METAL COATING POLURENE OK-HP New Aromatic Aliphatic Isocyanurate High Solvent Compatibility Fast Drying Full Compatibility with Acrylic resin Low yellowing POLURENE OK-HP is recommended for the formulation of 2k PU acrylic coating, fast drying with reduced yellowing. TYPICAL PROPERTIES % NV 60.0 ± 2 Solvent Butyl acetate % of NCO 9.8 ± 0.5 Viscosity (mPa*s @ 23°C) 350 ± 150 Viscosity (Gardner) F – L Colour (Gardner) 1 MAX Aspect Clear POLURENE OK-HP is recommended for the formulation clear topcoat from mat to high gloss. In pigmented cycle can be a good alternative for the sealer instead the full aliphatic hardener to speed up the curing. OK‐HP Cycle 1st coat 2nd coat Aromatic Aliphatic Type Polurene OK-HP Full Aliphatic Compatibility with acrylic www.sapici.it [email protected] Aliphatic Cycle Acrylic Acrylic + + Polurene Aliphatic OK‐HP Acrylic Acrylic + + Polurene Aliphatic OK‐HP Pigmented Acrylic Acrylic Topcoat + + High Gloss Aliphatic Aliphatic
© Copyright 2024 ExpyDoc