KMAT MINI L Year of last update: 2014 Application: Erosion control STRUCTURE: three dimensional, high void ratio erosion prevention geomat obtained from extruded monofilaments tangled and welded where they cross. PROPERTIES Product Raw material (+ UV stabilizer) Void ratio % Geomat Polypropylene ±5% >95 PHYSICAL/ MECHANICAL CHARACTERISTICS Thickness at 2 kPa EN ISO 9863-1 Tensile strength MD EN ISO 10319 Tensile strength CMD EN ISO 10319 Extension at max load MD EN ISO 10319 Extension at max load CMD EN ISO 10319 mm kN/m kN/m % % 10 >1,2 >0,4 >50 >50 tol DIMENSIONAL CHARACTERISTICS STANDARD DIMENSIONS Roll width Roll length Roll area Roll diameter Roll weight Rolls/pallet tol ±3 tol m m m2 cm Kg n° 2-4 75 150-300 60 45-90 4 -5% ±5% ±5% ±10% The information given in this data sheet is to the best of our knowledge true and correct. TeMa srl reserves the right to change its product specifications at any time. It is the responsibility of the specifier and purchaser to ensure that product specifications used for design and procurement purposes are current and consistent with the products used in each instance. gen-14 MD: Machine direction CMD: Cross machine direction Via dell'Industria 21 - 31029 Vittorio V.to (TV) Tel. +39.0438.50.31 - Fax +39.0438.50.34.60 - e-mail: [email protected] - www.temacorporation.com rev. 3 TeMa Technologies and Materials srl K MAT RF METAL STRUTTURA / Structure : Geostuoia tridimensionale antierosione ottenuta per estrusione di monofilamenti sintetici aggrovigliati e saldati nei punti di contatto accoppiata durante il processo produttivo a una rete metallica a doppia torsione / Three dimensional anti erosion geomat used as a superficial erosion control bonded during the production process to a double twisted metal mesh. DESCRIZIONE Description K MAT RF METAL K MAT RF METAL K MAT RF METAL 68 810 810 PVC Identificazione materiale / Material identification Strato antierosivo Strato antierosivo Strato antierosivo superficiale / Superficial superficiale / Superficial superficiale / Superficial anti erosion anti erosion anti erosion Applicazione / Function PP Materia prima / Raw material PROPRIETA' DEL MATERIALE DI RINFORZO Reinforcement material properties Norma di riferimento Reference norm Unità di misura Measuring unit Rete a doppia Rete a doppia Rete a doppia torsione in acciaio torsione in acciaio torsione in acciaio zincato a maglia zincato a maglia zincato a maglia esagonale / Double esagonale / Double esagonale rivestita twisted zinc coated twisted zinc coated con PVC / Double steel woven wire steel woven wire twisted zinc coated mesh mesh steel woven wire mesh with PVC coating Proprietà della rete a maglia metallica e doppia torsione / Properties of metallic grid EN 10223-3 Proprietà della protezione del filo metallico / Properties of the protection of the metallic wire EN 10244-2 Dimensioni maglia / Mesh size classe A / class A classe A / class A classe A / class A 6x8 8x10 8x10 2.2 2.7 2,7/3,7 - - 0.5 18 18 18 % >95 >90 >90 kN/m >35 >47 >47 % 5 5 5 mm Spessore del rivestimento plastico / Plastic coating thickness Indice dei vuoti / Void ratio Resistenza a trazione MD / Tensile strength MD Allungamento a carico massimo MD / Elongation at max load MD Conforme ai requisiti Conforme ai requisiti Conforme ai requisiti / Accordance to / Accordance to / Accordance to requirements requirements requirements cm Diametro del filo / Wire thickness Spessore totale / Total Thickness PP Tolleranza Tolerances Materia prima / Raw material CARATTERISTICHE FISICHE / MECCANICHE Physical and mechanical characteristics PP mm Norma di riferimento Reference norm EN 9863-1 EN 10319 EN 10319 Unità di misura Measuring unit Tolleranza Tolerances mm +/-3 DIMENSIONI CARATTERISTICHE Package dimensions Larghezza rotolo / Roll width Lunghezza rotolo / Roll length Area rotolo / Roll area Diametro rotolo / Roll diameter m -5% 3 3 3 m +/-5% 75 75 75 225 225 225 120 120 120 m 2 cm +/-5% Le informazioni qui riportate sono basate sull'attuale nostro livello di conoscenza e produzione. Nuove ricerche e sviluppi sul prodotto potranno rendere necessarie ulteriori versioni. Per questo motivo ci riserviamo il diritto di aggiornare le schede tecniche. Le caratteristiche espresse si riferiscono alla produzione standard. Eventuali scostamenti o richieste di prodotti speciali, si intendono da concordare preventivamente. Nessuna garanzia può derivare dalle informazioni inserite in questo documento rev 01 TeMa Technologies and Materials srl Via dell'Industria, 21 31029 Vittorio V.to (TV) - I Tel. +39.0438.50.31 - Fax +39.0438.50.34.60 e-mail: [email protected] www.temacorporation.com mar-13 # The information given in this data sheet is to the best of our knowledge true and correct, however new research results and practical experience can make revisions necessary. No guarantee or liability can be drawn from the information mentioned herein. Furthermore, is not our intention to violate any patents or licences. KMAT SUPER L J Year of last update: 2014 Application: Erosion control STRUCTURE: three dimensional, high void ratio erosion prevention geomat obtained from extruded monofilaments tangled and welded where they cross. PROPERTIES Product Raw material (+ UV stabilizer) Void ratio % Geomat Polypropylene ±5% >95 PHYSICAL/ MECHANICAL CHARACTERISTICS Thickness at 2 kPa EN ISO 9863-1 Tensile strength MD EN ISO 10319 Tensile strength CMD EN ISO 10319 Extension at max load MD EN ISO 10319 Extension at max load CMD EN ISO 10319 mm kN/m kN/m % % 22 >1,9 >0,6 >50 >50 tol DIMENSIONAL CHARACTERISTICS STANDARD DIMENSIONS Roll width Roll length Roll area Roll diameter Roll weight Rolls/pallet tol ±3 tol m m m2 cm Kg n° 2-4 40 80-160 60 44-88 4 -5% ±5% ±10% The information given in this data sheet is to the best of our knowledge true and correct. TeMa srl reserves the right to change its product specifications at any time. It is the responsibility of the specifier and purchaser to ensure that product specifications used for design and procurement purposes are current and consistent with the products used in each instance. gen-14 MD: Machine direction CMD: Cross machine direction Via dell'Industria 21 - 31029 Vittorio V.to (TV) Tel. +39.0438.50.31 - Fax +39.0438.50.34.60 - e-mail: [email protected] - www.temacorporation.com rev. 3 TeMa Technologies and Materials srl KMAT SUPER L Year of last update: 2014 Application: Erosion control STRUCTURE: three dimensional, high void ratio erosion prevention geomat obtained from extruded monofilaments tangled and welded where they cross. PROPERTIES Product Raw material (+ UV stabilizer) Void ratio % Geomat Polypropylene ±5% >95 PHYSICAL/ MECHANICAL CHARACTERISTICS Thickness at 2 kPa EN ISO 9863-1 Tensile strength MD EN ISO 10319 Tensile strength CMD EN ISO 10319 Extension at max load MD EN ISO 10319 Extension at max load CMD EN ISO 10319 mm kN/m kN/m % % 22 >1,8 >0,5 >50 >50 tol DIMENSIONAL CHARACTERISTICS STANDARD DIMENSIONS Roll width Roll length Roll area Roll diameter Roll weight Rolls/pallet tol ±3 tol m m m2 cm Kg n° 2-4 50 100-200 60 50-100 4 -5% ±5% ±10% The information given in this data sheet is to the best of our knowledge true and correct. TeMa srl reserves the right to change its product specifications at any time. It is the responsibility of the specifier and purchaser to ensure that product specifications used for design and procurement purposes are current and consistent with the products used in each instance. gen-14 MD: Machine direction CMD: Cross machine direction Via dell'Industria 21 - 31029 Vittorio V.to (TV) Tel. +39.0438.50.31 - Fax +39.0438.50.34.60 - e-mail: [email protected] - www.temacorporation.com rev. 3 TeMa Technologies and Materials srl KMAT MINI L GRASS Year of last update: 2014 Application: Erosion control STRUCTURE: three dimensional, high void ratio erosion prevention geomat obtained from extruded monofilaments tangled and welded where they cross thermally bonded to a biodegradable preseeded textile PROPERTIES Product Raw material (+ UV stabilizer) Void ratio tol Geomat Polypropylene % >95 PROPERTIES OF SEEDED TEXTILE Textile raw material Textile saturation material Thickness at 2 kPa Tensile strenght MD Extension at max load MD ±5% tol EN ISO 9863 EN ISO 10319 EN ISO 10319 PHYSICAL/ MECHANICAL CHARACTERISTICS Thickness at 2 kPa EN ISO 9863-1 Tensile strength MD EN ISO 10319 Tensile strength CMD EN ISO 10319 Extension at max load MD EN ISO 10319 Extension at max load CMD EN ISO 10319 DIMENSIONAL CHARACTERISTICS STANDARD DIMENSIONS Roll width Roll length Roll area Roll diameter Roll weight Rolls/pallet Viscose Seeds, fertilizer, inerts mm 3 kN/m >0,6 % >40 ±1 tol mm kN/m kN/m % % 10 >1,2 >0,4 >40 >40 ±3 tol m m m2 cm Kg n° 2-4 30 60-120 40 27-54 9 -5% ±5% ±5% ±10% The information given in this data sheet is to the best of our knowledge true and correct. TeMa srl reserves the right to change its product specifications at any time. It is the responsibility of the specifier and purchaser to ensure that product specifications used for design and procurement purposes are current and consistent with the products used in each instance. gen-14 MD: Machine direction CMD: Cross machine direction Via dell'Industria 21 - 31029 Vittorio V.to (TV) Tel. +39.0438.50.31 - Fax +39.0438.50.34.60 - e-mail: [email protected] - www.temacorporation.com rev. 3 TeMa Technologies and Materials srl
© Copyright 2025 ExpyDoc
