 5 Plotdatum: 15.09.2015 c B b Art.-Nr. a b c d roh lackiert 3721-055 67.0 55.4 32.0 19.5 ab Lager Termin n. Abspr. Detailzeichnung C Art.-Nr. 3721-055 a 67.0 C b 55.4 c 32.0 d 19.5 roh ab Lager lackiert Termin nach Absprache CAD-System: SolidWorks Art.-Nr. T +41 (0)55 240 84 52 Seite 57 F +41 (0)55 240 84 55 [email protected] Fosbergstrasse 16 We reserve all rights in this document and its subject matter. herby acknowledges these rights and assures the use of this www.ecolite.ch CH-8633 WolfhausenThe recipient ECOLITE AG document only for the purpose it was delivered. 3 5 4 © ECOLITE AG 6 Tragprofil vertikal GH 114/35 A b c B Fussdetail d a var. d Kopfdetail Art.-Nr. 3 3720-035 Art.-Nr. 3720-035 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this a b c d roh document only for lackiert the purpose it was delivered. Detailzeichnung © ECOLITE AG 114.0 35.0 4 60.0 27.0 5 ab Lager a 114.0 b 35.0 c 60.0 d 27.0 Tragprofil seitlich GH 50/50 Termin n. Abspr. roh ab Lager 6 C lackiert Termin nach Absprache A Datum Name Änderung Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Kopfdetail Auftrags-Nr. b Verwendungsbereich, Projekt Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Sep. Stückliste anderer Nr. Web-Site Ursprung Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Zeichnungs-Nr. Tragprofil vertikal GH 114/35 WEB-115 var. c a Status 4 3 Blatt / Anz. 1/1 Index Plotdatum: 16.09.2015 B 5 d Art.-Nr. a b c d roh lackiert 3723-050 50.0 51.5 15.0 25.0 ab Lager Termin n. Abspr. Art.-Nr. 3723-050 Änd. Datum a 50.0 Name b 51.5 Änderung c 15.0 d 25.0 Erstellt roh ab Lager Detailzeichnung C lackiert Termin nach Absprache Roger Mingard Massstab CAD-System: SolidWorks Änd. gentum. Es darf ohne unsere ausdrückliche Genehmigung tet, noch an Dritte weitergegeben werden. Zuwiderhandlung lgt. Copyright reserved! © ECOLITE AG We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 3800-000 System ZF 1 Änd. Datum Name Änderung 2 Geprüft Erstellt T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 3 15.10.2015 Joel Studer Seite 58 4 An dieser Stelle werden wir Ihnen baldmöglichst die entsprechende Systembeschreibung anzeigen. Wir arbeiten daran. A A B B C C D D E E Massstab ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen migung handlung G 3 T +41 (0)55 240 84 52 Seite 59 F +41 (0)55 240 84 55 [email protected] We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this www.ecolite.ch document only for the purpose it was delivered. © ECOLITE AG 5 4 6 Tragprofil ZF A c a b B We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this Detailzeichnung document onlylackiert for the purpose it was delivered. © ECOLITE AG Art.-Nr. a b c roh 33810-026 99.8 4 26.6 59.8 5 ab Lager 3810-026 Änd. 99.8 b Datum Name 6 C b 26.6 c 59.8 Änderung roh ab Lager lackiert Termin nach Absprache A Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für a c Sep. Stückliste gleicher Nr. Format A4 1/1 Index Zeichnungs-Nr. Tragprofil ZF WEB-170 4 3 Blatt / Anz. 5 B Plotdatum: 15.09.2015 Art.-Nr. a b c roh lackiert Detailzeichnung 3811-026 74.9 26.6 54.9 ab Lager Termin n. Abspr. C Änd. Datum a 74.9 Name Änderung b 26.6 c 54.9 Erstellt Geprüft Freigegeben roh ab Lager lackiert Termin nach Absprache Roger Mingard Massstab 1:2/1:5 s Art.-Nr. 3811-026 CAD-System: SolidWorks Abschlusstragprofil ZF Art.-Nr. a Termin n. Abspr. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 6 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen Seite 60 A Halter oben ZF var c b . a 6 Art.-Nr. a b c roh lackiert 3814-041 35.8 41.2 33.3 ab Lager Termin n. Abspr. Halter ZF a 35.8 Name b 41.2 c 33.3 Änderung b a Verwendungsbereich, Projekt Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Halter oben ZF 35.8 42.3 b 4 3 Massstab 1:2 6 Status Web-Site 3813-042 Roger Mingard We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of thisB document only for the purpose it was delivered. © ECOLITE AG Auftrags-Nr. 5 Sep. Stückliste gleicher Nr. a Termin nach Absprache . Freigegeben 4 Art.-Nr. A lackiert var Geprüft 3 Ohne sep. Stückliste roh ab Lager Erstellt c Datum Detailzeichnung C Art.-Nr. 3814-041 Änd. 5 4 Format A4 Zeichnungs-Nr. c roh 33.3 ab Lager WEB-174 Termin n. Abspr. lackiert Blatt / Anz. 1/1 Index Detailzeichnung 5 CAD-System: SolidWorks 3 B We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG A Plotdatum: 16.09.2015 Halter unten ZF c 33.3 Datum Name Änderung roh lackiert vaabr Lager . Termin nach Absprache Roger Mingard Erstellt Massstab B 1:2 Geprüft Freigegeben CAD-System: SolidWorks b 42.3 b Änd. a 35.8 c Art.-Nr. 3813-042 C Auftrags-Nr. a Verwendungsbereich, Projekt Ohne sep. Stückliste Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Art.-Nr. a 3812-041 35.8 Halter41.7 ZF b A4 Zeichnungs-Nr. WEB-173 c roh lackiert 33.3 ab Lager Termin n. Abspr. 4 3 Format 5 Blatt / Anz. 1/1 Index Detailzeichnung Plotdatum: 16.09.2015 C Art.-Nr. 3812-041 a 35.8 b 41.7 c 33.3 roh ab Lager lackiert Termin nach Absprache The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 6 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 61 A Klemme Abschlussprofil ZF a var c . b B Art.-Nr. a b c roh lackiert Detailzeichnung 3815-031 7.1 31.0 6.0 ab Lager Termin n. Abspr. C Änd. Datum a 7.1 Name b 31.0 Änderung c 6.0 roh ab Lager lackiert Termin nach Absprache Roger Mingard Erstellt Massstab 1:2 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Zeichnungs-Nr. Klemme Abschlussprofil ZF 3 4 WEB-175 5 Blatt / Anz. 1/1 Index Plotdatum: 16.09.2015 CAD-System: SolidWorks Art.-Nr. 3815-031 ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 4000-000 Steckprofile An dieser Stelle werden wir Ihnen baldmöglichst die entsprechenden Systemzeichnungen anzeigen. Wir arbeiten daran. Seite 62 Seite 63 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG F-Steckprofil 3 5 4 6 b c a A d B a Art.-Nr. 4009-002 4009-002 4011-002 4010-002 4012-002 4011-002 4013-002 4012-002 4020-003 4013-002 4020-003 4032-004 4032-004 4033-004 4033-004 4034-004 4034-0043 4040-008 4040-008 25.0 18.0 25.0 25.0 25.0 18.0 25.0 50.0 25.0 a 25.0 50.0 18.0 25.0 25.0 25.0 18.0 25.0 50.0 25.0 b 23.0 30.0 70.0 25.0 30.0 11.0 30.0 60.0 40.0 b 23.0 70.0 30.0 70.0 25.0 30.0 11.0 30.0 60.0 40.0 c d 35.0 45.0 45.0 23.0 40.0 50.0 55.6 70.0 4 60.0 c 2.0 35.0 2.6 60.0 2.6 45.0 2.0 45.0 3.6 23.0 40.0 4.0 50.0 4.5 55.6 4.3 70.0 8.6 60.0 roh d ab 2.0Lager ab 2.6Lager ab 2.6Lager ab 2.6Lager ab 2.0Lager 3.6Lager ab 4.0Lager ab 4.5Lager ab 4.3Lager 5 ab 8.6 lackiert F-Abschlussprofil Änd. Datum Name Änderung Detailzeichnung roh lackiert Termin n. Abspr. Termin in Absprache ab Lager Termin n. Abspr. Termin in Absprache ab Lager Termin n. Abspr. Termin in Absprache ab Lager Termin n. Abspr. Termin in Absprache ab Lager Termin n. Abspr. Termin in Absprache ab Lager ab Lager Termin n. Abspr. Termin in Absprache Termin in Absprache ab Lager We reserve all rights in this document and its subject matter. Termin n. Abspr. The recipient herby acknowledges these rights and assures the use of this Termin in Absprache ab Lager document only for the purpose it was delivered. © ECOLITE AG C Termin n. Abspr. Termin in Absprache 6 ab Lager Termin n. Abspr. Termin in Absprache ab Lager Roger Mingard Erstellt Massstab Freigegeben b Auftrags-Nr. Status Verwendungsbereich, Projekt Ohne sep. Stückliste Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. F-Steckprofil Blatt / Anz. 1/1 WEB-073-03 4 3 A 1:2/1:5 Geprüft 5 Index CAD-System: SolidWorks Art.-Nr. c ung dlung Fosbergstrasse 16 CH-8633 Wolfhausen a ung dlung T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Plotdatum: 19.08.2015 B d Art.-Nr. a b c d roh lackiert 4031-004 14.5 20.0 45.0 4.4 ab Lager Termin n. Abspr. Detailzeichnung C T +41 (0)55 240 84 52 Seite 64 F +41 (0)55 240 84 55 We reserve all rights in this document and its subject matter. [email protected] The recipient herby acknowledges these rights and assures the use of this www.ecolite.ch document only for the purpose it was delivered. © ECOLITE AG ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen ng lung 3 5 4 6 U-Abschlussprofil A c a b B d a 4030-004 18.0 4041-008 35.0 Art.-Nr. 4030-004 4041-008 Änd. Datum b c d roh lackiert 8.0 50.0 4.2 ab Lager Termin n. Abspr. 13.5 60.0 8.6 ab Lager Termin n. Abspr. a 18.0 35.0 Name b 8.0 13.5 c 50.0 60.0 Änderung d 4.2 8.6 Detailzeichnung roh ab Lager ab Lager lackiert Termin in Absprache Termin in Absprache Roger Mingard Erstellt Massstab 1:2/1:5 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Freigegeben Format A4 Zeichnungs-Nr. U-Abschlussprofil 3 4 C Blatt / Anz. 1/1 WEB-074-03 5 Index Plotdatum: 19.08.2015 CAD-System: SolidWorks Art.-Nr. ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 65 4050-000 System ProdEX We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG tum. Es darf ohne unsere ausdrückliche Genehmigung noch an Dritte weitergegeben werden. Zuwiderhandlung Copyright reserved! © ECOLITE AG 3 2 1 An dieser Stelle werden wir Ihnen baldmöglichst die entsprechende Systembeschreibung anzeigen. Wir arbeiten daran. 4 A A B B C C D D E E Änd. Datum Name Änderung Erstellt 09.10.2015 Joel Studer Massstab ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG migung handlung G 3 5 4 6 ProdEX-Profil A d b Dimension der Fassadenplatte c a B a b c 4050-004 29.5 37.5 25.0 4052-008 30.2 37.5 Art.-Nr. 32.1 4050-004 4056-020 40.1 4052-008 4058-030 41.0 4054-012 4056-020 3 4058-030 25.0 a 37.5 29.5 37.5 30.2 37.5 32.1 40.1 41.0 4054-012 d b 25.0 37.5 25.0 37.5 25.0 37.5 37.5 4 37.5 ProdEX-Abschlussprofil Änd. Datum Name roh lackiert 4.0 ab Lager Termin n. Abspr. 8.0 ab Lager Termin n. Abspr. 12.0 ab Lager c 25.0 20.0 25.0 30.0 25.0 25.0 25.0 Änderung d 4.0 ab Lager 8.0 ab Lager 12.0 20.0 30.0 roh lackiert Termin nach Absprache ab Lager Termin n. Abspr. Termin nach Absprache ab Lager We reserve all rights in this document and its subject matter. Termin n.herby Abspr. Theab recipient acknowledges rights and assures the use of this Termin nachthese Absprache Lager C document only for the purpose it was delivered. © ECOLITE AG Termin nach Absprache ab Lager 5 6 Termin nach Absprache ab Lager Termin n. Abspr. Roger Mingard Erstellt d Detailzeichnung Massstab 1:2/1:5 Geprüft Freigegeben Dimension der Fassadenplatte Verwendungsbereich, Projekt Ohne sep. Stückliste Auftrags-Nr. Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Zeichnungs-Nr. ProdEX-Profil c 3 Freigegeben 1/1 WEB-076-03 4 a Blatt / Anz. 5 Index A CAD-System: SolidWorks Art.-Nr. b migung handlung G Seite 66 Plotdatum: 19.08.2015 B Art.-Nr. a b c 4053-008 30.2 37.5 25.0 4055-012 32.1 37.5 25.0 4057-020 40.1 25.0 20.0 Art.-Nr. 41.0 4059-030 4053-008 4055-012 4057-020 4059-030 37.5 a 37.5 30.2 32.1 40.1 41.0 b 25.0 37.5 37.5 37.5 37.5 d roh lackiert 8.0 ab Lager Termin n. Abspr. 12.0 ab Lager Termin n. Abspr. ab Lager Termin n. Abspr. c 30.0 25.0 25.0 25.0 25.0 ab dLager 8.0 12.0 20.0 30.0 Detailzeichnung rohn. Abspr. Termin ab Lager ab Lager ab Lager ab Lager lackiert Termin nach Absprache Termin nach Absprache Termin nach Absprache Termin nach Absprache C T +41 (0)55 240 84 52 Seite 67 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch We reserve all rights in this document and its subject matter. ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen ehmigung erhandlung AG The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 6 ProdEX-Profil vertikal A c d a b Dimension der Fassadenplatte B a b 4 c 4062-008 30.2 37.5 d 25.0 roh 5 ab Lager 8.0 lackiert Detailzeichnung 6 Termin n. Abspr. ProdEX-Eckprofil ca Art.-Nr. 4062-008 b 37.5 30.2 Datum Name c 25.0 roh ab Lager d 8.0 Änderung Termin nach Absprache Roger Mingard Freigegeben Auftrags-Nr. Status Verwendungsbereich, Projekt Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für b B Freigegeben Format A4 Zeichnungs-Nr. ProdEX-Profil vertikal Art.-Nr. 3 4060-018 a b 58.8 58.8 4c 1.8 Massstab 1:2/1:5 Geprüft Ohne sep. Stückliste C lackiert Erstellt a Änd. A Blatt / Anz. 1/1 WEB-079-03 roh 5 lackiert ab Lager Termin n. Abspr. Index Plotdatum: 20.08.2015 Detailzeichnung C Änd. Datum a 58.8 Name b 58.8 Änderung c 1.8 roh ab Lager lackiert Termin in Absprache Roger Mingard Erstellt Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Ersatz für Massstab 1:2/1:5 Geprüft Freigegeben Format A4 Blatt / Anz. 1/1 m: SolidWorks Art.-Nr. 4111-018 CAD-System: SolidWorks Art.-Nr. 3 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 4100-000 Eckprofile An dieser Stelle werden wir Ihnen baldmöglichst die entsprechenden Systemzeichnungen anzeigen. Wir arbeiten daran. Seite 68 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 3 Seite 69 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 5 4 6 Eckprofil 42/42/2.0 A x a Dimension der Fassadenplatte maximal 8mm B x c b Art.-Nr. a b c roh 4110-020 42.0 42.0 2.0 ab Lager 3 lackiert Detailzeichnung We reserve all rights in this document and its subject matter. The recipient acknowledges these rights and assures the use of this Terminherby n. Abspr. document only for the purpose it was delivered. © ECOLITE AG 5 4 6 Eckprofil 34/34/2.7 Art.-Nr. 4110-020 a 42.0 x C b 42.0 c 2.0 roh ab Lager c Änd. Datum Name Änderung Auftrags-Nr. Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für 1:1 Freigegeben Format A4 Zeichnungs-Nr. Eckprofil 42x42x2.0 Blatt / Anz. 1/1 WEB-081-03 x b 3 Massstab Freigegeben Verwendungsbereich, Projekt a Roger Mingard Erstellt A Geprüft Dimension der Fassadenplatte maximal 4mm Ohne sep. Stückliste lackiert Termin in Absprache 4 5 Index CAD-System: SolidWorks g B Plotdatum: 21.08.2015 Art.-Nr. a b c roh lackiert Detailzeichnung 4112-027 34.0 34.0 2.7 ab Lager Termin n. Abspr. C Art.-Nr. 4112-027 Änd. Datum a 34.0 Name Änderung b 34.0 c 2.7 Erstellt Geprüft roh ab Lager lackiert Termin in Absprache Roger Mingard Massstab ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 4200-000 Sonderprofile An dieser Stelle werden wir Ihnen baldmöglichst die entsprechenden Systemzeichnungen anzeigen. Wir arbeiten daran. Seite 70 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG Dieses Dokument ist unser geistiges Eigentum. Es darf ohne unsere ausdrückliche Genehmigung weder kopiert, vervielfältigt oder verwertet, noch an Dritte weitergegeben werden. Zuwiderhandlung ist strafbar und wird strafrechtlich verfolgt. Copyright reserved! © ECOLITE AG Fugenprofil 32/4.3 3 2 1 Seite 71 5 4 6 b c A A Län 5 a ge B B Minimale Fugenbreite Dimension der Fassadenplatte d Art.-Nr. a b 4215-025 32.1 4.3 4215-030 32.1 4.3 4215-125 32.1 4.3 4215-130 32.1 a 32.1 d 32.1 4.0 32.1 32.1 0.8 Änd. 4.0 Name 0.8 4.3 b 4215-030 c 4215-025 0.8 4215-130 4215-125 4.0 Datum 0.8 c 4.3 Länge 4.3 2500mm 4.3 4.3 3000mm Änderung 4.0 d 0.8 0.8 0.8 0.8 Länge 4.0 Oberfläche 4.0 roh 4.0 4.0 roh 2500mm RAL 9005* Erstellt 3000mm Geprüft Oberfläche 3000mm roh Detailzeichnung 2500mm roh 3000mm RAL 9005 2500mm RAL 9005 C Roger Mingard Massstab 2:1/1:1 RAL 9005* Freigegeben Auftrags-Nr. Fugenprofil 32/7.3 2 b 1 3 Sep. Stückliste gleicher Nr. Web-Site Sep. Stückliste anderer Nr. Sach4 / Artikel-Nr. Benennung Ursprung document only for the purpose it was delivered. 5Ersatz für Fugenprofil 32x4.3 2 1/1 WEB-086-04 4 3 A4 6 Zeichnungs-Nr. 5 A Län a ge B Minimale Fugenbreite Dimension der Fassadenplatte d a b 4216-030 32.8 7.3 4216-130 32.8 7.3 a 32.8 32.8 32.8 32.8 Änd. * RAL 9005, tiefschwarz, seidenglanz c 0.8 0.8 Datum Name b 7.3 d 7.3 8.0 7.3 7.3 8.0 c 0.8 Länge 0.8 3000mm 0.8 0.8 3000mm Änderung d Länge 2500mm 8.0 Oberfläche 3000mm 8.0 roh 2500mm 8.0 3000mm 8.0 RAL 9005* Erstellt Oberfläche roh roh RAL 9005 RAL 9005 Detailzeichnung Roger Mingard Massstab 2:1/1:1 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Fugenprofil 32x7.3 C Format A4 Zeichnungs-Nr. WEB-098 Blatt / Anz. 1/1 Index CAD-System: SolidWorks Art.-Nr. Art.-Nr. 4216-025 4216-030 4216-125 4216-130 Index Plotdatum: 07.09.2015 c 5 1 Status We reserve all rights in this document and its subject matter. Freigegeben The recipient herby acknowledges these rights and assures the use of this Format Blatt / Anz. © ECOLITE AG Verwendungsbereich, Projekt Ohne sep. Stückliste ument ist unser geistiges Eigentum. Es darf ohne unsere ausdrückliche Genehmigung ert, vervielfältigt oder verwertet, noch an Dritte weitergegeben werden. Zuwiderhandlung und wird strafrechtlich verfolgt. Copyright reserved! © ECOLITE AG D CAD-System: SolidWorks Art.-Nr. C ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 9000-000 Profilverbinder An dieser Stelle werden wir Ihnen baldmöglichst die entsprechenden Systemzeichnungen anzeigen. Wir arbeiten daran. Seite 72 ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch Seite 73 Profilverbinder mit Rundloch für Omega-/Z-Profil We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 a 6 c b A Änd. 9010-075 a 10.0 a 15.0 10.0 20.0 15.0 25.0 20.0 30.0 35.0 25.0 40.0 30.0 45.0 35.0 50.0 40.0 55.0 45.0 70.0 50.0 75.0 55.0 85.0 70.0 90.0 75.0 3.0 9010-085 85.0 3.0 145.0 90.0 3.0 145.0 Datum 9010-090 Name b 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 b 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 Änderung c 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 c 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 145.0 Erstellt roh ab Lager ab Lager ab Lager ab Lager ab Lager ab Lager ab Lager ab Lager ab Lager ab Lager ab Lager ab Lager roh lackiert Termin nach Absprache ab Lager B lackiert Termin nach Absprache Detailzeichnung ab Lager Termin n. Abspr. Termin nach Absprache ab Lager Termin nach Absprache Termin n. Abspr. ab Lager Termin nach Absprache Termin n. Abspr. ab Lager Termin nach Absprache ab Lager Termin n. Abspr. Termin nach Absprache ab Lager Termin n. Abspr. Termin nach Absprache ab Lager Termin n. Abspr. Termin nach Absprache ab Lager Termin n. Abspr. Termin nach Absprache ab Lager Termin n. Abspr. Termin nach Absprache ab Lager C Termin n. Abspr. Termin nach Absprache ab Lager Termin n. Abspr. Termin nach Absprache ab Lager Termin n. Abspr. Termin nach Absprache ab Lager Termin n. Abspr. ab Lager Termin n. Abspr. ab Lager Termin n. Abspr. Geprüft Roger Mingard Massstab 1:1/1:2 Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Profilverbinder mit Rundloch für Omega-/Z-Profil 3 4 5 Zeichnungs-Nr. WEB-120 Blatt / Anz. 1/1 Index Plotdatum: 25.08.2015 CAD-System: SolidWorks Art.-Nr. 9010-010 Art.-Nr. 9010-015 9010-010 9010-020 9010-015 9010-025 9010-020 9010-030 9010-035 9010-025 9010-040 9010-030 9010-045 9010-035 9010-050 9010-040 9010-055 9010-045 9010-070 9010-050 9010-075 9010-055 9010-085 9010-070 9010-090 T +41 (0)55 240 84 52 F +41 (0)55 240 84 55 [email protected] Fosbergstrasse 16 CH-8633 Wolfhausen We reserve all rights in thiswww.ecolite.ch document and its subject matter. Seite 74 ECOLITE AG The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG 3 5 4 6 Profilverbinder mit Ohren für Omega-/Z-Profil A b c a B G d. Datum Art.-Nr. a 20.0 9020-020 20.8 9020-021 25.0 9020-025 30.0 9020-030 40.0 9020-040 45.0 9020-045 50.0 9020-050 55.0 9020-055 85.0 20.0 20.8 25.0 30.0 40.0 45.0 50.0 55.0 9020-085 Name b 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 a 85.0 cc 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 b 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3 lackiert lackiert Detailzeichnung Termin nach Absprache ab Lager ab Lager Termin n. Abspr. Termin nach Absprache ab Lager ab Lager Termin n. Abspr. Termin nach Absprache ab Lager ab Lager Termin n. Abspr. Termin nach Absprache ab Lager ab Lager Termin n. Abspr. Termin nach Absprache ab Lager ab Lager Termin n. Abspr. Termin nach Absprache ab Lager C ab Lager Termin n. Abspr. Termin nach Absprache ab Lager ab Lager Termin n. Abspr. Termin nach Absprache ab Lager ab Lager Termin n.document Abspr. reserve allTermin rights in this nach Abspracheand its subject matter. ab Lager We The recipient herby acknowledges these rights and assures the use of this 100.0 4 Änderung rohroh ab Lager document onlyTermin n. Abspr. for the purpose it was delivered. 5 Erstellt © ECOLITE AG 6 Roger Mingard Massstab 1:1/1:2 Geprüft Freigegeben Profilverbinder für Doppel-Tragprofil UB Auftrags-Nr. Verwendungsbereich, Projekt e sep. Stückliste Web-Site Ursprung Sach- / Artikel-Nr. Benennung Ersatz für Stückliste gleicher Nr. . Stückliste anderer Nr. a Status Format A4 c Profilverbinder mit Ohren für Omega-/Z-Profil 4 WEB-150 5 1/1 Index Zeichnungs-Nr. A Plotdatum: 08.09.2015 b 3 Blatt / Anz. CAD-System: SolidWorks Art.-Nr. 9020-020 9020-021 9020-025 9020-030 9020-040 9020-045 9020-050 9020-055 hmigung 9020-085 rhandlung B Art.-Nr. a b c roh lackiert Detailzeichnung 9050-060 15.0 60.0 145.0 ab Lager Termin n. Abspr. C Art.-Nr. 9050-060 a 15.0 b 60.0 c 145.0 roh ab Lager lackiert Termin nach Absprache T +41 (0)55 240 84 52 ECOLITE AG Seite 75 We reserve all rights inFthis document its subject matter. +41 (0)55and240 84 55 The recipient herby acknowledges these rights and assures the use of this [email protected] Fosbergstrasse 16 document only for the purpose it was delivered. © ECOLITE AG 3 CH-8633 Wolfhausen 5 4 www.ecolite.ch 6 Profilverbinder 120mm für HM-/MM-/Rogger-Profil A b a c B Art.-Nr. 3 Art.-Nr. 9030-039 a 9030-039 39.0 b 4 4.5 We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG c 120.0 5 roh lackiert Detailzeichnung ab Lager Termin n.6 Abspr. Profilverbinder 145mm für HM-/MM-/Rogger-Profil a 39.0 b 4.5 c 120.0 roh ab Lager lackiert A C Termin in Absprache b Datum Name Änderung Roger Mingard Erstellt c Geprüft Massstab 1:1/1:2 Freigegeben Sep. Stückliste anderer Nr. Verwendungsbereich, Projekt Status Web-Site Ursprung Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Profilverbinder 120mm für HM-/MM-/Rogger-Profil 4 3 WEB-140 5 a b c roh lackiert 9031-069 39.0 4.5 145.0 ab Lager Termin n. Abspr. Datum a 39.0 Name b 4.5 Änderung c 145.0 roh ab Lager Erstellt C Termin in Absprache Roger Mingard Massstab 1:1/1:2 Freigegeben Auftrags-Nr. Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Profilverbinder 145mm für HM-/MM-/Rogger-Profil Index Detailzeichnung lackiert Geprüft Ohne sep. Stückliste 1/1 Plotdatum: 25.08.2015 Art.-Nr. Art.-Nr. 9031-039 Änd. Zeichnungs-Nr. B / Anz. Blatt Format A4 Zeichnungs-Nr. WEB-141 Blatt / Anz. 1/1 Index CAD-System: SolidWorks Sep. Stückliste gleicher Nr. a Auftrags-Nr. Ohne sep. Stückliste CAD-System: SolidWorks Änd. We reserve all rights in this document and its subject matter. T +41 (0)55 240 84 52 Seite 76 The recipient herby acknowledges these rights and assures the use of this documentFonly for the purpose it was delivered. © ECOLITE AG +41 (0)55 240 84 55 ECOLITE AG 3 [email protected] www.ecolite.ch Fosbergstrasse 16 5 CH-8633 Wolfhausen 4 6 A Anschlusswinkel HM-I/MM-A c b B c a Grundriss: Anschlusswinkel als HM-Innenecke oder MM-Aussenecke We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG g ng 3 5 4 6 Art.-Nr. a b c roh lackiert Detailzeichnung 9040-039 39.0 4.5 75.0 ab Lager Termin n. Abspr. A 4.5 b Änd. Datum c 75.0 roh ab Lager c Name Änderung lackiert Termin in Absprache Roger Mingard Erstellt Massstab 1:1/1:2 Geprüft Freigegeben Auftrags-Nr. Verwendungsbereich, Grundriss: Projekt Ohne sep. Stückliste Status als Web-SiteAnschlusswinkel HM-Aussenecke oder a MM-Innenecke A4 Ersatz für Sach- / Artikel-Nr. Benennung Sep. Stückliste anderer Nr. Format Ursprung c Sep. Stückliste gleicher Nr. 4 WEB-142 5 a b c roh lackiert 9041-039 39.0 4.5 75.0 ab Lager Termin n. Abspr. Änd. Datum a 39.0 Name b 4.5 Änderung c 75.0 Erstellt roh ab Lager Detailzeichnung C lackiert Termin in Absprache Roger Mingard Massstab 1:1/1:2 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für B Plotdatum: 25.08.2015 Art.-Nr. Art.-Nr. 9041-039 1/1 Index Zeichnungs-Nr. Anschlusswinkel HM-I/MM-A 3 Blatt / Anz. Format A4 Zeichnungs-Nr. Blatt / Anz. 1/1 Index AD-System: SolidWorks 39.0 CAD-System: SolidWorks a b Anschlusswinkel HM-A/MM-I Art.-Nr. 9040-039 C We reserve all rights in this document and its subject matter. The recipient herby acknowledges these rights and assures the use of this document only for the purpose it was delivered. © ECOLITE AG enehmigung widerhandlung TE AG 3 4 ECOLITE AG Fosbergstrasse 16 CH-8633 Wolfhausen 5 (0)55 240 84 52 T +41 F +41 (0)55 240 84 55 [email protected] www.ecolite.ch 6 Seite 77 A Verbindungsblech für Winkel-/T-Profil a b c B a b 9042-034Art.-Nr. 34.0 a160.0 34.0 160.0 42.0 160.0 56.0 9042-0429042-03442.0 9042-0569042-04256.0 9042-056 Änd. Datum Name c roh lackiert 4.5b c ab Lager Termin n. roh Abspr. 160.0 4.5 160.0 4.5 160.0 Änderung 4.5 ab Lager 4.5 ab Lager 4.5 Termin ab n. Lager Abspr. ab Lager Termin n. Abspr. ab Lager Detailzeichnung lackiert Termin nach Absprache Termin nach Absprache Roger Mingard Erstellt C Termin nach Absprache Massstab 1:1/1:2 Geprüft Freigegeben Auftrags-Nr. Ohne sep. Stückliste Verwendungsbereich, Projekt Status Sep. Stückliste gleicher Nr. Web-Site Ursprung Sep. Stückliste anderer Nr. Sach- / Artikel-Nr. Benennung Ersatz für Format A4 Verbindungsblech für Winkel-/T-Profil 3 4 5 Zeichnungs-Nr. WEB-130 Blatt / Anz. 1/1 Index Plotdatum: 25.08.2015 CAD-System: SolidWorks Art.-Nr.
© Copyright 2024 ExpyDoc