2016 Road
Frame Fit Specifications
This document is intended to communicate general frame fit guidelines for SRAM road group sets.
For additional information, please contact your SRAM representative.
Gen000000004873 Rev B
© 2015 SRAM, LLC
Table of Contents
ELECTRIC SHIFTERS..............................................................................................................................................................��������������������������������������������������������������������������������� 5
BLIPBOX™................................................................................................................................................................................................................................................................................................................6-8
BLIPS.............................................................................................................................................................................................................................................................................................................................9
BLIPBOX™ AND BLIPS............................................................................................................................................................................................................................................................................................10
BLIP CLAMP AND BLIPGRIP................................................................................................................................................................................................................................................................................. 11
ETAP SHIFT/BRAKE LEVERS............................................................................................................................................................................................................................................................................... 12
ELECTRIC FRONT DERAILLEUR...........................................................................................................................................................................................................................13
RED ETAP®........................................................................................................................................................................................................................................................................................................... 14-19
2X11 FRONT DERAILLEURS................................................................................................................................................................................................................................. 20
RED/FORCE/RIVAL.......................................................................................................................................................................................................................................................................................... 21-25
2X10 FRONT DERAILLEURS.................................................................................................................................................................................................................................26
APEX..................................................................................................................................................................................................................................................................................................................... 27-31
135 MM OLD FRONT DERAILLEURS.................................................................................................................................................................................................................... 32
REAR DERAILLEURS..............................................................................................................................................................................................................................................34
2X11 - RED/FORCE/RIVAL................................................................................................................................................................................................................................................................................... 35
1X11 - FORCE 1/RIVAL 1......................................................................................................................................................................................................................................................................................... 36
2X10 - APEX..............................................................................................................................................................................................................................................................................................................37
2X11 CRANKSETS....................................................................................................................................................................................................................................................38
CRANKSET MEASUREMENT DIAGRAM - 2X11 .............................................................................................................................................................................................................................................. 39
RED ............................................................................................................................................................................................................................................................................................................................40
RED QUARQ POWER METERS/FORCE/S902/S952..................................................................................................................................................................................................................................... 41
RIVAL/S552.............................................................................................................................................................................................................................................................................................................. 42
1X11 CRANKSETS.....................................................................................................................................................................................................................................................43
CRANKSET MEASUREMENT DIAGRAM - 1X11................................................................................................................................................................................................................................................ 44
FORCE 1..................................................................................................................................................................................................................................................................................................................... 45
RIVAL 1....................................................................................................................................................................................................................................................................................................................... 46
S350-1........................................................................................................................................................................................................................................................................................................................ 47
2X10 AND 1X1 CRANKSETS...................................................................................................................................................................................................................................48
CRANKSET MEASUREMENT DIAGRAM - 2X10.............................................................................................................................................................................................................................................. 49
CRANKSET MEASUREMENT DIAGRAM - 1X10/1X1....................................................................................................................................................................................................................................... 50
RIVAL OCT................................................................................................................................................................................................................................................................................................................. 51
S901/S951................................................................................................................................................................................................................................................................................................................. 52
S900/S950............................................................................................................................................................................................................................................................................................................... 53
S500/S550............................................................................................................................................................................................................................................................................................................... 54
APEX/ELITA/S300/S350..................................................................................................................................................................................................................................................................................... 55
TOURO/S100/S150................................................................................................................................................................................................................................................................................................. 56
ISOFLOW ..................................................................................................................................................................................................................................................................................................................57
OMNIUM.................................................................................................................................................................................................................................................................................................................... 58
WIDE AXLE CRANKSETS......................................................................................................................................................................................................................................59
CRANKSET MEASUREMENT DIAGRAM - WIDE AXLE................................................................................................................................................................................................................................60
RIVAL/S552 WIDE AXLE....................................................................................................................................................................................................................................................................................... 61
S902/S952 WIDE AXLE........................................................................................................................................................................................................................................................................................ 62
S500/S550 WIDE AXLE....................................................................................................................................................................................................................................................................................... 63
BOTTOM BRACKETS..............................................................................................................................................................................................................................................66
PRESSFIT GXP™...................................................................................................................................................................................................................................................................................................... 67
PRESSFIT GXP™ - 135 OLD WIDE AXLE .......................................................................................................................................................................................................................................................... 68
PRESSFIT 30™....................................................................................................................................................................................................................................................................................................69-70
GXP® ENGLISH/GXP ITALIAN/POWERSPLINE............................................................................................................................................................................................................................................... 71
BB30™.........................................................................................................................................................................................................................................................................................................................72
BRAKES.................................................................................................................................................................................................................................................................... 73
RED/FORCE/RIVAL/S700............................................................................................................................................................................................................................................................................. 74-78
RED/FORCE/RIVAL........................................................................................................................................................................................................................................................................................ 79-80
RED/FORCE/RIVAL/S700/BB7/BB5 ROAD.................................................................................................................................................................................................................................................... 81
BB7/BB5 ROAD....................................................................................................................................................................................................................................................................................................... 82
RED/FORCE/RIVAL/APEX/S700 ...............................................................................................................................................................................................................................................................83-85
SINGLE DIGIT ....................................................................................................................................................................................................................................................................................................86-87
SHORTY ULTIMATE................................................................................................................................................................................................................................................................................................ 88
SHORTY 6/SHORTY 4........................................................................................................................................................................................................................................................................................... 89
WHEELS.................................................................................................................................................................................................................................................................. 90
ZIPP WHEELS........................................................................................................................................................................................................................................................................................................... 91
DRIVER AND WHEEL STANDARD - ROAD................................................................................................................................................................................................................................................ 92-93
REAR MAXLE™................................................................................................................................................................................................................................................................................................. 94-95
FRONT MAXLE™................................................................................................................................................................................................................................................................................................96-97
All dimensions are in millimeters unless otherwise noted.
Images in this document are not to scale.
Your product's appearance may vary slightly from the images in this document.
Information in this document is subject to change without prior notice.
If you have any questions please contact your SRAM representative.
Electric
Shifters
BlipBox™
BlipBox Wireless Shifter Dimensions
18 mm
40.6 mm
61.5 mm
2 Front (Button side)
Side
Back (Battery/Mount)
Notes:
1
Overall dimensions are subject to change during the development.
2 Button access needed for pairing and adjustment of the derailleurs.
6 2016 Rev B
Electric
BlipBox™
BlipBox Wireless Shifter with Connectors
18 mm
1
72 mm
Notes:
1
7 Allow sufficient space for shifter and connector length in desired mounting location.
2016 Rev B
Electric
BlipBox™
Mounting Specifications
1
4 90° Lock mount
Threaded direct mount
M4x0.7 thread pitch, 4.6 mm depth
Notes:
1
Consider additional clearance for 90° lock mount
2 Cable connections can be made after mounting with proper port access.
3 Button access is only needed for setup.
4 90° mount is compatible with all SRAM/Zipp Quickview mounts.
5 BlipBox must be mounted externally on the bike to maintain integrity of the wireless signal.
8 2016 Rev B
Electric
Blips
Remote Shift Buttons and Connector Dimensions
Left shift button
1
2 Wire lengths
150 mm
230 mm
450 mm
650 mm
31.35 mm
Right shift button
2.5 mm wire diameter
1
5.0 mm connector diameter
Notes:
1
Consider the connector diameter and wire length when routing wires internally.
2 Choose the wire lengths based on application and desired location of the Blips.
9 2016 Rev B
Electric
BlipBox™ and Blips
Internal Mounting Specifications
Side A
Side B
100 mm
1
100 mm
2
Notes:
1
Internally mounted shifter setup requires the Blip wires to be routed external of bar, stem, and frame materials a
minimum of 100 mm per side.
2 Routing under bar tape is acceptable within the 100 mm length.
10 2016 Rev B
Electric
Blip Clamp and BlipGrip
31.8 mm bar
1
22.2 mm TT Extensions
Remote Shifter Mounting
22.2-35 mm bar
2
Notes:
1
Button holder designed for 31.8 mm bar mounting.
2 Direct mount under the handlebar tape for 22.2 mm through 35 mm diameter bars.
11 2016 Rev B
Electric
eTap Shift/Brake Levers
Remote Shifter Connections
2
Notes:
1
The left and right shifter brake each provide two additional ports for auxiliary remote shifter buttons.
2 Use plugs when remote shifters are not in use.
3 Provide a small amount of slack in the wire for shifter brake repositioning.
4 Route the wires underneath the bar tape.
12 2016 Rev B
Electric
Electric Front
Derailleur
RED eTap®
Front Derailleur Dimensions
Hanger contact face
57
14
8.4
46
22.9
Fixation bolt center
40
41
14 2016 Rev B
Electric Front Derailleur
RED eTap®
Front Derailleur Frame Compatibility and Capacity Information
2x11
Chainring
Chainline
A (mm)
Fixation bolt position
55/42
151
53/39
147
52/36
45 mm
145
50/34
141
46/36
133
B
Chainstay angle
C (mm)
Chainstay length
61° - 66°
≥ 405
* For 32T cassettes the chainstay angle (B) is 63-66°
B
A
C
15 2016 Rev B
Electric Front Derailleur
RED eTap®
Front Derailleur Cage Alignment
Chainring
D (mm)
Hanger offset
from seat tube axis
E
Hanger angle
relative to seat tube axis
F (mm)
8.7 ± 0.5
± 1.5°
>0
G (mm)
Outer cage position above chainring
55/42
2x11
53/39
52/36
1.75 ± 0.5
50/34
46/36
D
E
G
F
16 2016 Rev B
Electric Front Derailleur
RED eTap®
2x11
Position of Front Derailleur with Clamp Adapter
Chainring
H (mm)
Lower clamp position
I (mm)
Upper clamp position
55/42
136
157
53/39
132
153
52/36
130
151
50/34
126
147
46/36
118
139
I
H
BB Axis
17 2016 Rev B
Electric Front Derailleur
RED eTap®
Clearance Between Front Derailleur and Frame
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
130 OLD: 25
5 - 5.5
5.75
16
29
21.2
Clearance Between Front Derailleur and Crank Arm
G (mm)
H (mm)
34
90.4
Fixation bolt center
A
27
A
7.55
Bottom bracket
center
8.7 Ø34.9
57
A
G
B
14
C
Fixation bolt center
F
E
D
H
Tire clearance to battery 20.1
D
18 2016 Rev B
Electric Front Derailleur
RED eTap®
Braze-on Hanger Dimensions
R7.6
11.3
R5
0±0.5 mm
Center line of
seat tube to center
line of bottom
bracket
8.7
90°
34
25
19 2016 Rev B
Electric Front Derailleur
2x11 Front
Derailleurs
RED/Force/Rival
Front Derailleur Frame Compatibility and Capacity Information
2x11
Chainring
Cable routing
Chainline
A (mm)
Fixation bolt position
55/42
151
53/39
147
52/36
Bottom pull
(N/A for Electronic)
45 mm
145
B
Chainstay angle*
C (mm)
Chainstay length
≥ 395
61° - 66°
≥ 405
50/34
141
46/36
133
* For 32T cassettes the chainstay angle (B) is 63-66°
B
A
C
21 2016 Rev B
2x11 Front Derailleurs
RED/Force/Rival
Front Derailleur Cage Alignment
Chainring
D (mm)
Hanger offset
from seat tube axis
E
Hanger angle
relative to seat tube axis
F (mm)
8.7 ± 0.5
± 1.5°
>0
G (mm)
Outer cage position above chainring
55/42
2x11
53/39
52/36
1.75 ± 0.5
50/34
46/36
E
D
G
F
22 2016 Rev B
2x11 Front Derailleurs
RED/Force/Rival
2x11
Position of Front Derailleur with Clamp Adapter
Chainring
H (mm)
Lower clamp position
I (mm)
Upper clamp position
55/42
136
157
53/39
132
153
52/36
130
151
50/34
126
147
46/36
118
139
I
H
BB Axis
23 2016 Rev B
2x11 Front Derailleurs
RED/Force/Rival
Clearance Between Front Derailleur and Frame
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
130 OLD: 25
5 - 5.5
5.75
16
29
21.2
Clearance Between Front Derailleur and Crank Arm
G (mm)
H (mm)
34
90.4
A
A
B
A
B
Bottom bracket
center
C
G
Fixation Bolt Center
E
F
H
D
D
24 2016 Rev B
2x11 Front Derailleurs
RED/Force/Rival
Braze-on Hanger Dimensions
R7.6
11.3
R5
0±0.5 mm
Centerline of
seat tube to
centerline of bottom
bracket
8.7
90°
34
25
25 2016 Rev B
2x11 Front Derailleurs
2x10 Front
Derailleurs
Apex
Front Derailleur Frame Compatibility and Capacity Information
2x10
Chainring
Cable routing
Chainline
A (mm)
Fixation bolt position*
55/42
154 (lower hole)
54/42
152 (lower hole)
53/39
150 (lower hole)
52/36
Bottom pull
46 mm
148 (lower hole)
52/38
148 (lower hole)
50/34
152 (upper hole)
46/36
144 (upper hole)
B
Chainstay angle
C (mm)
Chainstay length
≥ 395
61° - 66°
≥ 405
* Mounting holes are spaced 8.5 mm apart.
B
A
C
27 2016 Rev B
2x10 Front Derailleurs
Apex
Front Derailleur Cage Alignment
Chainring
D (mm)
Hanger offset
from seat tube axis
E
Hanger angle
relative to seat tube axis
F (mm)
8.7 ± 0.5
± 1.5°
>0
G (mm)
Outer cage position above chainring
55/42
54/42
2x10
53/39
52/36
1.75 ± 0.5
52/38
50/34
46/36
E
D
G
F
28 2016 Rev B
2x10 Front Derailleurs
Apex
2x10
Position of Front Derailleur Clamp
Chainring
H (mm)
Lower clamp position
I (mm)
Upper clamp position
55/42
149
166
54/42
147
164
53/39
145
162
52/36
143
160
52/38
143
160
50/34
139
156
46/36
131
148
I
H
BB Axis
29 2016 Rev B
2x10 Front Derailleurs
Apex
Clearance Between Front Derailleur and Frame
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
25
5
8.4
15.2
34.2 (upper hole)
27.7 (upper hole)
Clearance Between Front Derailleur and Crank Arm
G (mm)
H (mm)
31
85.3
A
A
B
A
B
Bottom bracket
center
C
G
Fixation Bolt Center
E
F
H
D
D
30 2016 Rev B
2x10 Front Derailleurs
Apex
Braze-on Hanger Dimensions
R7.6
11.3
R5
0±0.5 mm
Centerline of
seat tube to
centerline of bottom
bracket
8.7
90°
34
25
31 2016 Rev B
2x10 Front Derailleurs
135 mm OLD
Front Derailleurs
135 mm OLD
Position of Front Derailleur with Clamp Adapter and Braze-On
Frame BB shell width
[GXP, BB30, PF30]
Crankset
Chainline (mm)
FD placement (mm)
SRAM 135 mm OLD
Specific Crankset
Required
47.5
27.5
Available clamp
diameters (mm)
Q-factor (mm)
Braze-on
73 mm
(or 68 mm plus spacers)*
150
31.8
34.9
Clamp adapter
*68 mm BB shells may be spaced to 73 mm by installing a 2.5 mm BB cup spacer. GXP uses the spacer behind the BB cup, and BB30 models use the spacer on the outside of the BB
cup shields.
Notes:
Frame BB shell width and rear hub OLD are measured in total width.
Chainline and FD placement are measured from the centerline of the bike.
Standard Braze-on and Clamp Adapter
Drawings not to scale
68 mm
25 mm
33 2016 Rev B
135 Braze-on
73 mm
27.5 mm
135 SRAM Clamp Adapter
73 mm
27.5 mm
135 mm OLD
Rear Derailleurs
2x11 - RED/Force/Rival
Rear Derailleur Hanger
Rear Derailleur Hanger Specifications
L (mm)
X (mm)
A
R1 (mm)
R2 (mm)
T (mm)
D (mm)
24 - 28
7 - 10
30° - 35°
8.5 (max)
11.5 - 12.5
7-8
11.0 ± 1.5
To center of
bottom bracket
R2
L
T
T
T
R1
90°
A
X
D
35 2016 Rev B
Rear Derailleurs
1x11 - Force 1/Rival 1
Rear Derailleur Hanger
Rear Derailleur Hanger Specifications
L (mm)
X (mm)
A
R1 (mm)
R2 (mm)
T (mm)
D (mm)
24 - 28
7 - 10
30° - 35°
8.5 (max)
11.5 - 12.5
7-8
11.0 ± 1.5
To center of
bottom bracket
R2
L
T
T
T
R1
90°
A
X
D
36 2016 Rev B
Rear Derailleurs
2x10 - Apex
Rear Derailleur Hanger
Rear Derailleur Hanger Specifications
L (mm)
X (mm)
A
R1 (mm)
R2 (mm)
T (mm)
D (mm)
24 - 28
7 - 10
30° - 35°
8.5 (max)
11.5 - 12.5
7-8
11.5 ± 1.5
To center of
bottom bracket
R2
L
T
T
T
R1
90°
A
X
D
37 2016 Rev B
Rear Derailleurs
2x11 Cranksets
Crankset Measurement Diagram - 2x11
L1
L2
W5
W4
L3
W3
W1
L4
L5
W6
39 2016 Rev B
2x11 Cranksets
RED
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
L3 (mm)
L4 (mm)
57.0
71.0
88.0
113.1
38.0
47.5
53/39
81.8
109.2
37.7
47.5
52/36
75.0
107.0
71.0
103.2
75.0
95.1
2x11
55/42
50/34
46/36
47.0
61.0
L5 (mm)
W1 (mm)
197.0
W3 (mm)
W4 (mm)
40.0
38.0
W5 min (mm) W6 min (mm)
60.0
60.0
48.0
Q-factor : 145
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
40 2016 Rev B
2x11 Cranksets
RED Quarq Power Meters/Force/S902/S952
Crankset Frame Clearance Information
Chainring
L1 (mm)
55/42
57.0
L2 (mm)
L3 (mm)
L4 (mm)
L5 (mm)
W1 (mm)
87.0
113.1
38.0
81.8
109.2
37.7
75.0
107.0
71.0
103.2
75.0
95.1
W3 (mm)
71.0
2x11
53/39
57.0
52/36
50/34
46/36
47.0
61.0
W4 (mm)
W5 min (mm)
W6 min (mm)
60.0
60.0
47.5
197.0
40.0
38.0
48.0
Q-factor : 145
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
41 2016 Rev B
2x11 Cranksets
Rival/S552
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
2x11
52/36
50/34
46/36
47.0
61.0
L3 (mm)
L4 (mm)
75.0
106.8
71.0
103.1
75.0
95.1
L5 (mm)
W1 (mm)
W3 (mm)
W4 (mm)
192.1
38.5
40.4
48.1
W5 min (mm)
61.3
GXP
PFGXP
60.3
BB30
PF30
W6 min (mm)
61.3
GXP
PFGXP
60.1
BB30
PF30
Q-factor : 149.6 (GXP : PFGXP) 147.4 (BB30 : PF30)
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
42 2016 Rev B
2x11 Cranksets
1x11 Cranksets
Crankset Measurement Diagram - 1x11
L1
L2
W5
W3
W1
L4
L5
W6
44 2016 Rev B
1x11 Cranksets
Force 1
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
54
W1 (mm)
W3 (mm)
W5 (mm)
W6 (mm)
197.0
38.0
43.7
60.0
60.0
72.0
52
108.2
50
104.1
48
100.1
46
96.1
44
L5 (mm)
112.2
57.0
1x11
L4 (mm)
47.0
62.0
92.0
42
88.0
40
84.0
38
79.9
Q-factor : 145
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
45 2016 Rev B
1x11 Cranksets
Rival 1
Crankset Frame Clearance Information
1x11
Chainring
L1 (mm)
L2 (mm)
L4 (mm)
50
104.1
48
100.1
46
96.1
44
47.0
62.7
92.0
42
88.0
40
84.0
38
79.9
L5 (mm)
W1 (mm)
W3 (mm)
192.1
38.0
43.7
W5 (mm)
61.3
GXP
PFGXP
60.3
BB30
PF30
W6 (mm)
61.3
GXP
PFGXP
60.1
GXP
PFGXP
Q-factor : 149.6 (GXP : PFGXP) 147.4 (BB30 : PF30)
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
46 2016 Rev B
1x11 Cranksets
S350-1
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
L4 (mm)
44
92.0
42
88.0
47.0
62.7
40
84.0
38
79.9
L5 (mm)
W1 (mm)
W3 (mm)
W5 (mm)
W6 (mm)
196.7
38.0
43.7
60.0
60.0
Q-factor : 145
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
47 2016 Rev B
1x11 Cranksets
2x10 and 1x1
Cranksets
Crankset Measurement Diagram - 2x10
L1
L2
W5
W4
L3
W3
W1
L4
L5
W6
49 2016 Rev B
2x10 and 1x1 Cranksets
Crankset Measurement Diagram - 1x10/1x1
L1
L2
W5
W3
W1
L4
L5
W6
50 2016 Rev B
2x10 and 1x1 Cranksets
Rival OCT
with Powerglide™ Chainrings
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
L3 (mm)
L4 (mm)
53/39
57.0
71.0
81.0
109.2
52/38
79.0
52/36
75.0
L5 (mm)
W1 (mm)
W3 (mm)
W4 (mm)
196.0
38.0
40.0
47.3
W5 min (mm) W6 min (mm)
2x10
107.2
47.0
61.0
50/34
103.2
61.0
61.0
71.0
48/34
99.0
46/38
57.0
71.0
79.0
46/36
47.0
61.0
75.0
95.1
Q-factor : 147
Bottom Bracket Type : GXP® : PFGXP™
51 2016 Rev B
2x10 and 1x1 Cranksets
S901/S951
Yaw™ Compatible
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
57.0
71.0
2x10
55/42 TT
53/39
50/34
47.0
61.0
L3 (mm)
L4 (mm)
88.0
113.3
81.8
109.2
71.0
103.2
L5 (mm)
W1 (mm)
W3 (mm)
W4 (mm)
W5 min (mm)
W6 min (mm)
60.0
60.0
38.0
48.0
197.0
37.7
38.0
40.0
48.3
Q-factor : 145
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
52 2016 Rev B
2x10 and 1x1 Cranksets
S900/S950
with Powerglide™ Chainrings
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
L3 (mm)
55/42 TT
L4 (mm)
L5 (mm)
W1 (mm)
W3 (mm)
W4 (mm)
W5 min (mm)
W6 min (mm)
197.0
38.0
40.0
47.3
60.0
60.0
113.3
88.0
2x10
54/42 TT
57.0
71.0
111.3
53/39
81.0
52/38
79.0
109.2
107.2
52/36
75.0
47.0
61.0
50/34
103.2
71.0
48/34
99.0
46/38
57.0
71.0
79.0
46/36
47.0
61.0
75.0
95.1
Q-factor : 145
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
53 2016 Rev B
2x10 and 1x1 Cranksets
S500/S550
with Powerglide™ Chainrings
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
L3 (mm)
L4 (mm)
53/39
57.0
71.0
81.0
109.2
52/38
79.0
52/36
75.0
L5(mm)
W1 (mm)
W3 (mm)
W4 (mm)
W5 min (mm)
W6 min (mm)
196.5
38.0
40.0
47.3
60.0
60.0
2x10
107.2
47.0
61.0
50/34
103.2
71.0
48/34
99.0
46/38
57.0
71.0
79.0
46/36
47.0
61.0
75.0
95.1
Q-factor : 145
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
54 2016 Rev B
2x10 and 1x1 Cranksets
Apex/Elita/S300/S350
with Powerglide™ Chainrings
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
L3 (mm)
L4 (mm)
53/39
57.0
71.0
81.0
109.2
52/38
L5 (mm)
L6 (mm)
W1 (mm) W2 (mm) W3 (mm) W4 (mm)
W5 min (mm)
W6 min (mm)
60.0
60.0
79.0
107.2
2x10
52/36
75.0
47.0
61.0
50/34
71.0
48/34
46/38
38.0
103.2
99.0
57.0
71.0
n/a
196.7
40.0
47.3
n/a
79.0
1x1
95.1
46/36
47.0
61.0
75.0
48
57.0
71.0
n/a
99.0
38.5
40.5
n/a
Q-factor : 145
Bottom Bracket Type : GXP® : PFGXP™ : BB30™ : PF30™
55 2016 Rev B
2x10 and 1x1 Cranksets
Touro/S100/S150
with Powerglide™ Chainrings
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
L3 (mm)
L4 (mm)
53/39
57.0
71.0
81.0
109.2
52/38
79.0
52/36
75.0
L5 (mm)
W1 (mm)
W3 (mm)
W4 (mm)
W5 min (mm)
W6 min (mm)
61.0
59.0
2x10
107.2
47.8
50/34
61.0
47.0
103.2
71.0
38.5
40.5
46/36
75.0
95.1
1x1
99.0
48
99.0
n/a
n/a
1x
48/34
190.5
G52
107.2
112.5
46.0
71.0
57.0
Q-factor : 145
Bottom Bracket Type : PowerSpline
56 2016 Rev B
2x10 and 1x1 Cranksets
IsoFlow
with Powerglide™ Chainrings
2x10
Crankset Frame Clearance Information
Chainring
L1 (mm)
50/34
47.0
L2 (mm)
L3 (mm)
L4 (mm)
71.0
103.2
1x
71.0
G52
57.0
L5 (mm)
112.5
W3 (mm)
W4 (mm)
W5 min (mm)
W6 min (mm)
61.0
59.0
47.8
191.8
107.2
W1 (mm)
38.5
40.5
46.0
Q-factor : 145
Bottom Bracket Type : PowerSpline
57 2016 Rev B
2x10 and 1x1 Cranksets
Omnium
1x1
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
L4 (mm)
L5 (mm)
W1 (mm)
W3 (mm)
W5 min (mm)
W6 min (mm)
48
64.5
78.0
99.1
195.4
35.5
42.5
55.0
54.7
Q-factor : 135
Bottom Bracket Type : GXP® : PFGXP™
58 2016 Rev B
2x10 and 1x1 Cranksets
Wide Axle
Cranksets
Crankset Measurement Diagram - Wide Axle
L1
L2
W5
W4
L3
W3
W1
L4
L5
W6
60 2016 Rev B
Wide Axle Cranksets
Rival/S552 Wide Axle
Crankset Frame Clearance Information
2x11
Chainring
L1 (mm)
L2 (mm)
47.0
61.0
52/36
50/34
L3 (mm)
L4 (mm)
75.0
106.8
71.0
103.1
L5 (mm)
W1 (mm)
W3 (mm)
W4 (mm)
192.1
41.0
42.9
50.6
W5 min (mm)
W6 min (mm)
63.8
63.8
62.8 (BB30)
62.6 (BB30)
Q-factor : 154.6 (GXP : PFGXP) 152.4 (BB30 : PF30)
Bottom Bracket Type : GXP® : BB30™ : PF30™
61 2016 Rev B
Wide Axle Cranksets
S902/S952 Wide Axle
Crankset Frame Clearance Information
Chainring
L1 (mm)
55/42
57.0
L2 (mm)
L3 (mm)
L4 (mm)
87.0
113.1
81.8
109.2
75.0
107.0
71.0
103.2
75.0
95.1
L5 (mm)
W1 (mm)
W3 (mm)
71.0
2x11
53/39
57.0
52/36
50/34
46/36
47.0
61.0
W4 (mm)
W5 min (mm)
W6 min (mm)
62.5
62.5
50
197.0
40.5
42.5
50.5
Q-factor : 150
Bottom Bracket Type : GXP® : BB30™ : PF30™
62 2016 Rev B
Wide Axle Cranksets
S500/S550 Wide Axle
with Powerglide™ Chainrings
2x10
Crankset Frame Clearance Information
Chainring
L1 (mm)
L2 (mm)
L3 (mm)
L4 (mm)
53/39
57.0
71.0
81.0
109.2
50/34
47.0
61.0
71.0
103.2
L6 (mm)
W1 (mm)
W3 (mm)
W4 (mm)
W5 min (mm)
W6 min (mm)
196.5
40.5
42.5
49.8
62.5
62.5
Q-factor : 150
Bottom Bracket Type : GXP® : BB30™ : PF30™
63 2016 Rev B
Wide Axle Cranksets
135 mm OLD frame
130 mm OLD Frame
The diagram below illustrates the potential problems of using a crankset designed for a 130 mm OLD frame on a 135 mm OLD frame.
65 mm
68 mm BB shell
Clamp Adapter
Interference in the small chainring
135 mm OLD Frame
67.5 mm
64 68 mm BB shell
Clamp Adapter
WA R N I N G - C R A S H H A Z A R D
When the chain is on the small chainring and
smallest rear cog, reduced clearance between the
chain and large chainring upshift rivets can cause the
chain to unintentionally catch on the upshift rivets,
which may lead to loss of control of the bicycle.
2016 Rev B
Wide Axle Cranksets
135 mm OLD frame
130 mm OLD Frame
The diagram below illustrates the potential problems of using a crankset designed for a 130 mm OLD frame on a 135 mm OLD frame.
65 mm
68 mm BB shell
Clamp Adapter
Increased Chain Angle in the large chainring
WA R N I N G - C R A S H H A Z A R D
Increased chain angle can cause the chain to derail
outboard off of the large chainring under very high
pedaling loads, which may lead to a crash and
serious injury and/or death to the rider.
135 mm OLD Frame
67.5 mm
68 mm BB shell
Clamp Adapter
NOTICE
Due to limited clearance, contact between chain and
crank arm is likely under hard pedaling load.
65 2016 Rev B
Wide Axle Cranksets
Bottom Brackets
PressFit GXP™
86.5 mm Road Symmetric Shell Specifications
A
86.5 ±0.5
Ø41
43.25
0
-0.05
4
3
A
I
-A-
Frame Center
86.5 mm Road Symmetric Bottom Bracket Specifications
Description
1
1
Wave Washer
2
1
DS Shield
3
1
NDS Shield
4
1
DS Cup
5
1
NDS Cup
Notes
1
GXP integrated adapter is only compatible
with the bottom bracket shell specifications
shown.
2)
Only dimensions essential to bottom bracket
PressFit and function are shown. Dimensions
apply after finishing.
3
Tolerance applies to depth of 14 mm from
surface -A- , on each side.
4
PressFit surfaces should be unpainted.
5)
180 kg is the maximum recommended frame
press-in force.
67 2016 Rev B
86.5 ±0.5
16.05
3
(2X)
5
2
4
1
3
Drive Side (DS)
Quantity
Non-Drive Side (NDS)
Item Number
Ø44
(2X)
Ø27.8
Ø34
14.8
24.5
9.75 PressFit
region (2x)
Bottom Brackets
PressFit GXP™ - 135 OLD Wide Axle
91.5 mm Road Symmetric Shell Specifications
A
91.5 ±0.5
Ø41
45.75
0
-0.05
4
3
A
I
-A-
Frame Center
91.5 mm Road Symmetric Bottom Bracket Specifications
Description
1
1
Wave Washer
2
1
DS Shield
3
1
NDS Shield
4
1
DS Cup
5
1
NDS Cup
Notes
1
GXP Integrated adapter is only compatible
with the bottom bracket shell specifications
shown.
2)
Only dimensions essential to bottom bracket
PressFit and function are shown. Dimensions
apply after finishing.
3
Tolerance applies to depth of 14 mm from
surface -A- , on each side.
4
PressFit surfaces should be unpainted.
5)
180 kg is the maximum recommended frame
press-in force.
68 2016 Rev B
91.5 ±0.5
16.05
3
(2X)
5
2
4
1
3
Drive Side (DS)
Quantity
Non-Drive Side (NDS)
Item Number
Ø44
(2X)
Ø27.8
Ø34
14.8
27.5
9.75 PressFit
region (2x)
Bottom Brackets
PressFit 30™
SRAM® PressFit 30™ (PF30) bottom brackets have been designed and tested to work within the bounds of the dimensions and tolerances in the
shell specifications and bottom bracket specifications. Materials, manufacturing methods, and frame shell designs can potentially influence the
performance of the bottom bracket, even when the shell is manufactured to these specifications. In these instances, it is recommended that bicycle
manufacturers confirm the bottom bracket system performance with individual frame configurations.
Things that should be considered when evaluating the frame and bottom bracket interaction include, but are not limited to:
• Loosening of the adapter cups from the bottom bracket shell (frame material choice can greatly affect friction coefficient).
• Binding of bearings within the bottom bracket.
For more information regarding PF30 bottom bracket technical information, contact your SRAM representative.
Shell Specifications
B
W ±0.25
4
(NDS)
DS ±0.5
13 MIN
13 MIN
A
2X 1±0.5 X 45°
0
⌖
0
Ø44.5
MIN
Ø46 -0.05
Ø0.1 A
B
Ø46 -0.05
Dim W
4
PF30 68
68
PF30 79 ASYM
79
Dim DS
Dim NDS
34
34
45
Notes
3
69 2016 Rev B
1.
Dimensions apply after finishing.
2.
Only dimensions essential to bottom bracket PressFit
and function are shown. All other details are left to the
discretion of the frame or component designer. Dimensions
shown do not take the place of proper frame, bottom
bracket shell, or crankset design.
3
PressFit surfaces should be unpainted.
4
Recommended 68 mm or 79 mm for road applications.
Frame Center
Bottom Brackets
PressFit 30™
Continued
Bottom Bracket Specifications
Dim W
3
PF30 68
68
PF30 79 ASYM
79
Dim DS
Dim NDS
Notes
34
34
45
B
1. Dimensions apply after finishing.
2. Only dimensions essential to bottom bracket PressFit
and function are shown. All other details are left to
the discretion of the frame or crankset designer.
Dimensions shown do not take the place of proper
frame, bottom bracket shell, or crankset design.
3 Recommended 68 mm or 79 mm for road
applications.
B
See detail Z
W ± .20
3
Non-Drive Side (NDS)
(2X)
Ø44
Detail Z : Crank bottom bracket interface scale 5 : 1
Ø39
46.01
46.07
(2X)
Ø52
(2X)
Drive Side (DS)
1.5
BB shell shown
for reference
0.04 (2x)
BB Shell to
Shield Outerface - DS
Ø46.76
11.5 ± 0.2
PressFit
region (2x)
(2X)
13.79
14.65
27
11.25 ± 0.2
PressFit region
(2x)
DS
NDS
W+.08 to
Shield - Outerface - NDS
Shield - Outerface - DS
Frame Center
70 2016 Rev B
Bottom Brackets
GXP® English/GXP Italian/PowerSpline
Shell Specifications
GXP English
PowerSpline
Square Taper
A
B
1.37" x 24 TPI R.H. Class 2A
1.37" x 24 TPI L.H. Class 2A
C (mm)
Minimum usable threads
D (mm)
Bottom bracket dimension
68 or 73 ± 0.5*
21
GXP Italian
36 mm x 24 TPI R.H. Class 2A
70 ± 0.5
*2.5 mm spacers may be used between the frame-shell and the adapter cups to adjust BB spacing.
A
B
Chamfer
DO NOT
EXCEED
Ø 36.86 mm
Drive Side (DS)
Non-Drive Side (NDS)
C
D
71 2016 Rev B
Bottom Brackets
BB30™
Information for the BB30 drawing and legal agreement can be found on www.BB30standard.com. Use of the information contained in the drawing
is forbidden without reviewing and agreeing to the legal terms and conditions found on www.BB30standard.com. By using the information
contained in the drawing you are certifying that you have agreed to the terms and conditions found within that legal agreement.
72 2016 Rev B
Bottom Brackets
Brakes
RED/Force/Rival/S700
Riding Conditions
Road Hydraulic Disc Brake Safety Guidelines for Rotor Size and Brake Pad Material
Brake pad material
Minimum rotor size (mm)
Road Riding
Organic
160
Cyclocross Racing
Organic or Metal Sintered
140
WARNING - CRASH HAZARD
SRAM disc brakes pass laboratory testing designed to simulate worst case riding conditions. The rotor size
and pad compound materials recommendations were generated through controlled testing. Use of any
combination not mentioned above will void the warranty and could result in a crash.
74 2016 Rev B
Brakes
RED/Force/Rival/S700
Disc Brake Mount Specification
Frame Mount - QR Dropout
Fork Mount - QR Dropout
Frame Clearance
95 min
0
0.94
0
5.5
6.44
10 min
38 min
10.5
11
15.5
75 2016 Rev B
Brakes
RED/Force/Rival/S700
Disc Brake Mount Specification
Direct mount rotor size
A (mm)
B (mm)
C (mm)
D (mm)
140 mm
47.2
2.2
47.2
89.8
160 mm
56.0
6.8
56.4
98.5
Note: The minimum threaded depth for the mounting holes in the frame is 14 mm.
Chainstay Mount
Seatstay Mount
B
Fork Mount
D
74.2 ±0.1
74.2 ±0.1
C
A
B
D
74.2 ±0.1
A
A
C
B
C
D
76 2016 Rev B
Brakes
RED/Force/Rival/S700
Disc Brake Hose Length Specification
4
Hose boot
Hose length
±10 mm
Attach to caliper here
Banjo connection
under reservoir
cover
Ø5.1 max
4 Hose length
±10 mm
4
4
20 mm
Hose length
Notes
1
2
3
Inline CJ located here
2
77 2016 Rev B
Caliper CJ located here
Connectamajig quick disconnect for initial
assembly only. See Connectamajig specification for
dimensions and details.
Caliper Connectamajig is located here. The hose
fitting feeds through the frame from front to back.
Specify caliper hose exit angle per hose angle
specification.
3
Hose inline Connectamajig is located here. The hose
fitting feeds through the frame from back to front.
4
Measure hose length from the hood bolt to the
caliper fitting. The hood bolt starts approximately
20 mm from the end of the hood, as shown.
5
Hose bend radius at 20° C = 30 mm minimum; Hose
diameter Ø 5.1 maximum.
6
Brake system and brake system Connectamajig are
not compatible with mineral based fluids such as
damping fluid, mineral oil, fork fluid, or RockShox
Reverb fluid.
Brakes
10 S
Disc Brake Mounting Bracket and Spacing Specification
25 S
25 S
10 S
RED/Force/Rival/S700
Use the chart to determine the bracket and/or spacer configuration
to mount your disc brake caliper to your frame/fork.
20 IS
30 IS
40 IS
0 Direct
20 S
20 P
30 P
40 P
16.8 mm
N/A
3S
10 S
20 P/30 P
3S
6 mm
40
40 PP
40 P
12.5 mm
20 P: N/A
32 mm
7.5 mm
20 P: N/A
40 P
IS
3S
46 mm
30 P
40
40PP
ISIS
20 P/30 P
20 P/30 P
N/A
37.5 mm
N/A
30 Post Bracket
N/A
40 P
IS
16.8 mm
40 P
40 P
40 P
IS
24 mm
IS
33SS
10 S
20 S
6 mm
20 S / 20 P
IS
IS
30 P
30 P
10 S
20 Post Spacer / 20 Post Bracket
30 P
IS
20 S
10SS
10
25 S
25 S
Direct
3S
20 S
20 S
IS
20 P/30 P
30 P
20 S
Direct
20 S
Direct
N/A
10 Post Spacer
37.5 mm
IS
20 S
Direct
Direct
25 S
10 S
30 P
25 S
20 S
Direct
20 S
20 S
Direct
Direct
10 S
30 P
25 S
Direct
20 S
10 S
Direct
25 S
Direct
24 mm
25 S
10 S
Direct
25 S
180 Post
10 S
10 S
Lower
Spacer
Direct Post Mount
20 P/30 P
Direct
20 S
20 P
10 S
10 S
20 IS
25 S
25 S
160 Post
16.8 mm
0 IS
Lower
Bolt
Direct
40 P
160 IS
Upper
Spacer
IS
0 IS
Upper
Bolt
30 P
180 mm
20 S
170 mm
Direct
160 mm
25 S
140 Post
140 mm
10 S
140 IS
Standard
25 S
Fork/Frame Mount
Rotor Size (mm)
16.8 mm
N/A
40 Post Bracket
40 P
IS
20 P/30 P
20 S
Direct
IS
16.8 mm
N/A
16.8 mm
N/A
40 P
IS
20 P/30 P
2016 Rev B
20 S
78 Direct
IS (0 IS, 20 IS, 30 IS, 40 IS)
Brakes
RED/Force/Rival
Flat Mount Caliper Front Frame Specification
Min 10 mm depth
M5x0.8-6H (2X)
Min 16 mm
Boss diameter
40° max dropout angle
Co-planar
mounting
surfaces
70 ±0.15
Bolt hole spacing
1.7±0.4
Dropout face
to hole pattern
centerline
23.5 ±0.15
11 ±0.15
Dropout to mounting face
79 2016 Rev B
See hub specification
for dropout face to rotor
mounting face dimension
Brakes
RED/Force/Rival
Flat Mount Caliper Rear Frame Specification
16 ±0.15
Min dropout angle 69°
Rear mount thickness
20, 25, or 30 ±0.5
5.2 ±0.1
Ø14 min
Boss diameter
See hub specification
for dropout face to rotor
mounting face dimension
3 +0.5
-1.0
(2X)
Slot width
80 2016 Rev B
34 ±0.15
Slot spacing
36.5 ±0.15
Rear slot centerline
to axle centerline
(2X) 2.05 ±0.4 Dropout face to
outboard most mounting location
Brakes
RED/Force/Rival/S700/BB7/BB5 Road
Spoke Clearance
180 mm ± 0.5
170 mm ± 0.5
160 mm ± 0.5
2
140 mm ± 0.5
1
19.12 Min
18.26 Min
Rotor Mounting Face
20.09 Min
Hub Axis
3
20.57 Min
21.05 Min
Notes
1
Caliper body will not extend beyond this datum. Datum accounts for caliper manufacturing tolerances
and variation in pad advancement
2
140 mm rotor dimensions apply only to rear wheel setups. All other dimensions apply to both front and
rear wheel setups.
3
Caliper position shown for 160 mm rotor.
81 2016 Rev B
Brakes
BB7/BB5 Road
Mechanical Disc Brakes Clearance
15°
22.20
14.23
11.5
4
47.91
26.26
2
82 2016 Rev B
Brakes
RED/Force/Rival/Apex/S700
Rim Brake Caliper
Dim B
360
Caliper Brake Pivot Location (Short Reach 39-49 mm)
352
-25
25
75
348
Max
355
360
355
344
Min
346
350
346
Dim A
Dim B
356
-25
0
25
Note: For maximum tire clearance, use the top 1/3 of the graph.
90°
Rear Rim Brake Caliper
Front Rim Brake Caliper
90°
75
Dim A
B
B
A
A
(-)
83 2016 Rev B
(+)
)+(
)-(
Brakes
RED/Force/Rival/Apex/S700
Rim Brake Caliper
39
49
29
Rear Brake Caliper
Front Brake Caliper
When designing a bicycle frame, consider these SRAM brake caliper dimensions
39
49
29
33
27
33
27
84 2016 Rev B
Brakes
Brake Specifications
Caliper and Lever Compatibility
Levers/Brakes
RED/Force/Rival/
Apex
Single Digit
Shorty
Shorty Ultimate
BB7 MTB & BB5
MTB
Speed Dial™
x
x
FR-5™
x
x
BB7 Road & BB5
Road
RED/Force/Rival/
Apex/S500/S900/
S700/Hydro R
x
x
x
x
Aero/ BL 700
x
x
x
x
Range of Speed Dial
FR-5
Speed Dial 7 & SL
Min Cable Pull
25 mm
25 mm
Leverage Ratio
2:1
2:1
Max Cable Pull
29 mm
32 mm
Leverage Ratio
2.75 : 1
2.75 : 1
Notes
Brake levers with a cable pull of more than 32 mm are compatible with Avid
Single Digit, BB7 MTB, and BB5 MTB mechanical disc brakes, but reduce brake
power.
Avid Single Digit, BB7 MTB, and BB5 MTB mechanical disc brakes are
compatible with virtually all side-pull specific brake levers. As with any side-pull
brake, it is recommended to use adjustable leverage brake levers when using
Single Digit, BB7 MTB, and BB5 MTB mechanical disc brakes.
85 2016 Rev B
Brakes
Single Digit
Link to Arm Dimension
The link must be a minimum of 38 mm from the inside edge of the cable arm
to prevent the link from contacting the cable anchor arm. If the link and arms
are too far apart, the top of the brake arm can extend too far from the frame
or fork and interfere with the rider's feet.
> 38 mm
Brake Pad Adjustment Slot
Single Digit Brakes
Min 21.25 mm
Max 35 mm
19 mm
38 mm
19 mm
86 2016 Rev B
Brakes
Single Digit
Cable Link / Noodle / Boot
WA R N I N G - C R A S H H A Z A R D
Roller-Type Noodles: Do not use roller-type noodles with Avid side-pull
brakes. Due to the radius of most roller-type noodles, and the diameter of
the brake cable, there is a safety concern.
•
The Avid cable link on all side-pull brakes is made of stainless steel and
is riveted onto the brake arm. It is specifically designed for use with the
Avid noodle.
•
The Avid noodle on Single Digit 7/SL is specifically designed to allow the
installation and removal from the link without removing the Overcoat
boot from the noodle tip.
•
The noodle is available in the following bends: 90, 110, and 135 degrees.
87 2016 Rev B
Overcoat Boot Installation
Brakes
Shorty Ultimate
Dual Mounted Brake Caliper
*For wheel rims wider than 23 mm (ex. Zipp 303 Cyclocross), consult the spare parts catalog on sram.com/service part numbers.
250 mm straddle wire
(recommended)
145 mm to top of
cable hanger
90° (recommended)
18-23 mm
rim width*
79-82 mm
brake boss spacing
88 2016 Rev B
Brakes
Shorty 6/Shorty 4
Cable Carrier and Straddle Cable Length
A (mm)
C
Lenth of straddle Opening angle
cable
of straddle cable
D (mm)
Designed width
of Shorty
H (mm)
Total height
h (mm)
Designed height
W (mm)
Total width
Pivot width
Opening
CCC
Type S
63
110°
92.94
51.61
63.21
39.65
CCC
Type A
73
95°
106.12
53.82
67.64
44.08
CCC
Type B
82
87°
56.45
72.89
49.33
CCC
Type D
93
90°
122.56
65.76
91.52
67.96
CCC
Type C
106
80°
138.00
68.14
96.27
72.71
31.78
116.28
56.80
W/2
18-23 mm
rim width
A
C/2
H
Opening
h
56.8
D
31.78
79- 82 mm
brake boss spacing
89 2016 Rev B
Brakes
Wheels
Zipp Wheels
Zipp Rim/Disc Design Parameters
Frame clearance 4 mm minimum per side
Rim/Disc
A (mm)
Max width
B (mm)
Depth
at max
width (A)
202 Firecrest CC
25.65
13.01
C (mm)
Max
depth
R1 (mm)
Radius to
center line
A
32.54
202 Tubular
22.86
303 Firecrest CC
8.23
B
19.45
28.25
303 Firecrest TU
46.60
19.08
404 Firecrest CC
26.78
26.06
404 Firecrest TU
27.32
25.13
808 Firecrest CC
26.78
50.05
808 Firecrest TU
27.17
49.77
900 TU Disc
21.28
NA
NA
Super-9 CC Disc
28.25
NA
NA
404 650C Firecrest CC
26.78
26.06
58.49
291.03
Super-9 TU Disc
28.25
NA
NA
317.54
30 Clincher
21.40
14.51
30.30
316.92
60 Clincher
22.69
27.24
57.44
316.29
404 Firestrike CC & TU
27.8
22.4
58.7
316.6
808 Firestrike CC & TU
28.5
18.9
82.5
316.5
58.75
316.62
C
81.82
91 2016 Rev B
R1
Center axis
of wheel
Wheels
Driver and Wheel Standard - Road
Stop surface min 50 mm ^2, rectangular to spline surface
Usable depth of thread min 4.5
See detail A
75
Dropout distance
10 sp: 40.6 +1
-0.3
11 sp: 42.4
±0.2
Detail A : scale 5 : 1
Installation space border
for drivetrain
Max recess 1
Transition start
max 0.5
Spoke clearance min. 7 at 75 mm
offset from wheel center
7
92 2016 Rev B
Wheels
Driver and Wheel Standard - Road
Continued
Detail B : scale 10 : 1
Max R1
See detail B
Max R0.3
Ø 38
Max R0.4
+4
-1
Max R0.3
93 2016 Rev B
Wheels
Rear Maxle™
Frame Specification
Hub OLD (mm)
A (mm)
Axle length
135
167
142
174
Maxle Ultimate
B (mm)
Thread length
C
Thread pitch
20
M12x1.75 - 6g
Lever in Closed Position
A
21.59
11.96
+0.7
-0.6
0
-0.07
2 C
Ø24
B
65.24
18 mm min
full thread
7.62
Lever in Open Position
30.77
Notes:
62.96
1
Drawing is not to scale.
2 Thread form per ISO-965
3 Customer is responsible for ensuring hub, frame,
and axle compatibilty.
4 Head translates along the Maxle axis approximately
1.46 mm when lever is moved from open to closed.
94 2016 Rev B
Wheels
Rear Maxle™
Frame Specification
Frame dropouts with axle installed
HUB OLD ±2
2
A
⌖
0.14Ⓜ
A
Chamfer
Ø24 min
Ø12.05
Ø24
C
+0.05
-0.02
Chamfer
16
A
A
95 2016 Rev B
Wheels
Front Maxle™
Fork Specification
Maxle Ultimate 15
Maxle Ultimate 12
Hub OLD (mm)
A (mm)
Axle length
100
125
B (mm)
Thread length
C
Thread pitch
D (mm)
Axle diameter
9
M15x1.5-6h
14.98
12
M12x1.5-6h
12.03
Lever in Closed Position
21.59
A
+0.7
-0.6
D
0
-0.07
2 C
Ø24
B max thread trace
65.24
7.62
Lever in Open Position
30.77
Notes:
62.96
1
Drawing is not to scale.
2 Thread form per ISO-965
3 Customer is responsible for ensuring hub, frame,
and axle compatibilty.
4 Head translates along the Maxle axis approximately
1.46 mm when lever is moved from open to closed.
96 2016 Rev B
Wheels
Front Maxle™
Fork Specification
Maxle Ultimate 15
Maxle Ultimate 12
Hub OLD (mm)
A (mm)
Axle length
100
125
B (mm)
Thread length
C
Thread pitch
D
Axle diameter
9
M15x1.5-6h
14.98
15
M12x1.5-6h
12.03
D
C
ØD±0.03
Ø24 min flat
surface and
thru axle head
clearance
ØD±0.03
B
15
100±2
10
D
97 2016 Rev B
Wheels
www.sram.com/service
GEN.0000000004873 Rev B
© 2015 SRAM LLC

BeachRacer (BB)

chargeBIKESカタログ ページ 車種名 場所 誤 正 更新日 4 プラグ 0

Product Status Report