IBL S.P.A.

IBL S.P.A.
S.P. 31 bis - Regione Cavallino, 8
I - 15030 - Coniolo (AL)
PRODUCT CERTIFICATE
FOR CARB n° 011 04/13
By order of California Air Resources Board, according to the Executive Order W-12-016,
relating to ARB approval of Third Party Certifiers under California Code of Regulation
(Final Regulation Order, Airborne Toxic Control Measure §93120), having
verified the accuracy of emission test procedures and facilities for Factory Production Control
of manufacturer and evaluated them;
monitored the manufacturer quality assurance programs;
verified the correlation of the FPC with the secondary test method;
provided independent audits and inspections as an ARB approval TPC accordig to the
supervision contract 011-2013-016, fourth quarter of 2013
verified the provisions concerning IOS-MAT-0003, last revision
•
•
•
•
•
we hereby certify that the product
Plywood, urea-formaldehyde (UF), unfaced
technical class: CARB Phase 2
thickness range : 3 mm ≤ 19 mm
product name: Plywood
produced by the above mentioned company has met the requirements of the
CATAS QUALITY AWARD - FORMALDEHYDE CARB rev. 00 dated 19.11.2013
technical rules, concerning the compliance with the emission standards of
PHASE 2
according to Table 1 in
FRO ATCM §93120.2 (a)
This evaluation is based on the monitoring and the test reports number:
from 168927/1 to 168927/6 dated January 17th, 2014
FOR
October, 30th 2012
January, 14th 2014
June, 14th 2014
FIRST ISSUE
CURRENT ISSUE
VALID UNTIL
CATAS S.p.A.
Iscr. Reg. Imprese Udine
nr.iscr. C.F. 01818850305
Reg. Impr. UD 20663
P.IVA 01818850305
C.Soc. 1.003.650,00 Euro i.v.
Sede: Via Antica 24/3
San Giovanni al Natisone 33048 (UD)
[email protected]
dr. Andrea Giavon
Chief Executive
This document is validated by digital signature and time
stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature
systems.

Download Report