Inflating tool type NXQ-ZG
1.　General
The inflating tools are used to inflate, reflate, gas
release when pressure is too high or check the
pressure, and they are the indispensable
accessories for accumulators with characteristics of
compact structure, safe and reliable, pressureresistant, impact-resistant, convenient usage and
so on.
2. Specification
NXQZG
1)
Operating pressure is 16MPa, and the range of pressure gauge
is 25 MPa
Pressure ratings
16 1) =
16MPa
25 2) =
25MPa
2)
Operating pressure is 25MPa, and the range of pressure gauge
is 40MPa
Note: If lower range of pressure gauge is needed, please
indicate when ordering.
Inflating(Nitrogen ) tool
3. Outline and connection dimensions
M 14x1.5 pipe fitting, when for pressure testing,
take off the pipe fitting and install the screw plug M 14x1.5 .
Connected with the inflating inlet
Air release valve
( Air release outlet )
×
A
B
1
2
Connected with
the connection of
Nitrogen container
3 4
C
D
E
1 Pressure gauge
A Operating handle
D Tightening nut
2 Fitting
3 Nut
4 Flexible pressure pipe (L=900mm)
B Air release valve
C Connected with the flexible pressure pipe
E Connected with the inflating inlet of the accumulator
4. Details　for　inflating　tool
See Bladder accumulator type NXQ.
1/1 www.shlixin.com
440

198-MSA Flow control valve

Page 1 Analysis on Injection Molding of Micro Step Grooves Page 2

Indexator XR Rotators XR Series Rotators