DC YLF UV Series - Photonics Industries International

DC-351 Series
Nd:YLF UV Lasers
DC-351 Series Features
•
•
•
•
351 nm Wavelength
Compact, Rugged, Air-Cooled Design
Patented Intracavity UV Generation
Pulse Repetition Rates from Single Shot to 10
kHz
• TEM00 Beam with Typical M2 < 1.2
• RS232 Computer Control
• External TTL Triggering
As the first company to pioneer intracavity harmonic generation technologies and introduce the very first intracavity UV lasers in 1996, Photonics Industries remains an industry leader in
producing efficient, simple, low cost of ownership (COO) lasers. Its DC Series offers high UV pulse
energies with the best mode quality in the market.
Owing to key patented technologies, intracavity harmonic generation is inherently a more efficient harmonic conversion that provides better pulse to pulse stability and mode quality as well as
a much simpler, more compact laser configuration. In addition to its patented intracavity UV generation, the end-pumped geometry of Photonics Industries’ DC Series lasers results in even better
mode quality and field replaceable pump diodes, for the lowest COO possible.
*For higher power UV models please see the DS Series.
390 Central Ave, Bohemia, NY, 11716
Phone: 631-218-2240
Fax: 631-218-2275
E-Mail: [email protected]
Website: www.Photonix.com
DC-351 System Specifications
Technology
Air-Cooled
Model
DC50-351
DC100-351
Wavelength (nm)
DC150-351
351
Average Power @ 3 kHz
500 mW
1W
1.5 W
Pulse Energy @ 1 kHz
~0.25 mJ
~0.5 mJ
~1 mJ
~25 ns
~20 ns
Pulse Width @ 1 kHz (nominal)
~25 ns
Repetition Rate
1 Hz 10 kHz
Pulse to Pulse Instability
<3% rms
Polarization Ratio
Horizontal; 100:1
4σ Beam Diameter @ exit
~ 0.4 mm
Beam Divergence (Full Angle Far Field)
<2 mrad
Beam Circularity
~85%
Spatial Mode
TEM00 - M2<1.2
TEM00 - M2<1.5
Beam Pointing Stability
<25 urad
Beam Position Accuracy
< 2.5 mm and < 1° from nominal
Long Term Instability (8 hr ± 1° C)
±2%
Interface
RS 232 / GUI / External TTL Triggering
Maximum Heat Load (laser head)
<200 W
<5 min from standby
Warm Up Time
<20 min from cold start
Electrical Requirement
Dimensions
50 to 60 Hz or 100 V to 240 V
4 in x 4.75 in x 8.66 in
Laser Head
(W x H x L)
Controller
Weight
Laser Head
6.5 lbs
Controller
10 lbs
11.5 in x 3.5 in x 9.5 in
Relative Humidity
14.75 in x 3.5 in x 11 in
Non-condensing, 90% Max
Umbilical Length
3m
Ambient Temperature
15 to 35 C (59 to 95oF) Operating Range
o
o
o
Performance Curve
Power (W)
1.8
1.6
DC50-351
1.4
DC100-351
DC150-351
1.2
1
0.8
0.6
0.4
0.2
0
0
2
4
6
Repetition Rate (kHz)
8
10
12
Dimensional Drawings
REV
B
DESCRIPTION
SIGN DATE APPRV SIGN
DATE
SHEET 1 OF 1
1/24/14
DC-351 Laser Head
0.50in
12.7mm
3.50in
88.9mm
7.78in
197.5mm
2.50in
63.5mm
1.50in
38.1mm
2.25in
57.2mm
1.18in
29.9mm
2.00in
50.8mm
DESCRIPTION
SIGN DATE APPRV SIGN
7.48
190.0mm
0.29in
7.4mm
4.00in
101.6mm
DATE
DC50, DC100-351 Controller
SHEET 1 OF 1
DC150-351 Controller
7/16/13
NOTES:
FILE NAME:
QTY.
1. Break sharp corners with chamfers: 0.01 at 45
REV.
B
PROJECT
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
2. Finish:
REV
A
PHOTONICS INDUSTRIES
INTERNATIONAL, INC.
390 Central Avenue,
Bohemia, NY, 11716
Tel: (631)218-2240 Fax:(631)218-2275
DO NOT SCALE DRAWING
SURFACE NAME
DESCRIPTION
SIGN DATE APPRV
SIZE A TOLERANCES:
DCH-355-0.5/1/3
02/11/13
INITIAL
RELEASE63
0.01
LINEAR:
SCALE 1:2 ANG: 0.25
OD
4
5
M-4055
DWG. NO.
DATE
DESIGN 01.24.14
CHECK 01.24.14
APPV. 01.24.14
MATERIAL:
THESE DRAWING AND SPECIFICATION ARE
THE PROPERTY
SIGN
DATEOF PHOTONICS INDUSTRIES
AND SHALL NOT BE REPRODUCED OR USED
WITHOUT WRITTEN PERMISSION FROM
PHOTONICS INDUSTRIES International, Inc.
2
3
OFF
SHEET 1 OF 1
1
ON
FAULT
LASER
ENABLE
REMOTE
ON
PREVIOUS
MENU
ON
3.50in
88.9mm
Q-SW
SHUTTER
ON
HOME
3.50in
88.9mm
SIGN
NAME
M.S.
Z.S.Z.
Y. Y.
ENTER
CANCEL
LDD
NEXT
POWER
14.75in
374.7mm
FRONT VIEW
11.00in
279.4mm
11.50in
292.1mm
9.50in
241.3mm
RIGHT VIEW
<-FRONT
DWG. NO.
M-
REV.
A
FILE NAME:ACAD/DCM DRIVER OD
QTY.
PROJECT
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
SIZE
A
TOLERANCES:
LINEAR: 0.01
0.25
SCALE 1:2 ANG:
4
5
DWG. NO.
M-4078
REV.
C
PHOTONICS INDUSTRIES
INTERNATIONAL, INC.
390 Central Avenue,
Bohemia, NY, 11716
DATE
DESIGN 07.16.13
NAME
M.S.
SIGN
US
Main
07.16.13 Office
CHECK
Z.S.Z.
QTY.
PROJECT
Tel: (631)218-2240 Fax:(631)218-2275 APPV. 07.16.13
Y. Y.
390
Central
Ave,
UNLESS OTHERWISE SPECIFIED:
DO
NOT
SCALE
DRAWING
MATERIAL:
AL.
5052
DIMENSIONS ARE IN INCHES
SURFACE NAME
Bohemia,
NY,
11716
SIZE A TOLERANCES:
DCL
63
LINEAR: 0.01
SCALE 1:3 ANG: 0.25
DRIVER OD
Tel: 631-218-2240
2
3
1
Fax: 631-218-2275
E-Mail: [email protected]
Website: www.Photonix.com
FILE NAME:ACAD/DC,DS10 DRIVER OD
THESE DRAWING AND SPECIFICATION ARE
THE PROPERTY OF PHOTONICS INDUSTRIES
AND SHALL NOT BE REPRODUCED OR USED
WITHOUT WRITTEN PERMISSION FROM
PHOTONICS INDUSTRIES International, Inc.
5
4
Korea Office
703 Sogong Bldg, 352-5 Gugal-Dong
Giheung-gu, Yongin City
Gyeonggi-Do, 446-569 Korea
Tel: +82-31-284-9520
Fax: +82-31-284-9521
Contact: Sang-Moon Kim
Email: [email protected]
Japan Office
Rokusan Bldg. 9F, Funamachi 7
Shinjuku-ku, Tokyo 160-0006, Japan
Tel: +81 03-6423-1805
Fax: +81 03-6423-1806
Email: [email protected]
PHOTONICS INDUSTRIES
INTERNATIONAL, INC.
390 Central Avenue,
Bohemia, NY, 11716
Tel: (631)218-2240
Fax:(631)218-2275
DO NOT SCALE DRAWING
SURFACE NAME
63
3
DCM
DRIVER OD
2
SIGN
DATE
NAME
DESIGN 02.11.13
M.S.
CHECK 02.11.13
Z.S.Z.
APPV. 02.11.13
Y. Y.
MATERIAL: ALLOY 5052 AL. SHEET
THESE DRAWING AND SPECIFICATION ARE
THE PROPERTY OF PHOTONICS INDUSTRIES
AND SHALL NOT BE REPRODUCED OR USED
WITHOUT WRITTEN PERMISSION FROM
PHOTONICS INDUSTRIES International, Inc.
1
Taiwan Office
18F-3,No.77,Sec.1,Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan
Tel : 886-2-26983620
Fax: 886-2-26983630
Contact: Brett Chiang
E-mail: [email protected]
China Office
Room 1401, B8
208 XingHai Street, Suzhou Industrial Park
Suzhou 215021, P. R. China
Tel: +86-512-6763 5761
Fax: +86-512-6763 5762
Email: [email protected]
Website: http://www.photonix.com.cn/
Due to Photonics Industries’ commitment to continuous product improvement, specifications and drawings are subject to change without notice.
Photonics Industries conforms to provisions of US 21 CFR 1040.10 & 1040.11 and is made under one or more US patents listed below:
7,346,092: 7,082,149: 7.079,557: 6,999,483: 6,980,574: 6,961,355: 6,842,293: 6,762,405: 6,690,692: 6,587,487: 6,584,487: 6,366,596:
6,327,281: 6,356,578: 6,246,707: 6,229,839: 6,108,356: 6,061,370: 6,028,620: 5,936,938: 5,898,717 and Pending Patents
Copyright © 2013 by Photonics Industries International, Inc.

Download Report