Preisanpassung ab 1. September 2015 + 4,5% Zahn- und Keilriemenscheiben sowie Taper-Buchsen + 15,0% Price adaption as of the 1st of September 2015 + 4.5% V-belt and timing-belt pulleys as well as Taper-Bushes + 15.0% DESCH Preisliste / Price List Antriebselemente und schaltbare Kupplungen Drive elements and switchable couplings PA 15 D Inhalt Taper-Spannbuchsen - Maße S.3 Erläuterungen und Bedingungen S.4 TB-Keilriemenscheiben „SPZ“ S.6-7 TB-Keilriemenscheiben „SPA“ S. 8-9 TB-Keilriemenscheiben „SPB“ S.10-12 TB-Keilriemenscheiben „SPC“ S.12-13 Zahnriemenscheiben - TB-L S.14 Zahnriemenscheiben - TB-H S.15 Zahnriemenscheiben - TB-5M, TB-8M S.16 Zahnriemenscheiben - TB-14M, S.17 Zahnriemenscheiben - XL, L S.18 Zahnriemenscheiben - H, 3M S.19 Zahnriemenscheiben - 5M, 8M S.20 Zahnriemenscheiben - 8M, 14M S.21 Zahnriemenscheiben - T2,5,T5, S.22 Zahnriemenscheiben - T10, AT5 S.23 Zahnriemenscheiben - AT5, AT10 S.24 AnschraubnabenS.25 EinschweißnabenS.25 Pex-Kupplungen S.26 DESCH HRC-Wellenkupplungen S.27 DESCH Flex-Wellenkupplungen S.28-29 Hadeflex®-Kupplungen „F“ S.30 Hadeflex®-Kupplungen „TX“ S.30 Hadeflex®-Kupplungen „X“ S.31 Orpex®-Kupplungen „WN“ S.31 Habix®-KupplungenS.32 Habix®-Plus-KupplungenS.32 Ferroflex®N-KupplungenS.33 DESCH Zahnkupplungen S.34 Mini-Kupplungen S.34 Schalenkupplungen DIN 115 S.35 Starre Kupplungen Stahl / Edelstahl S.35 Scheibenkupplungen DIN 116 S.35 Spannschienen DIN 42923 S.36 MotorspannschienenS.36 StahlspannschienenS.37 MotorschlittenS.37 Gleitlager DIN 502-504 S.38 Deckellager DIN 505-506 S.39 Planox®-Reibkupplungen PM S.40 SchaltvorrichtungenS.40 Conax®-Reibkupplungen CM S.41 Conax®-Reibkupplungen CR S.41 Taper-SpannbuchsenS.42 Notizen S.43 2 GB Contents Taper bushes - dimensions P.3 Explanatory remarks and conditions P.5 TB V-belt pulleys „SPZ“ P.6-7 TB V-belt pulleys „SPA“ P.8-9 TB V-belt pulleys „SPB“ P.10-12 TB V-belt pulleys „SPC“ P.12-13 Timing belt Pulleys - TB-L P.14 Timing belt Pulleys - TB-H P.15 Timing belt Pulleys - TB-5M, TB-8M P.16 Timing belt Pulleys - TB-14M, P.17 Timing belt Pulleys - XL, L P.18 Timing belt Pulleys - H, 3M P.19 Timing belt Pulleys - 5M, 8M P.20 Timing belt Pulleys - 8M, 14M P.21 Timing belt Pulleys - T2,5,T5, P.22 Timing belt Pulleys - T10, AT5 P.23 Timing belt Pulleys - AT5, AT10 P.24 Screw-on hubs P.25 Welded hubs P.25 Pex couplings P.26 DESCH HRC shaft couplings P.27 DESCH Flex shaft couplings P.28-29 Hadeflex® couplings „F“ P.30 Hadeflex® couplings „TX“ P.30 Hadeflex® couplings „X“ P.31 Orpex® couplings „WN“ P.31 Habix® couplings P.32 Habix®-Plus-couplingsS.32 Ferroflex®N-couplingsS.33 DESCH Gears couplings S.34 Mini couplings P.34 Clamp couplings DIN 115 P.35 Clamp couplings Steel / Stainless Steel P.35 Flange couplings DIN 116 P.35 Slide rails DIN 42923 P.36 Motor slide rails P.36 Steel slide rails P.37 Motor slides P.37 Friction bearings DIN 502-504 P.38 Cap bearings DIN 505-506 P.39 Planox® friction clutches PM P.40 SwitchgearP.40 Conax® friction clutches CM P.41 Conax® friction clutches CR P.41 Taper bushes P.42 Notes P.43 D DESCH-Taper -Spannbuchse mit Nut nach DIN 6885 Teil1, Nutbreitentoleranzfeld:JS9 GB DESCH Taper Bush with Groove acc. to DIN 6885 Part1, Groove Width Tolerance Zone:JS9 Bohrungs Ø- d2 der vorrätigen Buchsen Buchsen Nr. Bush No 1008 Hole Ø d2 of available bushes mm mm mm mm mm mm mm mm mm mm mm 10 11 12 14 16 18 19 20 22 24* 25* mm 1108 10 11 12 14 16 18 19 20 22 24 25 28* 1210 11 12 14 16 18 19 20 22 24 25 28 30 mm mm mm mm mm mm 14 16 18 19 20 22 24 25 28 30 32 35 38 40 42* 2012 14 16 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50 2517 16 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50 55 60 65 70 75 95 100* 105 110 115* 3020 25 28 30 32 35 38 40 42 45 48 50 55 35 38 40 42 45 48 50 55 60 65 70 75 3525 35 38 40 42 45 48 50 55 60 65 70 75 80 85 90 3535 35 38 40 42 45 48 50 55 60 65 70 75 80 85 90 4030 40 42 45 48 50 55 60 65 70 75 80 85 90 95 100 4040 40 42 45 48 50 55 60 65 70 75 80 85 90 95 100 115 120 125 4535 55 60 65 70 75 80 85 90 95 100 105 110 4545 55 60 65 70 75 80 85 90 95 100 105 110 5040 70 75 80 85 90 95 100 105 110 115 120 125 5050 70 75 80 85 90 95 100 105 110 115 120 125 1008 Bohrungs-Ø Hole Ø d2 24*/25* Nutbreite Groove width b 8 Nuttiefe Groove depth t2 2 / 1,3 1108 28* 8 2 1610/1615 42* 12 2,2 2517 65* 18 2,3 3525 100* 28 4,4 4030 115* 32 5,4 Buchsen Nr. Bush No. mm 60 65* 32 1610/1615 3030 mm > * Diese Bohrung ist mit Flachnut ausgeführt ** für Innensechskantschrauben > * This hole has a shallow groove ** for hexagon socket screws 3 D Erläuterungen und Bedingungen zur Preisliste Unsere Preise stellen keine Preisempfehlung für den Weiterverkauf dar. Vom Bezugsvolumen abhängige Rabatte erhalten Sie auf Anfrage. Wir liefern ausschließlich zu unseren „Allgemeinen Bedingungen für die Lieferung von Maschinen und Maschinenteilen“. Mit Erscheinen dieser Preisliste verlieren alle frühren Preislisten ihre Gültigkeit. Irrtum vorbehalten. Mindermengenzuschlag: Zur Deckung der Kosten bei Kleinstaufträgen wird bei einem Bestellwert unter Euro 100,00 netto ein Mindermengenzuschlag von Euro 15,00 netto erhoben. Bitte disponieren Sie entsprechend. Allgemeine Erläuterungen Auswuchten: Auswuchten in zwei Ebenen Gütestufe G6, 3 oder feiner, empfehlen wir für Betriebsdrehzahlen, wenn V >30m/s oder das Verhältnis Wirkdurchmesser dw zu Kranzbreite b2 < 4 ist und V > 20m/s. Mehrpreis nach Angabe der max. Betriebsdrehzahl auf Anfrage. Auf Wunsch erstellen wir ein Wuchtprotokoll. Nuten: Die Listenpreise enthalten die Kosten für eine Naben-Nut nach den Normblättern. Passfedern Nuten DIN 6885 Teil1 Keile Nuten DIN 6886 Nasenkeile Nuten DIN 6887 Mehrpreis für anormale Nuten auf Anfrage. Passfedern und Keile: Werden auf besondere Bestellung gegen Mehrpreis mitgeliefert. Bohrungen: Die Listenpreise gelten für normale Fertigbohrungen nach DIN 7154, Toleranzfeld H7. Bohrungen mit anormalem Toleranzfeld auf Anfrage. Kürzung der Nabe: Für Kupplungen beträgt der Mehrpreis für Kürzung beider Naben +10%, für Kürzung einer Nabe +5% des Preises der fertiggebohrten Kupplung. Technische Daten entnehmen Sie bitte unseren Druckschriften. 4 GB Explanatory Remarks and Conditions for our Price List Our prices are not recommended prices for resale. Discounts related to quantity purchased can be obtained on request. We supply exclusively in accordance with our „General Terms and Conditions for the Supply of Machines and Machine parts“. This price list supersedes all previous price lists, which cease to be valid as soon as it appears. The right to correct any errors is reserved. Minimum quantity supplement: To cover costs in the case of very small orders a minimum quantity supplement of EUR 15.00 net will be charged for a purchase value of under EUR 100.00 net. Please make your arrangements accordingly. General Explanatory Remarks Balancing: We recommend balancing on two levels grade G6, 3 or finer for operational speeds where V >30m/s or the ratio of effective diameter dw to rim width is b2 < 4 and V > 20m/s. Additional charge according to indication of max. operational speed available on request. If required we will draw up a balancing report. Grooves: The list prices include the costs for a hub groove according to the norm sheets. Feather keys Wedges Nose keys Grooves DIN 6885 Part1 Grooves DIN 6886 Grooves DIN 6887 Additional charge for abnormal grooves available on request. Feather keys and wedges: Will be supplied on special order at an extra charge. Holes: The list prices apply for normal finished bores holes according to DIN 7154, Tolerance zone H7. Holes with abnormal tolerance zone on request.. Shortening of hub: For clutches the additional charge for the shortening of both hubs is +10%, for shortening one hub the additional charge is +5% of the price for the clutch with finished bore.. Technical data can be found in our catalogues. 5 D Vorrats-Keilscheiben für Taper -Spannbuchsen GB Stock V-belt Pulleys for Taper Bushes SPZ SPZ Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. 56 60 63 67 71 75 80 85 90 95 6 Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. EUR 100 Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 1 1008 0585592 44,50 1 1210 0445140 61,60 2 1008 0489833 51,10 2 1610 0445144 70,20 1 1008 0585259 45,60 3 1610 0445148 86,50 2 1108 0585594 53,50 4 1610 0445152 106,00 5 2012 0585268 124,00 1 1610 0445160 63,50 74,70 1 1108 0445000 47,10 2 1108 0445004 55,70 3 1108 0445008 71,10 2 1610 0445164 106 1 1108 0445016 47,50 3 1610 0445168 89,80 2 1108 0445020 57,60 4 1610 0445172 111,00 5 2012 0585270 130,00 1 1610 0445180 68,10 3 1108 0445024 73,20 1 1108 0445032 48,40 112 2 1108 0445036 59,10 2 1610 0445184 77,60 3 1108 0445040 74,70 3 2012 0445188 93,30 1 1108 0445048 49,80 4 2012 0445192 112,00 2 1210 0445052 59,90 5 2012 0585272 139,00 118 3 1210 0445056 76,00 1 1610 0445200 73,20 1 1210 0445064 51,10 2 1610 0445204 81,20 2 1210 0445068 61,60 3 2012 0445208 101,00 3 1210 0445072 77,60 4 2012 0445212 115,00 4 1210 0585261 81,90 5 2012 0585274 144,00 1 1610 0445224 77,60 2 1610 0445228 85,00 1 1210 0445080 52,10 2 1610 0445084 62,40 125 3 1610 0445088 79,60 3 2012 0445232 104,00 4 1610 0585262 96,70 4 2012 0445236 123,00 5 2012 0585276 146,00 1 1610 0445248 81,20 5 1610 0585263 115,00 1 1210 0445100 53,50 132 2 1610 0445104 64,30 2 1610 0445252 89,80 3 1610 0445108 81,20 3 2012 0445256 107,00 4 1610 0585264 103,00 4 2012 0445260 128,00 5 1610 0585265 116,00 5 2517 0585278 148,00 140 1 1210 0445120 58,80 1 1610 0445272 83,60 2 1610 0445124 65,70 2 1610 0445276 93,30 3 1610 0445128 82,60 3 2012 0445280 112,00 4 1610 0585266 104,00 4 2012 0445284 131,00 5 1610 0585267 120,00 5 2517 0585280 153,00 SPZ SPZ Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 150 160 170 180 190 200 224 250 1 1610 Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 0445300 88,30 Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 280 Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 1 2012 0489836 182,00 2 2012 0445304 97,40 2 2012 0445472 205,00 3 2012 0445308 119,00 3 2517 0445476 236,00 4 2517 0445312 139,00 4 2517 0445480 290,00 5 2517 0489837 344,00 1 2012 0489838 213,00 5 2517 0585282 160,00 1 1610 0445328 93,30 2 2012 0445332 103,00 2 2012 0445500 236,00 3 2012 0445336 123,00 3 2517 0445504 275,00 4 2517 0445340 144,00 4 2517 0445508 334,00 5 2517 0585284 168,00 5 2517 0489839 395,00 315 355 1 1610 0585286 97,90 2 2012 0445528 283,00 2 2012 0585287 112,00 3 2517 0445532 345,00 3 2012 0585288 132,00 4 2517 0445536 407,00 4 2517 0585289 154,00 5 2517 0585313 482,00 5 2517 0585290 173,00 2 2517 0445556 328,00 1 1610 0445356 103,00 3 2517 0445560 406,00 2 2012 0445360 122,00 4 2517 0445564 477,00 3 2012 0445364 143,00 4 2517 0445368 164,00 5 2517 0585292 177,00 1 1610 0585294 107,00 2 2012 0585295 129,00 3 2012 0585296 144,00 4 2517 0585297 167,00 5 2517 0585298 184,00 1 2012 0445384 112,00 2 2012 0445388 136,00 3 2012 0445392 145,00 4 2517 0445396 169,00 5 2517 0489834 191,00 1 2012 0445412 130,00 2 2012 0445416 153,00 3 2012 0445420 177,00 4 2517 0445424 212,00 5 2517 0585302 240,00 1 2012 0445440 144,00 2 2012 0445444 173,00 3 2012 0445448 205,00 4 2517 0445452 250,00 5 2517 0489835 290,00 400 > Un-/Vorgebohrte Keilriemenscheibe kurzfristig lieferbar. / Auf Anfrage > Unbored/pre-bored V-belt pulley available at short term. / on request 7 SPA SPA Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. Art.-Nr / No. EUR 0445844 88,30 62,40 2 1610 0445848 97,40 58,80 3 2012 0445852 119,00 64,80 4 2012 0445856 143,00 59,90 5 2012 0489856 168,00 1 1610 0445864 91,60 2 2012 0487024 103,00 70,30 3 2012 0445872 123,00 4 2517 0445876 145,00 5 2517 0489857 171,00 1 1610 0445884 97,40 57,10 2 1108 0585338 71 1 1108 0585339 2 1108 0585340 75 1 1108 0585342 2 1108 0585590 68,70 80 1 1210 0445700 60,20 2 1210 0445704 90 95 100 106 112 118 Preis ohne Taper Buchse Price without taper bush 1610 EUR 0585337 1 1108 Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 1 Art.-Nr / No. 67 85 8 Preis ohne Taper Buchse Price without taper bush 3 1210 0445708 86,50 1 1210 0445712 61,20 125 132 140 2 1210 0445716 71,10 3 1210 0445720 89,80 2 2012 0445888 106,00 2517 0445892 131,00 1 1210 0448624 63,50 3 2 1610 0448628 72,10 4 2517 0445896 153,00 5 2517 0489870 177,00 1 1610 0445904 100,00 3 1610 0445732 93,30 4 1615 0445736 112,00 150 1 1210 0448632 67,10 2 2012 0445908 112,00 2 1610 0445748 76,00 3 2517 0445912 139,00 3 1610 0445752 97,40 4 2517 0445916 159,00 4 1615 0445756 112,00 5 2517 0489871 179,00 160 1 1610 0445764 70,60 1 1610 0445924 104,00 2 1610 0445768 81,20 2 2012 0445928 115,00 3 1610 0445772 101,00 3 2517 0445932 144,00 4 2517 0445936 164,00 5 2517 0489872 187,00 1 1610 0585383 112,00 4 1615 0445776 123,00 5 1615 0489854 146,00 170 1 1610 0445784 74,70 2 1610 0445788 85,00 2 2012 0585384 130,00 3 1610 0445792 106,00 3 2517 0585563 153,00 4 2012 0487023 127,00 4 2517 0585567 173,00 5 2012 0585346 152,00 5 3020 0585568 194,00 1 1610 0445804 79,60 1 1610 0445944 115,00 180 2 1610 0445808 89,80 2 2012 0448640 132,00 3 2012 0445812 111,00 3 2517 0445952 155,00 4 2012 0445816 130,00 4 2517 0445956 176,00 5 3020 0489873 204,00 1 1610 0585385 127,00 2012 0585386 147,00 5 2012 0585253 156,00 1 1610 0445824 83,60 190 2 1610 0445828 93,30 2 3 2012 0445832 112,00 3 2517 0585564 166,00 4 2012 0445836 136,00 4 2517 0585569 185,00 5 2012 0489855 164,00 5 3020 0585570 216,00 SPA SPA Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 200 212 224 236 250 280 300 315 Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 1 2012 0445964 128,00 2 2517 0445968 3 2517 0445972 4 3020 5 3020 1 2 Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 1 2012 0446064 291,00 148,00 2 2517 0446068 322,00 168,00 3 3020 0446072 391,00 0445976 187,00 4 3020 0446076 470,00 0489874 216,00 5 3535 0446080 551,00 2012 0585980 153,00 1 2012 0446084 343,00 2517 0585981 171,00 2 2517 0446088 374,00 3 2517 0585410 199,00 3 3020 0446092 470,00 4 3020 0585982 238,00 4 3020 0446096 551,00 5 3020 0093622 245,00 5 3535 0446100 652,00 1 2012 0445984 153,00 2 2517 0446108 445,00 2 2517 0445988 173,00 3 3020 0446112 557,00 3 2517 0445992 200,00 4 3020 0446116 657,00 4 3020 0445996 240,00 5 3535 0446120 797,00 355 400 450 5 3020 0446000 275,00 2 2517 0446128 491,00 1 2012 0585387 171,00 3 3020 0446132 648,00 2 2517 0585388 197,00 4 3020 0446136 745,00 3 2517 0585573 232,00 5 3535 0446140 910,00 4 3020 0585565 285,00 3 3020 0446144 721,00 5 3020 0585571 323,00 4 3535 0446148 847,00 1 2012 0446004 173,00 5 3535 0446152 1.032,00 2 2517 0446008 200,00 3 3020 0446156 826,00 3 2517 0446012 236,00 4 3535 0446160 991,00 4 3020 0446016 286,00 5 3535 0446164 1.265,00 5 3020 0446020 327,00 1 2012 0489875 213,00 2 2517 0446028 236,00 3 2517 0446032 271,00 4 3020 0446036 334,00 5 3535 0446040 389,00 1 2012 0585389 240,00 2 2517 0585390 266,00 3 3020 0585391 313,00 4 3020 0585566 381,00 5 3535 0585572 423,00 1 2012 0489876 243,00 2 2517 0446048 267,00 3 3020 0446052 315,00 4 3020 0446056 382,00 5 3535 0446060 451,00 500 560 630 > Un-/Vorgebohrte Keilriemenscheibe kurzfristig lieferbar. / Auf Anfrage > Unbored/pre-bored V-belt pulley available at short term. / on request 9 SPB SPB Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 100 112 118 125 132 140 150 160 170 10 Preis ohne Taper Buchse Price without taper bush Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. Art.-Nr / No. EUR 1 1610 0585351 101,00 170 2 1610 0585352 107,00 180 3 1610 0585353 127,00 1 1610 0585354 103,00 2 1610 0585355 112,00 Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 6 3020 0446292 266,00 1 1610 0446296 143,00 2 2517 0483731 168,00 3 2517 0446304 191,00 4 2517 0446308 212,00 3 1610 0585356 129,00 5 3020 0446312 243,00 1 1610 0585357 106,00 6 3020 0446316 271,00 2 1610 0585358 113,00 8 3030 0489952 504,00 190 3 1610 0585359 131,00 1 2012 0446324 147,00 1 1610 0585360 107,00 2 2517 0446328 177,00 2 2012 0489943 116,00 3 2517 0446332 200,00 3 2012 0489944 136,00 4 2517 0446336 225,00 4 2012 0489945 156,00 5 3020 0446340 252,00 5 2012 0585361 182,00 6 3020 0446344 278,00 1 1610 0585362 115,00 8 3030 0489953 526,00 2 2012 0489946 128,00 1 2012 0446352 153,00 3 2012 0489947 148,00 2 2517 0446356 185,00 4 2012 0489948 176,00 3 2517 0446360 204,00 200 5 2517 0489949 204,00 4 3020 0446364 236,00 1 1610 0446200 116,00 5 3020 0489954 265,00 2 2012 0483608 129,00 6 3020 0446372 296,00 3 2012 0483609 159,00 8 3535 0446376 544,00 4 2517 0483727 181,00 1 2012 0446380 168,00 5 2517 0483728 212,00 2 2517 0446384 202,00 6 2517 0489950 243,00 3 2517 0446388 219,00 1 1610 0446224 124,00 4 3020 0446392 247,00 2 2012 0483729 136,00 5 3020 0489961 275,00 3 2517 0483730 167,00 6 3535 0446400 344,00 4 2517 0483610 187,00 8 3535 0446404 607,00 5 2517 0446240 216,00 1 2012 0446408 179,00 6 2517 0489951 245,00 2 2517 0446412 208,00 1 1610 0446248 128,00 3 2517 0446416 240,00 2 2012 0446252 143,00 4 3020 0446420 288,00 3 2517 0446256 173,00 5 3020 0489962 332,00 4 2517 0446260 199,00 6 3535 0446428 395,00 5 2517 0446264 227,00 8 3535 0446432 651,00 10 3535 0446436 821,00 1 2012 0446440 187,00 212 224 6 3020 0448754 254,00 1 1610 0446272 132,00 2 2012 0446276 153,00 2 2517 0446444 219,00 3 2517 0446280 177,00 3 2517 0446448 263,00 4 2517 0446284 204,00 4 3020 0446452 316,00 5 3020 0446288 236,00 5 3535 0446456 360,00 236 SPB SPB Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 236 250 280 300 315 335 355 6 Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 3535 0446460 430,00 Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 355 Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 6 3535 0446576 787,00 8 3535 0446464 681,00 8 3535 0446580 1.018,00 10 3535 0446468 863,00 10 4040 0446584 1.300,00 1 2012 0446472 200,00 2 3020 0099600 419,00 2 2517 0446476 237,00 3 3020 0173800 512,00 3 3020 0446480 278,00 4 3535 0552957 603,00 4 3020 0446484 345,00 6 3535 0555687 847,00 5 3535 0446488 392,00 8 4040 0174943 1.101,00 6 3535 0446492 457,00 2 3020 0446588 454,00 8 3535 0446496 689,00 3 3535 0446592 561,00 10 3535 0446500 897,00 4 3535 0446596 659,00 1 2012 0585364 268,00 5 3535 0446600 780,00 2 2517 0446504 278,00 6 3535 0446604 919,00 3 3020 0446508 323,00 8 4040 0446608 1.202,00 4 3020 0446512 405,00 10 4040 0446612 1.559,00 5 3535 0446516 461,00 2 3020 0176798 491,00 6 3535 0446520 529,00 3 3535 0176799 614,00 8 3535 0446524 749,00 4 3535 0170612 727,00 10 3535 0446528 994,00 6 4040 0540029 1.012,00 2 2517 0706198 300,00 8 3535 0170739 1.363,00 3 3020 0552691 353,00 2 3020 0446616 527,00 4 3535 0585671 431,00 3 3535 0446620 669,00 5 3535 0585672 504,00 4 3535 0446624 790,00 6 3535 0585673 599,00 5 3535 0446628 955,00 8 3535 0544703 850,00 6 4040 0446632 1.107,00 2 2517 0446532 321,00 8 4040 0446636 1.524,00 3 3020 0446536 376,00 10 4545 0446640 1.798,00 4 3535 0446540 457,00 2 3020 0446644 591,00 5 3535 0446544 541,00 3 3535 0446648 770,00 6 3535 0446548 665,00 4 3535 0446652 893,00 8 3535 0446552 852,00 5 3535 0446656 1.094,00 10 3535 0446556 1.116,00 6 4040 0446660 1.263,00 2 2517 0585366 358,00 8 4040 0446664 1.781,00 3 3020 0585367 423,00 10 4545 0446668 2.043,00 4 3535 0585368 511,00 3 3535 0446672 871,00 5 3535 0585369 603,00 4 3535 0446676 1.010,00 6 3535 0585370 730,00 5 4040 0446680 1.243,00 8 3535 0585371 935,00 6 4040 0446684 1.431,00 2 3020 0446560 388,00 8 4545 0446688 2.033,00 3 3020 0446564 469,00 10 4545 0446692 2.325,00 4 3535 0446568 557,00 3 3535 0446696 991,00 5 3535 0446572 659,00 4 3535 0446700 1.189,00 375 400 425 450 500 560 630 11 SPC SPB Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 710 800 900 1000 > > Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 5 4040 0446704 1.426,00 6 4040 0446708 8 4545 0446712 Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. Art.-Nr / No. EUR 3 3020 0446840 557,00 1.671,00 4 3535 0446844 623,00 2.328,00 5 3535 0446848 747,00 224 10 4545 0446716 2.681,00 6 3535 0446852 836,00 3 3535 0446720 1.161,00 8 3535 0447218 1.032,00 4 3535 0446724 1.369,00 3 3020 0467191 629,00 5 4040 0446728 1.732,00 4 3535 0467192 760,00 6 4040 0446732 1.972,00 5 3535 0467193 825,00 236 8 4545 0446736 2.601,00 6 3535 0467194 927,00 10 4545 0446740 3.094,00 8 3535 0467195 1.094,00 3 3535 0446744 1.608,00 3 3020 0446856 637,00 4 4040 0446748 1.822,00 4 3535 0446860 712,00 5 4040 0446752 2.256,00 5 3535 0446864 797,00 6 4545 0446756 2.510,00 6 3535 0446868 909,00 250 8 4545 0446760 3.168,00 8 3535 0447242 1.186,00 10 4545 0446764 3.651,00 10 4040 0487484 1.592,00 4 4040 0446772 2.439,00 3 3535 0467196 682,00 5 4040 0446776 2.656,00 4 3535 0467197 825,00 6 4545 0446780 3.417,00 5 3535 0467198 916,00 8 4545 0446784 3.889,00 6 3535 0467199 1.028,00 10 5050 0446788 4.754,00 8 3535 0467200 1.262,00 4 4040 0446796 3.084,00 3 3535 0446872 713,00 5 4545 0446800 3.465,00 4 3535 0446876 803,00 6 4545 0446804 4.089,00 5 3535 0446880 928,00 8 5050 0446808 4.909,00 6 3535 0446884 1.057,00 10 5050 0446812 5.787,00 Un-/Vorgebohrte Keilriemenscheibe kurzfristig lieferbar. / Auf Anfrage Unbored/pre-bored V-belt pulley available at short term. / on request 265 280 300 315 12 Preis ohne Taper Buchse Price without taper bush 8 3535 0447266 1.318,00 10 3535 0487485 1.715,00 3 3535 0467201 795,00 4 3535 0467202 885,00 5 3535 0467203 1.001,00 6 3535 0467204 1.101,00 8 4040 0467205 1.477,00 10 4545 0487486 1.813,00 3 3535 0447290 797,00 4 3535 0446888 874,00 5 3535 0446892 982,00 6 3535 0446896 1.143,00 8 4040 0447294 1.585,00 10 4545 0487487 1.909,00 12 5050 0097805 3.485,00 SPC SPC Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 335 355 375 400 425 450 475 3 4 5 6 8 10 12 3 4 5 6 8 10 12 3 4 5 6 8 10 12 3 4 5 6 8 10 12 3 4 5 6 8 10 12 3 4 5 6 8 10 12 3 4 3535 3535 3535 3535 4040 4545 5050 3535 3535 3535 3535 4040 4545 5050 3535 3535 3535 4040 4545 4545 5050 3535 3535 3535 4040 4545 5050 5050 3535 3535 3535 4040 4545 5050 5050 3535 3535 4040 4545 5050 5050 5050 3535 3535 Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. 0467206 0467207 0467208 0467209 0467210 0094230 0710387 0447318 0446900 0446904 0446908 0446912 0487488 0098445 0467211 0467212 0467213 0467214 0467215 0096811 0710386 0447342 0446916 0446920 0446924 0446928 0487489 0170184 0467216 0467217 0467218 0467219 0467220 0708370 0172182 0447346 0447350 0446932 0446936 0446940 0446944 0710451 0585604 0585605 EUR 839,00 982,00 1.112,00 1.283,00 1.684,00 2.036,00 3.590,00 871,00 982,00 1.124,00 1.301,00 1.712,00 2.100,00 3.695,00 939,00 1.094,00 1.235,00 1.452,00 1.870,00 2.248,00 3.845,00 1.088,00 1.220,00 1.324,00 1.554,00 1.916,00 2.342,00 4.078,00 1.147,00 1.291,00 1.412,00 1.673,00 2.126,00 2.441,00 4.240,00 1.225,00 1.408,00 1.574,00 1.737,00 2.187,00 2.457,00 4.415,00 1.280,00 1.452,00 Wirk.Ø Rillen Buchsen Nr. Effective.Ø Grooves Bush No. 475 500 560 630 710 800 1000 1250 5 6 8 10 12 4 5 6 8 10 12 4 5 6 8 10 12 5 6 8 10 12 5 6 8 10 12 5 6 8 10 12 5 6 8 10 12 5 6 8 10 12 4040 4545 5050 5050 5050 3535 4040 4545 5050 5050 5050 4040 4545 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 5050 Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. 0585606 0585607 0585608 0092304 0096159 0447358 0446948 0446952 0446956 0446960 0094342 0447366 0446964 0446968 0446972 0446976 0171677 0446980 0446984 0446988 0446992 0171200 0446996 0447000 0447004 0447008 0098457 0447012 0447016 0447020 0447024 0097441 0447400 0447404 0447408 0467221 0175353 0447418 0447422 0447426 0467222 0171940 EUR 1.677,00 1.829,00 2.370,00 2.661,00 4.635,00 1.494,00 1.778,00 1.954,00 2.554,00 2.926,00 5.065,00 1.779,00 1.968,00 2.168,00 2.801,00 3.141,00 5.495,00 2.256,00 2.531,00 3.080,00 3.638,00 6.331,00 2.688,00 3.025,00 3.700,00 4.301,00 7.447,00 3.094,00 3.302,00 3.975,00 4.828,00 8.051,00 4.055,00 4.606,00 5.925,00 6.734,00 11.688,00 5.486,00 6.163,00 7.619,00 8.929,00 15.428,00 > Un-/Vorgebohrte Keilriemenscheibe kurzfristig lieferbar. / Auf Anfrage > Unbored/pre-bored V-belt pulley available at short term. / on request 13 D Vorrats-Zahnriemenscheiben für Taper -Spannbuchsen GB Stock Timing belt Pulleys for Taper Bushes X TB-L Zähnezahl Riemenbreite Teethnumber Width of belt Bush No. 18 050 075 100 19 20 21 22 23 24 25 26 27 28 14 TB-L Buchsen Nr. Preis ohne Taper Buchse Price without taper bush Zähnezahl Riemenbreite Width of belt Bush No. Art.-Nr / No. EUR Teethnumber 1108 0091172 29,60 30 1108 0043646 32,90 1108 0043668 35,80 32 Buchsen Nr. Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 050 1108 0043488 41,80 075 1108 0043657 47,90 100 1210 0043678 52,60 050 1108 0043637 45,00 050 1108 0043630 30,70 075 1108 0043647 34,50 075 1108 0043658 51,50 100 1210 0043679 57,50 100 1108 0043669 37,20 050 1108 0043631 31,10 075 1108 0043648 34,80 100 1108 0043670 38,00 36 40 050 1108 0043638 48,30 075 1610 0043659 57,20 100 1610 0049782 62,20 050 1610 0043639 56,70 050 1108 0043632 32,50 075 1108 0043649 36,10 075 1610 0043660 63,20 100 1610 0091174 67,40 050 1610 0043640 72,00 100 1108 0043671 39,50 050 1108 0043633 33,50 075 1108 0043650 37,20 075 1610 0043661 74,70 100 1108 0043672 40,40 100 1610 0091175 82,60 050 1108 0043281 34,50 075 1108 0043651 38,50 100 1108 0043673 43,20 050 1108 0043634 35,20 075 1108 0043652 39,90 100 1108 0041335 45,00 050 1108 0043635 36,10 075 1108 0043653 40,80 100 1108 0043674 46,90 050 1108 0043636 37,20 075 1108 0043654 41,80 100 1108 0043675 47,90 050 1108 0043282 38,00 075 1108 0043655 44,60 100 1108 0043676 49,20 050 1108 0043124 39,10 075 1108 0043656 46,40 100 1108 0043677 51,00 48 60 72 050 1610 0043641 83,50 075 1610 0043662 88,60 100 1610 0043682 97,90 050 1610 0043642 97,90 075 1610 0043663 110,00 TB-H TB-H Preis ohne Taper Buchse Zähnezahl Riemenbreite Teethnumber Width of belt Bush No. 16 100 18 19 20 21 22 23 24 25 26 27 28 30 32 Buchsen Nr. Price without taper bush Zähnezahl Riemenbreite Preis ohne Taper Buchse Buchsen Nr. Price without taper bush Art.-Nr / No. EUR Teethnumber Width of belt Bush No. 1108 0043687 35,80 36 100 1610 100 1210 0043688 41,50 150 1610 0043339 103,00 150 1210 0043338 50,30 200 2012 0043740 123,00 100 1610 0043700 93,30 150 1610 0043719 112,00 200 1210 0058214 55,20 100 1210 0041666 43,60 150 1210 0043707 51,90 40 44 Art.-Nr / No. EUR 0043699 83,50 200 2012 0043741 141,00 100 2012 0043701 104,00 150 2012 0043720 149,00 200 1610 0058215 58,60 100 1210 0043689 45,60 150 1210 0043708 53,80 200 1610 0051757 62,20 100 1210 0043690 47,90 150 2012 0043721 171,00 150 1210 0043709 55,70 200 2517 0043743 171,00 100 2012 0043702 130,00 200 1610 0058216 64,50 100 1210 0043691 50,30 150 1210 0043710 57,50 200 1610 0058217 67,40 100 1610 0043692 51,90 150 1610 0043711 59,00 200 1610 0058218 69,70 100 1610 0041668 53,80 150 1610 0043712 60,30 200 1610 0043733 72,00 100 1610 0043693 56,70 150 1610 0043713 64,10 200 1610 0043734 75,20 100 1610 0043694 58,60 150 1610 0043714 67,80 200 1610 0043735 79,40 100 1610 0043695 60,80 150 1610 0043715 71,00 200 1610 0043736 83,10 100 1610 0043696 63,20 150 1610 0043716 73,70 200 1610 0043737 87,40 100 1610 0043697 67,40 150 1610 0043717 80,20 200 1610 0043738 95,60 100 1610 0043698 73,70 150 1610 0043718 88,10 200 2012 0043739 105,00 48 60 200 2012 0043742 149,00 100 2012 0041667 141,00 15 TB-8M TB-5M Zähnezahl Riemenbreite Teethnumber Width of belt Bush No. Art.-Nr / No. EUR 36 15 1108 0099106 45,90 38 15 1108 0099107 49,20 40 15 1108 0099108 52,90 44 15 1108 0099109 57,50 50 1615 0044093 91,00 48 15 1210 0099110 65,50 85 1615 0044106 121,00 56 15 1210 0099111 71,50 20 1610 0044066 65,00 64 15 1210 0099112 70,40 30 1615 0044077 73,00 72 15 1610 0099113 87,40 50 2012 0044094 95,60 80 15 1610 0099114 94,30 85 2012 0044107 130,00 20 2012 0044067 73,00 Buchsen Nr. Preis ohne Taper Buchse X Price without taper bush Zähnezahl Riemenbreite Teethnumber Width of belt Bush No. 85 1615 38 40 44 TB-8M 48 Zähnezahl Teethnumber Riemenbreite Width of belt 30 24 26 28 30 32 34 36 16 Buchsen Nr. Bush No. 1108 Preis ohne Taper Buchse Price without taper bush 56 Buchsen Nr. Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 0044105 115,00 20 1610 0044065 59,80 30 1615 0041696 69,10 30 2012 0049949 83,50 50 2012 0044095 110,00 85 2012 0044108 143,00 20 2012 0044068 82,60 50 2012 0043070 93,30 50 2012 0044096 121,00 85 2517 0044109 161,00 20 2012 0044069 97,90 30 2012 0041699 115,00 Art.-Nr / No. EUR 50 2517 0041200 147,00 0049996 50,30 85 2517 0044110 199,00 20 1108 0041692 45,90 20 2012 0044070 121,00 30 1108 0044073 51,00 30 2517 0041700 137,00 64 20 1108 0044060 47,90 50 2517 0041907 176,00 30 1108 0044074 53,30 85 2517 0044111 239,00 20 1108 0043088 48,30 20 2012 0044071 143,00 30 1210 0041698 55,20 30 2517 0044078 168,00 50 1210 0044083 64,50 50 2517 0044097 205,00 20 1108 0044061 50,30 30 1615 0044075 56,70 50 1615 0044084 20 1610 0044062 72 85 3020 0043177 288,00 20 2012 0043069 161,00 69,10 30 2517 0044079 184,00 51,50 50 3020 0044098 245,00 30 1615 0044076 57,90 50 1615 0044085 73,70 80 90 85 3020 0044112 311,00 30 2517 0044080 215,00 20 1610 0044063 54,80 50 3020 0044099 278,00 30 1615 0041690 61,40 85 3020 0044113 363,00 30 2517 0044081 259,00 50 3020 0044100 355,00 85 3020 0044114 468,00 30 2517 0044082 340,00 50 1615 0044086 79,00 85 1615 0044104 105,00 20 1610 0044064 57,20 30 1615 0041691 63,60 112 144 TB-14M TB-14M Zähnezahl Riemenbreite Teethnumber Width of belt Bush No. 55 2012 29 30 32 34 36 38 40 44 Buchsen Nr. Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 0044138 168,00 Zähnezahl Riemenbreite Teethnumber Width of belt Bush No. 55 3020 Buchsen Nr. Preis ohne Taper Buchse Price without taper bush Art.-Nr / No. EUR 0044147 346,00 85 2517 0043165 211,00 85 3020 0044165 429,00 115 2517 0044176 296,00 115 3020 0044184 644,00 40 3020 0044128 340,00 55 3020 0044148 412,00 56 40 2012 0044119 152,00 55 2012 0044139 171,00 85 2517 0044158 217,00 85 3525 0044166 527,00 115 3535 0044185 658,00 115 2517 0044177 307,00 40 2012 0044120 161,00 55 2517 0044140 180,00 85 2517 0044159 228,00 115 2517 0044178 311,00 40 2012 0044121 171,00 55 2517 0044141 205,00 85 2517 0044090 254,00 115 2517 0058306 335,00 40 2517 0044122 180,00 55 2517 0044142 225,00 85 2517 0044160 288,00 115 2517 0044179 363,00 40 2517 0044123 201,00 55 2517 0044143 239,00 85 3020 0044161 303,00 115 3020 0044180 393,00 40 2517 0044124 211,00 55 2517 0044144 254,00 85 3020 0044162 311,00 115 3020 0044181 425,00 40 2517 0044125 227,00 55 2517 0044145 267,00 85 3020 0044163 335,00 115 3020 0044182 439,00 40 3020 0044126 247,00 55 3020 0044146 303,00 85 3020 0044164 397,00 115 3020 0044183 499,00 17 D Vorrats - Zahnriemenscheiben un-/vorgebohrt GB Stock Timing belt Pulleys un-/pre-bored XL L X Zähne- Riemenzahl breite L Zähne- Riemenzahl breite Teeth- Width of number belt Art.-Nr / No. EUR 10 037 0043388 12,50 11 037 0043389 13,10 12 037 0043390 13,50 14 037 0043391 13,90 15 037 0043392 16 037 0043393 18 037 0043394 15,40 20 037 0043395 21 037 0043396 22 037 0043397 16,80 24 037 0043437 18,60 26 037 0043398 19,50 28 037 0043399 20,00 30 037 0043400 32 037 0043401 36 037 0043402 24,30 40 037 0043403 26,00 42 037 0043404 31,10 44 037 0043405 32,90 48 037 0043406 34,80 60 037 0043407 39,10 72 037 0043408 45,90 Zähne- Riemenzahl breite Teeth- Width of number belt Art.-Nr / No. 10 EUR 050 0043409 13,90 075 0051905 15,40 100 0177932 16,80 050 0043410 15,40 14,50 075 0043438 14,80 100 0043382 050 0043411 15,80 15,80 075 0043439 16,10 100 0043457 12 13 14 0043418 24,30 075 0043447 26,50 100 0043465 29,10 050 0043419 24,70 16,10 075 0043448 27,00 17,70 100 0043466 31,10 050 0043420 26,00 17,70 075 0043303 29,60 19,50 100 0043467 32,90 050 0043412 16,80 0043440 19,50 100 0043458 21,00 050 0043413 18,60 20,40 075 0043441 22,40 100 0043459 16 17 18 19 20 21 22 24 26 050 0043306 29,60 075 0043449 32,50 100 0043468 34,80 050 0043123 31,50 20,40 075 0043450 33,50 21,80 100 0043469 37,50 28 30 050 0041788 19,50 050 0043421 32,90 075 0043442 21,50 075 0043451 37,20 100 0043460 22,70 100 0043470 40,40 050 0043414 20,40 075 0043443 22,70 100 0043461 24,30 050 0043415 21,80 075 0043444 100 0043462 32 050 0041589 35,80 075 0043452 39,10 100 0043471 43,20 050 0043422 41,80 24,30 075 0043302 46,90 25,00 100 0043383 51,50 050 0043416 22,70 075 0043445 25,00 100 0043463 26,50 050 0043417 23,70 075 0043446 26,00 100 0043464 27,40 36 40 44 48 18 EUR 050 075 15 Teeth- Width of number belt Art.-Nr / No. 050 0043423 46,90 075 0041834 55,20 100 0043472 56,70 050 0043424 51,50 075 0043453 60,80 100 0043473 68,30 050 0041827 56,70 075 0043304 67,40 100 0043474 72,00 H H 3M Zähne- Riemenzahl breite Zähne- Riemenzahl breite Zähne- Riemenzahl breite Teeth- Width of number belt Art.-Nr / No. Teeth- Width of number belt Art.-Nr / No. Teeth- Width of number belt Art.-Nr / No. 14 16 18 19 20 21 22 24 26 EUR 28 EUR 075 0051311 25,00 075 0058251 47,40 100 0043503 28,40 100 0043508 53,30 150 0043517 33,50 150 0043526 61,40 200 0043541 38,00 200 0043550 71,00 075 0058241 27,00 075 0058252 49,80 30 100 0043265 31,10 100 0043365 56,70 150 0043518 36,80 150 0043527 65,00 200 0043542 43,20 200 0043551 75,60 075 0058243 29,10 075 0058253 57,20 100 0043504 33,50 100 0043366 64,50 150 0043519 39,90 150 0043528 72,30 200 0043543 46,90 200 0043552 79,00 075 0058244 31,10 075 0058256 63,20 100 0043505 35,20 100 0043509 72,00 150 0043520 43,20 150 0043529 82,10 200 0043544 49,80 200 0043553 92,00 075 0058245 32,90 100 0041212 150 200 32 36 40 075 0058258 71,50 37,20 100 0043510 81,30 0043521 45,60 150 0043530 96,50 0043545 51,50 200 0043554 112,00 075 0057295 33,80 44 100 0043511 85,90 100 0043506 38,50 48 100 0043512 91,00 150 0043522 48,30 60 100 0043513 112,00 200 0043546 54,80 72 100 0043514 149,00 075 0058246 35,20 100 0043507 39,90 150 0043523 51,50 200 0043547 57,50 075 0058247 39,50 100 0041689 45,00 150 0043524 54,80 200 0043548 63,20 075 0058249 44,60 100 0041838 50,60 150 0043525 57,50 200 0043549 66,00 10 12 14 15 16 18 20 21 22 24 26 28 30 32 36 40 44 48 60 72 EUR 9 0043787 12,50 15 0043811 13,90 9 0043788 13,10 15 0043812 14,50 9 0043789 13,50 15 0043813 15,80 9 0043790 13,90 15 0043814 16,10 9 0043791 14,80 15 0043815 17,10 9 0043792 16,80 15 0043816 17,70 9 0043793 17,10 15 0043817 18,60 9 0043794 17,70 15 0043818 19,10 9 0043795 19,10 15 0043819 21,00 9 0043796 19,50 15 0043820 21,80 9 0043801 21,00 15 0043821 22,70 9 0043802 21,80 15 0043822 23,40 9 0043803 22,70 15 0043823 25,00 9 0043804 23,70 15 0043824 27,00 9 0043805 26,00 15 0043825 31,10 9 0043806 26,50 15 0043826 31,50 9 0043807 32,10 15 0043827 37,20 9 0043808 34,50 15 0043828 40,80 9 0043809 41,50 15 0043829 50,30 9 0052260 51,90 15 0043830 55,50 19 5M 5M Zähne- Riemenzahl breite Zähne- Riemenzahl breite Teeth- Width of number belt Art.-Nr / No. 12 14 15 16 18 20 21 22 24 26 28 30 32 20 8M Zähne- Riemenzahl breite X TeethEUR 9 0043831 13,50 15 0043850 15,40 25 0043869 19,10 9 0043832 14,50 15 0043851 25 0043870 9 0043833 14,80 15 0043852 25 0043871 9 0043834 15,80 15 0043853 18,60 25 0043872 22,40 9 0043835 17,10 15 0043854 25 0043873 Width of number belt Art.-Nr / No. 36 EUR Teeth- Width of number belt Art.-Nr / No. 22 EUR 9 0043844 28,40 20 0043134 31,10 15 0043863 32,50 30 0043916 35,80 25 0043882 41,80 50 0043931 46,90 9 0043845 29,60 85 0043944 59,80 16,10 15 0043864 34,80 20 0043898 33,50 20,40 25 0043883 47,90 30 0041566 38,00 9 0043846 35,20 50 0043932 48,70 17,10 15 0043865 40,80 85 0043945 65,00 21,50 25 0043884 57,50 20 0043899 35,80 40 44 48 24 26 9 0043847 38,00 30 0043294 40,80 15 0043866 45,60 50 0043933 53,30 25 0043885 62,20 85 0043946 69,70 9 0052172 47,90 20 0043900 38,00 19,50 15 0052299 51,60 30 0041502 44,60 23,40 25 0043886 77,50 50 0041500 59,00 85 0043947 80,20 20 0043901 40,40 30 0043377 48,30 60 72 28 9 0043836 18,60 9 0043849 57,50 15 0051966 18,80 15 0043868 67,40 25 0043874 24,30 25 0043887 92,30 9 0043837 19,50 50 0043934 61,70 15 0043856 21,80 85 0043948 85,90 25 0043875 25,60 20 0043902 44,20 9 0043838 20,40 30 0043917 51,00 15 0043857 22,70 50 0041499 67,40 25 0043876 27,00 85 0043949 90,10 9 0043839 21,50 20 0043903 46,90 15 0043858 24,30 30 0043918 53,80 25 0043877 29,10 50 0041450 71,00 9 0043840 22,40 85 0049702 97,40 15 0043859 24,70 20 0043904 49,20 25 0043878 29,00 30 0043919 57,50 9 0043841 23,40 50 0043935 76,10 15 0043860 26,00 85 0043951 108,00 25 0043879 33,50 20 0043905 52,90 9 0043842 22,20 30 0043920 61,70 15 0043861 28,40 50 0041353 82,10 25 0043880 36,80 85 0041497 112,00 9 0043843 26,00 20 0043906 57,50 15 0043862 30,70 30 0043921 67,40 25 0043881 39,50 50 0043936 85,90 85 0043952 123,00 30 32 34 36 38 40 8M 14M 14M Zähne- Riemenzahl breite Zähne- Riemenzahl breite Zähne- Riemenzahl breite Teeth- Width of number belt Art.-Nr / No. Teeth- Width of number belt Art.-Nr / No. Teeth- Width of number belt Art.-Nr / No. 44 48 56 64 72 80 90 112 144 168 192 EUR 20 0043907 67,40 30 0043922 77,10 50 0043072 85 0043953 20 0043908 73,70 30 0043923 50 0043937 85 0043954 158,00 20 0043133 95,60 30 0041503 50 0051986 85 0043955 192,00 20 0043182 112,00 30 0052222 50 0041189 85 28 EUR 40 0043962 119,00 55 0043982 147,00 100,00 85 0044002 139,00 115 0044020 40 0043963 128,00 85,90 55 0043983 112,00 85 0044003 115 0044021 244,00 40 0043964 136,00 113,00 55 0043984 139,00 85 0044004 115 0044022 254,00 40 0043965 146,00 130,00 55 0043985 161,00 85 0044005 0043956 228,00 115 20 0043909 127,00 30 0043924 143,00 50 0043487 85 0043186 20 0043910 133,00 30 0043925 166,00 50 0043939 85 0043957 20 0043911 156,00 30 0043926 182,00 50 0041501 85 0043958 20 0043912 202,00 30 0043927 50 0043940 85 0041498 412,00 20 0043913 257,00 30 0043928 50 0043941 20 0043914 389,00 30 0043929 395,00 50 0043942 50 0043943 56 EUR 40 0043972 300,00 55 0043992 346,00 180,00 85 0044011 473,00 227,00 115 0044030 614,00 40 0043973 359,00 155,00 55 0043993 407,00 191,00 85 0044012 550,00 115 0044031 698,00 40 0043974 371,00 160,00 55 0043994 418,00 196,00 85 0044013 565,00 115 0044032 765,00 40 0043975 381,00 171,00 55 0043995 456,00 218,00 85 0044014 622,00 0041496 275,00 115 0044033 852,00 40 0043966 161,00 40 0043976 429,00 55 0043986 182,00 55 0043996 516,00 171,00 85 0044006 245,00 85 0044015 693,00 262,00 115 0044024 311,00 115 0044034 965,00 40 0043967 177,00 55 0043987 201,00 205,00 85 0044007 267,00 280,00 115 0044025 347,00 40 0043968 180,00 55 0043988 216,00 239,00 85 0044008 289,00 328,00 115 0044026 371,00 40 0043969 204,00 208,00 55 0043989 232,00 268,00 85 0044009 311,00 115 0044027 393,00 40 0043970 220,00 262,00 55 0043990 254,00 368,00 85 0052136 359,00 115 0044028 456,00 40 0043971 262,00 504,00 55 0043991 305,00 645,00 85 0044010 406,00 115 0044029 506,00 29 30 32 34 36 38 40 44 48 64 72 80 90 21 T2,5 Zähne- Scheibenzahl breite Zähne- Scheibenzahl breite Teeth- Width of number pulley Art.-Nr / No. XTeethEUR number 10 12 16 0099456 13,10 14 16 0058379 13,10 15 16 0051089 13,10 16 16 0058381 13,50 18 16 0058201 19 16 0058382 20 16 0053530 13,90 22 16 0058383 24 16 0058384 25 16 0058385 14,50 26 16 0058386 14,80 28 16 0058387 14,80 30 16 0058388 15,40 32 16 0058389 36 16 0058390 40 16 0058391 16,10 44 16 0058392 16,80 48 16 0057301 17,10 60 16 0058393 18,60 Zähne- Scheibenzahl breite Width of pulley Art.-Nr / No. EUR 21 0051745 14,80 27 0049054 15,80 36 0058404 21,50 21 0048346 15,40 13,50 27 0091207 13,90 36 0058405 21 0091122 15,80 13,90 27 0058394 14,50 36 0058406 21 0091243 16,10 27 0051701 17,10 12 14 15 Teeth- Width of number pulley Art.-Nr / No. 28 EUR 21 0052384 22,40 27 0058400 25,00 36 0058415 28,40 21 0052385 20,80 16,10 27 0048779 25,60 21,80 36 0058416 28,80 21 0091166 24,70 15,50 27 0051906 27,00 21,80 36 0058417 31,10 21 0048345 26,00 27 0058401 28,80 36 0058418 32,50 21 0051985 28,80 30 32 36 36 0058407 22,40 21 0091167 17,10 15,40 27 0058395 17,00 27 0049326 32,50 15,80 36 0058408 22,70 36 0058419 35,20 21 0048575 19,50 21 0051237 29,10 27 0058396 20,40 27 0058402 32,90 36 0058409 23,40 21 0052382 20,00 27 0058397 21,00 36 0058410 23,70 21 0051374 20,40 27 0049294 36 0052492 21 0052100 21,00 27 0056029 22,40 36 0058411 25,60 21 0049618 21,50 27 0091062 22,70 36 0058412 26,00 21 0091071 21,80 27 0045559 23,40 36 0052229 27,00 21 0052383 21,80 27 0058398 23,70 36 0058413 27,40 21 0051337 22,40 27 0058399 24,70 36 0058414 27,90 16 18 19 20 22 24 25 26 27 22 T5 T5 40 42 36 0058420 35,90 21 0052386 29,60 27 0058403 33,80 36 0058421 37,50 21 0049064 33,50 21,80 27 0051104 34,50 24,30 36 0058422 40,40 21 0051338 38,00 27 0052139 40,80 36 0052493 49,20 44 48 60 T10 T10 Zähne- Scheibenzahl breite Teeth- Width of number pulley Art.-Nr / No. 12 EUR AT5 Zähne- Scheibenzahl breite Zähne- Scheibenzahl breite Teeth- Width of number pulley Art.-Nr / No. Teeth- Width of number pulley Art.-Nr / No. 28 EUR 31 0049726 21,80 31 0055598 44,60 40 0044856 24,30 40 0044786 51,00 31 0058423 23,40 47 0052023 59,80 40 0051310 27,40 66 0058436 70,60 31 0057278 24,30 31 0051278 40 0091505 28,80 40 0048274 16 31 0091110 26,50 47 0056009 63,20 40 0052323 31,10 66 0058437 18 31 0049563 27,90 31 0049763 40 0048647 33,50 40 0051211 64,50 47 0056003 38,00 47 0056010 72,00 66 0051946 86,30 31 0058424 64,50 14 15 19 20 22 24 25 26 27 30 32 12 EUR 21 0058442 18,60 27 0058462 20,00 36 0058480 26,00 21 0058443 19,50 48,30 27 0058463 20,40 56,20 36 0058481 26,00 21 0058444 20,00 77,80 27 0058464 21,00 56,70 36 0058482 26,50 21 0058445 21,00 27 0058465 22,40 36 0058483 27,00 21 0058446 23,40 14 15 16 66 0058428 44,20 31 0055597 29,60 40 0052324 35,20 40 0051990 75,20 27 0058466 24,30 47 0056004 40,80 47 0052473 85,40 36 0058484 27,90 66 0058429 47,40 66 0058438 110,00 21 0058447 23,70 31 0051298 31,50 31 0091321 81,30 27 0058467 25,00 40 0047093 37,20 40 0041912 94,60 36 0058485 28,40 47 0056005 44,20 47 0056011 107,00 21 0058448 24,30 66 0058430 50,30 66 0058439 123,00 27 0058468 26,00 31 0048309 32,90 31 0058425 87,40 36 0058486 28,80 40 0051210 39,10 40 0052328 101,00 21 0058449 25,00 47 0056006 47,90 47 0056012 118,00 27 0051002 26,50 66 0058431 55,70 66 0058440 143,00 36 0058487 31,10 31 0049727 37,20 31 0058426 97,00 21 0058450 25,60 40 0049111 42,70 40 0052329 113,00 27 0058469 27,00 47 0056007 49,80 47 0056013 131,00 36 0058488 31,50 66 0058432 61,40 66 0052452 158,00 21 0058451 26,00 31 0055596 38,50 31 0058427 137,00 27 0058470 27,90 40 0052325 45,00 40 0052330 147,00 36 0056283 32,50 47 0052094 52,90 47 0056014 171,00 21 0058452 26,00 66 0058441 225,00 27 0051077 28,40 36 0058489 32,90 21 0058453 26,30 27 0058471 29,10 36 0058490 33,80 21 0058454 26,60 36 40 44 48 60 18 19 20 22 24 25 26 66 0058433 63,60 31 0091053 40,40 40 0052326 47,40 47 0051729 57,50 66 0058434 66,00 31 0091322 42,70 40 0052101 49,20 27 0058472 29,60 47 0056008 58,60 36 0058491 34,50 66 0099457 68,60 27 28 23 Zähne- Scheibenzahl breite Zähne- Scheibenzahl breite Teeth- Width of number pulley Art.-Nr / No. 30 32 36 40 42 44 48 60 XTeethEUR number 15 21 0052545 27,00 27 0058473 28,60 16 Zähne- Scheibenzahl breite Width of pulley Art.-Nr / No. EUR Teeth- Width of number pulley Art.-Nr / No. 28 EUR 31 0058500 28,80 31 0058510 52,90 40 0058518 34,80 40 0058528 61,40 31 0058501 32,10 47 0058541 72,00 40 0058519 37,20 66 0058552 84,40 36 0058492 34,80 21 0058455 29,10 27 0058474 32,50 31 0058502 33,80 31 0058511 57,90 36 0058493 37,20 40 0058520 39,90 40 0058529 67,40 21 0058456 31,50 47 0058536 45,90 47 0058542 75,60 27 0058475 34,80 66 0051011 52,60 66 0058553 93,60 36 0058494 38,50 31 0058503 35,80 31 0058512 67,80 21 0058457 34,80 40 0058521 42,70 40 0058530 77,50 27 0058476 38,50 47 0058537 49,20 47 0054575 86,30 36 0058495 42,70 66 0058554 104,00 21 0058458 33,90 31 0058513 77,50 27 0058477 36 0058496 21 0058459 35,80 27 0058478 40,40 36 0058497 21 27 18 19 30 32 66 0058546 57,20 31 0058504 37,50 38,50 40 0058522 44,60 40 0058531 90,10 43,20 47 0052311 52,60 47 0056054 102,00 66 0052310 60,30 66 0058555 132,00 31 0058505 39,50 31 0058514 97,40 45,60 40 0058523 46,90 40 0058532 113,00 0058460 39,90 47 0054574 57,50 47 0058543 129,00 0058479 40,80 66 0058547 66,90 66 0058556 148,00 36 0058498 48,70 31 0058506 44,60 31 0058515 105,00 21 0058461 45,90 40 0058524 51,00 40 0058533 121,00 27 0051078 49,20 47 0056056 59,80 47 0058544 141,00 36 0058499 59,00 66 0058548 73,30 66 0058557 172,00 31 0058507 46,40 31 0058516 117,00 40 0058525 53,80 40 0058534 136,00 47 0058538 63,60 47 0056055 156,00 66 0058549 76,10 66 0058558 191,00 31 0058508 48,70 31 0058517 166,00 40 0058526 57,20 40 0058535 178,00 47 0058539 69,10 47 0058545 205,00 66 0058550 79,40 66 0058559 268,00 31 0058509 51,00 40 0058527 59,00 47 0058540 70,20 66 0058551 82,10 20 22 24 25 26 27 24 AT10 AT10 AT5 36 40 44 48 60 D Anschraubnaben GB Bold-on Hubs Buchsen Nr. Bohrung d von bis Bush No. Hole d from to mm Anschraubnabe Bauart SM Bold-on Hub Type SM Größe / size Art.-Nr./No. EUR Anschraubnabe Bauart BF Bold-on Hub Type BF Größe / size Art.-Nr./No. Anschraubnabe aus Stahl Bold-on Hub Steel EUR Größe / size Art.-Nr./No. EUR 1210 11-32 SM 12 0448692 81,20 BF 12 0173949 37,30 SM 125 0173942 422,00 1610 14-42 SM 16-1 0170645 95,10 BF 16 0173950 41,10 SM 16-1S 0173943 497,00 1615 14-42 SM 16-2 0448693 95,10 SM 16-2S 0173944 504,00 2012 14-50 SM 20 0448694 149,00 BF 20 0173951 57,90 2517 16-65 SM 20S 0173945 561,00 2517 16-65 SM 25 0448695 225,00 BF 25 0173952 92,40 SM25S 0173946 656,00 3020 25-75 SM 30-1 0448696 383,00 BF 30 0173953 131,00 3020 25-75 SM 30-2 0448697 467,00 3030 35-75 SM 30-1S 0173947 1.204,00 3030 35-75 SM 30-2S 0173948 1.343,00 D Einschweißnaben GB Weld-on Hubs Buchsen Nr. Bohrung d von bis Bush No. Hole d from to mm Einschweißnabe Bauart WM Weld-on Hub Type WM Größe / size Art.-Nr./No. Einschweißnabe Bauart WH Weld-on Hub Type WH EUR Größe / size Art.-Nr./No. EUR 1210 11-32 WM 12 0448600 78,80 WH 12 0173966 67,20 1610 14-42 WM 16-1 0092293 92,40 WH 16 0049377 81,40 1615 14-42 WM 16-2 0448601 95,10 2012 14-50 WM 20 0092294 103,00 WH 20 0093015 97,50 2517 16-65 WM 25 0448602 136,00 WH 25 0047965 116,00 3020 25-75 WM 30-2 0049916 197,00 WH 30 0173968 175,00 3030 35-75 WM 30-3 0448603 204,00 3525 35-100 WH 35 0093016 346,00 479,00 3535 35-90 WM 35 0448604 400,00 4040 40-100 WM 40 0448605 547,00 WH 40 0093017 4545 55-110 WM 45 0448606 794,00 WH 45 0093018 672,00 5050 70-125 WM 50 0448607 1.396,00 WH 50 0093019 1.190,00 25 D DESCH Pex-Kupplungen GB DESCH Pex Couplings Typ A Größe Typ B Nabe un-/vorgebohrt Nabe fertiggebohrt Elastomerpakete Hub unbored/pre-bored Hub finished bore Elastomer buffer Teil 1 Teil 1 Size inkl. Paket 80 Shore Part 1 Teil 2+3 Part 2+3 Teil 4 Part 4 Teil 4 Part 4 Satz / Set 80° Shore Stück per Satz Units per set 4 Art.-Nr./No. 0180000 0180024 0180001 0180025 0180064 EUR 25,10 23,10 40,70 38,70 7,40 Art.-Nr./No. 0180002 0180026 0180003 0180027 0180065 EUR 27,30 25,10 42,90 40,70 9,30 Art.-Nr./No. 0180004 0180028 0180005 0180029 0180066 EUR 31,30 28,90 46,90 44,50 12,70 Art.-Nr./No. 0180006 0180030 0180007 0180031 0180067 EUR 39,40 36,40 57,60 54,70 14,20 Art.-Nr./No. 0180008 0180048 0180032 0180009 0180049 0180033 0180068 EUR 62,90 77,80 58,10 83,80 98,60 79,00 14,80 Art.-Nr./No. 0180010 0180050 0180034 0180011 0180051 0180035 0180069 EUR 86,50 110,00 79,90 110,00 133,00 103,00 16,40 140 Art.-Nr./No. 0180012 0180052 0180036 0180013 0180053 0180037 0180070 EUR 116,00 144,00 106,00 145,00 173,00 135,00 21,60 160 Art.-Nr./No. 0180014 0180054 0180038 0180015 0180055 0180039 0180071 EUR 154,00 206,00 142,00 190,00 242,00 178,00 29,50 180 Art.-Nr./No. 0180016 0180056 0180040 0180017 0180057 0180041 0180072 EUR 194,00 247,00 179,00 236,00 288,00 220,00 37,70 200 Art.-Nr./No. 0180018 0180058 0180042 0180019 0180059 0180043 0180073 EUR 251,00 321,00 231,00 303,00 373,00 284,00 41,70 225 Art.-Nr./No. 0180020 0180060 0180044 0180021 0180061 0180045 0180074 EUR 298,00 472,00 275,00 360,00 535,00 337,00 60,00 250 Art.-Nr./No. 0180022 0180062 0180046 0180023 0180063 0180047 0180075 EUR 368,00 562,00 339,00 440,00 634,00 411,00 78,90 68 80 95 110 125 26 Part 1 Teil 2+3 Part 2+3 incl. buffer 80 Shore incl. buffer 80 Shore 58 inkl. Paket 80 Shore 5 6 6 6 6 6 7 8 8 8 8 D DESCH HRC-Kupplungen GB DESCH HRC Couplings Größe F B-Flansch vorgebohrt B-Flansch fertiggebohrt F-Flansch H-Flansch Stern Naturkautschuk 80° Shore F-Flange H-Flange Star natural rubber 80° Shore B-Flange B-Flange finished bored Art.-Nr./No. 0174200 0174201 0174202 0174203 0174264 EUR 44,00 112,00 44,00 44,00 20,60 1008 1008 Art.-Nr./No. 0174204 0174205 0174206 0174207 0174266 EUR 48,20 116,00 48,20 48,20 28,80 1108 1108 Buchse*/Bush* 90 Buchse*/Bush* 110 Art.-Nr./No. 0174208 0174209 0174210 0174211 0174268 EUR 58,90 118,00 58,090 58,90 32,80 1610 1610 Buchse*/Bush* 130 Art.-Nr./No. 0174212 0174213 0174214 0174215 0174270 EUR 73,70 133,00 73,70 73,70 44,300 1610 1610 Art.-Nr./No. 0174216 0174217 0174218 0174219 0174272 EUR 83,80 135,00 83,80 83,80 68,40 2012 2012 Buchse*/Bush* 150 Buchse*/Bush* 180 Art.-Nr./No. 0174220 0174221 0174222 0174223 0174274 EUR 127,00 178,00 127,00 127,00 123,00 2517 2517 Art.-Nr./No. 0174224 0174225 0174226 0174227 0174276 EUR 274,00 357,00 274,00 274,00 144,00 3020 3020 Art.-Nr./No. 0174228 0174229 0174230 0174231 0174278 EUR 463,00 556,00 463,00 463,00 187,00 3525 3020 Buchse*/Bush* 230 Buchse*/Bush* 280 H pre-bored Size 70 B Buchse*/Bush* > * Preise Seite 42 / * Prices page 42 Ausführungen gem. ATEX siehe Klappleiste / Design to ATEX see folded strip 27 D DESCH Flex-Kupplungen GB DESCH Flex Couplings B F H B D40-D60 B-Flansch H D70-D250 Reifen Reifen Größe vorgebohrt B-Flansch fertiggebohrt Size B-Flange B-Flange pre-bored finished bored Art.-Nr./No. 0174000 0174001 0174002 0174003 0174120 0174121 EUR 56,40 169,00 56,40 56,40 28,50 34,90 1008 1008 D 40 Buchse*/Bush*/ D 50 Tyres neoprene FRAS/ 0174005 0174006 0174007 0174123 0174124 193,00 77,70 77,70 33,80 44,90 1210 1210 Art.-Nr./No. 0174008 0174009 0174010 0174011 0174126 0174127 EUR 101,00 228,00 101,00 101,00 47,50 67,60 1610 1610 Art.-Nr./No. 0174012 0174013 0174014 0174015 0174129 0174130 EUR 126,00 251,00 126,00 126,00 62,30 90,30 2012 1610 Art.-Nr./No. 0174016 0174017 0174018 0174019 0174132 0174133 EUR 158,00 283,00 158,00 158,00 80,50 121,00 2517 2012 Art.-Nr./No. 0174020 0174021 0174022 0174023 0174135 0174136 EUR 195,00 311,00 195,00 195,00 99,40 136,00 2517 2517 Buchse*/Bush*/ D 100 Neopren FRAS/ Tyres natural rubber/ 77,70 Buchse*/Bush*/ D 90 Naturkautschuk/ H-Flange 0174004 Buchse*/Bush*/ D 80 H-Flansch F-Flange EUR Buchse*/Bush*/ D 70 F-Flansch Art.-Nr./No. Buchse*/Bush*/ D 60 Art.-Nr./No. 0174024 0174025 0174026 0174027 0174138 0174139 EUR 242,00 338,00 242,00 242,00 124,00 163,00 3020 2517 Buchse*/Bush*/ 28 F D DESCH Flex-Kupplungen GB DESCH Flex Couplings B F H B D40-D60 B-Flansch F H D70-D250 Reifen Reifen Größe vorgebohrt B-Flansch fertiggebohrt Size B-Flange B-Flange pre-bored finished bored Art.-Nr./No. 0174028 0174029 0174030 0174031 0174141 0174142 EUR 292,00 379,00 292,00 292,00 151,00 198,00 3020 3020 D 110 Buchse*/Bush* D 120 0174033 0174034 0174035 0174144 0174145 496,00 396,00 396,00 204,00 260,00 3525 3020 Art.-Nr./No. 0174036 0174037 0174038 0174039 0174147 0174148 EUR 558,00 669,00 558,00 731,00 274,00 337,00 3525 3525 Art.-Nr./No. 0174040 0174041 0174042 0174043 0174150 0174151 EUR 766,00 904,00 766,00 766,00 324,00 435,00 4030 4030 Art.-Nr./No. 0174044 0174045 0174046 0174047 0174153 0174154 EUR 1.415,00 1.641,00 1.415,00 1.415,00 419,00 511,00 4535 4535 Art.-Nr./No. 0174048 0174049 0174050 0174051 0174156 0174157 EUR 1.835,00 2.092,00 1.835,00 1.835,00 535,00 686,00 4535 4535 Buchse*/Bush* D 220 Art.-Nr./No. 0174052 0174053 0174054 0174055 0174159 0174160 EUR 2.243,00 2.512,00 2.243,00 2.243,00 739,00 943,00 5040 5040 Art.-Nr./No. 0174056 0174057 0174162 0174163 EUR 3.183,00 3.501,00 967,00 1210,00 Buchse*/Bush* D 250 Tyres neoprene FRAS/ 396,00 Buchse*/Bush* D 200 Neopren FRAS/ Tyres natural rubber/ 0174032 Buchse*/Bush* D 180 Naturkautschuk/ H-Flange EUR Buchse*/Bush* D 160 H-Flansch F-Flange Art.-Nr./No. Buchse*/Bush* D 140 F-Flansch 29 D Hadeflex®-Kupplungen Bauart F GB Hadeflex® Couplings type F Taschenteil Female part Klauenteil Male part Größe Size FW 2-teilig 2 part FNW 3-teilig 3 part ungebohrt bzw. vorgebohrt unbored / pre-bored 1 2 3 4 5 6 7 8 9 9a 10 10a 11 12 6 7 8 9 9a 10 10a 11 12 fertiggebohrt finished bored Ersatzpakete / Replacement elements un-/vorgebohrt mit Perbunanpaket fertiggebohrt mit Perbunanpaket un-/ pre-bored with Perbunanpaket finished bored with Perbunanpaket Stück je Kupplung Abmessung units per dimensions coupling Art.-Nr./No. EUR Art.-Nr./No. EUR Art.-Nr./No. EUR Art.-Nr./No. EUR 0117185 0117188 0117191 0117194 0117197 0117200 0117203 0117206 0117209 0117212 0117215 43,30 48,20 51,90 66,00 78,00 93,90 121,00 164,00 280,00 472,00 581,00 0303350 0303351 0303352 0303353 0303354 0303355 0303356 0303357 0303358 0303359 0303360 154,00 159,00 162,00 176,00 188,00 203,00 240,00 281,00 399,00 615,00 766,00 0303006 0303021 0303036 0303051 0303066 0303081 0303096 0303111 0303126 0303141 0303156 57,10 73,80 84,80 96,60 116,00 154,00 196,00 259,00 377,00 598,00 682,00 0303008 0303023 0303038 0303053 0303068 0303083 0303098 0303113 0303128 0303143 0303158 167,00 186,00 194,00 208,00 224,00 262,00 311,00 373,00 496,00 742,00 868,00 154,00 196,00 259,00 377,00 0303083 0303098 0303113 0303128 262,00 311,00 373,00 496,00 Auf Anfrage / on demand 0303270 0303273 0303276 0303279 259,00 306,00 403,00 558,00 0303272 0303275 0303278 0303281 355,00 411,00 520,00 680,00 0303081 0303096 0303111 0303126 Auf Anfrage / on demand 3 4 5 5 6 6 7 7 8 8 8 10 10 8 6 7 7 8 8 8 10 10 8 mm Art.-Nr./No. EUR 20 x 20 x 10 20 x 20 x 10 20 x 20 x 10 20 x 20 x 10 25 x 20 x 12 36 x 25 x 15 36 x 25 x 15 45 x 30 x 20 45 x 30 x 20 60 x 40 x 25 60 x 40 x 25 60 x 40 x 25 60 x 40 x 25 80 x 60 x 30 36 x 25 x 15 36 x 25 x 15 45 x 30 x 20 45 x 30 x 20 60 x 40 x 25 60 x 40 x 25 60 x 40 x 25 60 x 40 x 25 80 x 60 x 30 0108133 0108133 0108133 0108133 0108141 0108149 0108149 0108157 0108157 0108165 0108165 0108165 0108165 0108173 0108149 0108149 0108157 0108157 0108165 0108165 0108165 0108165 0108173 3,00 3,00 3,00 3,00 3,80 6,40 6,40 10,10 10,10 18,50 18,50 18,50 18,50 30,80 6,40 6,40 10,10 10,10 18,50 18,50 18,50 18,50 30,80 D Hadeflex®-Kupplungen Bauart TX für Taper -Spannbuchsen GB Hadeflex® Couplings type TX for taper bush Größe Buchsen Nr. Bush No. Size TX 03 28 42 60 75 90 110 1108 1610 2517 3020 3535 4545 Stern aus PUR Star in PUR Kupplungshälfte ohne Buchse Coupling half without bush Art. Nr. 0126723 0126724 0126725 0126726 0126727 0126728 EUR 48,70 67,00 109,00 168,00 240,00 440,00 Perbunan 92° Shore 0126717 0126718 0126719 0126720 0126721 0126722 98° Shore 0129422 0129423 0129424 0129425 0129426 0129427 EUR 14,30 25,00 63,30 80,20 214,00 338,00 > * Preise Seite 42 / * Prices page 42 Ausführungen gem. ATEX siehe Klappleiste / Design to ATEX see folded strip 30 D Hadeflex®-Kupplungen Bauart XW GB Hadeflex® Couplings type XW Kupplungshälfte un-/ vorgebohrt Größe Coupling half un-/ pre-bored Size XW 1 24* 28* 32 38 42 48 55 60 65 75 85 100 110 125 140 160 Kupplungshälfte fertiggebohrt H7 Nut und Stellschraube Ersatzstern aus PUR Spare star in PUR Coupling half finished bore H7 keyway and setting screw Art.-Nr./No. EUR Art.-Nr./No. EUR 92° Shore 98° Shore EUR 0128579 0128581 0121743 0121745 0121747 0121749 0121751 0121753 0121755 0121757 0121759 0121761 0121763 0121765 0121767 0121769 23,80 25,70 30,90 40,50 50,80 54,60 73,80 89,50 110,00 147,00 157,00 292,00 396,00 475,00 802,00 1.053,00 0306534 0306535 0306502 0306503 0306504 0306505 0306506 0306507 0306508 0306509 0306510 0306511 0306512 0306513 0306514 0306515 98,20 104,00 117,00 130,00 139,00 145,00 172,00 191,00 214,00 259,00 290,00 418,00 541,00 634,00 997,00 1.292,00 0121627 0121631 0121635 0121639 0121643 0121647 0121651 0121655 0121659 0121663 0121667 0121671 0121675 0121679 0121683 0121687 0129406 0129407 0129408 0129409 0129410 0129411 0129412 0129413 0129414 0129415 0129416 0129417 0129418 0129419 0129420 0129421 8,80 9,60 12,00 13,80 18,50 29,10 39,80 52,80 62,80 64,80 139,00 194,00 268,00 369,00 434,00 742,00 > * aus Aluminium/ * made of aluminium D Orpex ®-Kupplungen Bauart WN GB Orpex® Couplings type WN Größe Size 105* 125* 144 162 178 198 228 252 285 320 360 Nabe Lochteil Nabe Bolzenteil Hub with holes Hub with bolts ungebohrt bzw. vorgebohrt unbored / pre-bored Art.-Nr./No. 0128583 0128586 0122211 0122220 0122229 0122238 0122247 0122256 0122265 0122274 0122283 EUR 116,00 160,00 185,00 265,00 326,00 375,00 549,00 677,00 873,00 1.089,00 1.405,00 fertiggebohrt mit Stellschraube finished bore with setting screw Art.-Nr./No. 0128585 0128588 0122213 0122222 0122231 0122240 0122249 0122258 0122267 0122276 0122285 EUR 193,00 238,00 267,00 348,00 412,00 466,00 645,00 785,00 989,00 1.247,00 1.592,00 ungebohrt bzw. vorgebohrt unbored / pre-bored Art.-Nr./No. 0322618 0322621 0305536 0305545 0305554 0305563 0305572 0305581 0305590 0305599 0305608 EUR 187,00 242,00 278,00 398,00 488,00 565,00 824,00 1.018,00 1.307,00 1.634,00 2.106,00 Ersatzpuffer / Replacement elements fertiggebohrt mit Stellschraube finished bore with setting screw Art.-Nr./No. 0322620 0322623 0305538 0305547 0305556 0305565 0305574 0305583 0305592 0305601 0305610 EUR 311,00 360,00 401,00 523,00 617,00 702,00 968,00 1.180,00 1.481,00 1.870,00 2.387,00 Stück je Kupplung units per coupling 8 8 10 9 10 12 11 12 11 12 10 Abmessung dimensions D x d x lg 20 x 8 x 19 24 x 10 x 22 24 x 10 x 22 30 x 12 x 27 30 x 12 x 27 30 x 12 x 27 40 x 16 x 33 40 x 16 x 33 48 x 20 x 41 48 x 20 x 41 64 x 25 x 51 Perbunan Art.-Nr./No. 0122319 0122320 0122320 0122321 0122321 0122321 0122322 0122322 0122323 0122323 0122324 EUR 7,40 9,50 9,50 13,40 13,40 13,40 20,20 20,20 32,50 32,50 50,00 > * Größe 105 und 125 aus Sphäroguss / * Size 105 and 125 spheroidal graphite iron 31 D Habix®-Kupplungen GB Habix® Couplings T2 T1 Nabe un-/vorgebohrt Werkstoff Größe Material Size 19 Hub unbored/pre-bored Art.-Nr./No. EUR Buchse*/Bush* 24 Art.-Nr./No. EUR Buchse*/Bush* 28 Art.-Nr./No. EUR Buchse*/Bush* 38 Art.-Nr./No. EUR Buchse*/Bush* 42 Art.-Nr./No. EUR Grauguss Buchse*/Bush* 48 Art.-Nr./No. cast iron EUR Buchse*/Bush* 55 Art.-Nr./No. EUR Buchse*/Bush* 65 Art.-Nr./No. EUR Buchse*/Bush* 75 Art.-Nr./No. EUR Buchse*/Bush* 90 Art.-Nr./No. EUR Buchse*/Bush* > * Preise Seite 42 / * Prices page 42 T1 T2 T1 T2 0135982 7,60 0136002 8,70 53,50 54,70 0135984 10,50 0136004 11,50 58,50 69,30 0135986 14,40 0136006 17,00 65,30 67,90 0135988 41,20 0136008 49,90 99,70 108,00 0135990 57,20 0136010 65,80 117,00 125,00 0135992 67,50 0136012 79,70 136,00 146,00 0135994 89,90 0136014 104,00 158,00 172,00 0135996 118,00 0136016 137,00 187,00 207,00 0135998 169,00 0136018 199,00 244,00 273,00 0136000 252,00 0136024 293,00 327,00 371,00 Habix®-Plus-Kupplungen GB Habix®-Plus Couplings Werkstoff Größe Material Size 24 Aluminium 28 38 48 65 Art.-Nr./No. EUR Art.-Nr./No. EUR Art.-Nr./No. EUR Art.-Nr./No. EUR Art.-Nr./No. EUR Art.-Nr./No. EUR T4 Kupplungsstern Nabe mit TB-Bohrung Hub with TB hole Coupling star T5 T3 T4 0135956 19,60 1008 0135957 21,40 1108 0135958 38,40 1108 0135959 49,60 1610 0135960 59,90 1615 0135961 81,40 2012 0135962 98,50 2012 0135963 124,00 2517 0135964 307,00 3020 0135965 19,60 1008 0135966 21,40 1108 0135967 38,40 1108 0135968 49,60 1610 0135969 59,90 1615 0135970 81,40 2012 0135971 107,00 2012 0135972 164,00 3020 0135973 338,00 3535 92° Shore 0135884 4,60 98° Shore 0135945 4,60 0135885 5,40 0135946 5,40 0135886 6,90 0135947 6,90 0135887 11,70 0135948 11,70 0135888 17,60 0135949 17,60 0135889 20,60 0135950 20,60 0135890 26,40 0135951 26,40 0135891 43,90 0135952 43,90 0135892 64,50 0135953 64,50 0135893 100,00 0135954 100,00 Ausführungen gem. ATEX siehe Klappleiste / Design to ATEX see folded strip D 19 32 Nabe fertiggebohrt Hub finished bore T3 T5 Kupplungshälfte vor-/fertiggebohrt Kupplungsstern Coupling half unbored/pre-bored Coupling star HPN HPK 0186000 26,00 0186001 33,00 0186002 44,00 0186003 81,00 0186004 130,00 0186005 324,00 0186006 42,00 0186007 50,00 0186008 67,00 0186009 139,00 0186010 227,00 0186011 412,00 98° Shore A 0186012 6,80 0186013 7,60 0186014 8,40 0186015 10,70 0186016 19,50 0186017 78,00 64° Shore D 0186018 6,80 0186019 7,60 0186020 8,40 0186021 10,70 0186022 19,50 0186023 78,00 D Ferroflex®N-Kupplungen GB Ferroflex®N Couplings FEN Größe Size vorgebohrt pre-bored FEN1 fertiggebohrt finished bored vorgebohrt pre-bored FEN2 fertiggebohrt finished bored vorgebohrt pre-bored fertiggebohrt finished bored Art.-Nr./No EUR Art.-Nr./No EUR Art.-Nr./No EUR Art.-Nr./No EUR Art.-Nr./No EUR Art.-Nr./No EUR 48 0186100 152,00 0186106 246,00 0186112 325,00 0186118 419,00 0186124 325,00 0186130 419,00 58 0186101 209,00 0186107 349,00 0186113 431,00 0186119 571,00 0186125 441,00 0186131 581,00 64 0186102 268,00 0186108 408,00 0186114 590,00 0186120 730,00 0186126 593,00 0186132 733,00 90 0186103 546,00 0186109 784,00 0186115 1.141,00 0186121 1.379,00 0186127 1.161,00 0186133 1.399,00 102 0186104 729,00 0186110 1.013,00 0186116 1.514,00 0186122 1.798,00 0186128 1.547,00 0186134 1.831,00 140 0186105 1.125,00 0186111 1.453,00 0186117 2.367,00 0186123 2.695,00 0186129 2.367,00 0186135 2.695,00 Größe Size Federpaket Disc pack boltings Art.-Nr./No. EUR 48 0186136 58,00 58 0186137 70,00 64 0186138 82,00 90 0186139 102,00 102 0186140 134,00 140 0186141 170,00 33 D DESCH Zahnkupplungen GB DESCH Gear couplings vorgebohrt Größe fertiggebohrt pre-bored Size GC - 50 GC - 65 GC - 75 GC - 100 GC - 120 GC - 135 GC - 150 GC - 165 GC - 190 finished bored Art.-Nr./No. EUR Art.-Nr./No. EUR 082450 082452 082454 082456 082458 082460 082462 082464 082466 367,00 444,00 540,00 678,00 960,00 1.113,00 1.525,00 1.972,00 2.652,00 082451 082453 082455 082457 082459 082461 082463 082465 082467 446,00 544,00 662,00 896,00 1.221,00 1.419,00 1.918,00 2.408,00 3.219,00 > Weitere Größen auf Anfrage > Further sizes on request D DESCH Mini-Kupplungen GB DESCH Mini couplings MWK MWK Typ Type MWK vorgebohrt pre-bored MWK fertig gebohrt H7 ohne Nut finished bore H7 without keyway Größe Size 18 20 22 25 30 40 50 60 70 80 18 20 22 25 30 40 50 60 70 80 MWH Aluminium Art.-Nr./No. EUR 0179402 0179403 0179404 0179405 0179406 0179407 0179408 0179409 0179410 0179411 0179424 0179425 0179426 0179427 0179428 0179429 0179430 0179431 0179432 0179433 32,00 47,00 47,00 52,70 65,90 86,60 113,00 207,00 245,00 286,00 37,60 56,50 56,50 62,70 79,00 105,00 136,00 248,00 293,00 344,00 Edelstahl / Stainless St. Art.-Nr./No. EUR 0179413 0179414 0179415 0179416 0179417 0179418 0179419 0179435 0179436 0179437 0179438 0179439 0179440 0179441 Stahl / Steel Art.-Nr./No. EUR 45,20 79,00 82,80 90,30 113,00 143,00 181,00 0179420 0179421 0179422 245,00 323,00 396,00 0179442 0179443 0179444 293,00 389,00 474,00 53,90 95,30 99,10 108,00 136,00 170,00 216,00 MWH 34 Typ Type Größe Size MWH fertig gebohrt H7 ohne Nut finished bore H7 without keyway 30 40 50 60 70 80 Aluminium Art.-Nr./No. EUR 0179446 0179447 0179448 0179449 0179450 0179451 86,60 132,00 174,00 323,00 354,00 384,00 Edelstahl / Stainless St. Art.-Nr./No. EUR 0179453 0179454 0179455 Stahl / Steel Art.-Nr./No. EUR 121,00 169,00 245,00 0179456 0179457 0179458 399,00 414,00 603,00 D Schalenkupplungen DIN 115 GB Clamp Couplings DIN 115 Gusseisen Form A mit Nut Cast iron form A with keyway Bohrung/ Hole Ø / dia. d1 20 25 30 35 40 45 50 55 Art.-Nr/No. 0400002 0400010 0400018 0400026 0400034 0400042 0400050 0400056 Gusseisen Form A mit Nut Cast iron form A with keyway Bohrung/ Hole EUR 131,00 139,00 139,00 165,00 165,00 213,00 213,00 262,00 Ø / dia. d1 60 65 70 75* 80 90 100 110 Art.-Nr/No. 0400060 0400064 0400068 0400072 0400076 0400084 0400092 0400096 EUR 262,00 301,00 301,00 506,00 506,00 767,00 1.077,00 1.554,00 > * Nicht in DIN 115 enthalten. Bohrungstoleranzfeld: d1 20 bis 50: V7; d1 55 bis 125: U7. > * not included in DIN 115. Hole tolerance zone: d1 20 to 50: V7; d1 55 to 125: U7 D Starre Kupplungen Stahl / Edelstahl GB Clamp Couplings Steel / Stainless Steel Größe Size Starre Kupplung geschlitzt (Ohne Nut) Clamp coupling 1-piece design (Without keyway) Bohrung Bore D1 10 12 14 15 16 19 20 25 30 Stahl Steel Art.-Nr./No. 0181258 0181259 0181260 0181261 0181262 0179792 0174982 0181263 0181264 Starre Kupplung geteilt (Ohne Nut) Clamp coupling 2-piece design (Without keyway) Edelstahl Stainless Steel EUR 31,10 31,10 38,60 38,60 38,60 42,50 42,50 51,40 61,50 Art.-Nr./No. 0181265 0181266 0181267 0181268 0181269 0181270 0181271 0181272 0181273 EUR 41,90 41,90 51,40 51,40 51,40 64,80 64,80 76,90 94,90 Stahl Steel Art.-Nr./No. 0181274 0181275 0181276 0176764 0174959 0181277 0181278 0177660 0181279 Edelstahl Stainless Steel EUR 55,00 55,00 62,20 62,20 62,20 73,30 73,30 80,80 111,00 Art.-Nr./No. 0181280 0181281 0181282 0181283 0181284 0181285 0181286 0181287 0181288 EUR 80,20 80,20 102,00 102,00 102,00 141,00 141,00 151,00 220,00 > Auf Anfrage: Andere Abmessungen, Ausführung mit Passfedernut nach DIN 6885 > On request: Other dimensions, design with keyway according to DIN 6885 D Scheibenkupplungen DIN 116 GB Flange Couplings DIN 116 Bohrung/ Hole d1 25 30 35 40 45 50 Gusseisen Form A Cast iron form A Art.-Nr/No. 0490874 0490875 0490876 0490877 0490878 0490879 EUR 340,00 340,00 377,00 377,00 427,00 427,00 Bohrung/ Hole d1 55 60 70 80 90 100 Gusseisen Form A Cast iron form A Art.-Nr/No. 0490880 0490881 0490882 0490883 0490884 0490885 EUR 519,00 519,00 745,00 1.040,00 1.294,00 1.556,00 Kurzfristig lieferbar/ Can be supplied at short term 35 D Motorspannschienen DIN 42 923 für elektrische Maschinen GB Motor Slide Rails DIN 42 923 for electrical machines Gleitlänge l1 Sliding length l1 265 315 355 400 500 630 800 1000 1250 Art.-Nr. / No 0455150 0455152 0455154 0455156 0455158 0455160 0455162 0455164 0455551 EUR 52,60 58,50 64,30 79,70 146,00 247,00 341,00 637,00 1.542,00 D Motorspannschienen leichte Ausführung GB 36 Motor Slide Rails lightweight design Ausführung Nennlänge Design Nominal length A Preis Stck. Unit price Ausführung Nennlänge Design Nominal length Preis Stck. Unit price 250 Art.-Nr. / No. 0455166 EUR 45,40 A 330 0455168 51,00 A 400 0455170 69,80 B 1200 0455198 912,00 A 450 0455172 79,70 B 1300 0455200 1.161,00 A 500 0455174 89,90 B 1400* 0455202 2.540,00 A 550 0455176 125,00 B 1500* 0455204 2.711,00 Art.-Nr. / No. EUR B 1000 0455194 497,00 B 1100 0455196 821,00 A 600 0455178 146,00 C 1600* 0455206 3.790,00 A 650 0455180 159,00 C 1700* 0455208 3.977,00 B 700 0455182 216,00 C 1900* 0455210 4.690,00 B 800 0455186 260,00 C 2200* 0455212 4.985,00 B 900 0455190 393,00 > *nicht bevorratet / *no stocked item D Motorspannschienen aus Stahl GB Motor Slide Rails Steel Typ / Type Gleitlänge / Sliding length 312/6 312 Motor-Baugröße / Overall motor size Art.-Nr. / No. 63/71 0094433 240 Preis Stck. / Unit price EUR 22,50 312/8 312 240 80/90 0057307 26,00 375/6 375 305 63/71 0094434 24,70 375/8 375 305 80/90 0096630 28,90 375/10 375 305 100/112 0096631 29,20 395/8 395 302 80/90 0094435 32,60 395/10 395 302 100/112 0049385 40,50 495/8 495 405 80/90 0094436 36,70 495/10 495 405 100/112/132 0051269 44,10 495/12 495 405 160 0096632 46,50 530/10 530 413 132 0094437 55,50 530/12 530 413 160 0095651 59,90 630/10 630 515 132 0049506 55,50 630/12 630 515 160/180 0059885 65,70 686/12 686 538 160/180 0051657 77,60 686/16 686 538 200/225 0049643 95,20 864/16 864 700 200/225 0094208 157,00 864/20 864 700 250/280 0049570 199,00 1072/20 1072 865 250/280 0049794 264,00 1072/24 1072 865 315 0049567 316,00 1330/24 1330 1065 315/355 0096098 358,00 > Die Preise verstehen sich einschließlich Spann- und Motorbefestigungsschrauben. > The prices include clamping and motor fastening bolts. D Motorschlitten aus Stahl GB Motor Slides Steel Typ / Type Art.Nr. / No. EUR 210 0170676 70,30 270 0170677 77,00 340 0170678 112,00 430 0170679 117,00 490 0170680 219,00 37 D Gleitlager DIN 502, DIN 503 und DIN 504 GB Slide bearing DIN 502, DIN 503 and DIN 504 Augenlager / Eye-type bearing Wellen-Ø Shaft Ø DIN 504 B ohne Buchse1) without bush1) DIN 504 A mit Buchse1) with bush1) d1 Ersatzbuchsen Spare bushes mm Art.-Nr./No EUR Art.-Nr./No EUR Art.-Nr./No EUR 20 - - 0452241 76,60 - - 25 - - 0452244 92,20 0123607 57,30 30 0452184 230,00 0452247 92,20 0123608 57,30 35 - - 0452250 98,00 0123609 73,00 40 0452190 244,00 0452253 98,00 0123610 73,00 45 - - 0452256 131,00 0123611 110,00 50 0452196 287,00 0452259 131,00 0123612 110,00 55 - - 0452262 172,00 0123613 128,00 60 0452202 382,00 0452265 172,00 0123614 128,00 70 0452208 446,00 0452271 232,00 0123616 199,00 80 0452214 631,00 0452277 294,00 0123618 246,00 90 0452217 876,00 0452280 375,00 0123619 322,00 100 0452220 1.538,00 0452283 548,00 0123620 562,00 > 1) Rotguss-Buchse Rg7* / Red bronze bush Rg7* 38 Flanschlager / Flanged bearing DIN 502 A mit Buchse1) with bush1) DIN 502 B ohne Buchse1) without bush1) Auf Anfrage on demand DIN 503 A mit Buchse1) with bush1) D Deckellager DIN 505-L und DIN 506-A GB Cap Bearings DIN 505-L and DIN 506-A mit Lagerschalen aus Rotguss: Rg7* with bearing shells of red bronze: Rg7* Wellen-Ø Shaft Ø Deckellager / Cap Bearings Ersatzschalen / Spare shell Deckellager / Cap Bearings Ersatzschalen / Spare shell DIN 505 -L DIN 505 M DIN 506 A DIN 506 C d1 mm Art.-Nr./No EUR Art.-Nr./No. EUR Art.-Nr./No. EUR Art.-Nr./No. EUR 25 0453001 260,00 0322001 133,00 – – – – 30 0453004 260,00 0322006 133,00 – – – – 35 0453007 310,00 0322011 172,00 – – – – 40 0453010 310,00 0322016 172,00 – – – – 45 0453013 328,00 0322021 199,00 – – – – 50 0453016 328,00 0322026 199,00 – – – – 60 0453022 430,00 0322036 247,00 – – 0322216 418,00 70 0453028 544,00 0322046 355,00 – – 0322226 497,00 80 0453034 659,00 0322056 411,00 0453139 1.374,00 0322236 604,00 90 0453040 891,00 0322066 592,00 0453142 1.555,00 0322241 825,00 100 0453043 1.117,00 0322071 745,00 0453145 1.788,00 0322246 1.024,00 110 0453046 1.307,00 0322076 807,00 0453148 1.921,00 0322251 1.158,00 125 0453052 1.780,00 0322081 1.343,00 130 – – 0453154 2.501,00 0322261 1.432,00 0453157 2.501,00 0322266 1.432,00 140 0453058 2.116,00 0322096 1.530,00 0453160 3.158,00 0322271 1.823,00 150 0453061 2.332,00 0322101 1.742,00 0453163 3.230,00 0322276 1.891,00 160 – – 0453166 5.152,00 0322281 2.909,00 180 – – 0453169 5.422,00 0322286 3.176,00 > *das Kurzzeichen „Rg7“ ist lt. DIN 17 05 (Nov. 1981) durch das Kurzzeichen „G-CuSn 7ZnPb“ ersetzt worden. > *According to DIN 17 05 (Nov. 1981) the abbreviation „Rg7“ has been replaced by the abbreviation „G-CuSn 7ZnPb“. 39 D Planox®-Reibkupplungen GB Planox® Friction Clutches PM PMW PMF Standardausführung Grauguss/Standard design in grey cast iron Wellenkupplung / shaft coupling Größe Size vorgebohrt pre-bored Flanschkupplung / flange coupling fertiggebohrt u. genutet* finished bore and keyway* vorgebohrt pre-bored fertiggebohrt u. genutet* finished bore and keyway* Art.-Nr./No. EUR Art.-Nr./No. EUR* Art.-Nr./No. EUR Art.-Nr./No. EUR* 0408088 1.849,00 0408089 2.088,00 0408000 1.628,00 0408001 1.758,00 61 71 0408092 2.180,00 0408093 2.446,00 0408004 1.887,00 0408005 2.033,00 81 0408096 2.393,00 0408097 2.680,00 0408008 2.038,00 0408009 2.201,00 101 0408100 3.297,00 0408101 3.661,00 0408012 2.759,00 0408013 2.965,00 102 0408104 3.935,00 0408105 4.296,00 0408016 3.395,00 0408017 3.600,00 111 0408108 3.928,00 0408109 4.291,00 0408020 3.238,00 0408021 3.445,00 112 0408112 4.695,00 0408113 5.057,00 0408024 4.002,00 0408025 4.206,00 142 0408120 6.814,00 0408121 7.213,00 0408032 5.691,00 0408033 5.920,00 143 0408124 7.955,00 0408125 8.357,00 0408036 6.833,00 0408037 7.064,00 > * Falls Fertigbohrungen in den Maßen der angegebenen Vorbohrungen oder kleiner in Flansch- und/oder Kupplungsnabe nach Katalog verlangt werden, bedingt das einen Mehrpreis. Bitte fragen Sie an. > * If ready-bored holes in the dimensions of the pre-bored holes or smaller are demanded in the flange and/or clutch hub according to catalogue an additional amount will be charged. Please enquire. D Schaltvorrichtungen Handhebelschaltung Bauart SH GB Switching Device, Hand Lever of the Type SH Kupplungsgröße/ Coupling sizes 40 Kupplungsgröße/ Coupling sizes Planox® PMW, PMF Conax® CMW, CMF Art.-Nr./ No. EUR Planox® PMW, PMF Conax® CMW, CMF Art.-Nr./ No. EUR 61, 71, 81 1, 2 0415701 479,00 161, 162, 163 16 0415705 1.040,00 101, 102, 111, 112 3 0415702 544,00 181, 181 183 16 0415707 1.272,00 141, 142, 143 5, 8 0415703 682,00 211 - 213, 241 - 243 16 0415708 1.272,00 D Conax®-Reibkupplungen Bauart CM GB Conax® Friction Clutches of the Type CM CMW CMF Standardausführung Grauguss / Standard design in grey cast iron Größe Size 1 2 3 5 8 16 Wellenkupplung/ shaft coupling vorgebohrt pre-bored Art.-Nr./No 0414408 0414412 0414416 0414420 0414424 0414428 Flanschkupplung/ flange coupling fertiggebohrt u. genutet* finished bore and keyway* EUR 1.265,00 1.574,00 1.776,00 2.325,00 3.179,00 7.430,00 Art.-Nr./No. 0414409 0414413 0414417 0414421 0414425 0414429 EUR 1.473,00 1.832,00 2.064,00 2.652,00 3.550,00 8.011,00 vorgebohrt pre-bored Art.-Nr./No. 0414128 0414132 0414136 0414140 0414144 0414148 fertiggebohrt u. genutet* finished bore and keyway* EUR 1.091,00 1.370,00 1.534,00 2.032,00 2.711,00 6.615,00 Art.-Nr./No. 0414129 0414133 0414137 0414141 0414145 0414149 D Conax®-Rutschkupplungen Bauart CR** GB Conax® Slip Clutches of the Type CR** CRW EUR 1.191,00 1.494,00 1.677,00 2.208,00 2.906,00 6.964,00 CRF Standardausführung Grauguss / Standard design in grey cast iron Größe Size 0,5 1 2 3 5 8 16 •25 Wellenkupplung/ shaft coupling vorgebohrt pre-bored Art.-Nr./No 0414280 0414284 0414288 0414292 0414296 0414300 0414304 0414308 EUR 465,00 719,00 889,00 1.156,00 1.531,00 2.278,00 4.338,00 8.816,00 Flanschkupplung/ flange coupling fertiggebohrt u. genutet* finished bore and keyway* Art.-Nr./No.. 0414281 0414285 0414289 0414293 0414297 0414301 0414305 0414309 EUR 612,00 928,00 1.141,00 1.449,00 1.857,00 2.649,00 4.924,00 9.872,00 vorgebohrt pre-bored Art.-Nr./No. 0414000 0414004 0414008 0414012 0414016 0414020 0414024 0414028 EUR 310,00 543,00 657,00 920,00 1.238,00 1.812,00 3.526,00 6.959,00 fertiggebohrt u. genutet* finished bore and keyway* Art.-Nr./No. 0414001 0414005 0414009 0414013 0414017 0414021 0414025 0414029 EUR 382,00 646,00 811,00 1.060,00 1.409,00 2.005,00 3.872,00 7.562,00 > * Falls Fertigbohrungen in den Maßen der angegebenen Vorbohrungen oder kleiner in Flansch- und/oder Kupplungsnabe nach Katalog verlangt werden, bedingt das einen Mehrpreis. Bitte fragen Sie an. **Auf Wunsch wird die Kupplung auf das gewünschte Drehmoment eingestellt und eingeschliffen. Mehrpreis auf Anfrage. • nicht bevorratet > * If ready-bored holes in the dimensions of the pre-bored holes or smaller are demanded in the flange and/or clutch hub according to catalogue an additional amount will be charged. Please enquire. **If required the clutch will be set to the desired torque and ground. Details of additional charge on request. • not stocked 41 D Taper Spannbuchsen auf Vorrat GB Taper bushes on stock Buchsen Nr. Bush No. 1008 10-25 1108 10-28 1210 11-32 1610 14-42 1615 14-42 2012 14-50 2517 16-65 3020 25-75 3030 35-75 3525 35-100 3535 35-90 4030 40-115 4040 40-100 4535 55-125 4545 55-110 5040 70-125 5050 70-125 EUR 17,80 20,20 26,70 32,00 33,20 38,70 49,40 64,30 83,60 145,00 160,00 207,00 227,00 265,00 289,00 433,00 461,00 >Einschließlich Schrauben; Tabelle der Bohrungs-Ø der vorrätigen Buchsen Seite 3 >Including screws; table of hole diameters of bushes on stock page 3 42 D Notizen GB Notes 43 © 2015 DESCH Antriebs t echnik GmbH & Co. KG · PA 15 - D / GB Postfach 14 40 | 59753 Arnsberg/Germany Kleinbahnstraße 21 | 59759 Arnsberg/Germany T +49 2932 300 0 | F +49 2932 300 899 I www.desch.de | E [email protected] DESCH DPC DESCH Canada Ltd. DESCH Italien DESCH China DESCH do Brasil GmbH & Co. KG 240 Shearson Crescent Drive Technology Machinery (Shanghai) Ltd. Power Transmission S.A. Postfach 14 40 Cambridge, Ufficio di rappresentanza No.10 Building, Rdv Edgar Máximo 59753 Arnsberg/Germany Ontario in Italia No. 2317 Shengang Road, Zambotto, s/n km 54 Kleinbahnstraße 21 Canada N 1T 1J6 Via Cavriana, 3 Songjiang District Campo Limpo Paulista - SP, 59759 Arnsberg/Germany T +1800 2631866 20134 Milano/Italy 201612 Shanghai/China CEP: 13.231-700 T +49 2932 300 0 +1519 6214560 T +3902 7391280 T +86 21 5771 8058 818 T +55 11 4039 8240 F +49 2932 300 830 F +1519 6231169 F +3902 7391281 F +86 21 5765 5155 F +55 11 4039 8222 Iwww.desch.de Iwww.desch.de Iwww.desch.de Iwww.desch.de Iwww.desch.de [email protected] [email protected] [email protected] [email protected] [email protected] Technische Änderungen vorbehalt en / Technical changes reser ved DESCH Antriebstechnik GmbH & Co. KG
© Copyright 2024 ExpyDoc