testo 420 - Volume flow hood
Tripod
Short manual
3 Installation
Pos: 1 /TD/Kurzanleitungen/testo 420/testo 420 Stativ @ 18\mod_1439904534789_79.docx @ 219159 @ 11122 @ 1
1
Safety
The tripod (0554 4209) may only be used in conjunction
with the testo 420.
CAUTION
Risk of injury due to telescope segments popping
out!
> Secure telescope segment manually before
disengaging the lock.
> Retract and extend telescope segments with care.
2
Technical data
Feature
Values
Height
•
•
Max. load
2.9 kg
Whole tripod 4 m
Individual element 1 m
3
Installation
3.1.
Installing the wheels
1. Push the wheel onto the tripod leg so that the arrow is pointing
to the screw.
2. Tighten the screw.
3. Repeat steps 1 and 2 for all wheels.
2
3 Installation
3.2.
Constructing the tripod
1. Pull the tripod legs apart until the middle connecting rods are at
an angle of <90°.
2. Tighten the screw.
3. Place the measuring base onto the tripod, making sure that the
tripod clicks into the designated holder on the measuring base.
=== Ende der Liste für Textmarke Inhalt ===
3
0970 4209 en 01