PNEUMATIC www.allen -g r ELECTRICAL ou Group o.uk Allen p.c AGL FLUID POWER Limited DEVELOPMENTS Automotive Tubing Kunststoffrohr für Fahrzeuge Tubes automobiles PNEUMATIC DIN 73378 AGL (‘11’ series) d1 s r Allen extrude all their own tubing Allen extrudiert alle Kunststoffleitungen selbst Polyamide 12 and Polyamide 11 Polyamid 12 und Polyamid 11 Heat and light stabilised material Full range of sizes available DIN 73378 d1 (mm) s (mm) (mm) Allen extrude tous ses propres tubes Polyamide 12 et Polyamide 11 Material wärme- und lichtstabilisiert Matériau stabilisé à la chaleur et à la lumière Alle Abmessungen sind erhältlich Gamme complète de tailles disponible DIN 73378 DIN 73378 pc pb (Bar) (Bar) Black Schwarz Noir Blue Blau Bleu Natural Natur Beige Red Rot Rouge Yellow Gelb Jaune 4 x 1,00 20 44 132 01104.0240 01104.0230 01104.0270 01104.0210 01104.0220 6 x 1,00 30 27 80 01106.0440 01106.0430 01106.0470 01106.0410 01106.0420 8 x 1,00 40 19 57 01108.0640 01108.0630 01108.0670 01108.0610 01108.0620 8 x 1,50 40 31 93 01108.0540 01108.0530 01108.0570 01108.0510 01108.0520 10 x 1,00 60 15 45 01110.0840 01110.0830 01110.0870 01110.0810 01110.0820 10 x 1,25 60 19 57 01110.7540 01110.7530 01110.7570 01110.7510 01110.7520 12 x 1,50 60 19 57 01112.0940 01112.0930 01112.0970 01112.0910 01112.0920 15 x 1,50 90 15 44 01115.1240 01115.1230 01115.1270 01115.1210 01115.1220 16 x 2,00 95 19 57 01116.1240 01116.1230 01115.1270 01116.1210 01116.1220 18 x 2,00 100 17 51 01118.1440 01118.1430 01118.1470 01118.1410 01118.1420 Minimum bend radius (230C) Mindest-Biegeradius (230C) Rayon de courbure minimum (230C) pc = Operating pressure (230C) pb = Burst pressure (230C) pc = Arbeitsdruck (230C) pb = Berstdruck (230C) pc = pression de fonctionnement (230C) pb = pression d’éclatement (230C) ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED The above part numbers are for PA12 tubing. For PA11 tubing, please consult our Customer Services Department. Die oben genannten Teilenummern sind für PA12Schläuche. Les références ci-dessus concernent les tubes PA12. 1 Automotive Tubing Kunststoffrohr für Fahrzeuge Tubes automobiles PNEUMATIC DIN 74324 AGL (‘12’ and ‘18’ series) d1 s r Allen extrude all their own tubing Polyamide 12 and Polyamide 11 Heat and light stabilised material Full range of sizes available DIN 74324 DIN 73378 Allen extrudiert alle Kunststoffleitungen selbst Allen extrude tous ses propres tubes Polyamid 12 und Polyamid 11 Material wärme- und lichtstabilisiert Matériau stabilisé à la chaleur et à la lumière Alle Abmessungen sind erhältlich Gamme complète de tailles disponible DIN 74324 DIN 74324 DIN 73378 Polyamide 12 et Polyamide 11 PA12-PHL d1 (mm) s (mm) (mm) DIN 73378 PA12-PHLY High Pressure Hochdruck Haute pression (Bar) pb (Bar) Black Schwarz Noir (Bar) (Bar) pc pc pb 4 x 1,00 20 45 133 01204.0240 60 180 01804.0240 6 x 1,00 30 27 80 01206.0440 36 108 01806.0440 8 x 1,00 40 19 57 01208.0640 26 78 01808.0640 9 x 1,50 45 27 81 01209.0640 36 108 01809.0640 10 x 1,00 60 15 45 01210.0840 20 60 01810.0840 10 x 1,25 60 19 57 01210.7540 26 78 01810.7540 11 x 1,50 60 21 63 01211.0840 28 84 01811.0840 12 x 1,50 60 19 57 01212.0940 26 78 01812.0940 14 x 2,00 75 22 66 01214.1040 30 90 01814.1040 15 x 1,50 90 15 44 01215.1240 20 60 01815.1240 16 x 2,00 95 19 57 01216.1240 26 78 01816.1240 18 x 2,00 100 17 51 01218.1440 23 69 01818.1440 Minimum bend radius (230C) Mindest-Biegeradius (230C) Rayon de courbure minimum (230C) pc = Operating pressure (230C) pb = Burst pressure (230C) pc = Arbeitsdruck (230C) pb = Berstdruck (230C) pc = pression de fonctionnement (230C) pb = pression d’éclatement (230C) ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED The above part numbers are for PA12 tubing. For PA11 tubing, please consult our Customer Services Department. Die oben genannten Teilenummern sind für PA12Schläuche. Für PA11-Schläuche setzen Sie sich bitte mit unserer Kundendienstabteilung in Verbindung. Les références ci-dessus concernent les tubes PA12. Pour les tubes PA11, veuillez contacter notre service après-vente. 2 Automotive Tubing Kunststoffrohr für Fahrzeuge Tubes automobiles PNEUMATIC AGL Tubing Schläuche / Tubes Tubing supplied on ‘self-supporting’ coils Schläuche auf ‘selbsttragenden’ Wendeln Tubes fournis sur flexibles “autonomes” With the most modern machinery of its type, Allen Industrial is able to provide the most popular sizes of tubing on ‘self-supporting’ coils. The tubing is extruded and coiled on one machine, and then ‘strapped’ automatically, ready for despatch. d1 (mm) Mit den modernsten Maschinen dieser Art ist Allen Industrial in der Lage, die gängigsten Schlauchgrößen auf ‘selbsttragenden’ Wendeln zu liefern. Die Schläuche werden auf einer Maschine stranggepresst und gerollt und dann automatisch versandfertig verpackt. DIN 73378 DIN 74324 ISO 7628 Equipée de machines à la pointe du progrès, Allen Industrial peut offrir les tubes aux cotes les plus demandées sur flexibles autonomes. Les tubes sont extrudés et enroulés sur une même machine, puis automatiquement “attachés”, prêts à l’expédition. Length / Length / Length * s (mm) 4 x 1,00 2,000 6 x 1,00 1,300 8 x 1,00 850 10 x 1,25 550 12 x 1,50 400 16 x 2,00 200 18 x 2,00 200 Not specified in this DIN/ISO standard In diesem DIN/ISO-Standard nicht spezifiziert Non disponible dans cette norme DIN/ISO ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED * Each coil weighs approximately 20kg Jede Wendel wiegt ungefähr 20kg Chaque flexible pèse environ 20kg 3 Air Brake Coils Luftbremswendel Flexibles pour freins pneumatiques PNEUMATIC Eurocoil AGL (‘21’ series) 12 x 1,5mm 90mm 100mm A TÜV Approved TÜV-geprüft Homologation TUV Certificate No. TÜV EMA-7.970185378 Zertifikat Nr. TÜV EMA-7.970185378 Certificat nº TÜV EMA-7.970185378 All Allen Air Brake Coils with plastic colour coded tail supports have been tested by TÜV to meet the safety-critical parameters of DIN74323 – the recognised standard for Air Brake Coils Alle Allen-Druckluftwendeln mit farbgekennzeichnetem Knickschutz aus Plastik sind TÜV-geprüft, um den anspruchsvollen Sicherheitsparametern von DIN 74323 zu entsprechen – dem anerkannten Standard für Druckluftwendeln. Tous les flexibles Allen pour freins pneumatiques à manchettes souples en plastique à code couleur ont été approuvés par le TUV, selon les paramètres de sécurité critiques de la norme DIN 74323 - norme officielle des flexibles pour freins pneumatiques. Steel compression fittings manufactured to highest international standards Moulded colour-coded anti-kink tail supports Fixations de compression en acier fabriquées selon les normes internationales les plus strictes. Geformter Anti-Knickschutz mit Farbkennzeichnung Supplied with unique stowage loop as standard 20-turn black coils to DIN74323. Other black coils printed DIN74324. Coloured coils printed DIN73378 Tested to 10,000 articulations (to ISO 7375) Nach den höchsten internationalen Standards produzierte Stahlrohrverschraubung Manchettes souples anti-déformation moulées à code couleur Standardmäßig mit einzigartiger Halterungsschlinge ausgestattet Livré avec boucle de rangement unique en série 20-fach gewundene schwarze Wendeln nach DIN 74323. Andere schwarze Wendeln gedruckt DIN 74324. Farbige Wendeln gedruckt DIN 73378 Getestet mit 10.000 Biegungen (nach ISO 7375) Flexibles noirs à 20 spires selon DIN 74323. Autres flexibles noirs imprimés selon DIN 74324. Flexibles de couleur imprimés selon DIN 73378. Approuvé sur 10.000 articulations (selon ISO 7375) A 2x M16 x 1,5 A 2x M22 x 1,5 A 2x R 1/2" 3,0m 02116.0241 02116.0242 02116.0214 02116.0224 02116.0141 02116.0142 02116.0114 02116.0124 02116.0341 02116.0342 02116.0314 02116.0324 18 3,5m 02118.0241 02118.0242 02118.0214 02118.0224 02118.0141 02118.0142 02118.0114 02218.0124 02118.0341 02118.0342 02118.0314 02118.0324 20 4,0m 02120.0241 02120.0242 02120.0214 02120.0224 02120.0141 02120.0142 02120.0114 02120.0124 02120.0341 02120.0342 02120.0314 02120.0324 22 4,5m 02122.0241 02122.0242 02122.0214 02122.0224 02122.0141 02122.0142 02122.0114 02122.0124 02122.0341 02122.0342 02122.0314 02122.0324 No. of Turns Windungszahl Nº de spires Working Length Arbeitslänge Longueur de travail 16 Tube Colour Wendelfarbe Couleur du tube Anti-kink Colour Knickschutzfarbe Couleur anti-déformation ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED 4 Air Brake Coils Luftbremswendel Flexibles pour freins pneumatiques PNEUMATIC Push-In AGL (‘22’ series) 12 x 1,5mm 90mm 100mm A B TÜV Approved TÜV-geprüft Homologation TUV Certificate No. TÜV EMA-7.970185378 Zertifikat Nr. TÜV EMA-7.970185378 Certificat nº TÜV EMA-7.970185378 All Allen Air Brake Coils with plastic colour coded tail supports have been tested by TÜV to meet the safety-critical parameters of DIN74323 – the recognised standard for Air Brake Coils Alle Allen-Druckluftwendeln mit farbgekennzeichnetem Knickschutz aus Plastik sind TÜV-geprüft, um den anspruchsvollen Sicherheitsparametern von DIN 74323 zu entsprechen – dem anerkannten Standard für Druckluftwendeln. Tous les flexibles Allen pour freins pneumatiques à manchettes souples en plastique à code couleur ont été approuvés par le TUV, selon les paramètres de sécurité critiques de la norme DIN 74323 - norme officielle des flexibles pour freins pneumatiques. One-piece push-in steel fittings manufactured to highest international standards Moulded colour-coded anti-kink tail supports Supplied with unique stowage loop as standard 20-turn black coils to DIN74323. Other black coils printed DIN74324. Coloured coils printed DIN73378 Tested to 10,000 articulations (to ISO 7375) Nach den höchsten internationalen Standards produzierte Stahlrohrverschraubung zum Einschieben in einem Stück. Fixations de compression monobloc en acier à enfoncer, fabriquées selon les normes internationales les plus strictes. Geformter Anti-Knickschutz mit Farbkennzeichnung Manchettes souples anti-déformation moulées à code couleur Standardmäßig mit einzigartiger Halterungsschlinge ausgestattet Livré avec boucle de rangement unique en série 20-fach gewundene schwarze Wendeln nach DIN 74323. Andere schwarze Wendeln gedruckt DIN 74324. Farbige Wendeln gedruckt DIN 73378 Flexibles noirs à 20 spires selon DIN 74323. Autres flexibles noirs imprimés selon DIN 74324. Flexibles de couleur imprimés selon DIN 73378. Getestet mit 10.000 Biegungen (nach ISO 7375) Approuvé sur 10.000 articulations (selon ISO 7375) A 2x M16 x 1,5 A 2x M22 x 1,5 A 2x 1/2" BSPT A–B M16x1.5 – M18x1.5 3,0m 02216.0241 02216.0242 02216.0214 02216.0224 02216.0141 02216.0142 02216.0114 02216.0124 02216.0341 02216.0342 02216.0314 02216.0324 02216.0641 02216.0642 02216.0614 02216.0624 18 3,5m 02218.0241 02218.0242 02218.0214 02218.0224 02218.0141 02218.0142 02218.0114 02218.0124 02218.0341 02218.0342 02218.0314 02218.0324 02218.0641 02218.0642 02218.0614 02218.0624 20 4,0m 02220.0241 02220.0242 02220.0214 02220.0224 02220.0141 02220.0142 02220.0114 02220.0124 02220.0341 02220.0342 02220.0314 02220.0324 02220.0641 02220.0642 02220.0614 02220.0624 22 4,5m 02222.0241 02222.0242 02222.0214 02222.0224 02222.0141 02222.0142 02222.0114 02222.0124 02222.0341 02222.0342 02222.0314 02222.0324 02222.0641 02222.0642 02222.0614 02222.0624 No. of Turns Windungszahl Nº de spires Working Length Arbeitslänge Longueur de travail 16 Tube Colour Wendelfarbe Couleur du tube Anti-kink Colour Knickschutzfarbe Couleur anti-déformation ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED 5 Air Brake Coils Luftbremswendel Flexibles pour freins pneumatiques PNEUMATIC AGL Unicoil (‘23’ series) 12 x 1,5mm 90mm 100mm A = M18 x 1.5p A* TÜV Approved TÜV-geprüft Homologation TUV Certificate No. TÜV EMA-7.970185378 Zertifikat Nr. TÜV EMA-7.970185378 Certificat nº TÜV EMA-7.970185378 All Allen Air Brake Coils with plastic colour coded tail supports have been tested by TÜV to meet the safety-critical parameters of DIN74323 – the recognised standard for Air Brake Coils Alle Allen-Druckluftwendeln mit farbgekennzeichnetem Knickschutz aus Plastik sind TÜV-geprüft, um den anspruchsvollen Sicherheitsparametern von DIN 74323 zu entsprechen – dem anerkannten Standard für Druckluftwendeln. Tous les flexibles Allen pour freins pneumatiques à manchettes souples en plastique à code couleur ont été approuvés par le TUV, selon les paramètres de sécurité critiques de la norme DIN 74323 - norme officielle des flexibles pour freins pneumatiques. M18 (female thread) ‘swivel nut’ push-in fittings, to receive thread adapter M18 (Innengewinde) Verbindungsstücke zum Einschieben mit ‘Drehmutter’, um den Gewindeadapter zu erreichen Moulded colour-coded anti-kink tail supports Supplied with unique stowage loop as standard Fixations à enfoncer à écrou pivotant M18 (filet femelle) pour adaptateur de filet. Manchettes souples anti-déformation moulées à code couleur Geformter Anti-Knickschutz mit Farbkennzeichnung 20-turn black coils to DIN74323. Other black coils printed DIN74324. Coloured coils printed DIN73378 Livré avec boucle de rangement unique en série Standardmäßig mit einzigartiger Halterungsschlinge ausgestattet Flexibles noirs à 20 spires selon DIN 74323. Autres flexibles noirs imprimés selon DIN 74324. Flexibles de couleur imprimés selon DIN 73378. 20-fach gewundene schwarze Wendeln nach DIN 74323. Andere schwarze Wendeln gedruckt DIN 74324. Farbige Wendeln gedruckt DIN 73378 Tested to 10,000 articulations (to ISO 7375) Approuvé sur 10.000 articulations (selon ISO 7375) Getestet mit 10.000 Biegungen (nach ISO 7375) Working Length Arbeitslänge Longueur de travail 16 3,0m 18 20 22 3,5m 4,0m 4,5m Tube Colour Wendelfarbe Couleur du tube Anti-kink Colour Knickschutzfarbe Couleur anti-déformation A 2x M18 x 1,5 * 02316.1841 02316.1842 02316.1814 02316.1824 Thread Adapter Gewindeendstück / Raccord de filetage M18 x 1,5 No. of Turns Windungszahl Nº de spires B 02318.1841 02318.1842 02318.1814 02318.1824 02320.1841 02320.1842 02320.1814 02320.1824 02322.1841 02322.1842 02322.1814 02322.1824 * Female thread / Innengewinde / Filetage femelle ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED M16 x 1,5mm 14000.0200 M22 x 1,5mm 14000.0100 R1/2” 14000.0300 1/2” NPTF 14000.0800 1/4” NPTF 14000.0400 Alternative adapters available on request Alternativ-Endstücke auf Anfrage erhältlich Autres raccords disponibles sur demande M16 x 1,5mm 34mm long 14000.2600 M18 x 1,5mm 34mm long 14000.7000 6 Air Brake Coils Luftbremswendel Flexibles pour freins pneumatiques PNEUMATIC AGL Combination Coil Combination Coil / Combination Coil 12 x 1,5mm 100mm 90mm 100mm M16 x 1.5 or M22 x 1.5 M18 x 1.5p TÜV Approved TÜV-geprüft Homologation TUV Certificate No. TÜV EMA-7.970185378 Zertifikat Nr. TÜV EMA-7.970185378 Certificat nº TÜV EMA-7.970185378 All Allen Air Brake Coils with plastic colour coded tail supports have been tested by TÜV to meet the safety-critical parameters of DIN74323 – the recognised standard for Air Brake Coils. Alle Allen-Druckluftwendeln mit farbgekennzeichnetem Knickschutz aus Plastik sind TÜV-geprüft, um den anspruchsvollen Sicherheitsparametern von DIN 74323 zu entsprechen – dem anerkannten Standard für Druckluftwendeln. Tous les flexibles Allen pour freins pneumatiques à manchettes souples en plastique à code couleur ont été approuvés par le TUV, selon les paramètres de sécurité critiques de la norme DIN 74323 - norme officielle des flexibles pour freins pneumatiques. M18 (female thread) ‘swivel nut’ push-in fitting to receive thread adapter and onepiece push-in steel fitting M18 (Innengewinde) Verbindungsstücke zum Einschieben mit ‘Drehmutter’, um den Gewindeadapter zu erreichen plus einteilige Stahlrohrverschraubung Moulded colour-coded anti-kink tail supports Supplied with unique stowage loop as standard Manchettes souples anti-déformation moulées à code couleur Geformter Anti-Knickschutz mit Farbkennzeichnung 20-turn black coils to DIN74323. Other black coils printed DIN74324. Coloured coils printed DIN73378 Livré avec boucle de rangement unique en série Standardmäßig mit einzigartiger Halterungsschlinge ausgestattet 20-fach gewundene schwarze Wendeln nach DIN 74323. Andere schwarze Wendeln gedruckt DIN 74324. Farbige Wendeln gedruckt DIN 73378 Tested to 10,000 articulations (to ISO 7375) Getestet mit 10.000 Biegungen (nach ISO 7375) No. of Turns Windungszahl Nº de spires Working Length Arbeitslänge Longueur de travail 16 20 Tube Colour Wendelfarbe Couleur du tube Anti-kink Colour Knickschutzfarbe Couleur anti-déformation Fixations à enfoncer à écrou pivotant M18 (filet femelle) pour adaptateur de filet et fixation monobloc Flexibles noirs à 20 spires selon DIN 74323. Autres flexibles noirs imprimés selon DIN 74324. Flexibles de couleur imprimés selon DIN 73378 Approuvé sur 10.000 articulations (selon ISO 7375) M18 x 1,5 Female – M16 x 1,5 Male M18 x 1,5 Female – M22 x 1,5 Male 3,0m 02316.1441 02316.1442 02316.2041 02316.2042 4,0m 02320.1441 02320.1442 02320.2041 02320.2042 ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED 7 Air Coils Luftbremswendel Flexibles pour freins pneumatiques PNEUMATIC Compact Coils AGL (‘523’ series) 12 x 2mm 40mm 115mm A = M18 x 1.5p A* 40mm inner diameter 40mm Innendurchmesser 40mm diamétre intérieur High flexibility and high in strength Flexibel und Leistungsstark Fléxible et robuste Meets the performance specifications of DIN 74323 Hat die Leistung von DIN 74323 M18 (Innengewinde) Verbindungsstücke zum Einschieben mit ‘Drehmutter’, um den Gewindeadapter zu erreichen Moulded colour-coded anti-kink tail supports Geformter Anti-Knickschutz mit Farbkennzeichnung Supplied with unique stowage loop as standard Standardmäßig mit einzigartiger Halterungsschlinge ausgestattet Tested to 10,000 articulations (to ISO 7375) Getestet mit 10.000 Biegungen (nach ISO 7375) No. of Turns Windungszahl Nº de spires Working Length Arbeitslänge Longueur de travail 23 3,0m Tube Colour Wendelfarbe Couleur du tube Anti-kink Colour Knickschutzfarbe Couleur anti-déformation A 2x M18 x 1,5 * 52323.1841 52323.1842 52323.1814 Manchettes souples anti-déformation moulées à code couleur Livré avec boucle de rangement unique en série Approuvé sur 10.000 articulations (selon ISO 7375) Thread Adapter Gewindeendstück / Raccord de filetage M18 x 1,5 M18 (female thread) ‘swivel nut’ push-in fittings, to receive thread adapter Fonctions techniques selon DIN 74323 Fixations à enfoncer à écrou pivotant M18 (filet femelle) pour adaptateur de filet. B 52323.1824 27 3,5m 1/2” NPTF 14000.0800 52327.1814 52327.1824 4,0m 1/4” NPTF 14000.0400 52332.1841 52332.1842 52332.1814 52332.1824 * Female thread / Innengewinde / Filetage femelle ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED M22 x 1,5mm 14000.0100 R1/2” 14000.0300 52327.1841 52327.1842 32 M16 x 1,5mm 14000.0200 Alternative adapters available on request Alternativ-Endstücke auf Anfrage erhältlich Autres raccords disponibles sur demande M16 x 1,5mm 34mm long 14000.2600 M18 x 1,5mm 34mm long 14000.7000 8 Air Brake Coils Luftbremswendel Flexibles pour freins pneumatiques PNEUMATIC AGL Metal Springs Metallfedern / Ressorts métalliques These coils are not covered by our TÜV approval, but are well proven, high quality products. Diese Wendeln unterliegen nicht unserer TÜV-Prüfung, sind aber bestens bewährte, hochwertige Produkte. Polyamide 12 tubing Polyamid-12-Schläuche Heat and light stabilised material Hitze- und lichtbeständiges Material Steel compression or push-in fittings Stahlrohrverschraubung zum Einschieben in einem Stück Optional colour-coded tailpiece retains the anti-kink spring 20-turn black coloured coils to DIN74323, other black coils to DIN74324 Coloured coils to DIN73378 For end fitting options, refer to page 7, and for part numbers etc., consult our Customer Services Department. Ces flexibles n’ont pas reçu notre homologation TUV mais sont des produits de qualité supérieure largement éprouvés. Tubes en polyamide 12 Matière stable à la chaleur et la lumière Fixations de compression en acier à enfoncer Optionales farbgekennzeichnetes Zusatzstück hält die Knickschutz-Feder zurück L’embout optionnel à code couleur retient le ressort anti-déformation 20-fach gewundene schwarze Wendeln nach DIN 74323, andere schwarze Wendeln nach DIN74324 Flexibles noirs à 20 spires selon DIN 74323 ; autres flexibles noirs selon DIN 74324 Farbige Wendeln nach DIN 73378 Flexibles de couleur selon DIN 73378 Endverbindungsstücke siehe Seite 7, bezüglich Teilenummern wenden Sie sich bitte an unsere Kundendienstabteilung. Pour les options de raccords, voir page 7. Pour les références etc., consultez notre service après-vente. Special Applications Spezielle Anwendungen / Applications spéciales Allen Industrial prides itself on providing high quality components for original equipment manufacturers and aftermarket outlets worldwide. With our experience, we are able to manufacture coil assemblies and a wide range of non-standard coils for special applications. A few examples: Allen Industrial ist stolz darauf, hochwertige Komponenten an Originalgerätehersteller und sekundäre Absatzmärkte weltweit zu liefern. Mit unserer Erfahrung sind wir in der Lage, Wendelbauteile und eine große Auswahl von nicht-standardmäßigen Wendeln für spezielle Anwendungen herzustellen. Ein paar Beispiele: Allen Industriel est fière des composants de qualité supérieure qu’elle fournit aux fabricants d’équipement d’origine et aux revendeurs du monde entier. Grâce à notre expérience, nous sommes capables de fabriquer des ensembles de flexibles et une vaste gamme de flexibles hors série pour applications spéciales. Quelques exemples: 130mm SP1 SP4 Coils for extendable ‘trombone type’ trailers Wendeln für ausziehbare ‘posaunenartige’ Anhänger Flexibles pour remorques de type “trombone” extensible Long or short coils Lange oder kurze Wendeln Flexibles longs ou courts ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED 9 Air Brake Coils Luftbremswendel Flexibles pour freins pneumatiques PNEUMATIC AGL Air Brake Coil Handle Verlängerungsmuffe / Poignée pour flexible The Allen Air Brake Coil Handle is designed to reduce the risk of damaging/kinking coils when connecting palm couplings Der Allen Verlängerungsmuffe wurde konstruiert, um die Gefahr der Beschädigung bzw. des Knickens von Wendeln beim Anschluss von Kupplungsköpfen zu mindern. La poignée pour flexible Allen est conçue pour empêcher les risques d’endommagement / formation de coudes lors du raccordement de dispositifs d’accouplement à poignée. Manufactured from tough, robust materials Aus zähen, robusten Werkstoffen hergestellt Makes connections of palm couplings easier Macht das Anschließen von Kupplungsköpfen einfacher Fabriquée avec des matériaux solides et résistants Ergonomically designed for firm grip Simplifie le raccordement de dispositifs d’accouplement à poignée. Ergonomisch konstruiert für festen Halt Provides added support for end of coil Sa forme ergonomique renforce la préhension Zusätzliche Abstützung des Wendelendes Fits over metal or plastic type tail support springs Passt über Metall- oder KunststoffAbstützfedern Quick and easy to assemble Elle renforce le soutien du bout du serpentin Elle s’emmanche sur des ressorts de soutien d’embout de type métallique ou en matière plastique Schnelle und einfache Montage Colour coded Farblich gekennzeichnet Integral stowage loop Integrale Halterungsschlinge Supplied in sets of two (1 red & 1 yellow) Montage rapide et simplifié In Zweiersets (1 rot & 1 gelb) geliefert Codage couleur Boucle de lovage incorporée Fournies par jeux de deux poignées (1 rouge et 1 jaune) Air Brake Coil Handle 1 x Red & 1 x Yellow Luftbremswendelgriff 14000.3212 1 x rot & 1 x gelb 14000.3212 Poignée pour flexible en serpentin de frein pneumatique 1 rouge et 1 jaune 14000.3212 Air Brake Coil Fittings Druckluftwendelverbindungsstücke / Raccords de flexibles pour freins pneu Coil type / Wendeltyp / Type de flexible Eurocoil / Unicoil M18 x 1,5mm Push-In B B Fitting type (B) M16 x 1,5mm 14000.0200 Available* M16 x 1,5mm - 34mm long 14000.2600 Available* M18 x 1,5mm - 34mm long 14000.7000 Available* Available* M22 x 1,5mm 14000.0100 1/2” BSP 14000.0300 Available* 1/2” NPTF 14000.0800 Not available 1/4” NPTF 14000.0400 Not available Allen Industrial will be pleased to assemble any combination of the above to any Air Brake Coil Allen Industrial montiert gerne jede Kombination der oben genannten Produkte an jede Druckluftwendel ALLEN PNEUMATIC IS A DIVISION OF ALLEN GROUP LIMITED * Push-In coil fittings are not sold separately, as fitting to the coil requires special equipment Die Wendelverbindungsstücke zum Einschieben werden nicht separat verkauft, da das Anpassen an die Wendeln eine Spezialausrüstung erfordert Les raccords de flexible à enfoncer ne sont pas vendus séparément puisque leur assemblage sur le flexible exige un équipement spécial. Allen Industrial se chargera d’assembler les éléments ci-dessus à un flexible quelconque pour freins pneumatiques. 10 Electrical Coils Elektrowendel Flexibles électriques ELECTRICAL 3-Core AGL (‘301’ series) 3-adrig / à 3 conducteurs Exceptional recoil properties 19mm Application: Tail lift control unit 300mm Not suitable for tail lift power supply Außergewöhnliche Rückstellfaktoren Anwendung: Steuereinheit für Hubladeklappe Nicht geeignet für Stromversorgung der Hubladeklappe 3 x 1,0mm2 Working Length No. of Turns Arbeitslänge Windungszahl Longueur de travail Nº de spires (x2) Propriétés exceptionnelles de rappel 2,5m 34 30139.3540 30139.0040 3,0m 43 30149.3540 30149.0040 3,5m 54 30160.3540 30160.0040 Application: unité de commande de trappe de chargement Ne convient pas pour l’alimentation de trappe de chargement 3-Core (‘313’ series) 3-adrig / à 3 conducteurs Exceptional recoil properties 35mm Application: Tail lift power 300mm Plug current rating: 25 amps continuous 45 amps intermittent Außergewöhnliche Rückstellfaktoren 3 x 6,0mm Anwendung: Strom für Hubladeklappe 2 Working Length No. of Turns Arbeitslänge Windungszahl Longueur de travail Nº de spires 3,0m 22 Nennstromleistung des Steckers: 25 A Gleichstrom 45 A pulsierender Strom (x2) 31325.3540 31325.0040 Propriétés exceptionnelles de rappel Alimentation de trappe de chargement Courant nominal de la fiche: 25 A c.c., 45 A c.a. ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 11 Electrical Coils Elektrowendel Flexibles électriques ELECTRICAL 4-Core AGL (‘308’ series) 4-adrig / à 4 conducteurs Flexilec sheath (black) Excellent recoil properties Application: Tail lift control unit L2 Flexilec-Ummantelung (schwarz) L1 Außergewöhnliche Rückstellfaktoren Anwendung: Steuereinheit für Hubladeklappe 4 x 1,0mm2 Gaine Flexilec (noire) Working Length No. of Turns Arbeitslänge Windungszahl Longueur de travail Nº de spires L1 L2 Propriétés exceptionnelles de rappel 3,5m 40 0,3m 0,3m 30844.0040 4,0m 55 0,3m 0,3m 30860.0040 5,0m 71 0,3m 2,0m 30876.0040 Application: unité de commande de trappe de chargement 5-Core (‘307’ series) 5-adrig / à 5 conducteurs Polyurethane sheath (black) Excellent recoil properties Application: Tail lift control unit L2 L1 Polyurethan-Ummantelung (schwarz) Außergewöhnliche Rückstellfaktoren Anwendung: Steuereinheit für Hubladeklappe 5 x 1,0mm2 Working Length No. of Turns Arbeitslänge Windungszahl Longueur de travail Nº de spires L1 L2 Gaine en polyuréthanne (noire) 3,5m 43 0,3m 0,3m 30748.0040 4,0m 55 0,3m 0,3m 30759.0040 6,0m 66 0,2m 2,0m 30770.0040 ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED Propriétés exceptionnelles de rappel Application: unité de commande de trappe de chargement 12 Electrical Coils Elektrowendel Flexibles électriques ELECTRICAL 7-core AGL (‘320’ series) 7-adrig / à 7 conducteurs 22mm 22mm Type ‘N’ Type ‘S’ Type ‘N’ Type ‘S’ Exceptional recoil properties Außerordentliche Rückstoßeigenschaften Propriétés exceptionnelles de rappel Sheath is extremely durable with excellent chemical resistance Der Aussenmantel ist extrem haltbar und hat ausgezeichnete chemische Wiederstandsfähigkeit La gaine est extrêmement durable et présente une excellente résistance aux agents chimiques Schwarze äußere Ummantelung Gaine extérieure de couleur noire Hitze- und lichtbeständiges Material Matière stabilisée à la chaleur et à la lumière Black coloured outer sheath Heat and light stabilised material Colour coded ISO connectors (black for ‘N’ type, green for ‘S’ type) ISO 1185 ISO 3731 ISO 6722 Farbgekennzeichnete ISOAnschlussstücke (schwarz for ‘N’-Typ, grün für ‘S’-Typ) Raccords ISO à code couleur (noir pour type en N, vert pour type en S) ISO 1185 ISO 3731 ISO 6722 ISO 1185 ISO 3731 ISO 6722 24 Volt 6 x 1,0, 1 x 1,5mm2 Working Length Arbeitslänge Longueur de travail ISO 1185 ‘N’ ISO 3731 ‘S’ ISO 1185 ‘N’ ISO 3731 ‘S’ ISO 1185 ‘N’ ISO 3731 ‘S’ 3,0m 32041.8044 32041.8144 32041.0540 32041.0640 32041.1444 32041.4746 3,5m 32047.8044 32047.8144 32047.0540 32047.0640 32047.1444 32047.4746 4,0m 32057.8044 32057.8144 32057.0540 32057.0640 32057.1444 32057.4746 4,5m 32064.8044 32064.8144 32064.0540 32064.0640 32064.1444 32064.4746 (x2) (x2) (x2) ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 13 Electrical Coils Elektrowendel Flexibles électriques ELECTRICAL Nylon AGL (‘41’ series) 7-core / 7-adrig / à 7 conducteurs 200mm 70mm Type ‘N’ Type ‘S’ Type ‘N’ Type ‘S’ Type ‘N’ Type ‘S’ 200mm 70mm 200mm 70mm ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 14 Electrical Coils Elektrowendel Flexibles électriques ELECTRICAL AGL Nylon (‘41’ series) 7-core / 7-adrig / à 7 conducteurs Latest ‘Thin Wall’ cable technology Light weight Improved performance characteristics Heat and light stabilised material La toute dernière technologie des câbles à paroi mince Weniger Gewicht Léger Verbesserte Leistungsmerkmale Caractéristiques de performance améliorées Wärme-und lichtstabilisierter Werkstoff Black coloured outer sheath ISO Connectors (black for ‘N’ type, green for ‘S’ type) ISO 1185 ISO 3731 Neueste Technologie bei “dünnwandigen” Kabeln ISO 4141 ISO 6722 Schwarzer Außenmantel ISO-Steckverbinder ISO 1185 ISO 3731 ISO 4141 ISO 6722 Matériau stable à la chaleur et à la lumière Gaine extérieure de couleur noire Connecteurs ISO ISO 1185 ISO 3731 ISO 4141 ISO 6722 24 Volt (x2) 6 x 1,0, 1 x 1,5mm2 Working Length Arbeitslänge Longueur de travail No. of Turns Windungszahl Nº de spires ISO 1185 Type ‘N’ Connectors 3,0m 16 04116.8044 ISO 3731 Type ‘S’ Connectors 04116.8146 04116.8166 3,5m 18 04118.8044 04118.8146 04118.8166 4,0m 20 04120.8044 04120.8146 04120.8166 4,5m 22 04122.8044 04122.8146 04122.8166 24 Volt (x2) 6 x 1,0, 1 x 1,5mm2 Working Length Arbeitslänge Longueur de travail No. of Turns Windungszahl Nº de spires ISO 1185 Type ‘N’ Connectors ISO 3731 Type ‘S’ Connectors 3,0m 16 04116.1444 04116.4746 04116.4766 3,5m 18 04118.1444 04118.4746 04118.4766 4,0m 20 04120.1444 04120.4746 04120.4766 4,5m 22 04122.1444 04122.4746 04122.4766 24 Volt (x2) 6 x 1,0, 1 x 1,5mm2 Working Length Arbeitslänge Longueur de travail No. of Turns Windungszahl Nº de spires ISO 1185 Type ‘N’ Connectors ISO 3731 Type ‘S’ Connectors 3,0m 16 04116.0549 04116.0649 04116.0669 3,5m 18 04118.0549 04118.0649 04118.0669 4,0m 20 04120.0549 04120.0649 04120.0669 4,5m 22 04122.0549 04122.0649 04122.0669 ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 15 Electrical Coils Elektrowendel Flexibles électriques ELECTRICAL ISO 4141 AGL (‘44’ and ‘45’ series) 7-core / 7-adrig / à 7 conducteurs 230mm 50mm Type ‘N’ Type ‘S’ Type ‘N’ Type ‘S’ 230mm 50mm Latest ‘Thin Wall’ cable technology Improved performance characteristics Heat and light stabilised material Neueste Technologie bei “dünnwandigen” Kabeln La toute dernière technologie des câbles à paroi mince Verbesserte Leistungsmerkmale Caractéristiques de performance améliorées Black coloured outer sheath Wärme-und lichtstabilisierter Werkstoff Colour coded ISO connectors (black for ‘N’ type, green for ‘S’ type) Schwarzer Außenmantel ISO-Steckverbinder ISO 1185 ISO 3731 ISO 1185 ISO 3731 ISO 4141 ISO 6722 Matériau stable à la chaleur et à la lumière Gaine extérieure de couleur noire Connecteurs ISO ISO 4141 ISO 6722 ISO 1185 ISO 3731 24 Volt – ISO 1185 Type ‘N’ Connectors ISO 4141 ISO 6722 6 x 1,5, 1 x 2,5mm2 Working Length Arbeitslänge Longueur de travail (x2) (x2) (x2) 3,0m 04419.8044 04419.1444 04419.0040 3,5m 04423.8044 04423.1444 04423.0040 4,0m 04426.8044 04426.1444 04426.0040 4,5m 04429.8044 04429.1444 04429.0040 24 Volt – ISO 3731 Type ‘S’ Connectors 4 x 1,5, 3 x 2,5mm2 Working Length Arbeitslänge Longueur de travail (x2) (x2) (x2) 3,0m 04519.8144 04519.4746 04519.0040 3,5m 04523.8144 04523.4746 04523.0040 4,0m 04526.8144 04526.4746 04526.0040 4,5m 04529.8144 04529.4746 04529.0040 No plugs / Keine Stecker / Sans fiche ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 16 Electrical Coils Elektrowendel Flexibles électriques ELECTRICAL 7-core AGL (‘420’ series) 7-adrig / à 7 conducteurs 19mm 19mm Type ‘N’ Type ‘S’ Sheath is extremely durable with excellent chemical resistance Black coloured outer sheath Heat and light stabilised material Colour coded ISO connectors (black for ‘N’ type, green for ‘S’ type) ISO 1185 ISO 3731 ISO 6722 Type ‘N’ Type ‘S’ Der Aussenmantel ist extrem haltbar und hat ausgezeichnete chemische Wiederstandsfähigkeit La gaine est extrêmement durable et présente une excellente résistance aux agents chimiques Schwarze äußere Ummantelung Gaine extérieure de couleur noire Hitze- und lichtbeständiges Material Matière stabilisée à la chaleur et à la lumière Farbgekennzeichnete ISOAnschlussstücke (schwarz for ‘N’-Typ, grün für ‘S’-Typ) Raccords ISO à code couleur (noir pour type en N, vert pour type en S) ISO 1185 ISO 3731 ISO 6722 ISO 1185 ISO 3731 ISO 6722 24 Volt 6 x 1,0, 1 x 1,5mm2 Working Length Arbeitslänge Longueur de travail ISO 1185 ‘N’ ISO 3731 ‘S’ ISO 1185 ‘N’ ISO 3731 ‘S’ 3,0m 42048.1570 42048.1580 42048.0540 42048.0640 3,5m 42056.1570 42056.1580 42056.0540 42056.0640 4,0m 42066.1570 42066.1580 42066.0540 42066.0640 4,5m 42074.1570 42074.1580 42074.0540 42074.0640 (x2) (x2) ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 17 ABS & EBS Products ABS & EBS -Produkte Produits ABS & EBS ELECTRICAL ABS Coil 5-core AGL (‘316’ series) ABS Wendel 5-adrig / Flexible ABS à 5 conducteurs 36mm 2 x 4, 3 x 1.5mm2 (∅10.3mm) 230mm 5-pole ABS coil 5-poliger ABS-Wendel Flexible ABS à 5 conducteurs Exceptional recoil properties Außergewöhnliche Rückstellfaktoren Propriétés de détente exceptionnelles Fully complies with ADR regulations Entspricht den ADR-Vorschriften Heat and light stabilised material Wärme-und lichtstabilisierter Werkstoff Entièrement conforme aux réglementations ADR Black coloured outer sheath Schwarzer Außenmantel Moulded anti-kink protection Gespritzter Knickschutz ISO Connectors ISO-Steckverbinder ISO 4091 ISO 4141 ISO 6722 ISO 7638 ISO 4091 ISO 4141 ISO 6722 ISO 7638 24 Volt Matériau stable à la chaleur et à la lumière Gaine extérieure de couleur noire Protection moulée anti-coque Connecteurs ISO ISO 4091 ISO 4141 ISO 6722 ISO 7638 2 x 4, 3 x 1,5mm2 Working Length Arbeitslänge Longueur de service No. of Turns Windungszahl Nbre de spires 3,0m 21 31624.7744 3,5m 26 31629.7744 4,0m 31 31634.7744 4,5m 35 31639.7744 x2 ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 18 ABS & EBS Products ABS & EBS -Produkte Produits ABS & EBS ELECTRICAL EBS Coil 7-core AGL (‘317’ and ‘427’ series) EBS Wendel 7-adrig / Flexible EBS à 7 conducteurs 317 Series 427 Series 24mm 230mm 2 x 4, 3 x 1,5 + (2 x 1,5)mm2 56mm 230mm 2 x 4, 3 x 1,5 + (2 x 1,5)mm2 7-pole EBS coil 7-adriger EBS Wendel Flexible EBS à 7 conducteurs Exceptional recoil properties Außergewöhnliche Rückstellfaktoren Propriétés de détente exceptionnelles Fully complies with ADR regulations Entspricht den ADR-Vorschriften Heat and light stabilised material Wärme-und lichtstabilisierter Werkstoff Entièrement conforme aux réglementations ADR Black coloured outer sheath Schwarzer Außenmantel Moulded anti-kink protection Gespritzter Knickschutz ISO Connectors ISO-Steckverbinder ISO 4091 ISO 6722 ISO 7638 ISO 4091 ISO 6722 ISO 7638 24 Volt Gaine extérieure de couleur noire Protection moulée anti-coque Connecteurs ISO ISO 4091 ISO 6722 ISO 7638 317 Series 2 x 4, 3 x 1,5 + (2 x 1,5)mm2 Matériau stable à la chaleur et à la lumière TPE 24 Volt 427 Series 2 x 4, 3 x 1,5 + (2 x 1,5)mm2 TPU Working Length Arbeitslänge Longueur de travail Part No. Teile Nr. Partie N0 Working Length Arbeitslänge Longueur de travail Part No. Teile Nr. Partie N0 3,0m 31718.9041 3,0m 42737.9041 3,5m 31721.9041 3,5m 42743.9041 4,0m 31725.9041 4,0m 42751.9041 4,5m 31728.9041 4,5m 42755.9041 ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 19 Electrical Coils Elektrowendel Flexibles électriques ELECTRICAL 13-Pole AGL (‘81’ series) 13-adrig / à 13 conducteurs 35mm 230mm ‘Thin Wall’ insulation with enhanced thermoplastic sheath Dünnwandige Isolierung mit verbessertem Thermoplastmantel Isolement «paroi mince» avec gaine thermoplastique renforcée Black coloured outer sheath Schwarzer Außenmantel Gaine extérieure de couleur noire Suitable for GGVS/ADR applications Geeignet für GGVS/ADR-Anwendungen Convient aux applications GGVS/ADR Exceptional recoil properties Außergewöhnliche Rückstellfaktoren Propriétés de détente exceptionnelles Heat and light stabilised material Wärme- und lichtstabilisiertes Material Matériau stable à la chaleur et à la lumière ISO 6772 ISO 6772 ISO 6772 Type A ∅ 35mm – 24 Volt 12 x 1,5, 1 x 2,5mm2 Working Length Arbeitslänge Longueur de travail 3,0m 3,5m 4,0m (x2) 08123.2640 08127.2640 08131.2640 ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED (x2) 08123.0040 08127.0040 08131.0040 20 Electrical Coils Elektrowendel Flexibles électriques ELECTRICAL 15-Pole AGL (‘328’ & ‘358’ series) 15-adrig / à 15 conducteurs 328 Series 358 Series 22mm 230mm 56mm 230mm ‘Thin Wall’ insulation with enhanced thermoplastic sheath Dünnwandige Isolierung mit verbessertem Thermoplastmantel Isolement «paroi mince» avec gaine thermoplastique renforcée Suitable for GGVS/ADR applications Geeignet für GGVS/ADR-Anwendungen Convient aux applications GGVS/ADR Exceptional recoil properties Außergewöhnliche Rückstellfaktoren Propriétés de détente exceptionnelles Heat and light stabilised material Wärme- und lichtstabilisiertes Material Matériau stable à la chaleur et à la lumière Black coloured outer sheath Schwarzer Außenmantel Gaine extérieure de couleur noire ISO Connectors ISO-Steckverbinder Connecteurs ISO ISO 4141 ISO 6772 ISO 12098 ISO 4141 ISO 6772 ISO 12098 ISO 4141 ISO 6772 ISO 12098 24 Volt 328 Series 12 x 1,5, 3 x 2,5mm TPU 2 Working Length Arbeitslänge Longueur de travail 3,5m 4,0m (x2) 32842.7840 32848.7840 24 Volt 358 Series 12 x 1,5, 3 x 2,5mm Working Length Arbeitslänge Longueur de travail 3,0m 3,5m 4,0m 4,5m ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED TPE 2 (x2) 35817.7843 35821.7843 35824.7843 35827.7843 21 Adapter Products Adapter-Produkte Produits de Raccordement ELECTRICAL Adapter Adaptateur AGL (‘128’ series) 7-pole ISO 1185 ‘N’ ISO 3731 ‘S’ 15-pole ISO 12098 Unique sealed-unit cable clamping arrangement – Patent pending Module serre câble scellé unique – Brevet en instance Einzigartige geschlossene Kabelklemmanordnung – Patent angemeldet Durable black coloured thermoplastic elastomer sheath Gaine résistante en élastomère thermoplastique de couleur noire Strapazierfähiger schwarz gefärbter Mantel aus Thermoplast-Elastomer Improved anti-entanglement features ISO Connectors Verbesserte Antitangel-Eigenschaften Propriétés anti-enchevêtrement renforcées ISO-Anschlussstücke Connecteurs ISO 15-pole to 7-pole ‘N’ & ‘S’ 15-adrig . . . / à 15 conducteurs . . . Working Length Arbeitslänge Longueur de travail 3,5m 4,0m Adapter Adaptateur 12847.3940 12857.3940 (‘130’ series) 12847.4240 12857.4240 Adapter coil wiring 15-pole connector (ISO 12098) Left-hand direction indicator light 1 Right-hand direction indicator light 2 Rear fog light 3 Common return 4 Left-hand rear positions and marker lights, and rear registration plate 5 illumination Right-hand rear position and marker lights, and rear registration 6 plate illumination 15-pole ISO 12098 Stop lights 7 Reversing light 8 Permanent power supply (+24 V) 9 Reverse lock release for inertia 10 brake and locking of steering axle 7-pole ISO 1185 ‘N’ type Wiring allocation: ISO 12098 7-pole ISO 3731 ‘S’ type Starting-traction control system 11 Axle lifting device 12 Common return for contacts No.14 13 and 15 CAN_H according to ISO 11992-3 14 CAN_L according to ISO 11992-3 15 24 N connector (ISO 1185) 1 Common return Left-hand rear positions and marker 2 lights, and rear registration plate illumination 3 Left-hand direction indicator light 4 Stop lights 5 Right-hand direction indicator light Right-hand rear position and 6 marker lights, and rear registration plate illumination 7 Braking control for trailers 24 S connector (ISO 3731) 1 Common return 2 No allocation 3 Reversing light 4 Permanent power supply (+24 V) 5 Sensing device with common return 6 Power supply controlled by ignition switch 7 Rear fog light 15-pole plug to 7-pole ‘N’ & ‘S’ sockets 15-adrig . . . à 15 conducteurs . . . 13000.3110 ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 22 AGL ELECTRICAL Special Applications Spezielle Anwendungen / Ensembles et applications spéciales Allen Industrial prides itself on providing high quality components for original equipment manufacturers and aftermarket outlets worldwide. With our experience, we are able to manufacture coil assemblies and a wide range of non-standard coils for special applications. A few examples: Allen Industrial ist stolz darauf, hochwertige Komponenten an Originalgerätehersteller und sekundäre Absatzmärkte weltweit zu liefern. Mit unserer Erfahrung sind wir in der Lage, Wendelbauteile und eine große Auswahl von nicht-standardmäßigen Wendeln für spezielle Anwendungen herzustellen. Ein paar Beispiele: Allen Industriel est fière des composants de qualité supérieure qu’elle fournit aux fabricants d’équipement d’origine et aux revendeurs du monde entier. Grâce à notre expérience, nous sommes capables de fabriquer des ensembles de flexibles et une vaste gamme de flexibles hors série pour applications spéciales. Quelques exemples: Red or yellow tail support ‘N’ or ‘S’ type connector Nested Coils Keeps coils firmly together for tangle-free connection between truck and drawbar trailer Hält die Wendel fest zusammen und vermeidet dadurch ein Verheddern der Verbindung zwischen Lkw und Anhänger Resserre le flexible pour assurer une connexion franche entre camion et remorque à barre de traction Available options include two-coil air brake or multi-coil air brake and electrical Druckluftbremsenkonstruktion mit 2 Wendeln oder Multi-WendelDruckluftbremse und elektrische Konstruktion Construction à frein pneumatique à 2 flexibles ou construction électrique et à frein pneumatique multiflexibles Air Brake Coils TÜV approved to DIN 74323 Easily tailored to specific application and connection requirements Druckluftwendeln TÜV-geprüft nach DIN 74323 Einfach zuzuschneiden auf spezielle Anwendungs- und Verbindungsanforderungen Flexibles pour freins pneumatiques à homologation TUV selon DIN 74323 Facilement particularisé selon l’application spécifique et les exigences de connexion 110mm Trombone Coils Electrical Coils for extendable ‘trombone type’ trailers Wendeln für ausziehbare ‘posaunenartige’ Anhänger Flexibles pour remorques extensibles de type “trombone” Please contact our Customer Services Department regarding the above products and any other special requirements. Long and Short Electrical Coils Lange und kurze Wendeln Flexibles longs et courts Bitte setzen Sie sich bezüglich der oben genannten Produkte und anderer spezieller Anforderungen mit unserer Kundendienstabteilung in Verbindung. ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED Veuillez contacter notre Service après-vente pour tout renseignement sur les produits cidessus et toute autre exigence spécifique. 23 Electrical connectors Steckverbinder Connecteurs ELECTRICAL 7-Pole (‘130’ series) 7-adriger / 7 conducteurs Type ‘N’ 24 Volt AGL Type ‘N’ Type ‘S’ no splashguard no splashguard Type ‘S’ with splashguard with splashguard ISO 1185 type ‘N’ 13000.1010 13000.1030 13000.8200 13000.1180 13000.5500 ISO 3731 type ‘S’ 13000.1020 13000.1040 13000.8300 13000.1300 13000.5600 Screw terminals / Schraubklemmen / Bornes à vis Spade terminals / Flachstecker / Bornes à cosse Type ‘N’ 24 Volt Type ‘S’ Type ‘N’ Type ‘S’ 24 Volt ISO 1185 type ‘N’ 13000.0300 ISO 1185 type ‘N’ 13000.1000 13000.0800 ISO 3731 type ‘S’ 13000.0400 ISO 3731 type ‘S’ 13000.1100 13000.0900 ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 24 Electrical connectors Steckverbinder Connecteurs ELECTRICAL 7-Pole AGL (‘130’ series) 7-adriger / 7 conducteurs 12 Volt Metal 12 Volt Plastic 13000.0100 13000.1370 13000.4800 13000.1371 13 & 15-Pole (‘130’ series) 13 & 15-adriger / 13 & 15 conducteurs Plug Socket Stecker Fiche Steckdose Prise GGVS/ADR GGVS/ADR 13-pole 13000.8800 – 15-pole (ISO 12098) 13000.8900 13000.8901 13-pole 13000.3200 – 15-pole (ISO 12098) 13000.5400 13000.5401 Crimp terminals / Crimp-Anschluss / Pince à dénuder Screw terminals / Schraubklemmen / Bornes à vis ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 25 Electrical connectors Steckverbinder Connecteurs ELECTRICAL ABS / EBS AGL (‘130’ series) Plug Socket Stecker Fiche Steckdose Prise ISO 109 ISO 7368 GGVS/ADR ISO 109 ISO 7368 GGVS/ADR ABS 5-pole 13000.7000 13000.7001 ABS 5-pole 13000.6900 13000.6901 EBS 7-pole 13000.8600 13000.8601 EBS 7-pole 13000.8700 13000.8701 Crimp terminals / Crimp-Anschluss / Pince à dénuder Screw terminals / Schraubklemmen / Bornes à vis Dummy Nose Box and Park Sockets Universal Dummy Nose Box Assembly 13, 15, ABS or EBS Park Socket (‘130’ series) 13, 15, ABS or EBS Park Socket 13000.8400 7-Pole Park Socket 13000.5520 7-Pole Park Sockets Stowage Hooks for Air Brake Coils Universal Dummy Nose Box Assembly 13000.8512 ALLEN ELECTRICAL IS A DIVISION OF ALLEN GROUP LIMITED 26 AGL DEVELOPMENTS EURO BOOM Based on the proven Classic EUROBOOM design, the Standard incorporates a number of enhancements designed particularly for the replacement market. Exterior-mounted cables and tubing Comprehensive fitting kit STANDARD Push-in air line fittings quick and easy connection Maintenance-free sealed bearing Heavy duty construction reinforced in all the major stress areas Fitting Kit All the fittings required to suit all popular applications Electrical cable and air lines externally mounted for easy access Industry standard connectors utilise existing truck connection points Reinforced front plate resistant to impact damage Standard M18 nipples connect to most standard coils Allen electrical sockets for a secure connection Customer Specification A range of Standard and Classic Eurobooms are available to suit most popular truck-trailer combinations. For many non-standard applications, Eurobooms can be manufactured to customer specifications. In some sliding fifth wheel applications, stainless steel braided air lines are recommended An umbilical option provides a total tractor-trailer connection that is neat, secure and extremely robust Technical Support The Allen Group is the leading specialist in the design and manufacture of commercial vehicle connection systems. Allen Group engineers provide full Euroboom support, from advice regarding application and any bespoke modifications, right through to installation support. The Euroboom is manufactured by Allen Group Limited, and is protected by pa We reserve the right to alter specification in our pursuit of technological innovation and improvement ALLEN DEVELOPMENTS IS A DIVISION OF ALLEN GROUP LIMITED 27 AGL DEVELOPMENTS Plug & Go FRAMES Allen A-Frames are a simple but very effective method of reducing coil wear and tear between tractor and trailer especially on close-coupled combinations. Each A-Frame is purpose designed, pre-wired and supplied with all necessary fi ttings to fit a particular make and model of vehicle. fit le to of b a l i Ava makes t o m s hicle ve Pre-wired to suit particular vehicle make and model Raises all connection points to same level keeps coils away from greasy areas resulting in cleaner coils Allen electrical sockets for a secure connection Raises the coils well away from all obstructions in catwalk area reduces tangling and snagging of coils Reduces the risk of coils getting caught on front corner clips of curtain-sided trailers reduces call out and downtime due to coil damage Supplied with all necessary stowage points utilises existing stowage points if suitable Plug into existing connection points no rewiring or pipe work required Ready to bolt on minimum fitting time Supplied with all necessary fittings utilises existing fittings if suitable Alre ad seve y fitted ral m to flee ajor ts Technical Support Customer Specification The Allen Group is the leading specialist in the design and manufacture of commercial vehicle connection systems. A range of Allen A-Frames are available to suit most makes of vehicle. Allen Group engineers provide full A-Frame support, from advice regarding application and any bespoke modifications, right through to installation support. For many non-standard applications, A-Frames can be manufactured to customer specifications. ALLEN DEVELOPMENTS IS A DIVISION OF ALLEN GROUP LIMITED 28 AGL DEVELOPMENTS SLIDING NOSEBOX Universal* solution to reduce coil damage and snagging between tractor and trailer By moving from side to side as the vehicle turns, the Sliding Nosebox minimises the strain on the coils. Top and bottom conveyor guides eliminate lateral movement and Superior construction ensure accurate and trouble -free stainless steel and other travel for the conveyor corrosion-resistant materials Unique guide/roller block mechanism trouble-free operation Compact design straight-forward fitting to most trailers (tractor -unit versions also available) Industry standard conveyor maintenance-free protection for Allen electrical sockets air lines and electrical cables (optional) Easy access When required, the unique design allows the connection plate to partially slide off the end of the guide rails for easy access to the fittings Universal Fit The Allen Sliding Nosebox is designed to fit directly on to the front of most standard trailers. Technical Support The Allen Group is the leading specialist in the design and manufacture of commercial vehicle connection systems. Allen Group engineers provide full Sliding Nosebox support, from advice regarding application and any bespoke modifications, right through to installation support. Customer Specification *The standard Allen Sliding Nosebox is suitable for most makes of trailer. Tractor-unit versions are also available. For many non-standard applications, noseboxes can be manufactured to customer specifications. Used in conjuction with the Allen A-Frame, the Sliding Nosebox prov ultimate protection against coil damage and snagging. ALLEN DEVELOPMENTS IS A DIVISION OF ALLEN GROUP LIMITED 29 AGL DEVELOPMENTS EASY-GRIP ‘C’ Coupling Handle The Allen Easy-Grip is a remarkably simple device designed to make tractor-trailer airbrake coupling safer and easier. The Easy-Grip is a low-cost accessory that dramatically improves the ease-of-use of the industry-standard air brake ‘C’ coupling. Secure grip and more control Reduce the strain on operator’s hands when coupling up the tractor and trailer Prevent operator’s hand slipping Reduce the risk of injury Compact design The Easy-Grip does not interfere with coils during vehicle articulation Manufactured from tough, durable rubber compound Virtually indestructable in normal operating conditions Reuseable – simple push-on fi t Transfer to replacement coil in event of coil or ‘C’ coupling failure Colour-coded Easy identifi cation of red and yellow air lines Technical Support The Allen Group is the leading specialist in the design and manufacture of commercial vehicle connection systems. We reserve the right to alter specification in our pursuit of technological innovation and improvement ALLEN DEVELOPMENTS IS A DIVISION OF ALLEN GROUP LIMITED 30 Thermoplastic Fuel Lines FLUID POWER With many years experience in the supply of both diesel and petrol fuel lines to the automotive industry, Allen Fluid Power have customer dedicated process facilities allowing ‘Kan-Ban’ deliveries of a range of high-tech flexible fuel lines in many bespoke configurations. Thermoplastische Kraftstoffleitungen Tubes thermoplastiques de carburant AGL ‘Just in Time’ delivery system developed to meet the demands of the most modern productionline requirements Utilising the Allen Group Research and Development facilities to keep abreast of all technological and commercial advances in material and process design, our team of engineers work extremely closely with customers’ design and development engineers. Allen Fluid Power meets the needs of existing and potential customers by a process of continuous improvement and innovation. Durch die langjährige Erfahrung bei der Lieferung von Diesel- und Benzinkraftstoffl eitungen an die Automobilindustrie hat Allen Fluid Power kundenspezifische Fertigungssynchrones Liefersystem, das für dieVerfahren für die Kan-Ban- Lieferung Bedürfnisse modernster Fließbandtechnologieverschiedener flexibler, entwickelt wurde hochtechnologischer Kraftstoffleitungen in vielen kundenspezifischen Konfigurationen entwickelt. Avec à son actif de nombreuses années d’expérience en tant que fournisseur de tubes pour carburants diesel et essence destinés à l’industrie automobile, Allen Fluid Power dispose d’installations de production conçues pour le client qui lui permettent de respecter le système Kan-Ban de livraisons sur une gamme de flexibles de carburant haute technologie disponibles dans de nombreuses configurations particularisées. Parce qu’elle fait usage des installations de Allen Group Research Inc Development pour suivre le rythme des progrès technologiques et commerciaux dans la conception des procédés et des matières, notre équipe d’ingénieurs travaille en étroite collaboration avec les ingénieurs d’étude et de développement des clients. Unser Ingenieurteam nutzt die Forschungsund Entwicklungseinrichtung der Allen Group, um über die technologische und kommerzielle Entwicklung bei der Material- und Verfahrenstechnik immer auf dem neuesten Stand zu sein und arbeitet sehr eng mit den Design- und Système de livraison “juste à temps” mis en Entwicklungsingenieuren der Kunden place pour répondre aux exigences des chaînes zusammen. de production les plus modernes. Allen Fluid Power wird den Ansprüchen vorhandener und auch potentieller Kunden durch kontinuierliche Verbesserung und Innovation gerecht. Allen Fluid Power a mis en oeuvre un système d’amélioration et d’innovation continues et peut ainsi satisfaire aux besoins de sa clientèle existante et potentielle. ALLEN FLUID POWER IS A DIVISION OF ALLEN GROUP LIMITED 31 Tube Manipulation Leitungsformung Manutention des tubes FLUID POWER Using state-of-the-art CNC tube manipulation and end forming machinery, Allen Fluid Power are high volume manufacturers of rigid pipes and shaped hose end terminations in a wide range of materials and configurations up to 32mm diameter. AGL Polymer coated steel brake pipes Rigid fuel lines Internal engine oil lines Heater rails Cooler pipes Dipstick tubes Allen Fluid Power benutzt modernste CNCMaschinen zur Verarbeitung und Formung und stellt starre Leitungen und angepaßte Leitungsendstücke in großen Mengen und in einer Vielzahl von Materialien und Konfigurationen mit Durchmessern von bis zu 32 mm her. Polymer-beschichtete Stahlbremsleitungen Starre Kraftstoffleitungen Ölleitungen für den Motorinnenraum Heizstäbe Kühlerleitungen Ölmeßstäbe Grâce à ses machines CNC ultramodernes de manutention de tubes et de formation d’extrémités, Allen Fluid Power fabrique en grandes quantités des tubes rigides et des embouts de tuyaux formés mesurant jusqu’à 32 mm de diamètre, dans une vaste gamme de matières et de configurations. Flexibles de freins en acier polymérisé Tube rigides de carburant Durits d’huile internes pour moteurs Tubes chauffants Tuyaux de refroidisseurs Tiges de jauges ALLEN FLUID POWER IS A DIVISION OF ALLEN GROUP LIMITED 32 Contact us AGL Contact us Contact us PNEUMATIC ELECTRICAL AUTOMOTIVE FLUID POWER Allen Group Limited Head Office Suffolk House, The Green, Wooburn Green High Wycombe HP10 0EU, United Kingdom Tel: (01628) 819155 Fax: (01628) 819255 E-mail: [email protected] DEVELOPMENTS www.allen-group.co.uk CHINA Phoenix House, Kinmel Park Industrial Estate Bodelwyddan, Denbighshire LL18 5TY, United Kingdom Tel: +44 (0)1745 586300 Fax: +44 (0)1745 586301 E-mail: [email protected] Kingfield Road, Coventry CV1 4NG, United Kingdom Tel: +44 (0)24 7623 1230 Fax: +44 (0)24 7622 4519 E-mail: [email protected] Unit 1, Boston Place, Coventry CV6 5NN, United Kingdom Tel: +44 (0)24 7668 6868 Fax: +44 (0)24 7668 4468 E-mail: [email protected] Allen Wuxi CV Parts Co Ltd Unit 11 Xiangnan Road, Shoufang Town, New District, Wuxi E-mail: [email protected]
© Copyright 2024 ExpyDoc