Fakultät für Werkstoffwissenschaft
und Werkstofftechnologie
Institut für Werkstofftechnik
Datum: 21. März 2016
Teilnahmebescheinigung
Kontakt:
Dr.-Ing. P. Trubitz
Tel.: +49 (3731) 39-2620,
Mail: [email protected]
Veröffentlichungen des IWT 2016
Publikationen international
Ackermann, S., S. Martin, M. Schwarz, C. Schimpf, D. Kulawinski, C. Lathe, S. Henkel, D. Rafaja,
H. Biermann und A. Weidner: Investigation of Phase Transformations in High-Alloy Austenitic TRIP
Steel Under High Pressure (up to 18 GPa) by In Situ Synchrotron X-ray Diffraction and Scanning
Electron Microscopy. Metallurgical and Materials Transactions A, Bd. 47, Nr. 1, S. 95–111, 2016.
DOI : http://dx.doi.org/10.1007/s11661-015-3082-2.
Biermann, H., A. Glage und M. Droste: Influence of Temperature on Fatigue-Induced Martensitic Phase
Transformation in a Metastable CrMnNi-Steel. Metallurgical and Materials Transactions A, Bd. 47,
Nr. 1, S. 84–94, 2016. DOI: http://dx.doi.org/10.1007/s11661-014-2723-1.
Decker, S., S. Martin und L. Krüger: Influence of Powder Particle Size on the Compaction Behavior and
Mechanical Properties of a High-Alloy Austenitic CrMnNi TRIP Steel During Spark Plasma Sintering.
Metallurgical and Materials Transactions A, Bd. 47, Nr. 1, S. 170–177, 2016. DOI: http://dx.doi.
org/10.1007/s11661-015-2861-0.
Eckner, R., M. Krampf, C. Segel und L. Krüger: Strength and Fracture Behavior of a Particle-Reinforced
Transformation-Toughened Trip Steel/ZrO2 Composite. Mechanics of Composite Materials, S. 1–14,
2016. DOI: http://dx.doi.org/10.1007/s11029-016-9541-z.
Heinze, D., A. Buchwalder, A. Jung, A. Weidner, C. Segel, A. Müller, R. Zenker und H. Biermann:
Functionally Graded High-Alloy CrMnNi TRIP Steel Produced by Local Heat Treatment Using HighEnergy Electron Beam. Metallurgical and Materials Transactions A, Bd. 47, Nr. 1, S. 123–138, 2016.
DOI : http://dx.doi.org/10.1007/s11661-015-3017-y.
Krewerth, D., T. Lippmann, A. Weidner und H. Biermann: Influence of non-metallic inclusions on fatigue
life in the very high cycle fatigue regime. International Journal of Fatigue, Bd. 84, S. 40–52, 2016.
DOI : http://dx.doi.org/10.1016/j.ijfatigue.2015.11.001.
Martin, S., S. Wolf, U. Martin, L. Krüger und D. Rafaja: Deformation Mechanisms in Austenitic TRIP/TWIP
Steel as a Function of Temperature. Metallurgical and Materials Transactions A, Bd. 47, Nr. 1, S. 49–
58, 2016. DOI: http://dx.doi.org/10.1007/s11661-014-2684-4.
Mezzetti, M., M. Radajewski, M. Reich und L. Krüger: FAST Materials for Rock Destruction Applications.
Nanoscience and Nanotechnology, Bd. 6, Nr. 1A, S. 77–82, 2016. DOI: DOI : 10 . 5923 / c . nn .
201601.15.
Müller, A., C. Segel, M. Linderov, A. Vinogradov, A. Weidner und H. Biermann: The Portevin–Le
Châtelier Effect in a Metastable Austenitic Stainless Steel. Metallurgical and Materials Transactions
A, Bd. 47, Nr. 1, S. 59–74, 2016. DOI: http://dx.doi.org/10.1007/s11661-015-2953-x.
Rahimi, R., C. Ullrich, V. Klemm, D. Rafaja, B. C. D. Cooman, H. Biermann und J. Mola: Influence of Al
on the temperature dependence of strain hardening behavior and glide planarity in Fe–Cr–Ni–Mn–C
austenitic stainless steels. Materials Science and Engineering: A, Bd. 649, S. 301–312, 2016. DOI:
http://dx.doi.org/10.1016/j.msea.2015.10.005.
Teilnahmebescheinigung (21. März 2016/Dr.-Ing. P. Trubitz): Veröffentlichungen des IWT 2016
Seite 2 von 2
Solarek, J., C. Bachmann, Y. Klemm, C. G. Aneziris und H. Biermann: High-Temperature Compression
Deformation Behavior of Fine-Grained Carbon-Bonded Alumina. Journal of the American Ceramic
Society 2016. DOI: http://dx.doi.org/10.1111/jace.14070.
Weidner, A., R. Kolmorgen, I. Kubena, D. Kulawinski, T. Kruml und H. Biermann: Decomposition and
Precipitation Process During Thermo-mechanical Fatigue of Duplex Stainless Steel. Metallurgical and
Materials Transactions A, S. 1–13, 2016. DOI: http://dx.doi.org/10.1007/s11661-016-3392-z.
Wendler, M., B. Reichel, R. Eckner, O. Fabrichnaya, L. Krüger, A. Weiß und J. Mola: Effect of Vanadium Nitride Precipitation on Martensitic Transformation and Mechanical Properties of CrMnNi Cast
Austenitic Steels. Metallurgical and Materials Transactions A, Bd. 47, Nr. 1, S. 139–151, 2016. DOI:
http://dx.doi.org/10.1007/s11661-014-2716-0.