VLOERBEKLEDING

NORMEN VOOR VLOERBEKLEDING
EUROPESE EN INTERNATIONALE NORMEN
VLOERBEKLEDING
A SHORT GUIDE
(versie 2014)
NOTA:
De volledige teksten van de normen kunt u enkel aankopen bij uw nationale normalisatie-organisatie:
NBN
Jozef II-straat 40
B-1000 Brussel
NBN
40, Rue Joseph II
B-1000 Bruxelles
©Centexbel 2014 | Pagina 1
NORMEN VOOR VLOERBEKLEDING
NORMEN VOOR VLOERBEKLEDING
CEN/TC 134 ontwikkelt Europese normen voor flexibele vloerbekleding. Dit omvat de productgroepen resilient,
textiel en laminaat vloerbekleding.
ISO/TC 219 is de internationale tegenhanger van CEN/TC 134. Een toenemend aantal normen worden ontwikkeld
onder het Vienna Agreement, wat betekent dat de uiteindelijke norm zowel een Europese als een internationale
status heeft.
Beide groepen hebben samen zowat 150 normen gepubliceerd, soms gemeenschappelijk voor de drie
productgroepen, maar meestal voor één specifieke groep.
GEMEENSCHAPPELIJKE NORMEN VOOR DE DRIE PRODUCTGROEPEN
(RESILIENT, TEXTIEL, LAMINAAT)
REFERENTIE
TITEL
TOELICHTING
CEN/TS 14472-1:2003
Resilient, textile and laminate floor
coverings - Design, preparation and
installation - Part 1: General
Technische Specificatie in 4 delen. Deel
1 behandelt de algemene aspecten van
het installeren van een vloerbekleding. De
delen 2, 3 en 4 handelen over de specifieke
productfamilies: resilient, textiel en laminaat.
CEN/TS 15398:2008
Resilient, textile and laminate floor
Technische specificatie die een overzicht
coverings - Floor covering standard symbols geeft van alle pictogrammen, die men
op een vloerbekleding kan aantreffen
en die de gebruiker informeren over de
kwaliteitskenmerken ervan.
EN 13893:2002
Resilient, laminate and textile floor
coverings - Measurement of dynamic
coefficient of friction on dry floor surfaces
Testmethode voor het bepalen van
de antislipkenmerken van een (droge)
vloerbekleding.
EN 14041:2004/AC:2006
Resilient, textile and laminate floor
coverings - Essential characteristics
Geharmoniseerde Europese norm voor
vloerbekledingen. Geeft informatie over
de kenmerken die vereist zijn voor de CE
markering en de prestatieverklaring (DoP)
EN ISO 10580:2012
Resilient, textile and laminate floor
coverings - Test method for volatile
organic compound (VOC) emissions (ISO
10580:2010)
Testmethode voor het bepalen van de
emissie van vluchtige stoffen door een
vloerbekleding.
EN ISO 10874:2012
Resilient, textile and laminate floor
coverings - Classification (ISO 10874:2009)
Norm die gebruiksklassen definieert voor
vloerbekleding. Deze klassen houden
rekening met het soort gebruik (privé,
publiek, industrieel) en de intensiteit ervan.
ISO 4918:2009
Resilient, textile and laminate floor
coverings - Castor chair test
Testmethode die de slijtage van een
vloerbekleding door een bureaustoel
simuleert.
©Centexbel 2014 | Pagina 2
NORMEN VOOR VLOERBEKLEDING
NORMEN VOOR RESILIËNTE VLOERBEKLEDING (VINYL, LINOLEUM, KURK, RUBBER, ENZ.)
Algemene normen
Productnormen
Testnormen
EN 650:2012
Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification
EN 651:2011
Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification
EN 652:2011
Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing Specification
EN 655:2011
Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification
EN 686:2011
Resilient floor coverings - Specification for plain and decorative linoleum on a foam
backing
EN 687:2011
Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing
EN 688:2011
Resilient floor coverings - Specification for corklinoleum
EN 1816:2010
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth
rubber floor coverings with foam backing
EN 1817:2010
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth
rubber floor coverings
EN 12103:1999
Resilient floor coverings - Agglomerated cork underlays - Specification
EN 12104:2000
Resilient floor coverings - Cork floor tiles - Specification
EN 12105:1998
Resilient floor coverings - Determination of moisture content of agglomerated composition cork
EN 12199:2010
Resilient floor coverings - Specifications for homogeneous and heterogeneous relief
rubber floor coverings
EN 12455:1999
Resilient floor coverings - Specification for corkment underlay
EN 13413:2001
Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing Specification
EN 13553:2002
Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas
- Specification
EN 13845:2005
Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification
EN 14085:2010
Resilient floor coverings - Specification for floor panels for loose laying
EN 14521:2004
Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer
EN 14565:2004
Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification
EN ISO 10581:2013
Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011)
EN ISO 10582:2012
Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor coverings - Specification (ISO 10582:2010)
EN ISO 10595:2012/AC:2012
Resilient floor coverings - Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride)
floor tiles - Specification (ISO 10595:2010)
EN ISO 24011:2012
Resilient floor coverings - Specification for plain and decorative linoleum (ISO
24011:2009)
©Centexbel 2014 | Pagina 3
NORMEN VOOR VLOERBEKLEDING
EN ISO 26986:2012/AC:2012
Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering Specification (ISO 26986:2010)
ISO 10575:2012
Resilient floor coverings - Specification for rubber sheet floor coverings with backing
ISO 10577:2012
Resilient floor coverings - Specification for rubber sheet floor coverings without backing
ISO 11638:2012
Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification
EN 424:2001
Resilient floor coverings - Determination of the effect of simulated movement of a
furniture leg
EN 425:2002
Resilient and laminate floor coverings - Castor chair test
EN 432:1994
Resilient floor coverings - Determination of shear force
EN 660-2:1999/A1:2003
Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test
EN 661:1994
Resilient floor coverings - Determination of the spreading of water
EN 662:1994
Resilient floor coverings - Determination of curling exposure to moisture
EN 663:1994
Resilient floor coverings - Determination of conventional pattern depth
EN 664:1994
Resilient floor coverings - Determination of volatile loss
EN 665:1994
Resilient floor coverings - Determination of exudation of plasticizers
EN 666:1994
Resilient floor coverings - Determination of gelling
EN 669:1997
Resilient floor coverings - Determination of dimensional stability of linoleum tiles
caused by changes in atmospheric humidity
EN 672:1996
Resilient floor coverings - Determination of apparent density of agglomerated cork
EN 684:1995
Resilient floor coverings - Determination of seam strength
EN 1081:1998
Resilient floor coverings - Determination of the electrical resistance
EN 1399:1997/AC:1998
Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes
EN 1815:1997
Resilient and textile floor coverings - Assessment of static electrical propensity
EN 1818:1998
Resilient floor coverings - Determination of the effect of loaded heavy duty castors
EN ISO 23996:2012
Resilient floor coverings - Determination of density (ISO 23996:2007)
EN ISO 23997:2012
Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007)
EN ISO 23999:2012
Resilient floor coverings - Determination of dimensional stability and curling after
exposure to heat (ISO 23999:2008)
EN ISO 24340:2012
Resilient floor coverings - Determination of thickness of layers (ISO 24340:2006)
EN ISO 24341:2012
Resilient and textile floor coverings - Determination of length, width and straightness
of sheet (ISO 24341:2006)
EN ISO 24342:2012/A1:2012
Resilient and textile floor-coverings - Determination of side length, edge straightness
and squareness of tiles - Amendment 1 (ISO 24342:2007/Amd 1:2012)
EN ISO 24343-1:2012
Resilient and laminate floor coverings - Determination of indentation and residual
indentation - Part 1: Residual indentation (ISO 24343-1:2007)
ISO 24343-2:2011
Resilient and laminate floor coverings - Determination of indentation and residual
indentation - Part 2: Short-term residual indentation of resilient floor covering
©Centexbel 2014 | Pagina 4
NORMEN VOOR VLOERBEKLEDING
ISO 24343-3:2011
Resilient and laminate floor coverings - Determination of indentation and residual
indentation - Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
EN ISO 24344:2012
Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008)
EN ISO 24345:2012
Resilient floor coverings - Determination of peel resistance (ISO 24345:2006)
EN ISO 24346:2012
Resilient floor coverings - Determination of overall thickness (ISO 24346:2006)
EN ISO 26985:2012
Resilient floor coverings - Identification of linoleum and determination of cement content and ash residue (ISO 26985:2008)
EN ISO 26987:2012
Resilient floor coverings - Determination of staining and resistance to chemicals (ISO
26987:2008)
©Centexbel 2014 | Pagina 5
NORMEN VOOR VLOERBEKLEDING
NORMEN VOOR TEXTIEL VLOERBEKLEDING (GEWEVEN TAPIJT, NAALDVILT, POOLTAPIJT, ENZ.)
Algemene normen
Productnormen
Testnormen
ISO 2424:2007
Textile floor coverings - Vocabulary
ISO 6347:2004
Textile floor coverings - Consumer information
ISO 13746:2000
Textile floor coverings - Guidelines for installation and use on stairs
CEN/TS 14472-2:2003
Resilient, textile and laminate floor coverings - Design, preparation and installation Part 2: Textile floor coverings
CEN/TS 14159:2007
Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs,
runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
CEN/TS 16641:2014
Textile floor coverings - Guidelines for acceptable colour deviations
EN 1307:2014
Textile floor coverings - Classification
ISO 11859:1999
Textile floor coverings - Pure wool, hand-knotted pile carpets - Specification
ISO 11860:1999
Textile floor coverings - Jute carpet backing fabric - Specification
ISO 11861:1999
Textile floor coverings - Coir mats - Types and specification
EN 14215:2013
Textile floor coverings - Classification of machine-made pile rugs and runners
EN 14499:2004
Textile floor coverings - Minimum requirements for carpet underlays
EN 15772:2012
Textile floor coverings - Minimum requirements for needled floor coverings for single
usage in events of limited duration
EN 984:2001
Textile floor coverings - Determination of the mass per unit area of the use surface of
needled floor coverings
EN 985:2001
Textile floor coverings - Castor chair test
EN 986:2005
Textile floor coverings - Tiles - Determination of dimensional changes due to the effects
of varied water and heat conditions and distortion out of plane
EN 994:2012
Textile floor coverings - Determination of the side length, squareness and straightness
of tiles
EN 995:1995
Textile floor coverings - Assessment of the creep of the backings
EN 1269:1997/A1:2007
Textile floorcoverings - Assessment of impregnations in needled floorcoverings by
means of a soiling test
EN 1318:2005/AC:2007
Textile floor coverings - Determination of the apparent effective thickness of the backing
EN 1471:1996/A1:2003
Textile floor coverings - Assessment of changes in appearance
ISO 1763:1986
Carpets - Determination of number of tufts and/or loops per unit length and per unit
area
ISO 1765:1986
Machine-made textile floor coverings - Determination of thickness
ISO 1766:1999
Textile floor coverings - Determination of thickness of pile above the substrate
EN 1814:2005
Textile floor coverings - Determination of resistance to damage at cut edges using the
modified Vettermann drum test
©Centexbel 2014 | Pagina 6
NORMEN VOOR VLOERBEKLEDING
EN 1815:1997
Resilient and textile floor coverings - Assessment of static electrical propensity
ISO 1957:2000
Machine-made textile floor coverings - Selection and cutting of specimens for physical
tests
EN 1963:2007
Textile floor coverings - Tests using the Lisson Tretrad Machine
ISO 2094:1999
Textile floor coverings - Determination of thickness loss under dynamic loading
ISO 2549:1972
Textile floor coverings - Hand-knotted carpets - Determination of tuft leg length above
the woven ground
ISO 2550:1972
Textile floor coverings - Hand-made carpets - Determination of types of knots
ISO 2551:1981
Machine-made textile floor coverings - Determination of dimensional changes due to
the effects of varied water and heat conditions
ISO 3018:1974
Textile floor coverings - Rectangular textile floor coverings - Determination of dimensions
ISO 3415:1986
Textile floor coverings - Determination of thickness loss after brief, moderate static
loading
ISO 3416:1986
Textile floor coverings - Determination of thickness loss after prolonged, heavy static
loading
ISO 4919:2012
Carpets - Determination of tuft withdrawal force
ISO 5086:1977
Textile floor coverings - Hand-knotted carpets - Sampling and selection of areas of test
ISO 6356:2012
Textile and laminate floor coverings - Assessment of static electrical propensity - Walking test
ISO 6925:1982
Textile floor coverings - Burning behaviour - Tablet test at ambient temperature
ISO 8543:1998
Textile floor coverings - Methods for determination of mass
ISO 9405:2001
Textile floor coverings - Assessment of changes in appearance
ISO 10361:2012
Textile floor coverings - Production of changes in appearance by means of Vettermann
drum and hexapod tumbler tester
ISO 10833:2001
Textile floor coverings - Determination of resistance to damage at cut edges using the
modified Vettermann drum test
ISO 10834:1992
Textile floor coverings - Non-destructive measurement of pile thickness above the
backing - WRONZ gauge method
ISO 10965:2011
Textile floor coverings - Determination of electrical resistance
ISO 11377:1997
Textile floor coverings - Floor soiling - Test site set-up and soiling evaluation
ISO 11378-1:2000
Textile floor coverings - Laboratory soiling tests - Part 1: Kappasoil test
EN ISO 11378-2:2001
Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-2:2001)
ISO 11379:2009
Textile floor coverings - Laboratory cleaning procedure using spray extraction
ISO 11856:2014
Textile floor coverings - Test methods for the determination of fibre bind using a Modified Martindale Machine
EN ISO 11857:2002
Textile floor coverings - Determination of resistance to delamination (ISO 11857:1999)
ISO 11858:1999
Textile floor coverings - Determination of friability of attached foams
ISO 12951:1999
Textile floor coverings - Determination of mass loss using the Lisson test
©Centexbel 2014 | Pagina 7
NORMEN VOOR VLOERBEKLEDING
ISO 13750:2000
Textile floor coverings - Determination of resistance to staining by acid food colours
EN 14900:2006
Textile floor coverings - Determination of the density of the textile fleece backing
EN 15115:2006
Textile floor coverings - Determination of sensitivity to spilled water
ISO 17504:1999
Textile floor coverings - Determination of wool fibre integrity using an abrasion machine
ISO 17984:2014
Machine-made textile floor coverings - Determination of dimensional changes after
exposure to heat and/or water
ISO 24339:2006
Laminate and textile floor coverings - Determination of dimensional variations after
exposure to humid and dry climate conditions
EN ISO 24341:2012
Resilient and textile floor coverings - Determination of length, width and straightness
of sheet (ISO 24341:2006)
EN ISO 24342:2012/A1:2012
Resilient and textile floor-coverings - Determination of side length, edge straightness
and squareness of tiles - Amendment 1 (ISO 24342:2007/Amd 1:2012)
©Centexbel 2014 | Pagina 8
NORMEN VOOR VLOERBEKLEDING
NORMEN VOOR LAMINAAT VLOERBEKLEDING
Algemene normen
Productnormen
Testnormen
CEN/TS 14472-3:2003
Resilient, textile and laminate floor coverings - Design, preparation and installation Part 3: Laminate floor coverings
EN 13329:2006+A1:2008
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
ISO 14486:2012
Laminate floor coverings - Specification
EN 14978:2006
Laminate floor coverings - Elements with acrylic based surface layer, electron beam
cured - Specifications, requirements and test methods
EN 15468:2007
Laminate floor coverings - Elements with directly applied printing and resin surface
layer - Specifications, requirements and test methods
EN 16511:2014
Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with
wear resistant top layer
CEN/TS 16354:2013
Laminate floor coverings - Underlays - Specification, requirements and test methods
EN 425:2002
Resilient and laminate floor coverings - Castor chair test
ISO 6356:2012
Textile and laminate floor coverings - Assessment of static electrical propensity - Walking test
EN 16094:2012
Laminate floor coverings - Test method for the determination of micro-scratch resistance
ISO 24334:2006
Laminate floor coverings - Determination of locking strength for mechanically assembled panels
ISO 24335:2006
Laminate floor coverings - Determination of impact resistance
ISO 24336:2005
Laminate floor coverings - Determination of thickness swelling after partial immersion
in water
ISO 24337:2006
Laminate floor coverings - Determination of geometrical characteristics
ISO 24338:2006
Laminate floor coverings - Determination of abrasion resistance
ISO 24339:2006
Laminate and textile floor coverings - Determination of dimensional variations after
exposure to humid and dry climate conditions
EN ISO 24343-1:2012
Resilient and laminate floor coverings - Determination of indentation and residual
indentation - Part 1: Residual indentation (ISO 24343-1:2007)
ISO 24343-2:2011
Resilient and laminate floor coverings - Determination of indentation and residual
indentation - Part 2: Short-term residual indentation of resilient floor covering
ISO 24343-3:2011
Resilient and laminate floor coverings - Determination of indentation and residual
indentation - Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
ISO 25620:2008
Laminate floor coverings - Determination of long-side friction for mechanically assembled panels
©Centexbel 2014 | Pagina 9