Stopfen
Die Stopfen der Firma Caplugs schützen Ihre
Bauteile vor Beschädigung oder Verschmutzung
und dies während des Transports und der
Lagerung. Die Stopfen sind als dauerhafte
Abdeckung und als Abdeckung für halbfertige
Bauteile geeignet. Tausende von Kunststoffstopfen
sind vorrätig und kurzfristig versandbereit.
Wählen Sie die benötigte Form, Größe, Material,
Farbe und Menge aus!
plugs
Caplugs plastic plugs protect fabricated
components from damage and contaminants
during shipping and storage. The plugs are
also designed to firmly conceal open ports
and unfinished edging. Thousands of plastic plugs
are in stock and ready to ship after selecting a
desired style, size, material, color and quantity.
400.000.000 Einzelteile am Lager
garantieren kurzfristige Lieferzeiten.
86
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
87
plugs
non-threaded
CPT Series
Center Pull-Tab Tapered Plugs
Center Pull-Tab Tapered Plugs
CPT Series pull-tab plugs have the same configuration
of standard tapered plugs, with an integral center
pull-tab feature which facilitates insertion and
removal of the plug.
Dimensions
Caplugs No.
• Ergonomically friendly to use
• Mimics standard tapered design
• Molded one piece part
Center
Pull Tab
B
A
• Can be used with O-ring fittings
D
Material: Low-Density Polyethylene Color: Red
.04
88
C
CPT-0
CPT-1
CPT-1X
CPT-2
CPT-2X
CPT-2XW
CPT-3
CPT-3X
CPT-4
CPT-4X
CPT-5
CPT-5X
CPT-6
CPT-6W-LT
CPT-6X
CPT-6XW
CPT-7
CPT-7X
CPT-8
CPT-8X
CPT-9
CPT-9LT
CPT-9Y
CPT-9X
CPT-10
CPT-11
CPT-12L
CPT-12
CPT-12X
CPT-13
CPT-13S
CPT-14
CPT-14S
CPT-14X
CPT-14Y
CPT-15
CPT-15X
CPT-15S
CPT-16
CPT-16X
CPT-16S
CPT-17
CPT-18
CPT-18X
CPT-19
CPT-19X
CPT-20
CPT-210S
CPT-221
CPT-24S
CPT-240
CPT-250
CPT-44S
CPT-500
CPT-501
A
In
.209
.239
.267
.299
.331
.330
.362
.392
.422
.465
.472
.500
.533
.549
.550
.580
.580
.610
.640
.678
.690
.690
.725
.727
.752
.803
.869
.869
.915
.967
1.026
1.093
1.100
1.150
1.179
1.224
1.235
1.292
1.312
1.344
1.360
1.451
1.563
1.633
1.735
1.760
1.797
1.820
2.067
2.230
2.300
2.425
2.698
2.850
3.320
B
mm
5.31
6.07
6.78
7.59
8.41
8.38
9.19
9.96
10.72
11.81
11.99
12.70
13.54
13.94
13.97
14.73
14.73
15.49
16.26
17.22
17.53
17.53
18.42
18.47
19.10
20.40
22.07
22.07
23.24
24.56
26.06
27.76
27.94
29.21
29.95
31.09
31.37
32.82
33.32
34.14
34.54
36.86
39.70
41.48
44.07
44.70
45.64
46.23
52.50
56.64
58.42
61.59
68.53
72.39
84.33
In
.269
.303
.335
.367
.397
.396
.428
.459
.486
.524
.548
.568
.608
.598
.631
.625
.688
.695
.727
.755
.788
.788
.770
.825
.849
.912
.973
.973
1.040
1.092
1.146
1.219
1.210
1.274
1.286
1.355
1.360
1.356
1.465
1.527
1.420
1.601
1.455
1.750
1.784
1.815
1.938
1.835
2.243
2.270
2.464
2.632
2.866
2.982
3.452
C
mm
6.83
7.70
8.51
9.32
10.08
10.06
10.87
11.66
12.34
13.31
13.92
14.43
15.44
15.19
16.03
15.88
17.48
17.65
18.47
19.18
20.02
20.02
19.56
20.96
21.56
23.16
24.71
24.71
26.42
27.74
29.11
30.96
30.73
32.36
32.66
34.42
34.54
34.44
37.21
38.79
36.07
40.67
36.96
44.45
45.31
46.10
49.23
46.61
56.97
57.66
62.59
66.85
72.80
75.74
87.68
In
.38
.47
.47
.50
.56
.73
.56
.59
.62
.76
.69
.72
.75
1.00
.75
.78
.84
.84
.88
.88
.94
.94
.86
1.00
1.00
1.06
1.12
1.12
1.16
1.25
1.34
1.41
1.34
1.55
1.44
1.50
1.53
1.50
1.62
1.75
1.72
1.75
1.91
1.94
1.94
2.81
2.16
2.03
2.44
2.50
2.66
2.88
2.97
3.28
3.62
D
mm
9.65
11.94
11.94
12.70
14.22
18.54
14.22
14.99
15.75
19.30
17.53
18.29
19.05
25.40
19.05
19.81
21.34
21.34
22.35
22.35
23.88
23.88
21.84
25.40
25.40
26.92
28.45
28.45
29.46
31.75
34.04
35.81
34.04
39.37
36.58
38.10
38.86
38.10
41.15
44.45
43.69
44.45
48.51
49.28
49.28
71.37
54.86
51.56
61.98
63.50
67.56
73.15
75.44
83.31
91.95
In
.34
.38
.41
.38
.38
.38
.38
.41
.41
.41
.47
.47
.47
.35
.47
.22
.53
.53
.47
.53
.56
.56
.22
.59
.59
.66
.72
.66
.72
.78
.75
.78
.50
.50
.75
.75
.75
.78
.75
.88
.53
.75
.72
.78
.50
.50
1.00
.50
1.03
.50
1.00
1.00
.50
.75
.75
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
mm
8.64
9.65
10.41
9.65
9.65
9.65
9.65
10.41
10.41
10.41
11.94
11.94
11.94
8.89
11.94
5.59
13.46
13.46
11.94
13.46
14.22
14.22
5.59
14.99
14.99
16.76
18.29
16.76
18.29
19.81
19.05
19.81
12.70
12.70
19.05
19.05
19.05
19.81
19.05
22.35
13.46
19.05
18.29
19.81
12.70
12.70
25.40
12.70
26.16
12.70
25.40
25.40
12.70
19.05
19.05
CPT Series
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
2500
500
2500
500
2500
500
5000
1000
1500
300
1500
300
1500
300
2500
500
2000
400
1500
300
1000
200
1000
200
1500
300
1000
200
1000
200
1500
300
1000
200
1000
200
1000
200
1000
200
3500
700
500
100
1000
200
350
70
1000
200
250
50
250
50
500
100
250
50
250
50
89
plugs
non-threaded
CPT-NF Series
Center Pull-Tab Tapered Plugs without Flange
Center Pull-Tab Tapered Plugs without Flange
CPT-NF Series pull-tab tapered plugs are ideal for use
in tight places or when two or more openings need to
be plugged close together and there is no room for a
flange.
Caplugs
No.
CPT-3NF
CPT-5XNF
CPT-6XNF
CPT-8XNF
CPT-9XNF
CPT-11NF
CPT-13NF
• Follows standard taper design
• Flangeless
• Easy to install and remove using tab feature
Material: Low-Density Polyethylene Color: Orange
CT Series
mm
9.19
12.70
14.00
17.22
18.47
20.40
24.56
In
.434
.573
.639
.760
.831
.918
1.097
mm
11.02
14.55
16.23
19.30
21.11
23.32
27.86
D
In
.34
.34
.25
.25
.25
.25
.25
• Raised pull tab for easy installation and removal
D
1/4
C
A
B
CT-4
CT-8
CT-12
CT-16
CT-20
CT-24
CT-28
CT-32
CT-36
CT-40
CT-44
CT-48
CT-52
Tubing O.D.
3/8
1/2
5/8
3/4
7/8
1-1/8
1-3/8
1-5/8
2-1/8
2-5/8
3-1/8
3-5/8
4-1/8
A
In
.320
.420
.540
.660
.780
1.020
1.260
1.500
1.970
2.450
2.930
3.410
3.890
B
• Color coded for size identification
Material: FlexTemp (Thermoplastic Rubber)
Color: See chart
In
.25
.38
.38
.50
.50
.50
.75
mm
8.13
10.67
13.72
16.76
19.81
25.91
32.00
38.10
50.04
62.23
74.42
86.61
98.81
In
.330
.440
.560
.690
.810
1.050
1.300
1.540
2.020
2.500
2.990
3.450
3.930
C
mm
8.38
11.18
14.22
17.53
20.57
26.67
33.02
39.12
51.31
63.50
75.95
87.63
99.82
In
.38
.38
.50
.62
.75
.88
1.00
1.00
1.00
1.00
1.00
1.00
1.00
mm
6.35
9.65
9.65
12.70
12.70
12.70
19.05
CT Series
Caplugs No.
ECP-3/8
ECP-M10
ECP-7/16
ECP-1/2
ECP-M12
ECP-M14
ECP-M16
ECP-M18
ECP-M20
ECP-M22
ECP-M24
ECP-M27
ECP-1-1/2
Color
Blue
Green
Yellow
Natural
Red
Orange
Black
Blue
Red
Yellow
Orange
Black
Green
A
In
.342
.367
.397
.450
.441
.520
.598
.663
.748
.833
.888
1.012
1.420
B
mm
8.67
9.33
10.08
11.53
11.20
13.20
15.20
16.86
19.01
21.18
22.58
25.72
36.07
In
.35
.38
.41
.46
.45
.53
.61
.67
.76
.84
.90
1.03
1.44
mm
8.89
9.58
10.41
11.68
11.45
13.45
15.45
17.06
19.25
21.25
22.80
26.10
36.58
Dimensions
C
In
.58
.59
.64
.67
.67
.75
.83
.88
.97
1.05
1.10
1.22
1.74
mm
9.65
9.65
12.70
15.75
19.05
22.35
25.40
25.40
25.40
25.40
25.40
25.40
25.40
In
.38
.50
.63
.75
.88
1.13
1.38
1.63
2.13
2.63
3.13
3.63
4.13
mm
9.65
12.70
16.00
19.05
22.35
28.70
35.05
41.40
54.10
66.80
79.50
92.20
104.90
D
mm
14.73
15.00
16.26
17.02
17.00
19.00
21.00
22.40
24.60
26.70
28.00
31.10
44.20
Packaging
Carton
Mini Pak
Quantity
Quantity
7500
1500
7500
1500
9000
1800
5000
1000
3000
600
1500
300
1000
200
700
140
500
100
250
50
200
40
100
20
250
50
D
Ergonomic Center Pull-Tab Plugs
Ergonomic Center Pull-Tab Plugs
• Fit all metric thread pitches for the given diameter
mm
8.64
8.64
6.35
6.35
6.35
6.35
6.35
Dimensions
Caplugs No.
Material: Low-Density Polyethylene Color: Blue
ECP Series ergonomic center pull-tab plugs offer the
convenience of a center-pull tab plug in an ergonomic
material. This series is an excellent alternative to
threaded plugs because it saves time and labor during
installation and removal of plugs. The tab is molded fully
into the end and sidewalls of the plug so it does not
break off during plug removal.
Packaging
Carton
Mini Pak
Quantity Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
1500
300
E
Plugs for Type L and Type M Tubing
• Durable
90
In
.362
.500
.551
.678
.727
.803
.967
Dimensions
C
In
mm
.41
10.41
.47
11.94
.50
12.70
.53
13.46
.59
14.99
.66
16.76
.78
19.81
B
Plugs for Type L and Type M Tubing
CT Series plugs protect Type L and M copper tubing.
A tapered body with reinforced cross-braces provides
exceptional protection for the tube configuration.
ECP Series
A
CPT-NF Series
In
.28
.27
.28
.28
.27
.31
.31
.34
.35
.39
.38
.46
.50
ECP Series
E
mm
7.11
7.00
7.11
7.11
7.00
8.00
8.00
8.70
8.80
10.00
9.70
11.70
12.70
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
In
.40
.39
.40
.40
.39
.39
.39
.39
.38
.39
.39
.39
.40
mm
10.16
10.00
10.16
10.16
10.00
10.00
10.00
10.00
9.70
10.00
10.00
10.00
10.16
Packaging
Carton Mini Pak
Quantity Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
4000
800
4000
800
3000
600
2000
400
91
plugs
non-threaded
CXT Series
Center Cross Pull-Tab Plug
Center Cross Pull-Tab Plug
The CXT Series tapered plugs have the same
configuration and dimensions of standard tapered
plugs but with an integral cross-design pull tab which
facilitates insertion and removal of the plug. The tab
extends well above the plug body, making it easy to
grasp. Since the tab is molded fully into the end and
side walls of the plug, it will not break off during plug
removal. Additionally, the cross tabs and wide flange
design prevent final connections being made without
first remove the plug.
Caplugs No.
A
B
In
1.202
1.312
1.519
2.638
CXT-21
CXT-23
CXT-26
CXT-44F
mm
30.53
33.32
38.58
67.01
In
1.297
1.465
1.602
2.759
mm
32.94
37.21
40.69
70.08
Dimensions
C
In
mm
1.880
47.750
2.000
50.800
2.250
55.130
3.120
79.250
CXT Series
D
In
1.000
1.000
1.000
1.000
E
mm
25.40
25.40
25.40
25.40
In
.750
.660
.750
.690
mm
19.05
16.76
19.05
17.53
Packaging
Carton
Quantity
500
500
500
500
Material: Low-Density Polyethylene Color: Orange
WPT Series
Extra-Wide Flange Center Pull Tab
Caplugs No.
• Tapered design
† 660 Series
• Pull tab feature
Material: Low-Density Polyethylene Color: Orange
Note: “B” dimension should be at least .02" more than diameter
to be plugged. Larger diameters may require
Flange
more interference.
Thickness
D
Flange
Thickness
D
C
C
A
B
A
B
–
–
1/2
–
3/4
–
–
–
–
–
1-1/4
–
2
–
9/16
11/16
–
7/8
–
1-1/16
–
1-15/16
–
–
1-5/8
–
–
–
Metric
Hole
–
M18 x 1.5
–
M24
–
M27 x 2
–
M33 x 2/M36
–
–
–
–
–
–
1/2
5/8
3/4
–
1
–
–
–
1-1/4
1-1/2
–
–
2
2-1/2
Dimensions — To Plug Thread Sizes
A
B
In
mm
In
mm
.480
12.19
.540
13.72
.590
14.99
.647
16.43
.730
18.54
.790
20.07
.752
19.10
.849
21.56
.980
24.89
1.040
26.42
.921
23.39
1.075
27.31
1.069
27.15
1.188
30.18
1.202
30.53
1.297
32.94
1.230
31.24
1.290
32.77
1.460
37.08
1.550
39.37
1.519
38.58
1.602
40.69
1.807
45.90
1.932
49.07
1.960
49.78
2.050
52.07
2.460
62.48
2.550
64.77
C
In
.53
.50
.50
.50
.53
.75
.69
.75
.50
.75
.75
.75
.75
.75
mm
13.46
12.70
12.70
12.70
13.46
19.05
17.53
19.05
12.70
19.05
19.05
19.05
19.05
19.05
In
1.25
1.06
1.50
1.31
1.88
1.62
1.73
1.88
2.00
2.38
2.25
2.53
2.75
3.25
NPT Plugs
Caplugs
No.
Material: Low-Density Polyethylene Color: Orange
B
A
E
C
D
EZP-151
EZP-152
EZP-153
EZP-154
EZP-155
EZP-156
EZP-157
EZP-162
EZP-163
NPT
Thread
Size
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
A
In
.331
.422
.550
.691
.870
1.093
1.450
1.742
2.232
B
mm
8.41
10.72
13.97
17.55
22.10
27.76
36.83
44.25
56.69
In
.397
.486
.640
.787
.974
1.219
1.585
1.822
2.262
mm
10.08
12.34
16.26
19.99
24.74
30.96
40.26
46.28
57.45
Dimensions
C
In
mm
.28
7.11
.29
7.37
.50
12.70
.50
12.70
.62
15.75
.66
16.76
.75
19.05
.75
19.05
.86
21.84
D
In
.52
.61
.77
.91
1.09
1.34
1.72
2.03
2.47
WPT Series
D
NPT Plugs
EZP Series is designed to plug NPT fittings, but can
be used to protect a variety of items. The heavy-duty,
tapered, multi-use plug has a flange for easy insertion
and removal.
92
NPT/BSP Standard
WPT-662 †
WPT-242-WP
WPT-663 †
WPT-246-WP
WPT-664 †
WPT-248-WP
WPT-153-2-WP
WPT-250-WP
WPT-665 †
WPT-666 †
WPT-194-WP
WPT-196-3-WP
WPT-667 †
WPT-668 †
• Wide flange
EZP Series
Extra-Wide Flange Center Pull Tab
†660 Series have a tab flush with flange (see drawing)
WPT Series tapered plugs feature a center pull-tab
design that extends above the flange for easy removal.
The extra-wide flange protects more surface area.
mm
31.75
26.92
38.10
33.27
47.75
41.15
43.94
47.75
50.80
60.45
57.15
64.26
69.85
82.55
EZP Series
E
mm
13.21
15.49
19.56
23.11
27.69
34.04
43.69
51.56
62.74
In
.27
.36
.49
.62
.80
1.02
1.37
1.66
2.15
Packaging
Carton Mini Pak
Quantity Quantity
5000
1000
5000
1000
3000
600
2500
500
1500
300
1500
300
1000
200
1000
200
1200
240
500
100
500
100
500
100
500
100
250
50
mm
6.88
9.19
12.45
15.77
20.32
25.98
34.80
42.21
54.66
Packaging
Carton
Mini Pak
Quantity Quantity
25000
5000
20000
4000
7500
1500
5000
1000
2500
500
1500
300
1000
200
500
100
500
100
.060
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
93
plugs
non-threaded
K Series
Plugs for Round Tubing
K Series plugs are specially designed for applications
where the outside diameter of the closure should not
exceed the outside diameter of the tubing. Flange sits
flush with outer wall of the tubing, providing positive
protection against moisture and debris.
Caplugs No.
K-2.5mm †
K-3
K-3S
K-RP-2
K-4
K-RP-3
K-5
K-6
K-RP-45
K-RP-5
K-8
K-10
K-RP-75
K-11S
K-12
K-12S
K-RP-9
• For Type K Copper Tubing
• Fit round tubing applications
Material: Low-Density Polyethylene Color: Red
Applicable Specs: NAS 843
L Series
94
B
mm
5.99
6.78
7.59
8.38
9.17
9.91
10.64
11.35
11.96
12.70
13.51
13.97
14.73
In
.160
.105
.105
.105
.160
.165
.227
.290
.290
.290
.411
.530
.550
.530
.650
.609
.734
B
mm
4.06
2.67
0.27
2.67
4.06
4.19
5.77
7.37
7.37
7.37
10.44
13.46
13.97
13.46
16.51
15.47
18.64
In
.165
.138
.138
.140
.202
.210
.272
.340
.330
.345
.466
.587
.640
.580
.712
.664
.834
mm
4.19
3.51
3.51
3.56
5.13
5.33
6.91
8.64
8.38
8.76
11.84
14.91
16.26
14.73
18.09
16.87
21.18
Dimensions
C
In
mm
.22
5.59
.19
4.83
.19
4.83
.19
4.83
.24
6.10
.25
6.35
.31
7.87
.37
9.40
.38
9.65
.38
9.65
.50
12.70
.62
15.75
.69
17.53
.67
17.02
.75
19.05
.73
18.54
.91
23.11
D
In
.12
.19
.06
.13
.14
.13
.14
.16
.13
.13
.16
.19
.13
.37
.19
.38
.13
In
.302
.335
.365
.396
.427
.456
.485
.513
.547
.576
.608
.631
.667
C
mm
7.67
8.51
9.27
10.06
10.85
11.58
12.32
13.03
13.89
14.63
15.44
16.03
16.94
E
mm
3.05
4.83
1.52
3.30
3.56
3.30
3.56
4.06
3.30
3.30
4.06
4.83
3.30
9.40
4.83
9.65
3.30
In
.26
.31
.31
.25
.38
.25
.38
.38
.54
.50
.38
.56
.50
.56
.56
.56
.62
In
.44
.47
.50
.53
.56
.59
.62
.66
.69
.72
.75
.75
.81
D
mm
11.18
11.94
12.70
13.46
14.22
14.99
15.75
16.76
17.53
18.29
19.05
19.05
20.57
In
.38
.38
.38
.38
.38
.38
.38
.38
.44
.44
.44
.47
.50
mm
9.65
9.65
9.65
9.65
9.65
9.65
9.65
9.65
11.18
11.18
11.18
11.94
12.70
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
L-7X
L-8
L-8W
L-8X
L-9
L-9X
L-10
L-11
L-11X
L-12
L-12X
L-13A
L-13
L-13X
L-14
L-14X
L-ST 250
L-15X
L-16
L-17
L-ST 254
L-18
L-18X
L-ST 255
L-19
L-20
L-210
L-21
A
In
.610
.640
.643
.675
.690
.725
.750
.802
.815
.866
.915
.960
.964
.995
1.094
1.175
1.179
1.235
1.312
1.447
1.451
1.560
1.630
1.633
1.750
1.780
1.844
1.900
B
mm
15.49
16.26
16.33
17.15
17.53
18.42
19.05
20.37
20.70
21.99
23.24
24.38
24.49
25.27
27.79
29.85
29.95
31.37
33.33
36.76
36.86
39.63
41.40
41.48
44.45
45.21
46.84
48.26
In
.695
.727
.726
.755
.788
.823
.848
.911
.930
.975
1.040
1.047
1.090
1.145
1.215
1.284
1.286
1.360
1.465
1.600
1.601
1.682
1.750
1.750
1.880
1.950
2.000
2.076
C
mm
17.65
18.47
18.44
19.18
20.02
20.91
21.54
23.14
23.62
24.77
26.42
26.59
27.69
29.08
30.86
32.61
32.66
34.55
37.21
40.64
40.67
42.72
44.45
44.45
47.75
49.53
50.80
52.73
In
.84
.88
1.03
.88
.94
.97
1.00
1.06
1.09
1.12
1.16
1.19
1.25
1.31
1.41
1.44
1.44
1.50
1.62
1.75
1.75
1.88
1.94
1.84
2.00
2.12
2.12
2.25
mm
6.60
7.87
7.87
6.35
9.65
6.35
9.65
9.65
13.72
12.70
9.65
14.22
12.70
14.22
14.22
14.22
15.75
In
.10
.08
.08
–
.14
–
.20
.26
–
–
.38
.50
–
.51
.62
.58
–
D
mm
21.34
22.35
26.16
22.35
23.88
24.64
25.40
26.93
27.69
28.45
29.47
30.23
31.75
33.28
35.82
36.58
36.58
38.10
41.15
44.45
44.45
47.75
49.28
46.74
50.80
53.85
53.85
57.15
In
.50
.50
.50
.50
.56
.56
.56
.62
.62
.62
.68
.50
.75
.75
.75
.62
.75
.81
.88
.88
.75
.75
.75
.75
.75
1.00
1.00
1.00
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
K Series
F
Dimensions
Caplugs No.
Dimensions
A
In
.236
.267
.299
.330
.361
.390
.419
.447
.471
.500
.532
.550
.580
A
mm
2.64
1.78
1.78
–
3.30
–
5.08
6.60
–
–
9.65
12.70
–
12.95
15.75
14.73
–
Lift-Tab Tapered Plugs
Material: Low-Density Polyethylene Color: Red
L-1
L-1X
L-2
L-2X
L-3
L-3X
L-4
L-4X
L-5
L-5X
L-6
L-6X
L-7
Will Plug SAE J-528
Tubing or O.D. Inches
–
3/16
3/16
3/16
1/4
1/4
5/16
3/8
3/8
3/8
1/2
5/8
11/16
5/8
3/4
–
29/32
Lift-Tab Tapered Plugs
L Series plugs have a tapered design with a lift-tab
feature to facilitate easy removal. Great for small size
openings and in tight areas where a side tab would
not be preferred. Pulling the tab exerts an off-center
force which breaks the seal between the plug and wall
of the opening.
Caplugs No.
Plugs for Round Tubing
† K-2.5mm is for fiber optic connectors, and also available in black.
mm
12.70
12.70
12.70
12.70
14.22
14.22
14.22
15.75
15.75
15.75
17.27
12.70
19.05
19.05
19.05
15.75
19.05
20.57
22.35
22.35
19.05
19.05
19.05
19.05
19.05
25.40
25.40
25.40
Packaging
Carton Mini Pak
Quantity Quantity
5000
1000
5000
1000
5000
1000
15000
3000
5000
1000
35000
7000
5000
1000
5000
1000
10000
2000
10000
2000
5000
1000
5000
1000
7500
1500
5000
1000
5000
1000
5000
1000
3500
700
L Series
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
2500
500
2500
500
2500
500
2500
500
1500
300
2500
500
1000
200
1000
200
1000
200
1000
200
1000
200
750
150
1000
200
1000
200
1000
200
1000
200
95
plugs
non-threaded
OT Series
Plugs for Type K Style Tubing
Plugs for Type K Style Tubing
OT Series are designed to protect Type K-Style
copper tubing. Tapered body with reinforced crossbraces provides exceptional protection for the tube
configuration.
Dimensions
Caplugs No.
Material: Low-Density Polyethylene Color: Green
D
1/4
C
A
B
PZP Series
In
.302
.394
.523
.646
.740
.990
1.240
1.477
1.960
2.420
2.892
mm
7.67
10.01
13.28
16.41
18.80
25.15
31.50
37.52
49.78
61.47
73.46
In
.312
.414
.543
.676
.770
1.020
1.280
1.517
2.010
2.470
2.952
C
mm
7.92
10.52
13.79
17.17
19.56
25.91
32.51
38.53
51.05
62.74
74.98
In
.38
.38
.50
.62
.75
.88
1.00
1.00
1.00
1.00
1.00
D
mm
9.65
9.65
12.70
15.75
19.05
22.35
25.40
25.40
25.40
25.40
25.40
In
.38
.50
.63
.75
.88
1.12
1.38
1.62
2.13
2.63
3.13
Caplugs
No.
B
• Plugs tube ends
A
E
Material: Low-Density Polyethylene Color: Orange
C
D
Rubber Resealable Plugs
RSP Series provide industries with a plug for use
during shipping and pressure testing of copper
tubing and HVAC compressors. The rubber plug
reseals itself after any nitrogen charging that may
occur during shipping.
Material: Styrene Butadiene Rubber Color: Black
mm
9.65
12.70
16.00
19.05
22.35
28.45
35.05
41.15
54.10
66.80
79.50
PZP-201
PZP-100
PZP-101
PZP-111
PZP-202
PZP-104
PZP-107
PZP-204
PZP-205
Dimensions
Standard
Thread Size Hole Size
–
9/16
3/4
–
7/8
–
1-1/16
–
–
1-1/16
1-1/4
–
1-3/4
–
–
1-5/8
–
1-7/8
A
In
.550
.658
.755
.940
1.040
1.188
1.475
1.600
1.850
B
mm
13.97
16.71
19.18
23.88
26.42
30.18
37.47
40.64
46.99
In
.590
.738
.870
1.044
1.100
1.305
1.636
1.660
1.910
C
mm
14.99
18.75
22.10
26.52
27.94
33.15
41.55
42.16
48.51
In
.50
.50
.50
.62
.62
.69
.69
.75
.75
D
mm
12.70
12.70
12.70
15.75
15.75
17.53
17.53
19.05
19.05
Available in 2014
Dimensions
ØB
ØA
In
.75
1.09
1.19
1.62
1.31
1.91
2.27
1.88
2.13
E
mm
19.05
27.69
30.23
41.15
33.27
48.51
57.66
47.75
54.10
In
.49
.59
.69
.88
.97
1.12
1.41
1.53
1.78
Rubber Resealable Plugs
Caplugs No.
C
RSP-5
RSP-6
RSP-8
RSP-10
RSP-12
RSP-14
Packaging
Carton
Mini Pak
Quantity
Quantity
7500
1500
7500
1500
9000
1800
5000
1000
3000
600
1500
300
1000
200
500
100
500
100
250
50
200
40
PZP Series
Unified Plugs
• For Unified Thread
96
3/8
1/2
5/8
3/4
7/8
1-1/8
1-3/8
1-5/8
2-1/8
2-5/8
3-1/8
B
Unified Plugs
PZP Series tapered plugs are designed to protect
hydraulic and air-hose fittings, but are versatile
enough to fit a variety of applications. The thick
flange enables easy installation and removal.
RSP Series
OT-4
OT-8
OT-12
OT-16
OT-20
OT-24
OT-28
OT-32
OT-36
OT-40
OT-44
Tubing O.D.
A
OT Series
To Fit
Tube Size
5/16
3/8
1/2
5/8
3/4
7/8
A
In
.380
.460
.555
.680
.810
.950
B
mm
10.033
11.176
14.351
17.526
20.574
24.130
In
.500
.580
.675
.800
.970
1.070
C
mm
12.827
14.224
17.653
20.574
24.638
27.178
In
.450
.450
.500
.500
.550
.625
mm
11.430
11.430
12.700
12.700
12.700
15.240
mm
12.45
15.09
17.55
22.35
24.64
28.40
35.69
38.86
45.21
Packaging
Carton Mini Pak
Quantity Quantity
10000
2000
3500
700
3000
600
1500
300
2500
500
1000
200
500
100
1000
200
500
100
RSP Series
Packaging
Carton
Mini Pak
Quantity
Quantity
Contact Customer Service for Availability
Contact Customer Service for Availability
Contact Customer Service for Availability
Contact Customer Service for Availability
Contact Customer Service for Availability
Contact Customer Service for Availability
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
97
plugs
non-threaded
SPT Series
Side Pull-Tab Plugs
SPT Series side pull-tab plugs have shallow plugs with
small flanges, ideal for plugging open ports in areas
with limited space. The pull-tab is molded with a small
bead to enable easy gripping and removal, and the
plugs are color coded by size for your convenience.
Material: Low-Density Polyethylene Color: See chart
STC Series
Side Pull-Tab Plugs
* SPT-9CR has cross ribs on the inside diameter.
Caplugs No.
Easy removal
gripping bead
SPT-6
SPT-8
SPT-9
SPT-9CR*
To Fit
Thread Size
3/8 – 18 NPT
3/4 – 18 UN
1/2 – 14 NPT
1/2 – 14 NPT
A
Color
In
.546
.637
.691
.691
Blue
Yellow
Green
Red
mm
13.89
16.18
17.55
17.55
Dimensions
B
In
mm
.64
16.38
.75
19.23
.79
20.29
.79
20.29
C
In
.78
.86
.86
.86
STC Series plugs are for use on coupling ports on
hydraulic motors, pumps and other control devices.
Designed with a tab feature to reduce installation and
removal time.
• Easy to use
• Multiple applications
• Provides a tight fit with a sealing bead
D
mm
19.81
21.84
21.84
21.84
In
.28
.24
.24
.24
mm
7.11
6.10
6.10
6.1
Snap-to-Connect Plugs
Snap-to-Connect Plugs
Caplugs No.
STC-06-PLUG
STC-08-PLUG
STC-10-PLUG
STC-12-PLUG
STC-16-PLUG
A
In
.57
.70
.86
1.11
1.36
B
mm
14.48
17.78
21.84
28.19
34.54
In
.43
.59
.72
.89
1.13
mm
10.92
14.99
18.29
22.61
28.70
Dimensions
C
In
mm
.38
9.65
.51
12.95
.64
16.26
.83
21.08
1.07
27.18
D
In
.56
.56
.56
.56
.56
SPT Series
STC Series
E
mm
14.22
14.22
14.22
14.22
14.22
In
.47
.60
.61
.59
.99
Packaging
Carton
Mini Pak
Quantity Quantity
12000
1000
12000
1000
12000
1000
8000
1600
mm
11.94
15.24
15.49
14.99
25.15
Packaging
Carton
Mini Pak
Quantity Quantity
5000
1000
5000
1000
5000
1000
4000
800
2000
800
Material: Flex Temp (Thermoplastic rubber) Color: Black
Note: C dimension includes bead
TP Series
Tapered Vinyl Plugs
TP Series tapered vinyl plugs are designed with a
distinct tapered configuration, making them ideal
for plugging small holes, ranging in diameter from
.07" to .34".
• Flexibility of the vinyl allows these plugs to push in
and pull out easily
• Color coded for easy size identification
Material: Vinyl Color: See chart
98
† Mini and Micro Paks only available in standard color.
‡ Minimum order for Micro Paks is 2.
Caplugs No.
TP-4
TP-6
TP-8
TP-9
TP-10
TP-11
TP-12
Color
Red
Blue
Green
Brown
Orange
Gray
Red
Tapered Vinyl Plugs
A
In
.15
.20
.25
.30
.31
.31
.34
mm
3.81
5.08
6.35
7.62
7.87
7.87
8.64
Dimensions
B *REF
In
mm
.07
1.78
.10
2.54
.14
3.56
.14
3.56
.16
4.06
.19
4.83
.19
4.83
C
In
.500
.500
.750
1.000
.750
1.000
.750
mm
12.70
12.70
19.05
25.40
19.05
25.40
19.05
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
Carton
Quantity
5000
5000
5000
5000
5000
5000
5000
TP Series
Packaging
Mini Pak †
Quantity
1000
1000
1000
1000
1000
1000
1000
Micro Pak ‡
Quantity
50
50
50
50
50
50
50
99
plugs
non-threaded / threaded
UPP Series
Universal Pull Plug Series
Universal Pull Plug Series
UPP Series plugs for threaded ports protect against
dirt, debris, and other contaminants during shipping
and/or production. Designed with a flexible pull tab,
they can be installed and removed quickly and easily
without fastening or hand tools. Commonly used in the
automotive and hydraulic markets. Size configurations
to cover 25 different thread specifications including
UN, Metric and BSP.
UPP Series
Dimensions
Caplugs No.
UPP-10-12
UPP-14-16
UPP-18-20
UPP-26-28
A
In
.354
.276
.315
.374
B
mm
8.992
7.010
8.001
9.500
In
.748
.894
1.181
1.575
C
mm
18.999
22.708
29.997
40.005
D
In
.504
.65
.756
1.071
mm
12.802
16.510
19.202
27.203
In
1.339
1.550
1.850
2.244
mm
34.000
39.400
47.000
57.000
Packaging
Carton
Quantity
5000
5000
5000
2500
Material: Low-Density Polyethylene Color: Red
VTP Series
Flexible Vinyl Tapered Plugs
VTP Series vinyl plugs provide a snug yet flexible fit
when pushed into open ports, ensuring a tight closure
that will not pop out accidentally during processing
or shipping. A simple tug on the flanged lip of an
installed VTP breaks the seal for easy removal.
The plugs are molded from a specially formulated,
non-shredding vinyl that offers an attractive, highgloss finish to products.
Material: Vinyl Color: Red Optional Colors: White, brown,
orange, green, gray, blue, yellow
† Mini and Micro Paks only available in standard color.
‡ Minimum order for Micro Paks is 2 Paks.
VTP-05
VTP-1
VTP-2
VTP-25
VTP-3
VTP-35
VTP-4
VTP-5
VTP-55
VTP-6
• Optional Gaskets: Neoprene, Butyl, Buna N Rubber
• Specs: MIL-C-5501/2, NAS 842
Material: 3003-0 Aluminum Alloy Color: Silver
100
To Fit Thread Size
NPT
Standard
–
1/4
–
5/16
1/8
3/8
–
7/16
1/4
1/2
–
9/16
3/8
5/8
1/2
3/4
3/4
7/8
3/4
1-1/16
1-3/16,
1
1-1/4,
1-5/16
A
B
C
In
.195
.290
.400
.445
.530
.570
.640
.800
.870
1.025
mm
4.95
7.37
10.16
11.30
13.46
14.48
16.26
20.32
22.10
28.04
In
.125
.210
.290
.340
.365
.445
.520
.682
.732
.891
mm
3.18
5.33
7.37
8.64
9.27
11.30
13.21
17.32
18.59
22.63
In
.300
.406
.437
.500
.555
.625
.750
.937
1.000
1.188
mm
7.62
10.31
11.10
12.70
14.10
15.88
19.05
23.80
25.40
30.18
Carton
Quantity
5000
5000
5000
5000
5000
2500
2500
2500
1000
1000
1.275
32.39
1.147
29.13
1.453
36.91
1000
Threaded Aluminum Plugs for Flareless Tube and Hose Assemblies
Threaded Aluminum Plugs for Flareless Tube and Hose Assemblies
ADP Series threaded aluminum plugs offer a dimpled
nose section to form a low-pressure seal with tube ends
and hose assemblies.
VTP Series
Dimensions
Caplugs No.
VTP-7
ADP Series
Flexible Vinyl Tapered Plugs
Dimensions
Caplugs No.
ADP-2
ADP-3
ADP-4
ADP-5
ADP-6
ADP-7
ADP-8
ADP-10
ADP-12
ADP-16
ADP-24
To Fit
Tube Size
5/32
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1-1/2
To Fit
Thread Size
5/16 – 24
3/8 – 24
7/16 – 20
1/2 – 20
9/16 – 18
5/8 – 18
3/4 – 16
7/8 – 14
1-1/16 – 12
1-5/16 – 12
1-7/8 – 12
A
In
.34
.28
.29
.32
.33
.31
.43
.49
.47
.45
.63
B
mm
8.64
7.11
7.37
8.13
8.38
7.87
10.92
12.45
11.94
11.43
16.00
In
.47
.57
.61
.70
.76
.90
.94
1.11
1.38
1.53
2.52
C
mm
11.94
14.48
15.49
17.78
19.30
22.86
23.88
28.20
35.05
38.86
64.01
In
.52
.52
.54
.55
.60
.59
.72
.74
.81
.82
.93
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
mm
13.21
13.21
13.72
13.97
15.24
14.99
18.29
18.80
20.57
20.83
23.62
Packaging
Mini Pak
Quantity
1000
1000
1000
1000
1000
500
500
500
200
200
200
Micro Pak
Quantity
100
100
100
100
100
50
50
50
25
25
25
ADP Series
Packaging
Carton
Mini Pak
Quantity
Quantity
5500
1000
5000
1000
7000
1000
5500
1000
4000
1000
5000
1000
4700
800
3500
500
1900
500
1200
200
500
100
101
plugs
threaded
AFO Series
Threaded Aluminum Plugs for Flat-Faced O-Ring Hydraulic Fittings
Threaded Aluminum Plugs for Flat-Faced O-Ring Hydraulic Fittings
AFO Series threaded aluminum plugs are designed for
positive, metal-to-metal threaded protection.
Dimensions
Caplugs No.
• Optional Gaskets: Neoprene, Butyl, Buna N Rubber
Material: 3003-0 Aluminum Alloy Color: Silver
KNURLED
SURFACE
D
C
B
MINIMAL
RADIUS
ASP Series
• Nose section seals on flared fittings with no gasket
• Optional Gaskets: Butyl and Buna N Rubber
• Specs: MIL-C-5501/1, NAS-818, NAS-836
Material: 3003-0 Aluminum Alloy Color: Silver
BSP Series
ROLLED
EDGE
ROLLED
THREAD
FORM
A
(Min 1
Full
Thread)
Optional
Sealing
Gasket
AFO-60
AFO-80
AFO-100
AFO-120
AFO-160
AFO-180
To Fit
Thread Size
11/16 – 16
13/16 – 16
1 – 14
1-3/16 – 12
1-7/16 – 12
1-11/16 – 12
A
In
.607
.730
.907
1.080
1.330
1.582
B
mm
15.42
18.54
23.04
27.43
33.78
40.17
In
.48
.53
.63
.70
.70
.89
C
mm
12.20
13.50
16.00
17.80
17.80
22.60
• Designed for easy finger installation
• 12-point head enables socket or wrench tightening
for positive seal
mm
7.37
7.37
7.87
7.87
10.92
8.89
In
.94
1.11
1.38
1.38
2.00
2.31
mm
23.88
28.20
35.05
35.05
50.80
58.65
Dimensions
Caplugs No.
ASP-3
ASP-4
ASP-5
ASP-6
ASP-7
ASP-8
ASP-10
ASP-12
ASP-16
ASP-24
To Fit
Thread Size
3/8 – 24
7/16 – 20
1/2 – 20
9/16 – 18
5/8 – 18
3/4 – 16
7/8 – 14
1-1/16 – 12
1-5/16 – 12
1-7/8 – 12
B
In
.37
.46
.47
.50
.50
.61
.70
.65
.71
.88
C
mm
9.40
11.70
11.90
12.70
12.70
15.50
17.80
16.50
18.00
22.40
In
.57
.61
.70
.76
.90
.94
1.11
1.38
1.53
2.50
D
mm
14.48
15.49
17.78
19.30
22.86
23.88
28.20
35.05
38.86
63.50
In
.61
.71
.70
.77
.78
.90
.95
.99
1.08
1.24
mm
15.49
18.03
17.78
19.56
19.81
22.86
24.13
25.15
27.43
31.50
Threaded Plugs for British Standard Pipe Fittings
Threaded Plugs for British Standard Pipe Fittings
BSP Series threaded plugs provide positive protective
sealing on ports threaded for British Standard Pipe
fittings. The series has a unique flange compression seal
which prevents leakage of residual fluid.
In
.29
.29
.31
.31
.43
.35
Caplugs No.
BSP-1/4
BSP-3/8
BSP-1/2
BSP-3/4
To Fit
Thread Size
G 1/4
G 3/8
G 1/2
G 3/4
A
In
.36
.36
.43
.43
mm
9.14
9.14
10.92
10.92
In
.33
.33
.44
.44
Dimensions
B
mm
8.38
8.38
11.18
11.18
Packaging
Carton
Mini Pak
Quantity
Quantity
4500
1000
3200
400
1700
300
1400
300
650
100
500
100
D
Threaded Aluminum Plugs for 37° Flared Fittings and Straight-Threaded Ports
Threaded Aluminum Plugs for 37° Flared Fittings and Straight-Threaded Ports
ASP Series threaded aluminum plugs protect 37° flared
fittings and straight-threaded ports.
AFO Series
C
In
.728
.886
1.043
1.339
mm
18.49
22.51
26.49
33.78
ASP Series
Packaging
Carton
Mini Pak
Quantity
Quantity
4500
1000
5000
1000
5000
1000
5000
1000
5000
1000
4000
800
3000
500
1700
500
1150
200
400
80
BSP Series
12-Point
Socket Size D
11
14
18
24
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
4000
800
2000
400
2000
400
Material: Polypropylene Color: Yellow
102
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
103
plugs
threaded
BT Series
Sealing Plugs for British Standard Pipe Fittings
Sealing Plugs for British Standard Pipe Fittings
BT Series sealing plugs are designed to protect British
Standard Pipe fittings. The plugs are engineered with
five complete threads to provide a tight fit.
Dimensions
Caplugs No.
BT-0250
BT-0375
BT-0500
BT-0750
BT-1000
BT-1250
BT-1500
BT-2000
• Easily installed with a screwdriver, socket wrench,
power tool or manually
• “Sealing lip” enables each plug to provide a
secure seal
Material: Nylon Color: Yellow
DPN Series
• Meet UN/UNS specifications
• External ribs aid in installation and removal
• Flanged to create a tight seal
Material: High-Density Polyethylene Color: Blue
In
.39
.43
.51
.51
.55
.59
.59
.59
mm
9.91
10.92
12.95
12.95
13.97
14.99
14.99
14.99
In
.35
.35
.47
.47
.59
.59
.59
.59
Material: High-Density Polyethylene Color: Green
Packaging
Carton
Mini Pak
Quantity
Quantity
7000
1400
4000
800
2500
500
1600
320
900
180
550
110
450
90
250
50
D
mm
8.89
8.89
11.94
11.94
14.99
14.99
14.99
14.99
In
.76
.87
1.07
1.27
1.57
1.98
2.18
2.69
mm
19.30
22.10
27.18
32.26
39.88
50.29
55.37
68.33
Threaded (UN and UNS) Plugs
4, 6 or 8 RIBS
EQUALLY SPACED
DPN Series
Dimensions
Caplugs No.
DPN-3
DPN-4
DPN-5
DPN-6
DPN-8
DPN-10
DPN-12
DPN-14
DPN-16
DPN-20
DPN-21S
DPN-24
DPN-25S
To Fit
Tube Size
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/4
1-1/2
1-1/2
B
To Fit
Thread Size
3/8 – 28
7/16 – 24
1/2 – 24
9/16 – 20
23/32 – 20
27/32 – 18
1 - 16
1-1/8 – 16
1-1/4 – 14
1-33/64 – 14
1-37/64 – 14
1-25/32 – 14
1-27/32 – 14
In
.25
.31
.31
.31
.31
.31
.31
.25
.25
.25
.25
.25
.25
C
mm
6.35
7.87
7.87
7.87
7.87
7.87
7.87
6.35
6.35
6.35
6.35
6.35
6.35
In
.28
.30
.30
.32
.32
.40
.42
.45
.45
.45
.46
.55
.55
Caplugs No.
MSP-14x1.5
MSP-16x1.5
To Plug Thread Size
14mm x 1.5mm
16mm x 1.5mm
A
In
.33
.33
mm
8.30
8.50
Dimensions
B
In
mm
.32
8.20
.24
9.00
Packaging
Carton
Mini Pak
Quantity
Quantity
10000
2000
7000
1400
10000
2000
10000
2000
5000
1000
3500
700
2500
500
2500
500
2000
400
1000
200
1000
200
1000
200
1000
200
D
mm
7.11
7.62
7.62
8.13
8.13
10.16
10.67
11.43
11.43
11.43
11.68
13.97
13.97
In
.44
.56
.62
.69
.88
1.00
1.12
1.25
1.38
1.62
1.75
2.00
2.12
mm
11.18
14.22
15.75
17.53
22.35
25.40
28.45
31.75
35.05
41.15
44.45
50.80
53.85
Slotted-Head Plastic Plugs for Metric-Threaded Ports
Slotted-Head Plastic Plugs for Metric-Threaded Ports
MSP Series plugs feature two concentric raised rings
on the underside of the flange to provide a positive
seal for metric-threaded parts. Cross-slotted head
makes it easy to tighten or remove with a screwdriver.
104
C
Threaded (UN and UNS) Plugs
DPN Series threaded plugs were designed for use in
aircraft and hydraulic equipment applications to seal
out contaminants while protecting threads. A rolled
thread allows the plug to be pushed or threaded on.
MSP Series
B
To Plug BSP
Thread Size
G 1/4
G 3/8
G 1/2
G 3/4
G1
G 1-1/4
G 1-1/2
G2
C
In
.86
.86
MSP Series
D
mm
21.80
21.80
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
In
.59
.63
BT Series
mm
15.00
16.00
Packaging
Carton
Mini Pak
Quantity
Quantity
4000
800
4000
800
105
plugs
threaded
MT Series
Metric Sealing Plugs
Metric Sealing Plugs
MT Series are designed to protect metric fittings with
five complete threads to provide a tight fit and secure
seal. May be applied or removed with a screwdriver,
socket wrench or manually.
Dimensions
Caplugs No.
Plastic Threaded Plugs for Pipe Fittings
B
mm
9.91
9.91
9.91
9.91
10.92
13.97
13.97
13.97
13.97
13.97
13.97
To Plug Metric Thread Size
M10 x 1
M12 x 1.5
M14 x 1.5
M16 x 1.5
M18 x 1.5
M20 x 1.5
M22 x 1.5
M24 x 1.5
M26 x 1.5
M27 x 2
M33 x 2
MT-10
MT-12
MT-14
MT-16
MT-18
MT-20
MT-22
MT-24
MT-26
MT-27
MT-33
Material: Nylon 6 Color: Yellow
P Series
C
mm
7.11
9.91
9.91
9.91
9.91
9.91
9.91
12.00
9.91
12.95
12.95
Dimensions
Caplugs No.
Material: High-Density Polyethylene Color: Red
Head designed to fit 12-point
socket or wrench
P-18
P-28
P-38
P-48
P-108
P-128
P-68H
P-88H
P-68V
P-68VH
P-18B
P-28B
P-38B*
P-48B
P-68B
P-48C
To Fit
Thread Size
1/8 NPT
1/4 NPT
3/8 NPT
1/2 NPT
1-1/4 NPT
1-1/2 NPT
3/4 NPT
1 NPT
3/4 NPT
3/4 NPT
1/8 NPT
1/4 NPT
3/8 NPT
1/2 NPT
3/4 NPT
1/2 -14 NPT
Packaging
Carton
Mini Pak
Quantity
Quantity
10000
2000
8000
1600
6000
1200
4500
900
4000
800
2800
560
2500
500
2200
440
1700
340
1500
300
900
180
D
mm
14.22
17.27
19.30
22.10
23.88
25.91
27.18
31.50
32.00
32.26
40.39
Plastic Threaded Plugs for Pipe Fittings
* Meets NAS 840 specifications.
P Series plastic threaded plugs are available in six
different styles for tapered and straight threads.
Designed to keep out moisture, dirt and other
contaminants in pipe fittings.
Head designed to fit 9/16"
12-point socket or wrench
MT Series
A
In
.44
.50
.56
.59
.75
.97
.62
.72
.62
.50
.56
.74
.83
1.04
1.31
1.04
B
mm
11.18
12.70
14.22
14.99
19.05
24.64
15.75
18.29
15.75
12.70
14.22
18.80
21.08
26.42
33.28
26.41
In
.28
.37
.44
.56
.75
1.25
.62
.81
.50
.31
.27
.37
.33
.55
.63
.50
C
mm
7.11
9.40
11.18
14.22
19.05
31.75
15.75
20.57
12.70
7.87
6.85
9.39
8.38
13.97
16.00
12.70
In
.25
.25
.25
.25
.25
.38
.25
.31
–
–
.58
.68
.71
.92
1.04
.94
mm
6.35
6.35
6.35
6.35
6.35
9.65
6.35
7.87
–
–
14.73
17.27
10.03
23.37
26.42
23.87
P Series
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
2500
500
800
160
700
140
1000
200
1000
200
1000
200
2500
500
5000
1000
5000
1000
2500
500
1000
200
1000
200
3000
600
Serrations
equally spaced
106
This style is suitable for optional gasketing.
Material: Polypropylene
Caplugs Nos. P-18B thru P-68B
Caplugs No. P-48C
Caplugs Nos. P-18 thru P-128
Caplugs Nos. P-68H and P-88H
Caplugs No. P-68V
Tapered Threads
Straight Threads
Caplugs No. P-68VH
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
107
plugs
threaded
PD Series
Threaded Plastic Plugs for Flared JIC Fittings
Threaded Plastic Plugs for Flared JIC Fittings
PD Series are designed for use on flared JIC fittings
and will seal low-pressure requirements with light
finger tightening. May be used on 37° flared fittings
without gaskets. The plugs are knurled for easy
installation and removal
4, 6 OR 8 RIBS
Equally Spaced
Dimensions
Caplugs No.
Material: High-Density Polyethylene/Low-Density Polyethylene
Color: Red
Applicable Specs: NAS 833, NAS 815
C
D
B
108
PD-20 (LDPE)
PD-30 (LDPE)
PD-30 (HDPE)
PD-40 (LDPE)
PD-40 (HDPE)
PD-50 (LDPE)
PD-50 (HDPE)
PD-60 (LDPE)
PD-60 (HDPE)
PD-65 (LDPE)
PD-65 (HDPE)
PD-80 (LDPE)
PD-80 (HDPE)
PD-100 (LDPE)
PD-100 (HDPE)
PD-110 (LDPE)
PD-110 (HDPE)
PD-HF 16 (LDPE)
PD-HF 16 (HDPE)
PD-120 (LDPE)
PD-121 (LDPE)
PD-121 (HDPE)
PD-HF 17 (LDPE)
PD-HF 17 (HDPE)
PD-HF 18 (LDPE)
PD-HF 18 (HDPE)
PD-160 (LDPE)
PD-160 (HDPE)
PD-180 (LDPE)
PD-180 (HDPE)
PD-HF 24 (LDPE)
PD-HF 24 (HDPE)
PD-HF 26 (LDPE)
PD-HF 26 (HDPE)
PD-240 (LDPE)
PD-240 (HDPE)
PD-HF 28 (LDPE)
PD-HF 28 (HDPE)
PD-HF 30 (LDPE)
PD-HF 30 (HDPE)
PD-HF 32 (LDPE)
PD-HF 32 (HDPE)
To Plug Nominal
Tubing Size - Inches
1/8
3/16
3/16
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
1/2
1/2
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
1
1
–
–
1-1/4
1-1/4
–
–
1-1/2
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
2
2
To Fit Thread
Size - Inches
5/16 – 24
3/8 – 24
3/8 – 24
7/16 – 20
7/16 – 20
1/2 – 20
1/2 – 20
9/16 – 18
9/16 – 18
5/8 – 18
5/8 – 18
3/4 – 16
3/4 – 16
7/8 – 14
7/8 – 14
1 – 12
1 – 12
1-1/16 – 12
1-1/16 – 12
1-1/16 – 12
1-1/16 – 14
1-1/16 – 14
1-1/16 – 14
1-1/16 – 14
1-3/16 – 12
1-3/16 – 12
1-5/16 – 12
1-5/16 – 12
1-1/2 – 12
1-1/2 – 12
1-5/8 – 12
1-5/8 – 12
1-3/4 – 12
1-3/4 – 12
1-7/8 – 12
1-7/8 – 12
1-7/8 – 12
1-7/8 – 12
2-1/4 – 12
2-1/4 – 12
2-1/2 – 12
2-1/2 – 12
B
In
.44
.46
.46
.53
.53
.53
.53
.50
.50
.59
.59
.75
.75
.87
.87
.84
.84
.86
.86
.89
1.12
1.12
.86
.86
.93
.93
.93
.93
.93
.93
.94
.94
.97
.97
1.15
1.15
1.06
1.06
1.31
1.31
1.31
1.31
C
mm
11.20
11.70
11.70
13.50
13.50
13.50
13.50
12.70
12.70
15.00
15.00
19.10
19.10
22.10
22.10
21.34
21.34
21.80
21.80
22.61
28.50
28.50
21.80
21.80
23.60
23.60
23.60
23.60
23.60
23.60
23.90
23.90
24.60
24.60
29.20
29.20
26.90
26.90
33.30
33.30
33.30
33.30
In
.44
.50
.50
.62
.62
.68
.68
.81
.81
.81
.81
.94
.94
1.06
1.06
1.12
1.12
1.41
1.41
1.25
1.31
1.31
1.41
1.41
1.50
1.50
1.50
1.50
1.75
1.75
2.22
2.22
2.31
2.31
2.31
2.31
2.47
2.47
2.75
2.75
3.09
3.09
D
mm
11.18
12.70
12.70
15.75
15.75
17.27
17.27
20.57
20.57
20.57
20.57
23.88
23.88
26.93
26.93
28.45
28.45
35.81
35.81
31.75
33.28
33.28
35.81
35.81
38.10
38.10
38.10
38.10
44.45
44.45
56.39
56.39
58.97
58.97
58.68
58.68
62.74
62.74
69.85
69.85
78.49
78.49
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
In
.18
.18
.18
.19
.19
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.34
.34
.34
.34
.31
.31
.38
.38
.38
.38
.38
.38
mm
4.57
4.57
4.57
4.83
4.83
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
8.64
8.64
8.64
8.64
7.87
7.87
9.65
9.65
9.65
9.65
9.65
9.65
PD Series
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
2500
500
2500
500
2500
500
2500
500
2500
500
2500
500
1500
300
1500
300
2500
500
1000
200
1000
200
1500
300
1500
300
1200
240
1200
240
1000
200
1000
200
1000
200
1000
200
500
100
500
100
500
100
500
100
500
100
500
100
500
100
500
100
250
50
250
50
225
45
225
45
109
plugs
threaded
PDE Series
Plastic Threaded Plugs for Flareless Tube and Nut Assemblies
Plastic Threaded Plugs for Flareless Tube and Nut Assemblies
PDE Series are designed to fit tube and nut assemblies
with common thread sizes interchangeably. Knurled to
aid with finger tightening installation and removal.
Dimensions
Caplugs No.
PDE-3
PDE-4
PDE-5
PDE-6 (PDF-40)
PDE-8
PDE-10
PDE-12
PDE-16
Material: Low-Density Polyethylene Color: Red
PDF Series
6 or 8 Ribs Equally Spaced
• Fits common nominal tube sizes
• Knurled for ease of use
Material: Low-Density Polyethylene Color: Red
PDF 40 and 80
In
.35
.40
.46
.48
.54
.62
.64
.72
PDF 60, 100, 120,
160 and 180
Caplugs No.
PDE-6 (PDF-40)
PDF-60
PDF-80
PDF-100
PDF-120
PDF-160
PDF-180
To Plug Nominal Tubing
Size - Inches
1/4
3/8
1/2
5/8
3/4
1
1-1/4
• Common thread sizes
• Flangeless style plug
Material: High-Density Polyethylene Color: Red
C
mm
8.89
10.16
11.68
12.19
13.72
15.75
16.26
18.29
To Fit Thread
Size Inches
9/16 – 18
11/16 – 16
13/16 – 16
1 – 14
1-3/16 – 12
1-7/16 – 12
1-7/16 – 12
In
.56
.56
.63
.68
.87
1.00
1.25
1.50
Carton
Quantity
5000
5000
5000
5000
5000
2500
1000
1000
mm
12.70
14.22
16.00
17.27
22.10
25.40
31.75
38.10
Dimensions
B
In
.48
.44
.50
.59
.63
.75
.89
mm
12.19
11.18
12.70
14.99
16.00
19.05
22.61
In
.68
.87
.94
1.16
1.33
1.63
1.88
PDF Series
mm
17.27
22.10
23.88
29.47
33.78
41.40
47.75
PDH Series
Dimensions
Caplugs No.
PDH-1 3/16-12
PDH-1 3/8-12
PDH-1 3/4-12
PDH-2-12
PDH-2 5/16-12
PDH-3 1/16-12
To Fit Thread Size
1-3/16 – 12
1-3/8 – 12
1-3/4 – 12
2 – 12
2-5/16 – 12
3-1/16– 12
Packaging
B
In
1.060
1.245
1.640
1.878
2.190
2.930
C
mm
26.92
31.62
41.66
47.70
55.63
74.42
Mini Pak
Quantity
1000
1000
1000
1000
1000
500
200
200
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
2500
500
2500
500
1000
200
1000
200
C
Threaded Plastic Plugs for Flat-Faced O-Ring Hydraulic Fittings
Threaded Plastic Plugs for Flat-Faced O-Ring Hydraulic Fittings
PDH Series plugs are designed for flat-faced O-ring
hydraulic fittings and can be installed and removed
with an Allen Wrench. The plastic plugs have a
Universal design with standard thread pitches
to sit flush against an O-ring.
Packaging
B
Threaded Plastic Plugs for Flat-Faced O-Ring Hydraulic Fittings
• Fits common thread sizes
110
To Fit Thread
Size - Inches
3/8 – 24
7/16 – 20
1/2 – 20
9/16 – 18
3/4 – 16
7/8 – 14
1-1/16 – 12
1-5/16 – 12
Threaded Plastic Plugs for Flat-Faced O-Ring Hydraulic Fittings
PDF Series are designed for easy mechanical or hand
installation of flat-faced O-ring hydraulic fittings.
PDH Series
PDE Series
In
1.00
1.00
1.00
1.00
1.00
1.00
mm
25.40
25.40
25.40
25.40
25.40
25.40
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
Carton
Quantity
500
500
500
500
250
250
Mini Pak
Quantity
100
100
100
100
50
50
111
plugs
threaded
PDI Series
Threaded Plastic Plugs for Inverted Flared Fittings
Threaded Plastic Plugs for Inverted Flared Fittings
PDI Series plugs are designed for use on inverted
flared fittings with common thread sizes. Knurled for
ease of use and can be finger tightened to seal. Plugs
will seal boss type fittings without gaskets.
Dimensions
4, 6 OR 8 RIBS
Equally Spaced
Caplugs No.
• For inverted flared fittings
Material: Low-Density Polyethylene Color: Red
C
D
B
PDO Series
B
C
In
.22
.25
.27
.28
.31
.50
.31
.38
.43
mm
5.59
6.35
6.86
7.11
7.87
12.70
7.87
9.65
10.92
In
.44
.50
.63
.69
.81
.81
.87
.87
1.19
mm
11.20
12.70
16.00
17.50
20.60
20.60
22.10
22.10
30.20
In
.19
.19
.19
.25
.25
.25
.25
.25
.25
mm
4.83
4.83
4.83
6.35
6.35
6.35
6.35
6.35
6.35
PDO Series
Dimensions
Caplugs No.
To Fit
Thread Size
7/16 – 20
1/2 – 20
9/16 – 18
3/4 – 16
7/8 – 14
1-1/16 – 12
1-5/16 – 12
1-5/8 – 12
PDO-104
PDO-105
PDO-106
PDO-108
PDO-110
PDO-112
PDO-116
PDO-120
Threaded Plugs
B
C
In
.32
.32
.36
.40
.45
.62
.62
.62
mm
8.13
8.13
9.14
10.16
11.43
15.75
15.75
15.75
In
.65
.72
.78
.98
1.11
1.31
1.56
1.88
mm
16.51
18.29
19.81
24.89
28.20
33.27
39.63
47.75
In
.38
.38
.38
.38
.38
.38
.38
.38
A
Screwdriver Slot
C
• Wide range of thread sizes
D
• Threaded plug
B
• Easy to use
RP-M16x1.5
B
12-point head for socket
or wrench tightening
(14mm wrench)
A
C
RP-7-14
RP-TF 7-1
RP-8-13
RP-TF 8
RP-TF 9
RP-TF 10
RP-TF 12-2
RP-TF 12
RP-TF 14-3
RP-TF 14
RP-TF 17-2
RP-TF 21-1
RP-TF 26
RP-TF 30
RP-M16x1.5**
To Plug Thread
Size - Inches
7/16 – 14
7/16 – 20
1/2 – 13
1/2 – 20
9/16 – 18
5/8 – 18
3/4 – 16
3/4 – 16
7/8 – 14
7/8 – 14
1-1/16 – 12
1-5/16 – 12
1-5/8 – 12
1-7/8 – 12
16mm x 1.5mm
mm
9.65
9.65
9.65
9.65
9.65
9.65
9.65
9.65
Threaded Plugs
Serrated Edge
Caplugs No.
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
2500
500
2500
500
2500
500
1000
200
1000
200
D
* RP-M16x1.5 is white.
RP Series provide a general purpose, high-strength,
machine thread plug adaptable to a multitude of
applications. Originally used for automotive and
air conditioning tube fittings. Serrated for finger
tightening, they also have a slotted hex-head for
screwdriver, nutdriver or wrench installation where
desired.
Material: Polypropylene Color: Red
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
2500
500
D
Plastic Threaded Plugs for SAE O-Ring Ports
Material: High-Density Polyethylene Color: Red
112
PDI-21
PDI-31
PDI-41
PDI-51
PDI-66
PDI-67
PDI-69
PDI-81
PDI-122
To Fit Thread
Size - Inches
5/16 – 28
3/8 – 24
7/16 – 24
1/2 – 20
5/8 – 18
5/8 – 18
11/16 – 18
3/4 – 18
1-1/16 – 16
Plastic Threaded Plugs for SAE O-Ring Ports
PDO Series plugs provide a positive seal for SAE
straight-threaded O-ring-type ports and bosses on
fluid power components with common thread sizes.
Integral O-ring-type bead seals in the bevel of the port
to prevent fluid leakage or entrance of contaminants.
RP Series
PDI Series
A
In
.43
–
.49
–
–
–
–
–
–
–
–
–
–
–
.28
mm
10.92
–
12.57
–
–
–
–
–
–
–
–
–
–
–
7.11
In
.30
.30
.32
.36
.35
.34
.44
.44
.50
.50
.62
.88
1.00
1.00
.52
Dimensions
B
mm
7.62
7.62
8.13
9.14
8.89
8.64
11.18
11.18
12.70
12.70
15.75
22.35
25.40
25.40
13.21
C
In
.62
.68
.69
.74
.81
.74
1.03
.89
1.18
1.02
1.47
1.56
2.00
2.25
.89
D
mm
15.75
17.27
17.53
18.80
20.57
18.80
26.16
22.61
29.97
25.91
37.34
39.62
50.80
57.15
22.61
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
In
.28
.19
.26
.19
.19
.17
.19
.18
.19
.24
.19
.25
.25
.25
–
mm
7.11
4.83
6.60
4.83
4.83
4.32
4.83
4.57
4.83
6.10
4.83
6.35
6.35
6.35
–
RP Series
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
4500
900
3500
700
7500
1500
5000
1000
5000
1000
2500
500
2500
500
1500
300
1000
200
700
140
500
100
4000
800
113
plugs
threaded
RPO Series
RPO Series plugs provide a positive dual seal on SAE
straight-threaded ports. Integral O-ring-type bead
seals into bevel of threaded opening to prevent oil or
fluid leakage. A lip on the flange compresses against
the surface to keep contaminants from the spot face.
Easy to install or remove with a slotted 12-point head
for screwdriver, socket or wrench tightening.
Material: High-Density Polyethylene Color: Red
RPO-M Series
Threaded Plugs
RPO-M Series plugs provide dual seals on ISO fluid
power system metric ports. An integral O-ring-type
bead seals snugly into the bevel of the threaded
opening to prevent oil or fluid leakage. A 12-point head
makes it possible to tighten with socket or wrench.
• SAE threaded ports
• Easy to install or remove
• Molded O-ring
Material: Polypropylene
Color: Green
ETV Series
Threaded Plugs
Threaded Plugs
12-point head for socket
or wrench tightening
Screwdriver Slot
Caplugs No.
RPO-104
RPO-104-24
RPO-105
RPO-106
RPO-108
RPO-110
RPO-112
RPO-116
RPO-120
RPO-124
To Plug Thread
Size - Inches
7/16 – 20
7/16 – 24
1/2 – 20
9/16 – 18
3/4 – 16
7/8 – 14
1-1/16 – 12
1-5/16 – 12
1-5/8 – 12
1-7/8 - 12
Dimensions
B
In
mm
.26
6.60
.26
6.60
.30
7.62
.30
7.62
.31
7.87
.31
7.87
.31
7.87
.33
8.38
.33
8.38
.34
8.636
A
In
.34
.34
.34
.36
.41
.53
.61
.61
.61
.62
mm
8.64
8.64
8.64
9.14
10.41
13.46
15.49
15.49
15.49
15.74
• Threaded plug
• Side tab for easy removal
In
.66
.66
.73
.80
1.02
1.16
1.45
1.74
2.17
2.42
mm
16.76
16.76
18.54
20.32
25.91
29.47
36.83
44.20
55.12
61.468
Caplugs No.
RPO-M10x1.5
RPO-M12x1.5
RPO-M12Sx1.5*
RPO-M13x1.5*
RPO-M14x1.5
RPO-M18x1.5
RPO-M22x1.5
RPO-M27x2
To Plug Thread
Size - Inches
10 x 1.5
12 x 1.5
12 x 1.5
13 x 1.5
14 x 1.5
18 x 1.5
22 x 1.5
27 x 2
12-Point
Socket Size D
3/8
3/8
7/16
1/2
11/16
13/16
1
1-1/4
1-9/16
Threaded Plugs
* RPO-M12Sx1.5 is Blue, RPO-M13x1.5 is Black.
Dimensions
B
In
.33
.34
.33
.37
.38
.44
.44
.44
A
In
.33
.41
.34
.34
.41
.41
.41
.41
mm
8.51
10.41
8.50
8.50
10.41
10.41
10.41
10.41
C
mm
8.41
8.64
8.40
9.30
9.65
11.18
11.18
11.18
In
.65
.73
.73
.73
.81
.97
1.12
1.36
mm
16.51
18.54
18.50
18.50
20.57
24.64
28.45
34.54
12-Point
Socket Size D
12
10
10
12
12
16
20
24
ETV-4
ETV-5
ETV-6
ETV-8
ETV-10
ETV-12
ETV-16
To Plug Thread
SIze - Inches
7/16
1/2
9/16
3/4
7/8
1-1/16
1-5/16
Packaging
A
In
.438
.500
.563
.750
.875
1.047
1.281
B
mm
11.13
12.70
14.30
19.05
22.23
26.59
32.54
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
3000
600
2000
400
2000
400
ETV Series
Dimensions
Caplugs No.
Packaging
Carton
Mini Pak
Quantity
Quantity
8000
1000
8000
1000
6000
1000
6000
1000
3000
600
2000
400
1000
200
1000
200
700
140
600
120
RPO-M Series
Flexible Vinyl External Thread Plugs
Flexible Vinyl External Thread Plugs
Series ETV external thread plugs are injection-molded
vinyl. These flexible plugs can be easily pushed in and
removed with no threading required. The external
threads hold plugs securely in place. The plugs are
also available in temperature resistant Flex500®
material, ideal for finishing applications and exposure
up to 500°F. (HETV Series)
C
RPO Series
In
.438
.500
.500
.625
.688
.750
.875
mm
11.13
12.70
12.70
15.88
17.48
19.05
22.23
Carton
Quantity
5000
5000
5000
5000
4000
2800
2000
Mini Pak
Quantity
1000
1000
1000
1000
800
560
400
Material: Vinyl Color: Black
Several vinyl series are available in
temperature-resistant Flex500.®
114
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
115
plugs
threaded
TB Series
TB Series plugs are designed to protect British
Standard Pipe fittings from contaminants and damage
while providing protection for delicate threads. These
easy to use plugs can be tightened with a screwdriver,
hex wrench, or manually. TB Series plugs meet lowpressure testing requirements.
Material: Linear Low-Density Polyethylene Color: Yellow
TH Series
BSP General-Purpose Plug
BSP General-Purpose Plug
Dimensions
Caplugs No.
TB-0125
TB-0250
TB-0375
TB-0500
B
mm
5.08
5.08
6.10
6.10
To Plug BSP
Thread Size
G 1/8
G 1/4
G 3/8
G 1/2
Packaging
C
mm
8.89
8.89
23.88
11.94
D
mm
21.08
21.08
23.11
27.94
• Hex design socket for installation and removal
• Protects NPT threaded
Carton
Quantity
10000
8000
5000
3000
Hex Socket Threaded Plugs
Hex Socket Threaded Plugs
TH Series plugs are designed to protect internal
threads during low-pressure testing and in-plant
process. Safely keeps contaminants and moisture
from threaded ports. Oil and heat resistant to 250°F.
Not for permanent applications.
TB Series
Mini Pak
Quantity
2000
1600
1000
600
TH Series
Dimensions
Caplugs No.
TH-3
TH-5
TH-7
TH-9
TH-11
To Plug NPT
Thread Size
1/4 – 18
3/8 – 18
1/2 – 14
3/4 – 14
1 – 11-1/2
Packaging
B
In
.25
.31
.38
.56
.63
C
mm
6.35
7.87
9.65
14.22
16.00
In
.31
.38
.38
.50
.53
mm
7.87
9.65
9.65
12.70
13.46
Carton
Quantity
3500
4000
2500
1500
800
Mini Pak
Quantity
700
800
500
300
160
• Keeps ports clean
Material: High-Density Polyethylene Color: Black
TM Series
TM Series plugs are designed to protect metric
threads from damage and contaminants. A knurled
head and screwdriver slot allow for easy installation
and removal. Available in a range of sizes.
Material: Linear Low-Density Polyethylene Color: Yellow
116
Metric General-Purpose Plugs
Metric General-Purpose Plugs
Dimensions
Caplugs No.
TM-12
TM-14
TM-16
TM-18
TM-20
TM-22
To Plug Metric
Thread Size
M12 x 1.5
M14 x 1.5
M16 x 1.5
M18 x 1.5
M20 x 1.5
M22 x 1.5
B
mm
5.08
5.08
6.10
6.10
6.10
6.10
TM Series
Packaging
C
mm
8.89
8.89
9.91
9.91
11.94
11.94
D
mm
21.08
21.08
23.11
23.11
27.94
27.94
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
Carton
Quantity
8000
8000
5000
5000
3000
3000
Mini Pak
Quantity
1600
1600
1000
1000
600
600
117
plugs
threaded
TPN Series
Square-Head Plugs
Square-Head Plugs
TPN Series plugs are ideal for low-pressure testing
and in-house handling. The square-head design
enables easy installation. These plugs protect
threaded ports from damage, contamination and
moisture. Resistant to oil and heat up to 250° F, but
not intended for permanent applications.
Dimensions
Caplugs No.
TPN-1
TPN-3
TPN-5
TPN-7
TPN-9
TPN-11
TPN-13
TPN-15
• Fits NPT threads
• Easy to use
Material: High-Density Polyethylene Color: Black
TPN-F Series
Square-Head with Flange Plugs
In
.25
.25
.25
.25
.25
.25
.38
.38
mm
7.11
9.65
11.18
14.22
15.75
20.57
25.40
31.75
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
3000
600
1500
300
2000
400
1500
300
500
100
500
100
Square-Head with Flange Plugs
TPN-F Series
C
mm
6.35
6.35
6.35
6.35
6.35
6.35
9.65
9.65
In
.29
.35
.42
.47
.52
.59
.83
.83
F
mm
7.37
8.89
10.67
11.94
13.21
14.99
21.08
21.08
† Hexagonal head
TPN-F Series plugs protect the circumference of the
port while simultaneously protecting the threads
from damage, contaminants and moisture. These
square-head design plugs are commonly used for lowpressure testing and in-plant processing and combat
oil and heat up to 250° F.
• Fits NPT threads
B
To Plug NPT
Thread Size
1/8 – 27
1/4 – 18
3/8 – 18
1/2 – 14
3/4 – 14
1–11 - 1/2
1-1/4 – 11-1/2
1-1/2 – 11-1/2
In
.28
.38
.44
.56
.62
.81
1.00
1.25
Dimensions
D
F
B
30˚
• Easy to use
Caplugs No. To Plug NPT
Thread Size
1/8 – 27
TPN-1F †
TPN-3F
1/4 – 18
TPN-5F
3/8 – 18
TPN-7F
1/2 – 14
TPN-9F
3/4 – 14
B
In
.19
.25
.25
.25
.25
C
mm
4.83
6.35
6.35
6.35
6.35
In
.29
.35
.41
.47
.52
D
mm
7.37
8.99
10.41
11.94
13.21
TPN Series
In
.56
.69
.81
1.00
1.25
F
mm
14.22
17.53
20.57
25.40
31.75
In
.43
.44
.44
.56
.63
mm
10.92
11.18
11.18
14.22
16.00
Packaging
Carton
Mini Pak
Quantity
Quantity
7500
1500
5000
1000
2500
500
1500
300
2000
400
C
Material: High-Density Polyethylene Color: Black
TPSD Series
Threaded Plugs with Square Drive
Threaded Plugs with Square Drive
TPSD Series threaded plugs can be used for a wide
variety of applications. These durable, general
purpose plugs are high strength and machine
threaded. Each plug is serrated for easy finger
tightening with a recessed square-head drive for
ease of installation and removal.
Dimensions
Caplugs No.
TPSD-17
TPSD-21
A
In
1.44
1.56
B
mm
36.58
39.63
In
.63
.88
C
mm
16.01
22.36
In
.72
.97
mm
18.29
24.64
Packaging
Carton
Mini Pak
Quantity
Quantity
1800
360
1200
240
A
Material: Polypropylene Color: Red
B
118
To Fit
Thread Size
1-1/16 – 12
1-5/16 – 12
TPSD Series
C
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
119
plugs
threaded / finishing
UT Series
Unified Sealing Plugs
Unified Sealing Plugs
UT Series plugs protect unified/straight-threaded
ports. Each plug features an integral tight fit
sealing lip along with five complete threads. The
design prevents contaminants from entering, while
keeping fluids from escaping, without the use of an
additional O-ring. May be applied and removed with a
screwdriver, socket wrench, power tool, or manually.
Dimensions
Caplugs No.
D
B
• Molded in O-ring sealing bead
• Easy to install and remove
Material: High-Density Polyethylene Color: Red
UTP Series
Material: Low-Density Polyethylene Color: Red
Note: UTP Series is also available in High-Density
Polyethylene – contact Customer Service
mm
9.00
10.00
10.00
12.00
13.00
12.00
12.00
15.00
15.00
In
.43
.43
.43
.47
.39
.55
.55
.59
.67
• One size plug fits a variety of different sized holes
• Quick and easy installation and removal
Material: FlexTemp (Thermoplastic Rubber) Color: Black
Packaging
Carton
Mini Pak
Quantity
Quantity
7000
1400
5500
1100
4700
940
3500
700
3000
600
1700
340
1200
240
750
150
400
80
D
mm
11.00
11.00
11.00
12.00
10.00
14.00
14.00
15.00
17.00
In
.82
.90
.98
.98
1.02
1.33
1.61
1.65
2.28
mm
20.80
22.80
24.80
24.80
26.00
33.80
40.80
42.00
57.80
Universal Thread Plugs
Caplugs
No.
UTP-40
UTP-50
UTP-60
UTP-80
UTP-100
UTP-120
UTP-160
To Fit Thread Size
1/8 NPT, 7/16 UNF, 1/8 BSP, M10
1/2 UNF, 1/4 BSP, M11-12
1/4 NPT, 9/16 UNF, M14
3/4 UNF, 3/8 BSP, M16-20
1 UNF, 1/2 - 5/8 BSP, M22-27
1-3/16 UN, 7/8 BSP, M30
1-7/16 UN, 7/8 BSP, M36
In
.530
.560
.590
.670
.740
.910
.980
Dimensions
B
mm
13.46
14.22
14.99
17.02
18.80
23.11
24.89
Caplugs No.
BPFE-15MM
BPFE-17MM
BPFE-19MM
BPFE-21MM
BPFE-23MM
BPFE-25MM
BPFE-27MM
BPFE-29MM
BPFE-31MM
BPFE-33MM
BPFE-39MM
Hole Size
In
.571 – .631
.650 – .709
.728 – .787
.807 – .866
.866 – .945
.965 – 1.024
1.043 – 1.102
1.122 – 1.181
1.201 – 1.260
1.280 – 1.339
1.516 – 1.575
mm
14.50 – 16.00
15.20 – 18.00
18.50 – 20.00
20.50 – 22.00
22.50 – 24.00
24.50 – 26.00
26.50 – 28.00
28.50 – 30.00
30.50 – 32.00
32.50 – 34.00
38.50 – 40.00
Dimensions
Metal Thickness
A
In
mm
In
.031 – .079
.80 – 2.00
.307
.031 – .079
.80 – 2.00
.307
.031 – .079
.80 – 2.00
.303
.031 – .079
.80 – 2.00
.307
.031 – .079
.80 – 2.00
.307
.031 – .079
.80 – 2.00
.295
.031 – .079
.80 – 2.00
.307
.031 – .079
.80 – 2.00
.307
.031 – .079
.80 – 2.00
.307
.031 – .079
.80 – 2.00
.307
.031 – .079
.80 – 2.00
.307
UTP Series
Packaging
C
In
.260
.280
.310
.390
.460
.560
.560
Carton
Quantity
5000
5000
5000
5000
3000
2500
2500
mm
6.60
7.11
7.87
9.91
11.68
14.22
14.22
Ergonomic Button Plugs with Flush-Type Heads
Ergonomic Button Plugs with Flush-Type Heads
BPFE Series ergonomic button plugs with flush-type
heads are designed to plug holes in sheet metal. The
BPFE Series offers greater versatility because of the
pliable nature of the material.
120
In
.35
.39
.39
.47
.51
.47
.47
.59
.59
C
Universal Thread Plugs
UTP Series plugs offer unique flexibility to fit many
thread sizes. The plugs are easily installed by pushing
into a female threaded port, and a small turn locks
the plug in place. UTP Series plugs are also available
in high-density material.
BPFE Series
C
UT-6
UT-8
UT-10
UT-11
UT-12
UT-14
UT-16
UT-20
UT-24
B
To Plug
Thread Size
7/16 – 20
1/2 – 20
9/16 – 18
5/8 – 18
3/4 – 16
7/8 – 14
1-1/16 – 12
1-5/16 – 12
1-5/8 – 16
UT Series
B
mm
7.80
7.80
7.70
7.80
7.80
7.50
7.80
7.80
7.80
7.80
7.80
In
1.024
1.102
1.189
1.260
1.339
1.378
1.496
1.575
1.654
1.732
1.917
BPFE Series
C
mm
26.00
28.00
30.20
32.00
34.00
35.00
38.00
40.00
42.00
44.00
48.7
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
In
.720
.799
.886
.957
1.035
1.102
1.193
1.272
1.350
1.429
1.654
Mini Pak
Quantity
1000
1000
1000
1000
600
500
500
mm
18.30
20.30
22.50
24.30
26.40
28.00
30.30
32.30
34.30
36.30
42.0
Packaging
Carton Mini Pak
Quantity Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
2500
1000
2500
500
2500
500
2500
500
2500
500
121
plugs
finishing
BP Series
BP Series button plugs with recessed type heads can
be used for plugging holes in equipment made of
sheet metal, such as auto bodies, tanks, refrigeration
units, etc.
• Easily snap into place
• Held in place by a bead until deliberately removed
Material: Low-Density Polyethylene Color: Black
122
Button Plugs with Recessed-Type Heads
Button Plugs with Recessed-Type Heads
Caplugs No.
BP-3/8
BP-1/2
BP-1/2-4
BP-11/16
BP-3/4
BP-13/16
BP-7/8
BP-29/32
BP-1
BP-1-1/16
BP-1-3/32
BP-1-1/8
BP-1-1/4
BP-1-5/16
BP-1-3/8
BP-1-1/2
BP-1-1/2-7
BP-SI 416-2
BP-1-5/8
BP-1-3/4-5
BP-1-13/16
BP-1-7/8
BP-2
BP-2-1/2-5
BP-SI 419-2
BP-SI 421-2
Hole Size
In
.37 – .39
.50 – .52
.50 – .52
.68 – .70
.73 – .76
.79 – .82
.87 – .90
.90 – .91
.99 –1.02
1.04 –1.07
1.09 –1.12
1.10 –1.15
1.23 –1.27
1.30 –1.34
1.36 –1.40
1.48 –1.52
1.48 –1.52
1.75
1.59–1.65
1.70–1.78
1.77–1.82
1.85–1.90
1.97–2.02
2.44–2.53
2.50
3.00
mm
9.40 – 9.91
.50 – .52
.50 – .52
17.27 – 17.78
.73 – .76
20.07 – 20.83
22.10 – 22.86
22.86 – 23.11
25.15 – 25.91
26.42 – 27.18
27.69 – 28.45
27.94 – 29.21
31.24 – 32.26
33.02 – 34.04
34.55 – 35.56
37.59 – 38.61
37.59 – 38.61
44.45
40.39 – 41.91
43.18 – 45.21
44.96 – 46.23
46.99 – 48.26
50.04 – 51.31
61.98 – 64.26
64.50
76.20
Dimensions
Metal Thickness
In
mm
In
.02 – .10
.51 – 2.54
.31
.02 – .07
.51 – 1.78
.29
.06 – .13
1.52 – 3.30
.32
.02 – .09
.51 – 2.29
.28
.02 – .14
.51 – 3.56
.34
.02 – .07
.51 – 1.78
.29
.02 – .10
.51 – 2.54
.35
.02 – .10
.51 – 2.54
.35
.02 – .10
.51 – 2.54
.35
.02 – .10
.51 – 2.54
.35
.02 – .10
.51 – 2.54
.35
.02 – .18
.51 – 4.57
.43
.01 – .10
.25 – 2.54
.35
.01 – .10
.25 – 2.54
.35
.02 – .10
.25 – 2.54
.35
.02 – .10
.25 – 2.54
.35
.13 – .22
3.30 – 5.59
.50
.02 – .10
.51 – 2.54
.35
.03 – .10
.76 – 2.54
.36
.02 – .16
.51 – 4.06
.43
.02 – .10
.51 – 2.54
.35
.02 – .10
.51 – 2.54
.35
.02 – .10
.51 – 2.54
.36
.02 – .14
.51 – 3.56
.43
.02 – .10
.51 – 2.54
.38
.02 – .10
.51 – 2.54
.41
A
B
mm
7.87
7.37
8.13
7.11
8.64
7.37
8.89
8.89
8.89
8.89
8.89
10.92
8.89
8.89
8.89
8.89
12.70
8.89
9.14
10.92
8.89
8.89
9.14
10.92
9.65
10.41
In
.75
.85
.85
1.04
1.16
1.15
1.23
1.25
1.35
1.40
1.47
1.53
1.60
1.67
1.73
1.85
1.83
2.13
2.00
2.25
2.16
2.24
2.35
3.00
3.00
3.56
BP Series
C
mm
19.05
21.59
21.59
26.42
29.46
29.21
31.24
31.75
34.29
35.56
37.34
38.86
40.64
42.42
43.94
46.99
46.48
54.10
50.80
57.15
54.86
56.90
59.69
76.20
76.20
90.42
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
In
.41
.55
.55
.73
.79
.85
.93
.95
1.05
1.10
1.16
1.18
1.30
1.36
1.43
1.55
1.54
1.80
1.68
1.80
1.85
1.93
2.05
2.55
2.55
3.06
mm
10.41
13.97
13.97
18.54
20.07
21.59
23.62
24.13
26.67
27.94
29.46
29.97
33.02
34.54
36.32
39.37
39.12
45.72
42.67
45.72
46.99
49.02
52.07
64.77
64.77
77.72
Packaging
Carton Mini Pak
Quantity Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
2500
500
2500
500
2500
500
2500
500
2500
500
2000
400
1500
300
1500
300
2000
400
2500
500
2000
400
1000
200
1000
200
1250
250
500
100
123
plugs
finishing
BPF Series
Button Plugs with Flush-Type Heads
BPF Series button plugs with flush-type heads can be
used for plugging holes in equipment made of sheet
metal, such as automobile bodies, tanks, refrigeration
units, etc.
• Easily snap into place
• Held in place by a bead until deliberately removed
Material: Low-Density Polyethylene Color: Black
124
Button Plugs with Flush-Type Heads
** Material is EVA (ethylene vinyl acetate).
Caplugs No.
BPF-5mm**
BPF-6mm**
BPF-1/4**
BPF-1/4-4**
BPF-11/32**
BPF-3/8
BPF-3/8-3
BPF-7/16
BPF-1/2
BPF-9/16
BPF-5/8
BPF-SI-430
BPF-11/16
BPF-3/4
BPF-13/16-6
BPF-SI-402
BPF-7/8
BPF-7/8-6
BPF-15/16
BPF-SI-413
BPF-SI-465
BPF-1-5
BPF-SI-404
BPF-1-1/8-6
BPF-1-3/16
BPF-SI-414
BPF-1-5/16
BPF-SI-415
BPF-SI-416
BPF-2
BPF-2-1/8
BPF-SI-419
BPF-SI-472
BPF-3
BPF-SI-407
BPF-3-3/8
BPF-3-1/2
BPF-4
BPF-SI-425
BPF-SI-425S
Hole Size
In
.18 – .19
.23 – .24
.24 – .25
.24 – .25
.34-.35
.37 – .38
.37 – .38
.43 – .45
.49 – .51
.55 – .56
.61 – .63
.62
.68 – .70
.73 – .76
.80 – .83
.81
.86 – .88
.86 – .88
.92 – .95
1.00
1.09
.98 – 1.01
1.125
1.10 – 1.15
1.16 – 1.20
1.25
1.29 – 1.33
1.50
1.75
1.98 – 2.01
2.10 – 2.14
2.50
2.62
2.97 – 3.02
3.12
3.35 – 3.40
3.47 – 3.52
3.97 – 4.02
4.00
4.00
mm
4.57 – 4.90
5.84 – 6.10
6.10 – 6.35
6.10 – 6.35
8.64 – 8.89
9.40 – 9.65
9.40 – 9.65
10.92 – 11.43
12.45 – 12.95
13.97 – 14.22
15.49 – 16.00
15.87
17.27 – 17.78
18.54 – 19.30
20.32 – 21.08
20.62
21.84 – 22.35
21.84 – 22.35
23.37 – 24.13
25.40
27.60
24.89 – 25.66
28.58
27.94 – 29.21
29.47 – 30.48
31.75
32.77 – 33.78
38.10
44.45
50.29 – 51.05
53.34 – 54.36
63.50
66.67
75.44 – 76.71
79.37
85.09 – 86.36
88.14 – 89.41
100.84 – 102.11
101.60
101.60
Dimensions
Metal Thickness
In
mm
In
.02 – .04
.51 – 1.02
.21
.02 – .06
.51 – 1.52
.45
.02 – .07
.51 – 1.78
.21
.07 – .13
1.78 – 3.30
.30
.04 – .06
1.02 – 1.52
.23
.02 – .05
.51 – 1.27
.19
.06 – .11
1.52 – 2.79
.24
.03 – .06
.76 – 1.52
.22
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.06 – .08
1.52 – 2.03
.26
.06 – .08
1.52 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.05 – .11
1.27 – 2.79
.29
.16 – .19
4.06 – 4.83
.37
.03 – .08
.76 – 2.03
.37
.03 – .08
.76 – 2.03
.25
.13 – .18
3.30 – 4.57
.36
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.08 – .20
2.03 – 5.08
.40
.03 – .08
.76 – 2.03
.43
.02 – .18
.51 – 4.57
.43
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.29
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.25
.03 – .08
.76 – 2.03
.28
.03 – .11
.76 – 2.79
.28
.05 – .10
1.27 – 2.54
.28
.05 – .10
1.27 – 2.54
.29
.05 – .10
1.27 – 2.54
.50
A
B
mm
5.40
11.40
5.33
7.62
5.84
4.83
6.10
5.59
6.35
6.35
6.60
6.35
6.35
7.37
9.40
9.40
6.35
9.14
6.35
6.35
6.35
10.16
10.92
10.92
6.35
6.35
6.35
6.35
6.35
7.36
6.35
6.35
6.35
6.35
6.35
7.11
7.11
7.11
7.37
12.70
In
.39
.50
.50
.50
.55
.75
.75
.69
.86
.86
.81
1.06
1.01
1.01
1.11
1.11
1.16
1.16
1.31
1.38
1.31
1.35
1.53
1.53
1.56
1.62
1.68
1.88
2.12
2.36
2.49
3.00
3.12
3.36
3.52
3.75
3.86
4.37
4.50
4.50
BPF Series
C
mm
9.90
12.70
12.70
12.70
13.97
19.05
19.05
17.53
21.84
21.84
20.57
26.92
25.66
25.66
28.20
28.19
29.47
29.47
33.28
35.05
33.27
34.29
38.86
38.86
39.63
41.15
42.67
47.75
53.85
59.94
63.25
76.20
79.25
85.35
89.41
95.25
98.05
111.00
114.30
114.30
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
In
.21
.29
.28
.28
.37
.41
.41
.47
.54
.59
.67
.68
.73
.79
.85
.85
.91
.91
.98
1.04
1.15
1.04
1.18
1.18
1.22
1.29
1.36
1.54
1.79
2.04
2.17
2.56
2.68
3.06
3.18
3.43
3.56
4.13
4.06
4.10
mm
5.40
7.40
7.11
7.11
9.40
10.41
10.41
11.94
13.72
15.06
17.02
17.15
18.54
20.07
21.59
21.59
23.11
23.11
24.89
26.42
29.21
26.42
29.97
29.97
30.99
32.77
34.55
39.12
45.47
51.81
55.12
65.02
67.95
77.73
80.77
87.13
90.43
104.91
103.12
104.14
Packaging
Carton Mini Pak
Quantity Quantity
5000
1000
5000
1000
5000
1000
5000
1000
10000
2000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
10000
2000
5000
1000
5000
1000
5000
1000
6000
1200
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
2500
500
2000
400
2500
500
2500
500
2500
500
2500
500
2000
500
1500
400
1000
200
1000
200
1000
200
1000
200
750
150
700
140
500
100
500
100
500
100
350
70
400
80
125
plugs
finishing
CCF Series
CCF Series plugs for round tubing feature tapered
ribs to ensure a secure fit. Perfect for use on a wide
range of metal furniture, appliances and similar
items. A thick impact and abrasion resistant base
makes these plugs ideal tubing closures for products
subject to heavy-duty service or exposure to adverse
environments.
• Durable construction and excellent gliding edges
• Not subject to rust or corrosion
Material: Low-Density Polyethylene Color: Black
DO Series
Caplugs No.
CCF-1/2-13-14
CCF-1/2-16-20
CCF-5/8-10-12 DOME
CCF-5/8-14-20
CCF-3/4-14-20
CCF-7/8-10-14
CCF-7/8-14-20
CCF-1-10-14
CCF-1-14-20
CCF-1-1/8-14-20
CCF-1-1/4-10-14
CCF-1-1/4-14-20
CCF-RT-11
CCF-1-1/2-8-12
CCF-1-1/2-10-14
CCF-1-1/2-14-20
CCF-RT-13-1
CCF-1-5/8-14-20
CCF-1-3/4-10-14
CCF-1-3/4-14-20
CCF-RT-195-1
CCF-2-10-14
CCF-2-14-20
CCF-2-1/8-10-16
CCF-2-1/4-10-14
CCF-RT-18
CCF-2-3/8-10-14
CCF-2-1/2-8-12
CCF-2-1/2-14-20
CCF-RT-22-3
CCF-RT-24-3
CCF-RT-24-4
CCF-RT-30-3
CCF-4-4-8
CCF-4-10-16
CCF-RT-38
A-To Fit Tube Size O.D.
In
.500
.500
.625
.625
.750
.875
.875
1.000
1.000
1.125
1.250
1.250
1.375
1.500
1.500
1.500
1.625
1.625
1.750
1.750
1.950
2.000
2.000
2.125
2.250
2.250
2.375
2.500
2.500
2.750
3.000
3.000
3.500
4.000
4.000
4.750
Dimensions
Gage (Wall Thickness)
In
13 – 14 Ga. (.095 – .083)
16 – 20 Ga. (.065 – .035)
10 – 12 Ga. (.134 – .109)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
8 – 12 Ga. (.165 – .109)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 16 Ga. (.134 – .065)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
8 – 12 Ga. (.165 – .109)
14 – 20 Ga. (.083 – .035)
7 – 10 Ga (.180 – .134)
8 – 10 Ga. (.165 – .134)
13 – 17 Ga. (.095 – .58)
7 – 12 Ga. (.180 – .109)
4 – 8 Ga. (.238 – .165)
10 – 16 Ga. (.134 – .065)
6 – 11 Ga. (.203 – .120)
Material: Low-Density Polyethylene Color: Black
CCF Series
Packaging
B
In
.45
.45
.45
.44
.44
.44
.44
.44
.44
.52
.52
.52
.50
.52
.52
.52
.50
.52
.59
.59
.56
.59
.59
.67
.66
.69
.66
.69
.69
.84
.84
.84
.77
1.00
1.00
1.10
mm
11.40
11.43
11.43
11.18
11.18
11.20
11.18
11.18
11.18
13.21
13.21
13.21
12.70
13.21
13.21
13.21
12.70
13.21
14.99
14.99
14.22
14.99
14.99
17.02
16.76
17.53
16.76
17.53
17.53
21.34
21.34
21.34
19.56
25.40
25.40
27.94
Carton
Quantity
10000
10000
6000
5000
5000
4000
4000
4000
4000
2500
1500
1500
1500
1500
1500
1500
1000
1000
1000
1000
750
500
500
700
500
500
400
400
400
250
200
200
150
100
100
60
Dome, Ribbed Tubing Plugs
Dome, Ribbed Tubing Plugs
DO Series dome ribbed tubing plugs are designed with
exterior ribs to provide a firm grip inside a tube with
a domed finish. This series is ideal for use on metal
furniture as attractive finishing plugs. DO Series plugs
shield against injury and impact.
126
Plugs for Round Tubing
Plugs for Round Tubing
Dimensions
Caplugs No.
DO-6
DO-7
DO-16
DO-16-1
DO-1220
Mini Pak
Quantity
1000
1000
1000
1000
1000
800
800
800
800
500
300
300
300
300
300
300
200
200
200
200
150
100
100
140
100
100
80
80
80
50
40
40
30
20
20
12
DO Series
Packaging
A-To Fit Tube Size O.D.
Wall Thickness
3/4 SQR Half – Moon Head
7/8 SQR Half – Moon Head
2 SQR Pyramid Head
2 SQR Pyramid Head
1-3/16 x 2 Rec Half-moon
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
16 Ga. (.065)
Carton
Quantity
3000
2500
500
500
500
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
Mini Pak
Quantity
600
500
100
100
100
127
plugs
finishing
DOP Series
DOP Series dome plugs are finishing plugs for
unneeded or unused holes in chassis or other
surfaces. The convex design firmly tapers to a thin
edge for a seamless finish. The matte finish head
offers a professional and finished appearance.
• Easy installation
• Plugs lock firmly into surfaces
Material: Nylon 6 Color: Black
FP Series
Caplugs No.
DOP-187
DOP-250
DOP-312
DOP-375
DOP-437
DOP-500
DOP-625
DOP-750
DOP-875
DOP-1250
DOP-1375
DOP-1500
DOP-2000
Chassis Dimensions
Maximum Thickness
Mounting Hole Diameter
In
mm
In
mm
.062
1.57
.187
4.75
.062
1.57
.250
6.35
.062
1.57
.312
7.92
.125
3.18
.375
9.53
.125
3.18
.437
11.10
.125
3.18
.500
12.70
.125
3.18
.625
15.88
.125
3.18
.750
19.05
.125
3.18
.875
22.23
.125
3.18
1.250
31.75
.125
3.18
1.375
34.93
.125
3.18
1.500
38.10
.125
3.18
2.000
50.80
• Protect against sharp tube edges
• Provide clean finish on completed products
Material: Low-Density Polyethylene Color: Black
Dimensions
C
In
.23
.31
.31
.41
.41
.41
.41
.41
.45
.45
.45
.45
.47
Packaging
Carton
Mini Pak
Quantity
Quantity
8000
1600
4000
800
3000
600
4000
800
5000
1000
4000
800
4000
800
1700
340
2000
400
1000
200
500
100
400
80
200
40
D
mm
5.84
7.87
7.87
10.41
10.41
10.41
10.41
10.41
11.43
11.43
11.43
11.43
11.94
In
.25
.31
.38
.47
.53
.58
.72
.92
1.02
1.38
1.50
1.67
2.17
Dimensions
Caplugs No.
mm
6.35
7.87
9.65
11.94
13.46
14.73
18.29
23.37
25.91
35.05
38.10
42.42
55.12
FP-85
FP-125
FP-161
FP-164
FP-165
FP-166
FP-167
FP-201
FP-204
FP-205
FP-241
FP-244
FP-245
FP-321
FP-324
FP-325
Wall Thickness
In
.065 (16 Ga.)
.065 (16 Ga.)
.120 (11 Ga.)
.083 (14 Ga.)
.065 (16 Ga.)
.049 (18 Ga.)
.035 (20 Ga.)
.120 (11 Ga.)
.083 (14 Ga.)
.065 (16 Ga.)
.120 (11 Ga.)
.083 (14 Ga.)
.065 (16 Ga.)
.120 (11 Ga.)
.083 (14 Ga.)
.065 (16 Ga.)
Carton
Quantity
5000
5000
2500
2500
2500
2500
2500
2500
2500
2500
1000
1000
1000
1000
1000
1000
Mini Pak
Quantity
1000
1000
500
500
500
500
500
500
500
500
200
200
200
200
200
200
Multi-Purpose Snap-In Plug
Caplugs No.
MPP-1605
FP Series
Packaging
To Fit Tube Size
In
.50
.75
1.00
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.50
1.50
1.50
2.00
2.00
2.00
Multi-Purpose Snap-In Plug
MPP Series multi-purpose plugs are an attractive
plug to finish off holes in sheet metal or other
surfaces. The 'Quadra-Level' locking grooves on
spring tabs adhere tightly to varying gauges of
materials. Quick and easy installation requires just
fingertip pressure
DOP Series
Finishing Plugs for Square Tubing
Finishing Plugs for Square Tubing
FP Series finishing plugs are designed for square
tubing. The plugs are sized for different gauges.
FP Series shoulders fit flush with tubing sides and
keep dirt and moisture out of sensitive areas.
MPP Series
Dome Plugs
Dome Plugs
Hole Size
In
1
MPP Series
Packaging
Carton
Quantity
4500
Mini Pak
Quantity
900
Material: Nylon Color: Black
128
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
129
plugs
finishing
PIP Series
Push-In Plugs
PIP Series push-in plugs are designed to fit SAE
and NPT thread sizes. These parts offer the
convenience of a push-in plug with the plugging
quality of a threaded plug.
Caplugs No.
PIP-1/4**
PIP-5/16**
PIP-3/8
PIP-7/16
PIP-1/2
PIP-9/16
PIP-5/8
PIP-3/4
PIP-7/8
PIP-IB 16
PIP-IB 17
PIP-1 5/8
PIP-1 7/8
Material: Low-Density Polyethylene Color: Black
PIP-1/4 only
PIP-TAB Series
To Fit SAE
Thread Size
In
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/16
1-5/8
1-7/8
To Fit NPT
Thread Size
In
–
–
1/8
–
1/4
–
3/8
–
–
3/4
–
–
–
Dimensions
B
In
mm
.25
6.35
.24
6.10
.24
6.10
.27
6.86
.27
6.86
.29
7.37
.29
7.37
.29
7.37
.29
7.37
.25
6.35
.25
6.35
.46
11.68
.50
12.70
A
In
.206
.253
.317
.370
.444
.500
.558
.681
.797
.918
.974
1.525
1.775
mm
5.23
6.43
8.05
9.40
11.28
12.70
14.17
17.30
20.24
23.32
24.74
38.74
45.09
C
In
.40
.52
.59
.64
.72
.81
.96
.95
1.15
1.30
1.40
2.03
2.28
mm
10.16
13.21
14.99
16.26
18.29
20.57
24.38
24.13
29.21
33.02
35.56
51.56
57.91
Push-In Plugs with Pull-Tab
Push-In Plugs with Pull-Tab
PIP-TAB Series push-in plugs with pull-tabs are
designed to fit SAE and NPT thread sizes. These parts
offer the convenience of a push-in plug with the
plugging quality of a threaded plug. PIP-TAB Series
also have a convenient pull-tab for easy removal.
Caplugs No.
Material: Low-Density Polyethylene Color: Black
C
B
A
SH Series
Push-In Plugs
** PIP-1/4 and -5/16 are EVA material
Finishing Plugs for Socket Head Screws
PIP-3/8 TAB
PIP-7/16 TAB
PIP-1/2 TAB
PIP-9/16 TAB
PIP-5/8 TAB
PIP-3/4 TAB
PIP-7/8 TAB
PIP-1 5/8 TAB
PIP-1 7/8 TAB
To Fit SAE
Thread Size
In
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1-5/8
1-7/8
To Fit NPT
Thread Size
In
1/8
–
1/4
–
3/8
–
–
–
–
Dimensions
B
In
mm
.24
6.10
.27
6.86
.27
6.86
.29
7.37
.29
7.37
.29
7.37
.29
7.37
.46
11.68
.50
12.70
A
In
.317
.370
.444
.500
.558
.681
.797
1.525
1.775
mm
8.05
9.40
11.28
12.70
14.17
17.30
20.24
38.74
45.09
SH Series finishing plugs for socket head screws
keep foreign matter out of screw head driving
recess and counterbore. Ideal for sanitary
equipment, screws that need periodic resetting,
production and maintenance spray painting,
and numerous other applications. Translucent
polyethylene ensures visual identification of
socket screws.
mm
14.99
16.26
18.29
20.57
24.38
24.13
29.21
51.56
57.91
Finishing Plugs for Socket Head Screws
**To fit standard socket headcap screw.
Dimensions
Caplugs No.
SH-25
SH-31
SH-38
SH-50
Screw Size**
1/4
5/16
3/8
1/2
A
In
.198
.260
.322
.385
B
mm
5.03
6.60
8.18
9.78
In
.120
.151
.182
.245
C
mm
3.05
3.84
4.62
6.22
In
.50
.59
.69
.88
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
4500
900
2000
400
1500
300
PIP-TAB Series
C
In
.59
.64
.72
.81
.96
.95
1.15
2.03
2.28
PIP Series
mm
12.70
14.99
17.53
22.35
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
5000
1000
2000
400
1500
300
SH Series
Packaging
Carton
Mini Pak
Quantity
Quantity
5000
1000
5000
1000
5000
1000
5000
1000
Material: Low-Density Polyethylene Color: Natural
THEY CAP...the top and the opening around the head
of Allen type socket screws, including the recessed counterbore.
THEY SEAL OUT...dirt, grease, paint, acids,
abrasives and other contaminants.
THEY PLUG...into the hex socket snugly and stay there until you remove them.
130
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
131
plugs
finishing
RER Series
Plugs for Rectangular Tubing
RER Series plugs for rectangular tubing feature a
series of externally tapered ribs designed to provide
a sure grip inside a tube without unattractive plastic
shavings. Durable construction ensures exceptional
performance in business and commercial applications.
Caplugs No.
• Broad selection of width to length proportions
A
Material: Low-Density Polyethylene Color: Black
RER (50x100mm) 6-12 available in white.
C
B
RERV Series
Plugs for Rectangular Tubing
† Plain shank
RER-1/2x1-16-18
RER-RC-0515
RER-5/8x1 1/8-14-20
REC-5/8x1-1/4-14
RER-5/8x1-3/8-14-20
RER-3/4x1-1/2-14-20
RER-1x1-1/4-14-20
RER-1x1-1/2-10-14
RER-1x1-1/2-14-20
RER-1x2-10-14
RER-1x2-14-20
RER-RC-1020-3 †
RER-RC-1025
RER-1x2-1/2-16-18
RER-1x3-14-20
RER-1-1/2x2-10-14
RER-1-1/2x2-1/2-12-16
RER-RC-1530-1
RER-1-1/2x3-1/2-10-14
RER-2x2-1/2-10-14
RER-2x3-6-8
RER-2x3-10-14
RER-RC-2030
RER-RC-2040-2
RER-40x80-3-4mm
RER-50x100mm 6-12
RER-RC-2040-1
RER-RC-2040
RER-RC-2050-3 †
RER-RC-2050-4 †
RER-3x4-6-8
A
In
.500
.500
.625
.625
.625
.750
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.500
1.500
1.500
1.500
2.000
2.000
2.000
2.000
2.000
40mm
2.000
2.000
2.000
2.000
2.000
3.000
B
In
1.000
1.500
1.125
1.250
1.375
1.500
1.250
1.500
1.500
2.000
2.000
2.000
2.500
2.500
3.000
2.000
2.500
3.000
3.500
2.500
3.000
3.000
3.000
4.000
80mm
4.000
4.000
4.000
5.000
5.000
4.000
Dimensions
Gage (Wall Thickness)
In
16 – 18 Ga. (.065 – .049)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
14 Ga. (.083)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
18 Ga. (.049)
14 – 20 Ga. (.083 – .035)
16 – 18 Ga. (.065 – .049)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
12 – 16 Ga. (.109 – .065)
10 – 14 Ga. (.134 – .083)
10 – 14 Ga. (.134 – .083)
10 – 14 Ga. (.134 – .083)
6 – 8 Ga. (.203 – .165)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
6 – 11 Ga. (.203 – .120)
3 – 4mm
6 – 8 Ga. (.203 – .109)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
8 Ga. (.165)
10 Ga. (.134)
6 – 8 Ga. (.203 – .165)
C
In
.43
.50
.43
.50
.43
.43
.50
.50
.50
.50
.50
.36
.45
.50
.51
.50
.53
.50
.60
.52
.52
.52
.50
.94
.94
.65
.50
.50
1.00
1.00
.98
mm
10.92
12.70
10.92
12.70
10.92
10.92
12.70
12.70
12.70
12.70
12.70
9.14
11.43
12.70
12.95
12.70
13.46
12.70
15.24
13.20
31.20
13.21
12.70
23.88
23.88
16.51
12.70
12.70
25.40
25.40
24.90
Plugs for Rectangular Tubing
Plugs for Rectangular Tubing
RERV Series vinyl plugs for rectangular tubing are
injection molded to produce the intricate detail
and design typical tube glides provide, but with a
flexible design allowing quick and easy installation
and removal without the use of tools. Instructions
are available for finishing applications or imprinting
company names and logos.
Caplugs No.
RERV-50x100mm 6-12
A
In
2.000
B
In
4.000
Dimensions
Gage (Wall Thickness)
In
6 – 12 Ga. (.194 – .105)
C
In
.65
mm
16.51
RER Series
Packaging
Carton
Mini Pak
Quantity
Quantity
2500
500
3000
600
2000
400
2000
400
2500
500
2000
400
2000
400
1000
200
1000
200
1000
200
1000
200
1500
300
1000
200
1000
200
500
100
600
120
300
60
500
100
300
60
500
100
250
50
250
50
500
100
350
70
250
50
200
40
250
50
250
50
200
40
175
35
100
20
RERV Series
Packaging
Carton
Mini Pak
Quantity
Quantity
200
40
Material: Vinyl Color: Black
A
C
B
132
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
133
plugs
finishing
SQR Series
SQR Series square plugs feature a series of
externally tapered ribs designed to accommodate
a wide range of tubing gauges while also
satisfying fit adjustments inside dimensional
fluctuations. The exterior ribs are designed
to provide a sure grip inside a tube without
unattractive plastic shavings found on many
straight wall glide installations. SQR Series square
plugs are not subject to rust or corrosion.
Material: Low-Density Polyethylene Color: Black
White Glides – Various SQR parts are available in white.
These part numbers are noted on chart in red italics.
Color Glides – For applications that are highly visible on
a finished product, use one of our colored glides. Match
your company colors or choose a color that complements
your product. We can custom match a shade.
Custom Designed Glides – We can also customize
existing glides by cutting out sidewalls, adding additional
support inside the glide for heavier load applications,
and adding ventilation holes. For applications that are
highly visible, we can pad print or engrave your company
logo, part number, or even instructions on the face of
the glide.
SQRV Series
Material: Vinyl Color: Black
SQR Series
Dimensions
Caplugs No.
SQR-1/2-16-18
SQR-5/8-14-20
SQR-3/4-10-14
SQR-3/4-14-20
SQR-7/8-14-20
SQR-1-10-14
SQR-1-10-14 THICK HEAD
SQR-1-14-20
SQR-1-14-20 THICK HEAD
SQR-1-1/8-14-20
SQR-1 1/4-10-14
SQR-1-1/4-14-20
SQR-1 3/8-10-14
SQR-1 3/8-14-20
SQR-1-1/2-10-14
SQR-1-1/2-14-20
SQR-1 3/4-10-14
SQR-1-3/4-14-20
SQR-2-4-8
SQR-2-10-14
SQR-2-14-20
SQR-2-1/4-10-14
SQR-2-1/2-6-10
SQR-2 1/2-16-23
SQR-SQ-20-1
SQR-SQ-22-3
SQR-SQ-22-4
SQR-SQ-24-1
SQR-SQ-25-3
SQR-80mm
SQR-SQ-30-3
SQR-SQ-30-4
SQR-SQ-31-3
SQR-SQ-32-3
SQR-100mm
SQR-SQ-38
SQR-5-3-10
SQR-6-3-10
A-To Fit Tube Size O.D.
In
.500
.625
.750
.750
.875
1.000
1.000
1.000
1.000
1.125
1.250
1.250
1.375
1.375
1.500
1.500
1.750
1.750
2.000
2.000
2.000
2.250
2.500
2.500
2.500
2.750
2.750
3.000
3.125
80 mm
3.500
3.500
3.875
4.000
100 mm
4.750
5.000
6.000
Gage (Wall Thickness)
In
16 – 18 Ga. (.065 – .049)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
4 – 8 Ga. (.238 – .165)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
6 – 10 Ga. (.203 – .134)
16 – 23 Ga. (.065 – .025)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
8 – 14 Ga. (.165 – .083)
3 – 7 Ga. (.259 – .180)
6 – 11 Ga. (.203 – .120)
2.5 – 5.6 mm
6 Ga. (.203)
14 – 20 Ga. (.083 – .035)
4 – 8 Ga. (.238 – .165)
4 – 11 Ga. (.238 – .120)
5-6.3 mm
6 – 11 Ga. (.203 – .120)
3 – 10 Ga. (.259 – .134)
3 – 10 Ga. (.259 – .134)
Packaging
B
In
.44
.43
.43
.43
.43
.43
.43
.43
.43
.49
.52
.52
.52
.52
.52
.52
.52
.52
.52
.52
.52
.52
.56
.56
.50
.65
.73
.50
.97
.98
.69
.69
1.00
.91
.98
1.00
.98
.98
mm
11.17
10.92
10.92
10.92
10.92
10.92
10.92
10.92
10.92
12.45
13.21
13.21
13.21
13.21
13.21
13.21
13.21
13.21
13.21
13.21
13.21
13.21
14.22
14.20
12.70
16.51
18.54
12.70
24.64
24.89
17.53
17.53
25.40
23.11
24.89
25.40
24.90
24.90
Vinyl Plugs for Square Tubing
Vinyl Plugs for Square Tubing
SQRV Series vinyl plugs for square tubing are
injection molded to produce the intricate detail
and design typical tube glides provide, but
with a flexible design allowing quick and easy
installation and removal without the use of
tools. Instructions are available for finishing
applications or imprinting company names
and logos.
134
Plugs for Square Tubing
Plugs for Square Tubing
Carton
Quantity
Mini Pak
Quantity
5000
5000
2500
2500
3000
2500
2000
2500
1000
1500
1000
1000
1000
1000
1000
1000
500
500
500
500
500
200
300
300
500
200
200
400
150
100
100
100
200
150
75
100
75
50
1000
1000
500
500
600
500
400
500
200
300
200
200
200
200
200
200
100
100
100
100
100
40
60
60
100
40
40
80
65
20
20
20
40
30
15
20
15
10
SQRV Series
Dimensions
Caplugs No.
SQRV-3/4-14-20
SQRV-1-10-14
SQRV-1-14-20
SQRV-1-1/4-14-20
SQRV-1-1/2-10-14
SQRV-1-1/2-14-20
SQRV-2-10-14
A-To Fit Tube Size O.D.
In
.750
1.000
1.000
1.250
1.500
1.500
2.000
Gage (Wall Thickness)
In
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
14 – 20 Ga. (.083 – .035)
10 – 14 Ga. (.134 – .083)
Packaging
B
In
.43
.43
.43
.52
.52
.52
.52
mm
10.92
10.92
10.92
13.21
13.21
13.21
13.21
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
Carton
Quantity
Mini Pak
Quantity
2500
2500
2500
1000
1000
1000
500
500
500
500
200
200
200
100
135
plugs
core plugs
CP Series
CP Series core plugs are our most versatile, with a
PolyGuard design that incorporates 12 supporting ribs
to fit and protect all types of rolls. Molded of super
high-impact thermoplastic resins, these plugs are
exceptional in strength. Lugs on the circumference
of these plugs compensate for variations in the ID of
cores, while a dish-shaped bottom increases overall
plug strength compared to competitors' old flat-bottom
style. Sampling is recommended.
Material: See chart Color: Black
CPH Series
Core Plugs
Core Plugs
Caplugs No.
CP-CP1501
CP-CP201
CP-CP7510-1
CP-CP5000-N
CP-CP3000
CP-CP2970
CP-CP603
CP-CP6015
CPH Series heavy duty core plugs provide exceptional
strength and protection to heavyweight mill roll
products with PPCP resins. Tapered lead provides
easy installation and a secure fit. Plugs will not swell,
shrink, or flake off, and are designed without a flange
so rolls can be stacked more easily. Use this plug as
a cost-effective way to eliminate expensive wood
composites. Sampling is recommended.
Packaging
Material
Size
Description
HIPS
HDPE
HDPE
PPCP
PPCP
HDPE
PPCP
HDPE
1-1/2"
2"
3"
3"
3"
3"
6"
6"
Standard fit
Standard fit
Used with oversize cores
Standard fit
Smaller diameter flange, used on automated machines
Used with undersize cores
Standard fit
Light duty
Pieces
5300
1500
750
650
700
650
130
392
Core Plugs (heavy duty)
Core Plugs (heavy duty)
Caplugs No.
CPH-9510
Size
Description
3"
Standard fit
CP Series
Lbs
41
42
29
30
28
32
20
55
CP Series
Packaging
Pieces
240
Lbs
30
Material: PPCP Color: Black
D Series
Core Plugs (double plug)
Core Plugs (double plug)
D Series core double plugs vertically position and
interlock narrow-width rolls. Plugs eliminate edge
damage while lowering packaging costs through
pallet-packs (individual cartons are no longer needed
for shipping). They are molded from high-impact
thermoplastic HDPE resin. Sampling is recommended.
Caplugs No.
D2990P
D9999P
D6003P
Size
Description
3"
3"
6"
Medium duty
Heavy duty
Standard
D Series
Packaging
Pieces
450
450
224
Lbs
22
35
47
Material: HDPE Color: Black
136
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
137
plugs
core plugs
AP Series
Anchor Plugs
Anchor Plugs
AP Series anchor plugs provide a unique selflocking mechanism to permanently bond spool
components so they do not separate. A vital
component for any spool.
• Inner ribs provide extra protection
Caplugs No.
AP3058
AP3100
AP3125
Size
Description
3"
3"
3"
With 5/8" diameter Arbor hole
With 1" diameter Arbor hole
With 1-1/4" diameter Arbor hole
AP Series
Packaging
Pieces
650
650
650
Lbs
29
29
29
• Molded from high-impact HIPS resin for
superior strength
• No gluing or other secondary operations
necessary
Material: HIPS Color: Black
PDP Series
PDP Series pad plugs are made with strong, highimpact materials specifically designed to secure and
protect rolls from edge damage during storage and
shipping. These plugs can be used to suspend and
unitize larger-diameter rolls shipped on end, lowering
overall costs. Integral extension plugs are included.
Material: HDPE Color: Black
CPR Series
Pad Plugs
Pad Plugs
Caplugs No.
PDP-450
PDP-562
PDP-718
PDP-0550-187
PDP-0550-275
Size
Description
4-1/2"
5-5/8"
7-3/16"
5-1/2"
5-1/2"
Square shape with 2" extension plug
Octagon shape with 2" extension plug
Square shape with 3" extension plug
Square shape with 1-7/8" extension plug
Square shape with 2-3/4" extension plug
Packaging
Pieces
250
250
120
175
150
Lbs
16
21
21
Suspension Plugs
Suspension Plugs
CPR Series suspension plugs are made from strong,
high-impact resistant materials, designed to provide
the strength and ruggedness required to maintain
integrity when suspending very large rolls. There
are multiple diameters available. Sampling is
recommended.
PDP Series
Caplugs No.
CPR-304
Size
Description
3"
4" extension
CP Series
Packaging
Pieces
1960
Lbs
233
Material: Nylon Color: Black or White
138
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
139
plugs
core plugs
CH Series
CH Series roll suspension channels are made
with high-quality aluminum and can be cut to
specific lengths. Multiple widths are available.
Material: Aluminum Color: Silver
EB Series
Roll Suspension Channels
Roll Suspension Channels
Roll Suspension Component
Caplugs No.
CH075
CH100
CU100
Size
Description
3/4"
1"
1"
32" long Aluminum “H” channel
32" long Aluminum “H” channel
32" long Aluminum “U” channel
CH Series
Packaging
Pieces
250
250
400
Roll Suspension Component
Lbs
150
150
175
EB Series
EB Series roll suspension component is made from
high-quality particle board or plywood, ranging in
thickness from 1/8" to 1-1/2". It is designed to withstand
the weight of very large rolls and engineered and cut to
meet your specific requirements.
Contact Caplugs for more information.
Material: High-Quality Particle Board Color: Tan
140
* Alternative Materialien und Farben sind möglich | Weitere Abmessungen, Preise, Sonderanfertigungen und kostenlose Muster auf Anfrage: STOHRER IPT AG | In den Entenäckern 30 | D 70599 Stuttgart | [email protected] | Tel. + 49 711 90071 0 | www.stohrer-ipt.ag
141

Bruto prijs Rodcraft luchtgereedschap