Data Sheet - Unex Technology

GNSS/HSM Carrier Board for VTX-201, SL869/SLE97
Model: PCB-201 (Preliminary Specifications)
PCB-201 is a GNSS and Hardware Security Module (HSM) carrier board
designed for VTX-201 to shorten V2X On-Board-Unit (OBU) development
cycle with optimized performance. Extensive connectivity provides high
integrative flexibility. Automotive-grade components ensure reliability in
the harshest outdoor environment.
Unique Features:
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
High-performance GNSS receiver provides accurate positioning at 10Hz refresh rate. Optional low latency
algorithm reduces positioning latency which is essential for tracking in high mobility vehicles and future
autonomous vehicles.
On board DIP switch for solo GNSS module test or firmware upgrade through DB9 RS232 interface.
V2X Hardware Security Module (HSM) ensures private keys are stored in a tamper proof device.
microSD socket to use flash memory for logging purpose.
On Board programmable delay ON circuitry (default 200ms) for cracking delay function.
Dual DC 6-32V power inputs: one 4-pin power connector supporting Vbatt. (Power-In) and ACC for automotive
application; one DC power round jack for trials or small-scale deployment.
40V 3000W passive TVS and active IC LTC4365 and 80V dual MOS ensure robust UV/OV/RV protection on ACC
trail.
40V 3000W passive TVS on Vbatt trial to LT3014 to GNSS VRTC circuitry provides GNSS hot start power trial
protectionl.
Extensive connectivity in 121x104.4mm PCBA size provides the most flexible integration options: one
10/100Mbps Ethernet port, two CAN ports, one RS232 console, one audio jack, one microSD socket, and GPIO
pins.
Two DSRC MMCX antenna connectors support receiver diversity and enable robust assembly.
High ESD protection circuit and ESD ground cable design ensure immunity and robustness of antenna and CAN
ports in ESD events.
Automotive-grade -40°C ~ +85°C components (excluding Infineon SLE97) ensure environmental reliability.
RoHS compliance meets environment-friendly requirements.
Optional DC 5.0V/1.5A power-out 4-pin power connector provides integrative flexibility.
[Unex] - 0.98 - 20141218 preliminary spec.
P. 1
Mechanical Outline: 121mm x 104.4mm
GPIO pins
50-PIN connector for VTX-201
Console
GPS FAKRA
type C connector
Ethernet
Audio Jack
CAN2
DC 9-30V
round Jack
DC 9-30V
4-PIN Jack
CAN1
microSD socket
Optional 4-pin DC 5.0V/0.5A
power-ont
Specifications:
Chipset
Driver
GNSS accuracy
Power Supply
Operation Voltage
Power Consumption
Interface
Antenna Connector
Operation Temperature Range
Storage Temperature Range
Operating Humidity
Storage Humidity
Environment-Friendly
Compliance
Dimension
Telit SL869 GNSS module
Infineon SLE97 Hardware Security Module (HSM)
pre-integrated in VTX-201
TBC
dual DC 6-32V power inputs:
▪ one 4-pin power connector supporting Vbatt. (Power-In) and ACC;
▪ one DC power round jack
DC 6-32 V ± 5%
TBD
▪ two DB-9 female CAN ports
▪ one 10/100Mbps Ethernet port
▪ one DB-9 male RS232 console
▪ one audio jack
▪ one switch button
▪ one microSD socket for flash memory
▪ one 8-pin GPIO
two MMCX for DSRC, one MMCX for GPS
(optional GPS FAKRA male type C antenna connector by project)
ambient -40°C ~ +85°C (Infineon SLE97 Hardware Security Module supports -20°C ~
+85°C , will change to SLI97 on H2/2015 production to support -40°C ~ +85°C)
-45°C ~ +90°C
10% ~ 95%, non-condensing
max. 95%, non-condensing
RoHS
121 mm(L) x 104.4mm(W)
[Unex] - Ver. 0.98 - 20141218 preliminary spec.
P. 2
Ordering Information:
PCB-201
GNSS/HSM Carrier Board for VTX-201, SL869/SLE97
Recommended Modules:
VTX-201
DSRC V2X Communication Module, Autotalks V2X chipset
VTX-201E
VTX-201 with pre-integrated ETSI G5 Protocol Stacks
VTX-201U
VTX-201with pre-integrated IEEE 1609.x Protocol Stacks
Recommended Application Scenarios of PCB-201:
1. V2X On-Board-Unit: mounting VTX-201 on PCB-201
VTX-201
PCB-201
[Unex] - Ver. 0.98 - 20141218 preliminary spec.
P. 3
2. V2X Road-Side-Unit: mounting VTX-201 on PCB-201. Connecting to existing outdoor Wi-Fi AP through Ethernet
port. Painlessly enable V2X through Unex’s OSLink and SDK.
Ethernet to Ethernet
VTX-201 + PCB-201
Existing outdoor Wi-Fi AP Platform
Unex Technology Corp.
[email protected]
http://www.unex.com.tw
- All Connected
[Unex] - Ver. 0.98 - 20141218 preliminary spec.
P. 4