Use Hardware Configurations Overview The LTM R controller, either alone or connected to an LTM E expansion module, can be operated with or without a user interface device. In any configuration, the LTM R controller can be configured to perform monitoring, fault management, motor protection and control functions. All user interface devices require an independent power source. Communications User interface devices and their communications interfaces include: User interface device Communicates via the Magelis XBTN410 HMI HMI port via the local RJ45 connector on the LTM R controller or LTM E expansion module TeSys® T LTM CU Control Operator Unit HMI port via the local RJ45 connector on the LTM R controller or LTM E expansion module PC running SoMove with the TeSys T DTM HMI port via the local RJ45 connector on the LTM R controller or LTM E expansion module Network PLC Network port on the LTM R controller via the network RJ45 connector or terminal wiring ® NOTE: For any instructions about the LTM CU, see the TeSys® T LTM CU Control Operator Unit User’s Manual. 1639501 03/2013 245
© Copyright 2024 ExpyDoc
