Stepan’s Liquid Cleansing Formulations for Triclosan Replacement Self-Foaming Hand Soaps with 0.125% Benzalkonium Chloride* Experience delightful sensorial properties and foam appearance at low actives level versus market leading Triclosan containing brands. These formulations are sulfate-free, stable and provide a low viscosity solution suitable for foamer packaging handsoap products. After generating creamy foam with one or two pumps, rich lather and soft skin feel is experienced. Visit www.stepan.com for more information or contact U.S. Technical Service at [email protected]. *No efficacy data will be provided. The formulations depicted herein use Benzalkonium Chloride at the FDA tentative monograph level of 0.125% active. SELF-FOAMING HAND SOAP FORMULATIONS Sulfate-Free Pump Foamer Hand Soap With Benzalkonium Chloride and Betaine Sulfate-Free Pump Foamer Hand Soap With Benzalkonium Chloride and Amine Oxide (No. 1222) (No. 1223) Ingredients Deionized Water Sodium Hydroxide, 50% Solution Hydroxyethylcellulose STEPANQUAT® 50 NF AMPHOSOL® HCG AMMONYX® CETAC-30 STEPAN-MILD® L3 Sodium Citrate, 10% Solution Citric Acid Preservative, Dye, and Fragrance Total % by Weight q.s to 100.00 q.s. 0.05 0.25 3.00 6.00 0.25 2.50 q.s. q.s. 100.00 Ingredients % by Weight Deionized Water q.s to 100.00 Sodium Hydroxide, 50% Solution q.s. Hydroxyethylcellulose 0.05 STEPANQUAT® 50 NF 0.25 AMMONYX® CETAC-30 6.00 AMMONYX® LO 3.00 STEPAN-MILD® L3 0.25 Sodium Citrate, 10% Solution 2.50 Citric Acid q.s. Preservative, Dye, and Fragrance q.s. Tackiness During Drying Total 100.00 5 4 Sensory Skin After-Feel Properties Foam Appearance Tackiness During Drying 53 42 3 1 2 Skin Softness Skin T 0 1 Formulation No. 1222 Leading Brand Foaming HS (Benzalkonium Chloride) Formulation No. 1223 Leading Brand Foaming HS (Triclosan) Procedure: 2 pumps using an F2 L-11 pump foamer Skin Softness 0 Skin Tightness Skin Dryness Skin Dryness Formulation No.1223 1222 Formulation No. Leading Brand Foaming Formulation No. 1223 HS (Benzalkonium Chloride) Formulation No. Foaming 1222 Leading Brand HS (Benzalkonium Chloride) Leading Brand Foaming HS (Triclosan) Leading Brand Foaming HS (Triclosan) The numbers reflect the median score given to a sample (5=best, 0=worst) in panel testing with 5 panelists Premium Sulfate-Free Hand Soap with 0.125% Benzalkonium Chloride* Ensure consumer delight with quick flash foam, ease of lather generation and clean rinsing with this sulfate-free hand soap. This high-foaming formulation, designed to provide an alternative to the traditional anionic-based liquid hand soaps, is compatible with small amounts of hydrophilic cationic surfactants. This versatile formulation delivers a pleasurable experience even when diluted. Visit www.stepan.com for more information or contact U.S. Technical Service at [email protected]. Flash Foam *No efficacy data will be provided. The formulations depicted herein use Benzalkonium Chloride at the FDA tentative monograph5level of 0.125% active. 4 FORMULATION Foam Analysis Using Foam Spin 3 Premium Sulfate-Free Hand Soap With Benzalkonium Chloride 140 2 120 Skin Tightness (No. 1224) Fo 1 Flash Foam % by Weight q.s to 100.00 27.25 5.50 1.50 1.00 0.10 0.50 0.26 q.s. q.s. q.s. 100.00 Foam Height (ml) Ingredients Deionized Water AMPHOSOL® LB AMPHOSOL® CS-50 STEPAN® SLL-FB STEPAN-MILD® GCC Polyquaternium-7 PEG-150 Distearate STEPANQUAT® 50NF Citric Acid, 50% Solution Sodium Hydroxide, 50% Solution Preservative and Fragrance Total 100 0 80 60 40 20 Tackiness 40 60 80 2 Skin Tightness 1 140 100 ppm by weight of the sample per 150 mL test solution 5 3 120 Formulation No. 1224 Leading Manufacturer HS (Benzalkonium Chloride) Leading Manufacturer HS (Triclosan) Flash Foam 4 Skin Tightness 100 Time (sec.) 5 Sensory Properties 4 Rinsability 0 Foam Appearance 3 2 Foam Feel 1 Foam Feel 0 0 Formulation No. 1224 Tackiness Tackiness Rinsability Rinsability Formulation No. 1224 Leading Manufacturer HS (Benzalkonium Chloride) Leading Manufacturer HS (Triclosan) Stepan High-Foaming HS (Benzalkonium Chloride) Leading Manufacturer HS ( Benzalkonium Chloride) The numbers reflect the median score given to a sample Leading Manufacturer HS ( Triclosan) (5=best, 0=worst) in panel testing with 5 panelists Leading Manufacturer HS (Triclosan) Leading Manufacturer HS (Benzalkonium Chloride) Procedure SM 287-A : 1 ml of sample used to generate lather © 2014 Stepan Company. All rights reserved. Disclaimer: Nothing contained herein grants or extends a license, expressed or implied, in connection with patents, issued or pending, of the manufacturer or others. The information contained herein is based on the manufacturer’s own study and the work of others. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or adequacy of the information contained herein. THE MANUFACTURER SHALL NOT BE LIABLE (REGARDLESS OF FAULT) TO THE VENDEE’S EMPLOYEES, OR ANYONE FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE ACCURACY, COMPLETENESS ADEQUACY OR FURNISHING OF SUCH INFORMATION. AMPHOSOL®, AMMONYX®, STEPAN®, STEPAN-MILD®, and STEPANQUAT® are registered trademarks of Stepan Company. November 2014
© Copyright 2024 ExpyDoc
