BMS Automation Protocol Converter

San Telequip (P) Ltd.,
4 Crystal House, 235, Navi Peth
Off LBS Road, Pune 411 030, India
Phone : 91-20- 24320023, 24334423, 65001587
email : [email protected]
Connecting. Converting. Leading !
.
BMS Automation Protocol Converter
BMS Converter is an external Building and Industrial Automation multi-protocol
device server for OEMs wanting to provide protocol translation between Serial-Serial,
Serial- Ethernet and Ethernet-Ethernet devices using LonWorks®, BACnet, Metasys
N2, Modbus and more.
The extensive driver library, coupled with our experience in protocol translation
gateways provides the OEM customer with confidence that their products will meet
the foreign networks requirements for interfacing.
The Converter includes all the hardware and software to enable the customer’s products to interface
to various networks. Each Bacnet Converter is provided with the necessary protocol drivers. Multiple
drivers can be installed on a single Converter. We can provide custom driver support when needed.
Features/Benefits
√
√
√
√
√
√
The most flexible and versatile multi-protocol Device Server on the market.
Supports virtual nodes allowing multiple OEM controllers to connect to a single converter and
seen as separate controllers on the various field networks.
TRUE protocol translation and not Protocol packet Encapsulation.
Interfaces to over 85 Building and Industrial Automation Protocols.
Multi-Client and Multi-Server support ensures interoperability between any Industrial and or
Building Automation protocols.
Flash upgradeable.
Specifications
SERIAL PORT : 1
RS-485, 2 Wire, 2 Pin Screw type terminal.
SERIAL PORT : 2 ( Optional depending on the second Protocol selected )
RS-485, 2 Wire, 2 or 3 Pin Screw type terminal.
1 Ethernet
: 10/100 Ethernet port
Connector
: RJ45
Indications
: LED’s for Tx, Rx, Power
Operating
Power Requirements
Connector
: 24V DC, Range 18 to 30 VDC
: 2 Pin Screw type
Environmental
Operating Temp.
Relative Humidity
: -40°C to 85°C
: 5-90% RH, non-condensing
Enclosure
Dimensions(Lx W x H) : 10.0 x 7.0 x 4.2 cm (GW BMS01 ,GW BMS 02 & GW BMS 05)
: 9 . 5 x 10.0 x 4.2 cm (GW BMS 03)
: 9.7 x 8.1 x 4.2 cm
(GW BMS 04 & GW BMS 02-02)
Mounting
: DIN Rail
Approvals
BACnet Testing Labs (BTL) pending
San Telequip (P) Ltd.,
4 Crystal House, 235, Navi Peth
Off LBS Road, Pune 411 030, India
Phone : 91-20- 24320023, 24334423, 65001587
email : [email protected]
Supported Host Side Protocols
RS-485
Modbus RTU
Allen Bradley DF1
BACnet MS/TP
Metasys N2
LON
Ethernet (10/100Base-T) to the OEM’s
device:
Allen Bradley EtherNet/IP
BACnet IP
BACnet Ethernet
Modbus TCP/IP
Supported field protocols: Automation Protocols
RS-485
Allen Bradley DF1
DNP 3.0
TL1
Telnet
Ethernet (10/100BaseT)
Allen Bradley CSP
GE-EGD
GE-SRTP
OPC, SNMP
Connecting. Converting. Leading !
.
San Telequip (P) Ltd.,
4 Crystal House, 235, Navi Peth
Off LBS Road, Pune 411 030, India
Phone : 91-20- 24320023, 24334423, 65001587
email : [email protected]
Connecting. Converting. Leading !
.
Ordering Information :
Model
Protocols handled
GW BMS 01
Mobus RTU
BACnet IP
GW BMS 02
GW BMS 02-02
BACnet MSTP
BACnet MSTP (2 RS485 ports)
Modbus RTU (2 RS485 ports)
Metasys N2 (2 RS485 ports)
Metasys N2 & BACnet MSTP(1 & 2 RS485 ports Resp.)
(At One time 3 Protocol Supports)
BACnet IP
BACnet IP
BACnet IP
BACnet IP
BACnet IP
GW BMS 03 A
GW BMS 03 B
GW BMS 03 B
BACnet IP
Modbus RTU
BACnet MSTP
Lonworks
Lonworks
Lonworks
GW BMS 04-A
GW BMS 04-B
GW BMS 04-C
GW BMS 04-D
Modbus RTU
BACnet IP
BACnet MSTP
BACnet MSTP
Metasys N2
Metasys N2
Metasys N2
Mobus RTU
GW BMS 05-A
GW BMS 05-B
GW BMS 05-C
BACnet IP
SNMP
SNMP
Modbus TCP
BACnet IP
Modbus TCP
NOTE :
1. 31 devices can be multidropped on the Modbus RTU / BACnet MSTP / N2 side.
2. Depending on site conditions this figure may increase or decrease.
3. 485 Repeater may have to used in between the 485 chain to meet basic 485 critera’s.
4. Max 1500 points can be mapped from Modbus RTU to BACnet IP & vica versa.
5. 750 SNVT’s can be mapped on LON Gateway.

Download Report