REBRAKE - Università degli Studi di Trento

EC Seventh Framework Programme
Project Co-funded by the European Commission
Grant agreement no.: 324385
Call identifier: FP7-PEOPLE-2012-IAPP
Project Start Date: 01/03/2013
REBRAKE
50% Reduction of Brake Wear Particulate Matter
Workshop - Characterization of collected particles and wear tracks
Date: September 2014
Place: Trento
Organized by: UniTN
REBRAKE
Page 1
Workshop Agenda
PRELIMINARY PROGRAM
THURSDAY 25.09.2014
5.00 – 7.00 pm
REBRAKE Technical Meeting (Attendance for REBRAKE researchers only)
“Hotel America” - Conference Room
Address: Via Torre Verde 50, Trento
www.hotelamerica.it
8.00 pm
Welcome Party
“Hotel America”
Address: Via Torre Verde 50, Trento
www.hotelamerica.it
FRIDAY 26.09.2014
9.00 – 4.30 pm
Conference room (ground floor)
Department of Economics – Università degli Studi di Trento
Address: Via Inama 5, Trento
REBRAKE
Page 2
9.00 –
9.15 am
Introduction & Welcome Speech
Alessandro Ciotti (Brembo SpA) – Scientific Coordinator of REBRAKE project
Claudio Migliaresi – Director of the Department of Industrial Engineering, UniTN
Giovanni Straffelini - Responsible of REBRAKE local research unit
9.15 –
11.00 am
Session 1 – Chairperson: Giovanni Straffelini
9.15 am - Keynote presentation “Frictional and wear properties of cohesive and noncohesive rocks”
Giulio di Toro - Department of Geosciences,
University of Padova, Italy
10.00 am –
Invited presentation
“Third body characterization and modeling related to
automotive braking”
Werner Österle - Federal Institute for Materials
Research and Testing, Berlin, Germany
10.30 am –
Rebrake project presentation
“A comparative study of airborne particulates
collected in car and railroad tunnels”
Ulf Olofsson - Royal Institute of Technology - KTH,
Stockholm, Sweden
11.00
Coffee break
11.20 –
12.50 pm
REBRAKE
Session 2 - Chairperson: Ulf Olofsson
11.20 am –
Invited presentation
“Reaserch activities on automotive friction composites
at VSB - Technical University of Ostrava”
Jana Kukutschova - VSB - Nanotechnology Centre,
Technical University Ostrava, Czech Republic
11.50 am –
Invited presentation
“Measurement techniques for particulate emissions in
the European legislation: from mass to number and
from lab to on-board”
Francesco Riccobono - European Commission, Joint
Research Centre, Institute for Energy and Transport,
Sustainable Transport Unit, Ispra, Italy
Page 3
12.20 am –
Invited presentation
“Human exposure criticalities to traffic air pollutants
in urban areas”
Marco Ragazzi - Department of Civil, Environmental
and Mechanical Engineering, University of Trento,
Italy
1.00 –
2.00 pm
Working lunch
2.00 –
4.00 pm
Session 3 - Chairperson: Guido Perricone
2.00 pm –
Rebrake project presentation
“Single particle analysis of wear debris”
Giulia Bertolotti°, Gloria Ischia* , Stefano
Gialanella*
°: The Fitzwilliam Museum, Cambridge, UK
*: Department of Industrial Engineering, University of
Trento, Italy
2.30 pm –
Rebrake project presentation
“Characterization of brake wear debris using
microscopy and spectroscopy techniques”
Piyush Chandra Verma - Department of Industrial
Engineering, University of Trento, Italy
3.00 pm –
Invited presentation
“Quantitative and microstructural analysis of complex
materials using X-ray diffraction and the Rietveld
method”
Luca Lutterotti - Department of Industrial
Engineering, University of Trento, Italy
3.30 pm –
Rebrake project presentation
“Friction layer and wear of brake materials”
Andrea Bonfanti°, Rodica Ciudin*, Giovanni
Straffelini*
°: Brembo S.p.A., Stezzano, Italy
*: Department of Industrial Engineering, University of
Trento, Italy
Open discussion and closing remarks
5.00 –
7.00 pm
8.00 pm
REBRAKE
Sightseeing tour of Trento
(meeting point: Hotel America)
Working dinner
Page 4

Download Report